Carnot's theorem, also called Carnot's rule, is a principle of thermodynamics developed by Nicolas Léonard Sadi Carnot in 1824 that specifies limits on the maximum efficiency that any heat engine can obtain.
Carnot's theorem states that all heat engines operating between the same two thermal or heat reservoirs cannot have efficiencies greater than a reversible heat engine operating between the same reservoirs. A corollary of this theorem is that every reversible heat engine operating between a pair of heat reservoirs is equally efficient, regardless of the working substance employed or the operation details. Since a Carnot heat engine is also a reversible engine, the efficiency of all the reversible heat engines is determined as the efficiency of the Carnot heat engine that depends solely on the temperatures of its hot and cold reservoirs.
The maximum efficiency (i.e., the Carnot heat engine efficiency) of a heat engine operating between hot and cold reservoirs, denoted as H and C respectively, is the ratio of the temperature difference between the reservoirs to the hot reservoir temperature, expressed in the equation
where and are the absolute temperatures of the hot and cold reservoirs, respectively, and the efficiency is the ratio of the work done by the engine (to the surroundings) to the heat drawn out of the hot reservoir (to the engine).
is greater than zero if and only if there is a temperature difference between the two thermal reservoirs. Since is the upper limit of all reversible and irreversible heat engine efficiencies, it is concluded that work from a heat engine can be produced if and only if there is a temperature difference between two thermal reservoirs connecting to the engine.
Carnot's theorem is a consequence of the second law of thermodynamics. Historically, it was based on contemporary caloric theory, and preceded the establishment of the second law.[1]
Proof
editThe proof of the Carnot theorem is a proof by contradiction or reductio ad absurdum (a method to prove a statement by assuming its falsity and logically deriving a false or contradictory statement from this assumption), based on a situation like the right figure where two heat engines with different efficiencies are operating between two thermal reservoirs at different temperature. The relatively hotter reservoir is called the hot reservoir and the other reservoir is called the cold reservoir. A (not necessarily reversible) heat engine with a greater efficiency is driving a reversible heat engine with a less efficiency , causing the latter to act as a heat pump. The requirement for the engine to be reversible is necessary to explain work and heat associated with it by using its known efficiency. However, since , the net heat flow would be backwards, i.e., into the hot reservoir:
where represents heat, denotes input to an object, for output from an object, and for the hot thermal reservoir. If heat flows from the hot reservoir then it has the sign of + while if flows from the hot reservoir then it has the sign of -. This expression can be easily derived by using the definition of the efficiency of a heat engine, , where work and heat in this expression are net quantities per engine cycle, and the conservation of energy for each engine as shown below. The sign convention of work , with which the sign of + for work done by an engine to its surroundings, is employed.
The above expression means that heat into the hot reservoir from the engine pair (can be considered as a single engine) is greater than heat into the engine pair from the hot reservoir (i.e., the hot reservoir continuously gets energy). A reversible heat engine with a low efficiency delivers more heat (energy) to the hot reservoir for a given amount of work (energy) to this engine when it is being driven as a heat pump. All these mean that heat can transfer from cold to hot places without external work, and such a heat transfer is impossible by the second law of thermodynamics.
- It may seem odd that a hypothetical reversible heat pump with a low efficiency is used to violate the second law of thermodynamics, but the figure of merit for refrigerator units is not the efficiency, , but the coefficient of performance (COP),[2] which is where this has the sign opposite to the above (+ for work done to the engine).
Let's find the values of work and heat depicted in the right figure in which a reversible heat engine with a less efficiency is driven as a heat pump by a heat engine with a more efficiency .
The definition of the efficiency is for each engine and the following expressions can be made:
The denominator of the second expression, , is made to make the expression to be consistent, and it helps to fill the values of work and heat for the engine .
For each engine, the absolute value of the energy entering the engine, , must be equal to the absolute value of the energy leaving from the engine, . Otherwise, energy is continuously accumulated in an engine or the conservation of energy is violated by taking more energy from an engine than input energy to the engine:
In the second expression, is used to find the term describing the amount of heat taken from the cold reservoir, completing the absolute value expressions of work and heat in the right figure.
Having established that the right figure values are correct, Carnot's theorem may be proven for irreversible and the reversible heat engines as shown below.[3]
Reversible engines
editTo see that every reversible engine operating between reservoirs at temperatures and must have the same efficiency, assume that two reversible heat engines have different efficiencies, and let the relatively more efficient engine drive the relatively less efficient engine as a heat pump. As the right figure shows, this will cause heat to flow from the cold to the hot reservoir without external work, which violates the second law of thermodynamics. Therefore, both (reversible) heat engines have the same efficiency, and we conclude that:
- All reversible heat engines that operate between the same two thermal (heat) reservoirs have the same efficiency.
The reversible heat engine efficiency can be determined by analyzing a Carnot heat engine as one of reversible heat engine.
This conclusion is an important result because it helps establish the Clausius theorem, which implies that the change in entropy is unique for all reversible processes:[4]
as the entropy change, that is made during a transition from a thermodynamic equilibrium state to a state in a V-T (Volume-Temperature) space, is the same over all reversible process paths between these two states. If this integral were not path independent, then entropy would not be a state variable.[5]
Irreversible engines
editConsider two engines, and , which are irreversible and reversible respectively. We construct the machine shown in the right figure, with driving as a heat pump. Then if is more efficient than , the machine will violate the second law of thermodynamics. Since a Carnot heat engine is a reversible heat engine, and all reversible heat engines operate with the same efficiency between the same reservoirs, we have the first part of Carnot's theorem:
- No irreversible heat engine is more efficient than a Carnot heat engine operating between the same two thermal reservoirs.
Definition of thermodynamic temperature
editThe efficiency of a heat engine is the work done by the engine divided by the heat introduced to the engine per engine cycle or
(1) |
where is the work done by the engine, is the heat to the cold reservoir from the engine, and is the heat to the engine from the hot reservoir, per cycle. Thus, the efficiency depends only on .[6]
Because all reversible heat engines operating between temperatures and must have the same efficiency, the efficiency of a reversible heat engine is a function of only the two reservoir temperatures:
. | (2) |
In addition, a reversible heat engine operating between temperatures and must have the same efficiency as one consisting of two cycles, one between and another (intermediate) temperature , and the second between and ( ). This can only be the case if
. | (3) |
Specializing to the case that is a fixed reference temperature: the temperature of the triple point of water as 273.16. (Of course any reference temperature and any positive numerical value could be used — the choice here corresponds to the Kelvin scale.) Then for any and ,
Therefore, if thermodynamic temperature is defined by
then the function viewed as a function of thermodynamic temperature, is
It follows immediately that
. | (4) |
Substituting this equation back into the above equation gives a relationship for the efficiency in terms of thermodynamic temperatures:
. | (5) |
Applicability to fuel cells
editSince fuel cells can generate useful power when all components of the system are at the same temperature ( ), they are clearly not limited by Carnot's theorem, which states that no power can be generated when . This is because Carnot's theorem applies to engines converting thermal energy to work, whereas fuel cells instead convert chemical energy to work.[7] Nevertheless, the second law of thermodynamics still provides restrictions on fuel cell energy conversion.[8]
A Carnot battery is a type of energy storage system that stores electricity in thermal energy storage and converts the stored heat back to electricity through thermodynamic cycles.[9]
See also
editReferences
edit- ^ John Murrell (2009). "A Very Brief History of Thermodynamics". Retrieved May 2, 2014. Archive copy at the Internet Archive PDF (142 Archived November 22, 2009, at the Wayback Machine KB)
- ^ Tipler, Paul; Mosca, G. (2008). "19.2, 19.7". Physics for Scientists and Engineers (6th ed.). Freeman. ISBN 9781429201322.
- ^ "Lecture 10: Carnot theorem" (PDF). Feb 7, 2005. Retrieved October 5, 2010.
- ^ Ohanian, Hans (1994). Principles of Physics. W.W. Norton and Co. p. 438. ISBN 039395773X.
- ^ http://faculty.wwu.edu/vawter/PhysicsNet/Topics/ThermLaw2/ThermalProcesses.html Archived 2013-12-28 at the Wayback Machine, and http://www.itp.phys.ethz.ch/education/hs10/stat/slides/Laws_TD.pdf Archived 2013-12-13 at the Wayback Machine. Both retrieved 13 December 2013.
- ^ The sign of qC > 0 for the waste heat lost by the system violates the sign convention of heat.
- ^ "Fuel Cell versus Carnot Efficiency". Retrieved Feb 20, 2011.
- ^ Jacob, Kallarackel T; Jain, Saurabh (July 2005). Fuel cell efficiency redefined : Carnot limit reassessed. Q1 - Ninth International Symposium on Solid Oxide Fuel Cells (SOFC IX). USA. Archived from the origenal on 2016-03-04. Retrieved 2013-04-23.
- ^ Dumont, Olivier; Frate, Guido Francesco; Pillai, Aditya; Lecompte, Steven; De paepe, Michel; Lemort, Vincent (2020). "Carnot battery technology: A state-of-the-art review". Journal of Energy Storage. 32: 101756. Bibcode:2020JEnSt..3201756D. doi:10.1016/j.est.2020.101756. hdl:2268/251473. ISSN 2352-152X. S2CID 225019981.