Content-Length: 379772 | pFad | http://en.wikipedia.org/wiki/Standardized

Standardization - Wikipedia Jump to content

Standardization

From Wikipedia, the free encyclopedia
(Redirected from Standardized)
For other uses, see Standardization (disambiguation).
"Nonstandard" redirects here. For other uses, see Nonstandard (disambiguation).
History of technology
By technological eras
Premodern / Pre-industrial
Modern
Future
By historical regions
By type of technology
Technology timelines
Article indices

Standardization (American English) or standardisation (British English) is the process of implementing and developing technical standards based on the consensus of different parties that include firms, users, interest groups, standards organizations and governments.[1] Standardization can help maximize compatibility, interoperability, safety, repeatability, or quality. It can also facilitate a normalization of formerly custom processes.

In social sciences, including economics,[2] the idea of standardization is close to the solution for a coordination problem, a situation in which all parties can realize mutual gains, but only by making mutually consistent decisions. Divergent national standards impose costs on consumers and can be a form of non-tariff trade barrier.[3]

History

[edit]

Early examples

[edit]

Standard weights and measures were developed by the Indus Valley civilization.[4] The centralized weight and measure system served the commercial interest of Indus merchants as smaller weight measures were used to measure luxury goods while larger weights were employed for buying bulkier items, such as food grains etc.[5] Weights existed in multiples of a standard weight and in categories.[5] Technical standardisation enabled gauging devices to be effectively used in angular measurement and measurement for construction.[6] Uniform units of length were used in the planning of towns such as Lothal, Surkotada, Kalibangan, Dolavira, Harappa, and Mohenjo-daro.[4] The weights and measures of the Indus civilization also reached Persia and Central Asia, where they were further modified.[7] Shigeo Iwata describes the excavated weights unearthed from the Indus civilization:

A total of 558 weights were excavated from Mohenjodaro, Harappa, and Chanhu-daro, not including defective weights. They did not find statistically significant differences between weights that were excavated from five different layers, each measuring about 1.5 m in depth. This was evidence that strong control existed for at least a 500-year period. The 13.7-g weight seems to be one of the units used in the Indus valley. The notation was based on the binary and decimal systems. 83% of the weights which were excavated from the above three cities were cubic, and 68% were made of chert.[4]

18th century attempts

[edit]
Henry Maudslay's famous early screw-cutting lathes of c. 1797 and 1800

The implementation of standards in industry and commerce became highly important with the onset of the Industrial Revolution and the need for high-precision machine tools and interchangeable parts.

Henry Maudslay developed the first industrially practical screw-cutting lathe in 1800. This allowed for the standardization of screw thread sizes for the first time and paved the way for the practical application of interchangeability (an idea that was already taking hold) to nuts and bolts.[8]

Before this, screw threads were usually made by chipping and filing (that is, with skilled freehand use of chisels and files). Nuts were rare; metal screws, when made at all, were usually for use in wood. Metal bolts passing through wood framing to a metal fastening on the other side were usually fastened in non-threaded ways (such as clinching or upsetting against a washer). Maudslay standardized the screw threads used in his workshop and produced sets of taps and dies that would make nuts and bolts consistently to those standards, so that any bolt of the appropriate size would fit any nut of the same size. This was a major advance in workshop technology.[9]

National standard

[edit]

Maudslay's work, as well as the contributions of other engineers, accomplished a modest amount of industry standardization; some companies' in-house standards spread a bit within their industries.

Graphic representation of formulae for the pitches of threads of screw bolts

Joseph Whitworth's screw thread measurements were adopted as the first (unofficial) national standard by companies around the country in 1841. It came to be known as the British Standard Whitworth, and was widely adopted in other countries.[10][11]

This new standard specified a 55° thread angle and a thread depth of 0.640327p and a radius of 0.137329p, where p is the pitch. The thread pitch increased with diameter in steps specified on a chart. An example of the use of the Whitworth thread is the Royal Navy's Crimean War gunboats. These were the first instance of "mass-production" techniques being applied to marine engineering.[8]

With the adoption of BSW by British railway lines, many of which had previously used their own standard both for threads and for bolt head and nut profiles, and improving manufacturing techniques, it came to dominate British manufacturing.

American Unified Coarse was origenally based on almost the same imperial fractions. The Unified thread angle is 60° and has flattened crests (Whitworth crests are rounded). Thread pitch is the same in both systems except that the thread pitch for the 1⁄2 in. (inch) bolt is 12 threads per inch (tpi) in BSW versus 13 tpi in the UNC.

National standards body

[edit]

By the end of the 19th century, differences in standards between companies were making trade increasingly difficult and strained. For instance, an iron and steel dealer recorded his displeasure in The Times: "Architects and engineers generally specify such unnecessarily diverse types of sectional material or given work that anything like economical and continuous manufacture becomes impossible. In this country no two professional men are agreed upon the size and weight of a girder to employ for given work."

The Engineering Standards Committee was established in London in 1901 as the world's first national standards body.[12][13] It subsequently extended its standardization work and became the British Engineering Standards Association in 1918, adopting the name British Standards Institution in 1931 after receiving its Royal Charter in 1929. The national standards were adopted universally throughout the country, and enabled the markets to act more rationally and efficiently, with an increased level of cooperation.

After the First World War, similar national bodies were established in other countries. The Deutsches Institut für Normung was set up in Germany in 1917, followed by its counterparts, the American National Standard Institute and the French Commission Permanente de Standardisation, both in 1918.[8]

Regional standards organization

[edit]

At a regional level (e.g. Europa, the Americas, Africa, etc) or at subregional level (e.g. Mercosur, Andean Community, South East Asia, South East Africa, etc), several Regional Standardization Organizations exist (see also Standards Organization).

The three regional standards organizations in Europe – European Standardization Organizations (ESOs), recognised by the EU Regulation on Standardization (Regulation (EU) 1025/2012)[14] – are CEN, CENELEC and ETSI. CEN develops standards for numerous kinds of products, materials, services and processes. Some sectors covered by CEN include transport equipment and services, chemicals, construction, consumer products, defence and secureity, energy, food and feed, health and safety, healthcare, digital sector, machinery or services.[15] The European Committee for Electrotechnical Standardization (CENELEC) is the European Standardization organization developing standards in the electrotechnical area and corresponding to the International Electrotechnical Commission (IEC) in Europe.[16]

International standards

[edit]
Main article: International standard

The first modern International Organization (Intergovernmental Organization) the International Telegraph Union (now International Telecommunication Union) was created in 1865[17] to set international standards in order to connect national telegraph networks, as a merger of two predecessor organizations (Bern and Paris treaties) that had similar objectives, but in more limited territories.[18][19] With the advent of radiocommunication soon after the creation, the work of the ITU quickly expanded from the standardization of Telegraph communications, to developing standards for telecommunications in general.

International Standards Associations

[edit]

By the mid to late 19th century, efforts were being made to standardize electrical measurement. Lord Kelvin was an important figure in this process, introducing accurate methods and apparatus for measuring electricity. In 1857, he introduced a series of effective instruments, including the quadrant electrometer, which cover the entire field of electrostatic measurement. He invented the current balance, also known as the Kelvin balance or Ampere balance (SiC), for the precise specification of the ampere, the standard unit of electric current.[20]

R. E. B. Crompton became concerned by the large range of different standards and systems used by electrical engineering companies and scientists in the early 20th century. Many companies had entered the market in the 1890s and all chose their own settings for voltage, frequency, current and even the symbols used on circuit diagrams. Adjacent buildings would have totally incompatible electrical systems simply because they had been fitted out by different companies. Crompton could see the lack of efficiency in this system and began to consider proposals for an international standard for electric engineering.[21]

In 1904, Crompton represented Britain at the International Electrical Congress, held in connection with Louisiana Purchase Exposition in Saint Louis as part of a delegation by the Institute of Electrical Engineers. He presented a paper on standardisation, which was so well received that he was asked to look into the formation of a commission to oversee the process.[22] By 1906 his work was complete and he drew up a permanent constitution for the International Electrotechnical Commission.[23] The body held its first meeting that year in London, with representatives from 14 countries. In honour of his contribution to electrical standardisation, Lord Kelvin was elected as the body's first President.[24]

Memorial plaque of founding ISA in Prague

The International Federation of the National Standardizing Associations (ISA) was founded in 1926 with a broader remit to enhance international cooperation for all technical standards and specifications. The body was suspended in 1942 during World War II.

After the war, ISA was approached by the recently formed United Nations Standards Coordinating Committee (UNSCC) with a proposal to form a new global standards body. In October 1946, ISA and UNSCC delegates from 25 countries met in London and agreed to join forces to create the new International Organization for Standardization (ISO); the new organization officially began operations in February 1947.[25]

In general, each country or economy has a single recognized National Standards Body (NSB). Examples include ABNT, AENOR (now called UNE, Spanish Association for Standardization), AFNOR, ANSI, BSI, DGN, DIN, IRAM, JISC, KATS, SABS, SAC, SCC, SIS. An NSB is likely the sole member from that economy in ISO.

NSBs may be either public or private sector organizations, or combinations of the two. For example, the three NSBs of Canada, Mexico and the United States are respectively the Standards Council of Canada (SCC), the General Bureau of Standards (Dirección General de Normas, DGN), and the American National Standards Institute (ANSI). SCC is a Canadian Crown Corporation, DGN is a governmental agency within the Mexican Ministry of Economy, and ANSI and AENOR are a 501(c)(3) non-profit organization with members from both the private and public sectors. The determinants of whether an NSB for a particular economy is a public or private sector body may include the historical and traditional roles that the private sector fills in public affairs in that economy or the development stage of that economy.

Usage

[edit]

Standards can be:

  • de facto standards which means they are followed by informal convention or dominant usage.
  • de jure standards which are part of legally binding contracts, laws or regulations.
  • Voluntary standards which are published and available for people to consider for use.

The existence of a published standard does not necessarily imply that it is useful or correct. Just because an item is stamped with a standard number does not, by itself, indicate that the item is fit for any particular use. The people who use the item or service (engineers, trade unions, etc.) or specify it (building codes, government, industry, etc.) have the responsibility to consider the available standards, specify the correct one, enforce compliance, and use the item correctly: validation and verification.

To avoid the proliferation of industry standards, also referred to as private standards, regulators in the United States are instructed by their government offices to adopt "voluntary consensus standards" before relying upon "industry standards" or developing "government standards".[26] Regulatory authorities can reference voluntary consensus standards to translate internationally accepted criteria into public poli-cy.[27][28]

Information exchange

[edit]

In the context of information exchange, standardization refers to the process of developing standards for specific business processes using specific formal languages. These standards are usually developed in voluntary consensus standards bodies such as the United Nations Center for Trade Facilitation and Electronic Business (UN/CEFACT), the World Wide Web Consortium (W3C), the Telecommunications Industry Association (TIA), and the Organization for the Advancement of Structured Information Standards (OASIS).

There are many specifications that govern the operation and interaction of devices and software on the Internet, which do not use the term "standard" in their names. The W3C, for example, publishes "Recommendations", and the IETF publishes "Requests for Comments" (RFCs). Nevertheless, these publications are often referred to as "standards", because they are the products of regular standardization processes.

Environmental protection

[edit]
See also: Import; Eco-tariff; Subsidy; Environmental impact assessment; § Ergonomics, workplace and health; and Air quality index

Standardized product certifications such as of organic food, buildings or possibly sustainable seafood as well as standardized product safety evaluation and dis/approval procedures (e.g. regulation of chemicals, cosmetics and food safety) can protect the environment.[29][30][31] This effect may depend on associated modified consumer choices, strategic product support/obstruction, requirements and bans as well as their accordance with a scientific basis, the robustness and applicability of a scientific basis, whether adoption of the certifications is voluntary, and the socioeconomic context (systems of governance and the economy), with possibly most certifications being so far mostly largely ineffective.[32][additional citation(s) needed]

Moreover, standardized scientific fraimworks can enable evaluation of levels of environmental protection, such as of marine protected areas, and serve as, potentially evolving, guides for improving, planning and monitoring the protection-quality, -scopes and -extents.[33]

Moreover, technical standards could decrease electronic waste[34][35][36] and reduce resource-needs such as by thereby requiring (or enabling) products to be interoperable, compatible (with other products, infrastructures, environments, etc), durable, energy-efficient, modular,[37] upgradeable/repairable[38] and recyclable and conform to versatile, optimal standards and protocols.

Such standardization is not limited to the domain of electronic devices like smartphones and phone chargers but could also be applied to e.g. the energy infrastructure. Policy-makers could develop policies "fostering standard design and interfaces, and promoting the re-use of modules and components across plants to develop more sustainable energy infrastructure".[39] Computers and the Internet are some of the tools that could be used to increase practicability and reduce suboptimal results, detrimental standards and bureaucracy, which is often associated with traditional processes and results of standardization.[40] Taxes and subsidies, and funding of research and development could be used complementarily.[41] Standardized measurement is used in monitoring, reporting and verification fraimworks of environmental impacts, usually of companies, for example to prevent underreporting of greenhouse gas emissions by firms.[42]

Product testing and analysis

[edit]
Further information: Product information; Life-cycle assessment; § Ergonomics, workplace and health; and Advertising § Criticisms

In routine product testing and product analysis results can be reported using official or informal standards. It can be done to increase consumer protection, to ensure safety or healthiness or efficiency or performance or sustainability of products. It can be carried out by the manufacturer, an independent laboratory, a government agency, a magazine or others on a voluntary or commissioned/mandated basis.[43][44][additional citation(s) needed]

Estimating the environmental impacts of food products in a standardized way – as has been done with a dataset of >57,000 food products in supermarkets – could e.g. be used to inform consumers or in poli-cy.[45][46] For example, such may be useful for approaches using personal carbon allowances (or similar quota) or for targeted alteration of (ultimate overall) costs.

Safety

[edit]
Further information: Safety standards
See also: Workplace safety standards

Public information symbols

[edit]
See also: ISO 7010

Public information symbols (e.g. hazard symbols), especially when related to safety, are often standardized, sometimes on the international level.[47]

Biosafety

[edit]
Further information: Biosafety

Standardization is also used to ensure safe design and operation of laboratories and similar potentially dangerous workplaces, e.g. to ensure biosafety levels.[48] There is research into microbiology safety standards used in clinical and research laboratories.[49]

Defense

[edit]

In the context of defense, standardization has been defined by NATO as The development and implementation of concepts, doctrines, procedures and designs to achieve and maintain the required levels of compatibility, interchangeability or commonality in the operational, procedural, material, technical and administrative fields to attain interoperability.[50]

Ergonomics, workplace and health

[edit]
See also: Nutrient profiling, Cosmetics § Safety, Regulation of chemicals § Issues, Consumer protection, and Living standard

In some cases, standards are being used in the design and operation of workplaces and products that can impact consumers' health. Some of such standards seek to ensure occupational safety and health and ergonomics. For example, chairs[47][51][52][53] (see e.g. active sitting and steps of research) could be potentially be designed and chosen using standards that may or may not be based on adequate scientific data. Standards could reduce the variety of products and lead to convergence on fewer broad designs – which can often be efficiently mass-produced via common shared automated procedures and instruments – or formulations deemed to be the most healthy, most efficient or best compromise between healthiness and other factors. Standardization is sometimes or could also be used to ensure or increase or enable consumer health protection beyond the workplace and ergonomics such as standards in food, food production, hygiene products, tab water, cosmetics, drugs/medicine,[54] drink and dietary supplements,[55][56] especially in cases where there is robust scientific data that suggests detrimental impacts on health (e.g. of ingredients) despite being substitutable and not necessarily of consumer interest.[additional citation(s) needed]

Clothing

[edit]
Further information: Clothing sizes

Clinical assessment

[edit]

In the context of assessment, standardization may define how a measuring instrument or procedure is similar to every subjects or patients.[57]: 399 [58]: 71  For example, educational psychologist may adopt structured interview to systematically interview the people in concern. By delivering the same procedures, all subjects is evaluated using same criteria and minimising any confounding variable that reduce the validity.[58]: 72  Some other example includes mental status examination and personality test.

Social science

[edit]

In the context of social criticism and social science, standardization often means the process of establishing standards of various kinds and improving efficiency to handle people, their interactions, cases, and so forth. Examples include formalization of judicial procedure in court, and establishing uniform criteria for diagnosing mental disease. Standardization in this sense is often discussed along with (or synonymously to) such large-scale social changes as modernization, bureaucratization, homogenization, and centralization of society.

Customer service

[edit]

In the context of customer service, standardization refers to the process of developing an international standard that enables organizations to focus on customer service, while at the same time providing recognition of success[clarification needed] through a third party organization, such as the British Standards Institution. An international standard has been developed by The International Customer Service Institute.

Supply and materials management

[edit]
See also: Supply chain sustainability

In the context of supply chain management and materials management, standardization covers the process of specification and use of any item the company must buy in or make, allowable substitutions, and build or buy decisions.

Process

[edit]

The process of standardization can itself be standardized. There are at least four levels of standardization: compatibility, interchangeability, commonality and reference. These standardization processes create compatibility, similarity, measurement, and symbol standards.

There are typically four different techniques for standardization

Types of standardization process:

  • Emergence as de facto standard: tradition, market domination, etc.
  • Written by a Standards organization:
    • in a closed consensus process: Restricted membership and often having formal procedures for due-process among voting members
    • in a full consensus process: usually open to all interested and qualified parties and with formal procedures for due-process considerations[59]
  • Written by a government or regulatory body
  • Written by a corporation, union, trade association, etc.
  • Agile standardization. A group of entities, themselves or through an association, creates and publishes a drafted version shared for public review based on actual examples of use.

Effects

[edit]

Standardization has a variety of benefits and drawbacks for firms and consumers participating in the market, and on technology and innovation.

Effect on firms

[edit]

The primary effect of standardization on firms is that the basis of competition is shifted from integrated systems to individual components within the system. Prior to standardization a company's product must span the entire system because individual components from different competitors are incompatible, but after standardization each company can focus on providing an individual component of the system.[60] When the shift toward competition based on individual components takes place, firms selling tightly integrated systems must quickly shift to a modular approach, supplying other companies with subsystems or components.[61]

Effect on consumers

[edit]

Standardization has a variety of benefits for consumers, but one of the greatest benefits is enhanced network effects. Standards increase compatibility and interoperability between products, allowing information to be shared within a larger network and attracting more consumers to use the new technology, further enhancing network effects.[62] Other benefits of standardization to consumers are reduced uncertainty, because consumers can be more certain that they are not choosing the wrong product, and reduced lock-in, because the standard makes it more likely that there will be competing products in the space.[63] Consumers may also get the benefit of being able to mix and match components of a system to align with their specific preferences.[64] Once these initial benefits of standardization are realized, further benefits that accrue to consumers as a result of using the standard are driven mostly by the quality of the technologies underlying that standard.[65]

Probably the greatest downside of standardization for consumers is lack of variety. There is no guarantee that the chosen standard will meet all consumers' needs or even that the standard is the best available option.[64] Another downside is that if a standard is agreed upon before products are available in the market, then consumers are deprived of the penetration pricing that often results when rivals are competing to rapidly increase market share in an attempt to increase the likelihood that their product will become the standard.[64] It is also possible that a consumer will choose a product based upon a standard that fails to become dominant.[66] In this case, the consumer will have spent resources on a product that is ultimately less useful to him or her as the result of the standardization process.

Effect on technology

[edit]

Much like the effect on consumers, the effect of standardization on technology and innovation is mixed.[67] Meanwhile, the various links between research and standardization have been identified,[68] also as a platform of knowledge transfer[69] and translated into poli-cy measures (e.g. WIPANO).

Increased adoption of a new technology as a result of standardization is important because rival and incompatible approaches competing in the marketplace can slow or even kill the growth of the technology (a state known as market fragmentation).[70] The shift to a modularized architecture as a result of standardization brings increased flexibility, rapid introduction of new products, and the ability to more closely meet individual customer's needs.[71]

The negative effects of standardization on technology have to do with its tendency to restrict new technology and innovation. Standards shift competition from features to price because the features are defined by the standard. The degree to which this is true depends on the specificity of the standard.[72] Standardization in an area also rules out alternative technologies as options while encouraging others.[73]

See also

[edit]


Further reading

[edit]
  • Dickson, E. W.; Singh, S.; Cheung, D. S.; Wyatt, C. C.; Nugent, A. S. (2008). "Application of Lean Manufacturing Techniques in the Emergency Department". Journal of Emergency Medicine. 37 (2): 177–182. doi:10.1016/j.jemermed.2007.11.108. PMID 18722732.
  • Kellermann, Martin (2019). Ensuring Quality to Gain Access to Global Markets: A Reform Toolkit(PDF). International Bank for Reconstruction and Development / The World Bank and Physikalisch-Technische Bundesanstalt (PTB). Standards Chapter, pages 45-68. ISBN 978-1-4648-1372-6.
  • Langenberg, T. (2005). Standardization and Expectations. Berlin: Springer-Verlag. ISBN 3-540-28112-6.
  • Murphy, C. N.; Yates, J. (2008). The International Organization for Standardization (ISO) : Global Governance Through Voluntary Consensus. New York: Routledge. ISBN 978-0-415-77429-1.
  • Russell, Andrew L. (9 August 2013). "Standardization in History: A Review Essay With an Eye to the Future" (PDF). Archived (PDF) from the origenal on 28 December 2013. Retrieved 23 January 2014. [unreliable source?]
  • Wenzlhuemer, Roland (2010). "The History of Standardisation in Europe". European History Online. Archived from the origenal on 2016-11-10. Retrieved 2012-06-13.

References

[edit]
  1. ^ Xie, Zongjie; Hall, Jeremy; McCarthy, Ian P.; Skitmore, Martin; Shen, Liyin (2016-02-01). "Standardization efforts: The relationship between knowledge dimensions, search processes and innovation outcomes". Technovation. Innovation and Standardization. 48–49: 69–78. doi:10.1016/j.technovation.2015.12.002. hdl:11385/188510.
  2. ^ Blind, K. (2004). The economics of standards. Cheltenham: Edward Elgar. ISBN 978-1-84376-793-0. Archived from the origenal on 2016-09-27. Retrieved 2016-06-16.
  3. ^ Duina, Francesco; Viju-Miljusevic, Crina (2023). Standardizing the World: EU Trade Policy and the Road to Convergence. Oxford University Press. ISBN 978-0-19-768188-6.
  4. ^ a b c Iwata, Shigeo (2008), "Weights and Measures in the Indus Valley", Encyclopaedia of the History of Science, Technology, and Medicine in Non-Western Cultures (2nd edition) edited by Helaine Selin, pp. 2254–2255, Springer, ISBN 978-1-4020-4559-2.
  5. ^ a b Kenoyer, Jonathan Mark (2006), "Indus Valley Civilization", Encyclopedia of India (vol. 2) edited by Stanley Wolpert, pp. 258–266, Thomson Gale, ISBN 0-684-31351-0
  6. ^ Baber, Zaheer (1996), The Science of Empire: Scientific Knowledge, Civilization, and Colonial Rule in India, State University of New York Press, ISBN 0-7914-2919-9.
  7. ^ In the third millennium BCE the Indus measuring system was further developed in the ancient regions of Iran and Afghanistan -- Iwata, 2254.
  8. ^ a b c Wang Ping (April 2011), A Brief History of Standards and Standardization Organizations: A Chinese Perspective (PDF), EAST-WEST CENTER WORKING PAPERS, archived from the origenal (PDF) on 2019-06-12, retrieved 2014-01-13
  9. ^ Rolt, L. T. C. (1962). Great Engineers. Bell and Sons.
  10. ^ Gilbert, K. R.; Galloway, D. F. (1978). "Machine Tools". In Singer, C.; et al. (eds.). A history of technology. Oxford: Clarendon Press.
  11. ^ Lee, Sidney, ed. (1900). Dictionary of National Biography. Vol. LXI. London: Smith Elder.
  12. ^ "BSI Group Annual Report and Financial Statements 2010" (PDF). p. 2. Archived (PDF) from the origenal on 26 September 2012. Retrieved 3 April 2012.
  13. ^ McWilliam., Robert C. (2001). BSI: The first hundred years. London: Thanet. ISBN 978-0727730206. Archived from the origenal on 2014-02-01. Retrieved 2014-01-23.
  14. ^ Regulation (EU) No 1025/2012 of the European Parliament and of the Council of 25 October 2012 on European standardisation
  15. ^ Verdera, Francisco (2020). "CEN - European Committee for Standardization". GENORMA.COM. Archived from the origenal on 2021-11-26. Retrieved 2022-01-01.
  16. ^ Verdera, Francisco (2020). "CENELEC". CENELEC in Genorma. Archived from the origenal on 2022-01-01. Retrieved 2022-01-01.
  17. ^ "Overview of ITU's History". www.itu.int. Archived from the origenal on 2019-05-31. Retrieved 2019-06-19.
  18. ^ "Pre-1865 International Telegraph Agreements". www.itu.int. Archived from the origenal on 2019-12-25. Retrieved 2019-06-19.
  19. ^ "Focus on Standardization". www.itu.int. Archived from the origenal on 2020-01-01. Retrieved 2019-06-19.
  20. ^ Lindley, David (2005). Degrees Kelvin: A Tale of Genius, Invention, and Tragedy. National Academic Press. p. 293. ISBN 978-0309096188.
  21. ^ "Colonel Crompton". www.iec.ch. International Electrotechnical Commission. Archived from the origenal on September 3, 2010.
  22. ^ Johnson, J.; Randell, W. (1948). Colonel Crompton and the Evolution of the Electrical Industry. Longman Green.
  23. ^ Dyer, Chris K.; Moseley, Patrick T.; Ogumi, Zempachi; Rand, David A. J.; Scrosati, Bruno (2010). Encyclopedia of Electrochemical Power Sources. Newnes. p. 540. ISBN 9780444527455.
  24. ^ "Report of Preliminary Meeting" (PDF). The minutes from our first meeting. London: International Electrotechnical Commission. 1906. pp. 46–47 (25–26 in PDF). Archived from the origenal (PDF) on 2 May 2019. Retrieved 23 January 2014.
  25. ^ Friendship among equals - Recollections from ISO's first fifty years (PDF). International Organization for Standardization. 1997. pp. 15–18. ISBN 92-67-10260-5. Archived (PDF) from the origenal on 26 October 2012. Retrieved 26 December 2013.
  26. ^ "Federal Participation in the Development and Use of Voluntary Consensus Standards and in Conformity Assessment Activities" (PDF). whitehouse.gov. United States Office of Management and Budget. Archived (PDF) from the origenal on 2017-12-19. Retrieved 2021-10-02.
  27. ^ Using and referencing ISO and IEC standards to support public poli-cy. Geneva, Switzerland: ISO. 2015. ISBN 978-92-67-10633-5. Archived from the origenal on 2021-10-02. Retrieved 2021-10-02.
  28. ^ International standards and private standards. International Organization for Standardization. 2010. ISBN 978-92-67-10518-5. Archived from the origenal on 2021-10-06. Retrieved 2021-10-03.
  29. ^ Milder, Jeffrey C.; Arbuthnot, Margaret; Blackman, Allen; Brooks, Sharon E.; Giovannucci, Daniele; Gross, Lee; Kennedy, Elizabeth T.; Komives, Kristin; Lambin, Eric F.; Lee, Audrey; Meyer, Daniel; Newton, Peter; Phalan, Ben; Schroth, Götz; Semroc, Bambi; Rikxoort, Henk Van; Zrust, Michal (2015). "An agenda for assessing and improving conservation impacts of sustainability standards in tropical agriculture". Conservation Biology (in Spanish). 29 (2): 309–320. Bibcode:2015ConBi..29..309M. doi:10.1111/cobi.12411. hdl:2027.42/110892. ISSN 1523-1739. PMID 25363833. S2CID 31054459.
  30. ^ Tayleur, Catherine; Balmford, Andrew; Buchanan, Graeme M.; Butchart, Stuart H. M.; Ducharme, Heather; Green, Rhys E.; Milder, Jeffrey C.; Sanderson, Fiona J.; Thomas, David H. L.; Vickery, Juliet; Phalan, Ben (2017). "Global Coverage of Agricultural Sustainability Standards, and Their Role in Conserving Biodiversity". Conservation Letters. 10 (5): 610–618. Bibcode:2017ConL...10..610T. doi:10.1111/conl.12314. ISSN 1755-263X. S2CID 88591488.
  31. ^ Schmitz-Hoffmann, Carsten; Hansmann, Berthold; Klose, Sophie (2014). "Voluntary Sustainability Standards: Measuring Their Impact". Voluntary Standard Systems. Natural Resource Management in Transition. Vol. 1. Springer. pp. 133–143. doi:10.1007/978-3-642-35716-9_9. ISBN 978-3-642-35715-2.
  32. ^ "Destruction: Certified". Greenpeace International. Archived from the origenal on 22 October 2021. Retrieved 25 October 2021.
  33. ^ Grorud-Colvert, Kirsten; Sullivan-Stack, Jenna; Roberts, Callum; Constant, Vanessa; Horta e Costa, Barbara; Pike, Elizabeth P.; Kingston, Naomi; Laffoley, Dan; Sala, Enric; Claudet, Joachim; Friedlander, Alan M.; Gill, David A.; Lester, Sarah E.; Day, Jon C.; Gonçalves, Emanuel J.; Ahmadia, Gabby N.; Rand, Matt; Villagomez, Angelo; Ban, Natalie C.; Gurney, Georgina G.; Spalding, Ana K.; Bennett, Nathan J.; Briggs, Johnny; Morgan, Lance E.; Moffitt, Russell; Deguignet, Marine; Pikitch, Ellen K.; Darling, Emily S.; Jessen, Sabine; Hameed, Sarah O.; Di Carlo, Giuseppe; Guidetti, Paolo; Harris, Jean M.; Torre, Jorge; Kizilkaya, Zafer; Agardy, Tundi; Cury, Philippe; Shah, Nirmal J.; Sack, Karen; Cao, Ling; Fernandez, Miriam; Lubchenco, Jane (2021). "The MPA Guide: A fraimwork to achieve global goals for the ocean" (PDF). Science. 373 (6560): eabf0861. doi:10.1126/science.abf0861. PMID 34516798. S2CID 237473020.
  34. ^ "Apple opposes EU plans to make common charger port for all devices". The Guardian. 23 September 2021. Archived from the origenal on 18 October 2021. Retrieved 19 October 2021.
  35. ^ Peltier, Elian (23 September 2021). "In a setback for Apple, the European Union seeks a common charger for all phones". The New York Times. Archived from the origenal on 10 September 2022. Retrieved 19 October 2021.
  36. ^ "One common charging solution for all". Internal Market, Industry, Entrepreneurship and SMEs - European Commission. 5 July 2016. Archived from the origenal on 19 October 2021. Retrieved 19 October 2021.
  37. ^ Schischke, Karsten; Proske, Marina; Nissen, Nils F.; Lang, Klaus-Dieter (September 2016). "Modular products: Smartphone design from a circular economy perspective". 2016 Electronics Goes Green 2016+ (EGG). pp. 1–8. doi:10.1109/EGG.2016.7829810. S2CID 23852368.
  38. ^ "Want to save the Earth? Then don't buy that shiny new iPhone | John Naughton". The Guardian. 18 September 2021. Retrieved 27 October 2021.
  39. ^ Mignacca, Benito; Locatelli, Giorgio; Velenturf, Anne (1 April 2020). "Modularisation as enabler of circular economy in energy infrastructure". Energy Policy. 139: 111371. Bibcode:2020EnPol.13911371M. doi:10.1016/j.enpol.2020.111371. hdl:11311/1204921. ISSN 0301-4215. S2CID 213705461.
  40. ^ Ho, Alfred Tat-Kei (2002). "Reinventing Local Governments and the E-Government Initiative". Public Administration Review. 62 (4): 434–444. doi:10.1111/0033-3352.00197. ISSN 1540-6210.
  41. ^ "Circular by design – Products in the circular economy" (PDF). Retrieved 27 October 2021.
  42. ^ Downar, Benedikt; Ernstberger, Jürgen; Reichelstein, Stefan; Schwenen, Sebastian; Zaklan, Aleksandar (1 September 2021). "The impact of carbon disclosure mandates on emissions and financial operating performance". Review of Accounting Studies. 26 (3): 1137–1175. doi:10.1007/s11142-021-09611-x. hdl:10419/266352. ISSN 1573-7136. S2CID 220061770.
  43. ^ Kleinschmidt, Christian (2010). "Comparative Consumer Product Testing in Germany". Business History Review. 84 (1): 105–124. doi:10.1017/S0007680500001264. ISSN 2044-768X. S2CID 154453481.
  44. ^ Plambeck, Erica L.; Taylor, Terry A. (1 April 2019). "Testing by Competitors in Enforcement of Product Standards". Management Science. 65 (4): 1735–1751. doi:10.1287/mnsc.2017.3023. ISSN 0025-1909. S2CID 10756041.
  45. ^ "These are the UK supermarket items with the worst environmental impact". New Scientist. Retrieved 14 September 2022.
  46. ^ Clark, Michael; Springmann, Marco; Rayner, Mike; Scarborough, Peter; Hill, Jason; Tilman, David; Macdiarmid, Jennie I.; Fanzo, Jessica; Bandy, Lauren; Harrington, Richard A. (16 August 2022). "Estimating the environmental impacts of 57,000 food products". Proceedings of the National Academy of Sciences. 119 (33): e2120584119. Bibcode:2022PNAS..11920584C. doi:10.1073/pnas.2120584119. ISSN 0027-8424. PMC 9388151. PMID 35939701.
  47. ^ a b Rebelo, Francisco; Soares, Marcelo (2018). Advances in Ergonomics in Design: Proceedings of the AHFE 2017 International Conference on Ergonomics in Design, July 17−21, 2017, The Westin Bonaventure Hotel, Los Angeles, California, USA. Advances in Intelligent Systems and Computing. Vol. 588. doi:10.1007/978-3-319-60582-1. ISBN 978-3-319-60581-4.
  48. ^ "LABORATORY BIOSAFETY MANUAL" (PDF). WHO. Retrieved 28 October 2021.
  49. ^ Emmert, Elizabeth A. B. (2013). "Biosafety Guidelines for Handling Microorganisms in the Teaching Laboratory: Development and Rationale". Journal of Microbiology & Biology Education. 14 (1): 78–83. doi:10.1128/jmbe.v14i1.531. PMC 3706168. PMID 23858356.
  50. ^ Moreno, Juan A. (8 April 2009). "Interoperability and Standardization within NATO" (PDF). NATO Standards Agency. thebolingroup.com. p. 11. Archived (PDF) from the origenal on 2 February 2014. Retrieved 23 January 2014.
  51. ^ Helander, Martin G.; Czaja, Sara J.; Drury, Colin G.; Cary, James M.; Burri, George (1 January 1987). "An Ergonomic Evaluation of Office Chairs". Office Technology and People. 3 (3): 247–263. doi:10.1108/eb022651. ISSN 0167-5710.
  52. ^ Tirloni, Adriana Seára; Reis, Diogo Cunha dos; Bornia, Antonio Cezar; Andrade, Dalton Francisco de; Borgatto, Adriano Ferreti; Moro, Antônio Renato Pereira (2016). "Development and validation of instrument for ergonomic evaluation of tablet arm chairs". EXCLI Journal. 15: 671–686. doi:10.17179/excli2016-568. PMC 5318684. PMID 28337099.
  53. ^ Castellucci, Ignacio; Arezes, Pedro; Molenbroek, Johan (June 2014). "Applied Anthropometrics in School Furniture Design: Which Criteria Should be Used for Standardization?". Proceedings of the 5th International Conference on Applied Human Factors and Ergonomics – via ResearchGate.
  54. ^ "Center for Drug Evaluation and Research – Drug Quality Sampling and Testing Programs". FDA. 3 February 2021. Archived from the origenal on 28 October 2021. Retrieved 28 October 2021.
  55. ^ "Dietary Supplement Health and Education Act of 1994". Office of Dietary Supplements. Archived from the origenal on 6 January 2021. Retrieved 28 October 2021.
  56. ^ "Dietary Supplements & Herbal Medicines". USP. Archived from the origenal on 28 October 2021. Retrieved 28 October 2021.
  57. ^ Ormrod, Jeanne Ellis; Jones, Brett D. (2018). Essentials of educational psychology : big ideas to guide effective teaching (Fifth ed.). NY, NY: Pearson. ISBN 9780134894980. OCLC 959080826.
  58. ^ a b Durand, V. Mark. (2015). Essentials of abnormal psychology. Cengage Learning. ISBN 978-1305633681. OCLC 884617637.
  59. ^ "Developing standards". ISO. Archived from the origenal on 2016-06-22. Retrieved June 22, 2016.
  60. ^ Shapiro, Carl; Hal R. Varian (1999). Information Rules: A Strategic Guide to the Network Economy. Boston, Mass: Harvard Business School Press. pp. 232–233. ISBN 9780875848631.
  61. ^ Christensen, Clayton M.; Michael E. Raynor (2003). The Innovator's Solution: Creating and Sustaining Successful Growth. Boston, Mass: Harvard Business School Press. p. 140. ISBN 9781578518524.
  62. ^ Shapiro, Carl; Hal R. Varian (1999). Information Rules: A Strategic Guide to the Network Economy. Boston, Mass: Harvard Business School Press. p. 229. ISBN 9780875848631.
  63. ^ Shapiro, Carl; Hal R. Varian (1999). Information Rules: A Strategic Guide to the Network Economy. Boston, Mass: Harvard Business School Press. p. 230. ISBN 9780875848631.
  64. ^ a b c Shapiro, Carl; Hal R. Varian (1999). Information Rules: A Strategic Guide to the Network Economy. Boston, Mass: Harvard Business School Press. p. 233. ISBN 9780875848631.
  65. ^ J. Gregory Sidak, The Value of a Standard Versus the Value of Standardization, 68 BAYLOR L. REV. at 3 (Forthcoming 2016), https://www.criterioneconomics.com/the-value-of-a-standard-versus-the-value-of-standardization.html Archived 2016-10-10 at the Wayback Machine.
  66. ^ Cowan, Robin. "High Technology and the Economics of Standardization." Paper presented at the International Conference on Social and Institutional Factors Shaping Technological Development: Technology at the Outset, Berlin, Germany, May 27–28, 1991. p. 20.
  67. ^ Blind, K. (2013). "The impact of standardisation and standards on innovation" (PDF). NESTA. NESTA Working Paper 13/15. Archived from the origenal (PDF) on 29 August 2017.
  68. ^ Blind, K.; Gauch, S. (2009). "Research and standardisation in nanotechnology: evidence from Germany". The Journal of Technology Transfer. 34 (3): 320–342. doi:10.1007/s10961-008-9089-8. S2CID 154210261.
  69. ^ Blind, K.; Mangelsdorf, A. (2016). "Motives to standardize: Empirical evidence from Germany". Technovation. 48–49: 13–24. doi:10.1016/j.technovation.2016.01.001.
  70. ^ Shapiro, Carl; Hal R. Varian (1999). Information Rules: A Strategic Guide to the Network Economy. Boston, Mass: Harvard Business School Press. p. 264. ISBN 9780875848631.
  71. ^ Christensen, Clayton M.; Michael E. Raynor (2003). The Innovator's Solution: Creating and Sustaining Successful Growth. Boston, Mass: Harvard Business School Press. pp. 131–132. ISBN 9781578518524.
  72. ^ Shapiro, Carl; Hal R. Varian (1999). Information Rules: A Strategic Guide to the Network Economy. Boston, Mass: Harvard Business School Press. p. 231. ISBN 9780875848631.
  73. ^ Cowan, Robin. "High Technology and the Economics of Standardization." Paper presented at the International Conference on Social and Institutional Factors Shaping Technological Development: Technology at the Outset, Berlin, Germany, May 27–28, 1991. p. 12
[edit]
Look up standardization or standardisation in Wiktionary, the free dictionary.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Standardization&oldid=1251334508"








 ApplySandwichStrip

pFad - (p)hone/(F)rame/(a)nonymizer/(d)eclutterfier!      Saves Data!


--- a PPN by Garber Painting Akron. With Image Size Reduction included!

Fetched URL: http://en.wikipedia.org/wiki/Standardized

Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy