Arduino library to transfer dynamic, packetized data fast and reliably via Serial, I2C, etc.

A Wiki about common mistakes when using the Arduino Wire library.

Firmware for a trailing/leading edge MOSFET/BJT/TRIAC dimmer written in C++ including schematics/PCB-layouts

Example code showing different communications such as TTL, SPI and I2C.

Qt implementation of I2C protocol for RaspberryPi along with some i2c sensors, in particular: TOF10120, VL53l1X, VL6180X, MPU6050, QMC5883L, TCA9548A, PCA9685

I2C Bare metal drivers for stm32 f4 family of microcontrollers written in C from scratch .The driver contain apis for the user to send and receive data i2c communication . The driver has two flavor of apis polling based (blocking ) and Interrupt based (non blocking ) check examples in the Src folder for more reference .

I2C IOServer implements i2c protocol support in CDP for Linux

Entering commands in a web-console to control an I2C slave using an Arduino based WebUSB bridge

This library is useful for FAST communicating with i2C or SMBus or PMBus devices using FTDI adapters. Typical message to message transmission delay is less than 1 millisecond.

Simple I2C bus sniffer based on ATtiny2313A MCU

Arduino library that implements "bus clear" for an I2C bus

Verification i2c communication protocol

Arduino PID controller for EV3 using I2C protocol.

Verilog implementation of I2C

Bus and Device classes for i2c-bus, with promised functions.

This repository is made for the NXP PCA9634 IC. It's an usefull chip for interfacing with multiple LED's. That's why I created this library to take full advantage of the chip's capabilities!

A mini-game system implemented in C for a Basys Board 🕹 🔌 (2018)

I2C communication between two Arduino Uno

This repo contains arduino code for 3WD robotic base. I have used 1 main controller(master) and 3 slave controllers. The master provides desired rpm value to slave via I2C communication and the slave drives the robot seamlessly. I have used PID control for better stabilization. Work with IMU is on the way!!!

Basic 2in1 game hardware with Tiva C, an LCD and 2 servos.