Computers & Chemical Engineering, Volume 34

Volume 34, Number 1, January 2010

• 
  Asghar Alizadehdakhel, Masoud Rahimi, Ammar Abdulaziz Alsairafi:
  CFD and experimental studies on the effect of valve weight on performance of a valve tray column. 1-8
• 
  Deepak Kumar, Vivek Kumar, V. P. Singh:
  Mathematical modeling of brown stock washing problems and their numerical solution using MATLAB. 9-16
• 
  P. A. Rolandi, José A. Romagnoli:
  Integrated model-centric framework for support of manufacturing operations. Part I: The framework. 17-35
• 
  Quan Yuan, Feng Qian:
  A hybrid genetic algorithm for twice continuously differentiable NLP problems. 36-41
• 
  Gonzalo Guillén-Gosálbez, Ignacio E. Grossmann:
  A global optimization strategy for the environmentally conscious design of chemical supply chains under uncertainty in the damage assessment model. 42-58
• 
  Thomas Pattinson, Thokozani Majozi:
  Introducing a new operational policy: The PIS operational policy. 59-72
• 
  Arun Giridhar, Rakesh Agrawal:
  Synthesis of distillation configurations: I. Characteristics of a good search space. 73-83
• 
  Arun Giridhar, Rakesh Agrawal:
  Synthesis of distillation configurations. II: A search formulation for basic configurations. 84-95
• 
  A. K. M. M. Murshed, Biao Huang, K. Nandakumar:
  Estimation and control of solid oxide fuel cell system. 96-111
• 
  Jeffrey D. Ward, Cheng-Ching Yu, Michael F. Doherty:
  Plantwide dynamics and control of processes with crystallization. 112-121
• 
  Richart Vázquez-Román, Jin-Han Lee, Seungho Jung, M. Sam Mannan:
  Optimal facility layout under toxic release in process facilities: A stochastic approach. 122-133

Volume 34, Number 2, February 2010

• 
  Ankan Kumar, Sandip Mazumder:
  Toward simulation of full-scale monolithic catalytic converters with complex heterogeneous chemistry. 135-145
• 
  Xueliang Li, Ryan Shaw, Geoffrey M. Evans, Paul Stevenson:
  A simple numerical solution to the Ward-Tordai equation for the adsorption of non-ionic surfactants. 146-153
• 
  Zhengjiang Zhang, Zhijiang Shao, Xi Chen, Kexin Wang, Jixin Qian:
  Quasi-weighted least squares estimator for data reconciliation. 154-162
• 
  Steinar M. Elgsæter, Olav Slupphaug, Tor Arne Johansen:
  A structured approach to optimizing offshore oil and gas production with uncertain models. 163-176
• 
  José María Ponce-Ortega, Medardo Serna-González, Arturo Jiménez-Gutiérrez:
  Optimization model for re-circulating cooling water systems. 177-195
• 
  J. Carlos Cárdenas-Guerra, Teresa López-Arenas, Ricardo Lobo-Oehmichen, Eduardo S. Pérez-Cisneros:
  A reactive distillation process for deep hydrodesulfurization of diesel: Multiplicity and operation aspects. 196-209
• 
  Adam C. Baughman, Xinqun Huang, Susan T. Sharfstein, Lealon L. Martin:
  On the dynamic modeling of mammalian cell metabolism and mAb production. 210-222
• 
  Mauricio Maestri, Andrés Farall, Pablo Groisman, Miryan Cassanello, Gabriel Horowitz:
  A robust clustering method for detection of abnormal situations in a process with multiple steady-state operation modes. 223-231
• 
  Salem Zerkaoui, Fabrice Druaux, Edouard Leclercq, Dimitri Lefebvre:
  Indirect neural control for plant-wide systems: Application to the Tennessee Eastman Challenge Process. 232-243
• 
  Netta Liin Rossing, Morten Lind, Niels Jensen, Sten Bay Jørgensen:
  A functional HAZOP methodology. 244-253
• 
  Matt Bassett, L. Leslie Gardner:
  Optimizing the design of global supply chains at Dow AgroSciences. 254-265

Volume 34, Number 3, March 2010

• 
  René Bañares-Alcántara:
  Perspectives on the potential roles of engineers in the formulation, implementation and enforcement of policies. 267-276
• 
  Hong Gao, Bingchang Lin:
  A simplified numerical method for the General Rate model. 277-285
• 
  Luiz Fernando L. R. Silva, R. C. Rodrigues, J. F. Mitre, Paulo L. C. Lage:
  Comparison of the accuracy and performance of quadrature-based methods for population balance problems with simultaneous breakage and aggregation. 286-297
• 
  Victor R. Vásquez, Wallace B. Whiting, Mark M. Meerschaert:
  Confidence interval estimation under the presence of non-Gaussian random errors: Applications to uncertainty analysis of chemical processes and simulation. 298-305
• 
  Florinda Martins, Carlos A. V. Costa:
  Economic, environmental and mixed objective functions in non-linear process optimization using simulated annealing and tabu search. 306-317
• 
  José María Ponce-Ortega, Mahmoud M. El-Halwagi, Arturo Jiménez-Gutiérrez:
  Global optimization for the synthesis of property-based recycle and reuse networks including environmental constraints. 318-330
• 
  F. Emun, Mamdouh Gadalla, Thokozani Majozi, Dieter Boer:
  Integrated gasification combined cycle (IGCC) process simulation and optimization. 331-338
• 
  Ákos Kriston, György Inzelt, István Faragó, Tamás Szabó:
  Simulation of the transient behavior of fuel cells by using operator splitting techniques for real-time applications. 339-348
• 
  A. J. Willis:
  Condition monitoring of centrifuge vibrations using kernel PLS. 349-353
• 
  Éric Poulin, Daniel Hodouin, Luc Lachance:
  Impact of plant dynamics on the performance of steady-state data reconciliation. 354-360
• 
  San-Jang Wang, Cheng-Ching Yu, Hsiao-Ping Huang:
  Plant-wide design and control of DMC synthesis process via reactive distillation and thermally coupled extractive distillation. 361-373
• 
  Xiwei Liu, Masaru Noda, Hirokazu Nishitani:
  Evaluation of plant alarm systems by behavior simulation using a virtual subject. 374-386
• 
  George Liberopoulos, George Kozanidis, Olympia Hatzikonstantinou:
  Production scheduling of a multi-grade PET resin plant. 387-400
• 
  Alberto Herrán, Jesús Manuel de la Cruz, B. de Andrés:
  A mathematical model for planning transportation of multiple petroleum products in a multi-pipeline system. 401-413
• 
  Jon Bon, Gabriela Clemente, H. A. Vaquiro, Antonio Mulet:
  Simulation and optimization of milk pasteurization processes using a general process simulator (ProSimPlus). 414-420

Volume 34, Number 4, April 2010

• 
  Haresh Patel, Farhad Ein-Mozaffari, Ramdhane Dhib:
  CFD analysis of mixing in thermal polymerization of styrene. 421-429
• 
  J. S. Jayakumar, S. M. Mahajani, J. C. Mandal, Kannan N. Iyer, P. K. Vijayan:
  CFD analysis of single-phase flows inside helically coiled tubes. 430-446
• 
  Martin Ballerstein, Dennis Michaels, Andreas Seidel-Morgenstern, Robert Weismantel:
  A theoretical study of continuous counter-current chromatography for adsorption isotherms with inflection points. 447-459
• 
  Naveed Ramzan, Muhammad Faheem, Rafiqul Gani, Werner Witt:
  Multiple steady states detection in a packed-bed reactive distillation column using bifurcation analysis. 460-466
• 
  Jonathan J. Stickel:
  Data smoothing and numerical differentiation by a regularization method. 467-475
• 
  Hara Mohan Jena, G. K. Roy, S. S. Mahapatra:
  Determination of optimum gas holdup conditions in a three-phase fluidized bed by genetic algorithm. 476-484
• 
  Soo-Jin Park, Sphurti Bhargava, George G. Chase:
  Fitting of kinetic parameters of NO reduction by CO in fibrous media using a genetic algorithm. 485-490
• 
  Sergio Alejandro Martínez-Delgadillo, Helvio R. Mollinedo P., Marco Antonio Gutiérrez, Icela D. Barceló, Juan Manuel Méndez:
  Performance of a tubular electrochemical reactor, operated with different inlets, to remove Cr(VI) from wastewater. 491-499
• 
  Tao Chen, Jie Zhang:
  On-line multivariate statistical monitoring of batch processes using Gaussian mixture model. 500-507
• 
  Wangyun Won, Kwang Soon Lee, Seokho Lee, Chansul Jung:
  Repetitive control and online optimization of Catofin propane process. 508-517
• 
  Bo Liu, Ling Wang, Ying Liu, Bin Qian, Yihui Jin:
  An effective hybrid particle swarm optimization for batch scheduling of polypropylene processes. 518-528
• 
  Naiqi Wu, Feng Chu, Chengbin Chu, MengChu Zhou:
  Tank cycling and scheduling analysis of high fusion point oil transportation for crude oil operations in refinery. 529-543
• 
  Chaowei Liu, Jian Zhang, Qiang Xu, Kuyen Li:
  Cyclic scheduling for best profitability of industrial cracking furnace system. 544-554
• 
  Oscar Baez Senties, Catherine Azzaro-Pantel, Luc Pibouleau, Serge Domenech:
  Multiobjective scheduling for semiconductor manufacturing plants. 555-566
• 
  Yu Yang, Jong Min Lee:
  Probabilistic modeling and dynamic optimization for performance improvement and risk management of plant-wide operation. 567-579

Volume 34, Number 5, May 2010

• 
  Andrzej Kraslawski, Jan Thullie, Jacek M. Jezowski:
  Preface. 581

Product and Process Design

• 
  Nishanth G. Chemmangattuvalappil, Charles C. Solvason, Susilpa Bommareddy, Mario R. Eden:
  Combined property clustering and GC⁺ techniques for process and product design. 582-591
• 
  Cristhian Almeida-Rivera, Peter Bongers:
  Modelling and experimental validation of emulsification processes in continuous rotor-stator units. 592-597

Process Control and Operation

• 
  Jian Cui, Sebastian Engell:
  Medium-term planning of a multiproduct batch plant under evolving multi-period multi-uncertainty by means of a moving horizon strategy. 598-619
• 
  Karla Ossandón, Patricio Pinto, Luis A. Cisternas:
  Planning and scheduling of salt harvest in solar evaporation ponds. 620-630
• 
  Isaac Monroy, Raul Benitez, Gerard Escudero, Moisès Graells:
  A semi-supervised approach to fault diagnosis for chemical processes. 631-642
• 
  D. A. R. Zumoffen, Marta S. Basualdo:
  Advanced control for fuel cells connected to a DC/DC converter and an electric motor. 643-655

Modelling, Simulation, Optimisation and Process Integration

• 
  Davide Manca, Roberto Grana:
  Dynamic conceptual design of industrial processes. 656-667
• 
  Edrisi Muñoz, Antonio Espuña Camarasa, Luis Puigjaner:
  Towards an ontological infrastructure for chemical batch process management. 668-682
• 
  Mohd Kamaruddin Abd Hamid, Gürkan Sin, Rafiqul Gani:
  Integration of process design and controller design for chemical processes using model-based methodology. 683-699
• 
  István Heckl, Ferenc Friedler, L. T. Fan:
  Solution of separation-network synthesis problems by the P-graph methodology. 700-706
• 
  Luis F. Domínguez, Diogo A. C. Narciso, Efstratios N. Pistikopoulos:
  Recent advances in multiparametric nonlinear programming. 707-716
• 
  Joseph K. Scott, Paul I. Barton:
  Tight, efficient bounds on the solutions of chemical kinetics models. 717-731
• 
  Ivan Dones, Heinz A. Preisig:
  Model simplification and time-scale assumptions applied to distillation modelling. 732-743
• 
  Jan Stepánek, Petr Kocí, Frantisek Plát, Milos Marek, Milan Kubicek:
  Investigation of combined DOC and NSRC diesel car exhaust catalysts. 744-752
• 
  Zoltán Süle, Béla G. Lakatos, Csaba Mihálykó:
  Axial dispersion/population balance model of heat transfer in gas-solid turbulent fluidized beds. 753-762

New Frontiers in CAPE

• 
  Ian David Lockhart Bogle, Richard Allen, Tom Sumner:
  The role of Computer Aided Process Engineering in physiology and clinical medicine. 763-769
• 
  Jimena Di Maggio, Juan C. Diaz Ricci, María Soledad Díaz:
  Global sensitivity analysis in dynamic metabolic networks. 770-781
• 
  Hon Loong Lam, Petar Sabev Varbanov, Jirí Jaromír Klemes:
  Optimisation of regional energy supply chains utilising renewables: P-graph approach. 782-792
• 
  Behzad Behdani, Zofia Lukszo, Arief Adhitya, Rajagopalan Srinivasan:
  Performance analysis of a multi-plant specialty chemical manufacturing enterprise using an agent-based model. 793-801

CAPE in Sustainable Development

• 
  Jaime Rojas, Toshko Zhelev, Aarón David Bojarski:
  Modelling and sensitivity analysis of ATAD. 802-811
• 
  Anton A. Kiss:
  Separative reactors for integrated production of bioethanol and biodiesel. 812-820
• 
  Yu-Chuan Lin, L. T. Fan, Shahram Shafie, Botond Bertók, Ferenc Friedler:
  Graph-theoretic approach to the catalytic-pathway identification of methanol decomposition. 821-824
• 
  Denny Kok Sum Ng, Dominic Chwan Yee Foo, Raymond R. Tan, Mahmoud M. El-Halwagi:
  Automated targeting technique for concentration- and property-based total resource conservation network. 825-845
• 
  José Luis de la Mata, Manuel Rodríguez:
  Accident prevention by control system reconfiguration. 846-855

Volume 34, Number 6, June 2010

• 
  Beverly V. Smith, Marianthi G. Ierapepritou:
  Integrative chemical product design strategies: Reflecting industry trends and challenges. 857-865
• 
  Periasamy Vijay, Arun K. Samantaray, Amalendu Mukherjee:
  Development of a thermodynamically consistent kinetic model for reactions in the solid oxide fuel cell. 866-877
• 
  Matt J. Baker, Gavin R. Tabor:
  Computational analysis of transitional air flow through packed columns of spheres using the finite volume technique. 878-885
• 
  Robert Tuley, Matthew Danby, John Shrimpton, Mark Palmer:
  On the optimal numerical time integration for Lagrangian DEM within implicit flow solvers. 886-899
• 
  B. T. Baumrucker, Lorenz T. Biegler:
  MPEC strategies for cost optimization of pipeline operations. 900-913
• 
  Juan P. Ruiz, Ignacio E. Grossmann:
  Strengthening of lower bounds in the global optimization of Bilinear and Concave Generalized Disjunctive Programs. 914-930
• 
  Angelo Lucia, Bradley R. McCallum:
  Energy targeting and minimum energy distillation column sequences. 931-942
• 
  Timo Laukkanen, Tor-Martin Tveit, Vesa Ojalehto, Kaisa Miettinen, Carl-Johan Fogelholm:
  An interactive multi-objective approach to heat exchanger network synthesis. 943-952
• 
  Julian Bonilla Alarcon, Moritz Diehl, Filip Logist, Bart De Moor, Jan F. M. Van Impe:
  An automatic initialization procedure in parameter estimation problems with parameter-affine dynamic models. 953-964
• 
  Tyson John, Martin Guay, Nathan S. Hariharan, Satish Naranayan:
  POD-based observer for estimation in Navier-Stokes flow. 965-975
• 
  Yuan Tian, Lansun Chen, Andrzej Kasperski:
  Modelling and simulation of a continuous process with feedback control and pulse feeding. 976-984
• 
  K. Al-Qahtani, Ali Elkamel:
  Robust planning of multisite refinery networks: Optimization under uncertainty. 985-995
• 
  Zukui Li, Marianthi G. Ierapetritou:
  Production planning and scheduling integration through augmented Lagrangian optimization. 996-1006

Volume 34, Number 7, July 2010

• 
  Cynthia A. Oksanen, Salvador García Muñoz:
  Process modeling and control in drug development and manufacturing. 1007-1008
• 
  Concepción Jiménez-González, John M. Woodley:
  Bioprocesses: Modeling needs for process evaluation and sustainability assessment. 1009-1017
• 
  Derick C. Weis, Donald P. Visco:
  Computer-aided molecular design using the Signature molecular descriptor: Application to solvent selection. 1018-1029
• 
  Yubo Yang, Rosalin Tjia:
  Process modeling and optimization of batch fractional distillation to increase throughput and yield in manufacture of active pharmaceutical ingredient (API). 1030-1035
• 
  James W. Ivey, Reinhard Vehring:
  The use of modeling in spray drying of emulsions and suspensions accelerates formulation and process development. 1036-1040
• 
  Lisa J. Graham, Rebecca Taillon, Jim Mullin, Trevor Wigle:
  Pharmaceutical process/equipment design methodology case study: Cyclone design to optimize spray-dried-particle collection efficiency. 1041-1048
• 
  Gavin K. Reynolds, Rohit Ingale, Ron Roberts, Sanjeev Kothari, Bindhu Gururajan:
  Practical application of roller compaction process modeling. 1049-1057
• 
  John C. Cunningham, Denita Winstead, Antonios Zavaliangos:
  Understanding variation in roller compaction through finite element-based process modeling. 1058-1071
• 
  William R. Ketterhagen, Bruno C. Hancock:
  Optimizing the design of eccentric feed hoppers for tablet presses using DEM. 1072-1081
• 
  Gerard R. Klinzing, Antonios Zavaliangos, John C. Cunningham, Tracey Mascaro, Denita Winstead:
  Temperature and density evolution during compaction of a capsule shaped tablet. 1082-1091
• 
  Andrew Prpich, Mary T. am Ende, Thomas Katzschner, Veronika Lubczyk, Holger Weyhers, Georg Bernhard:
  Drug product modeling predictions for scale-up of tablet film coating - A quality by design approach. 1092-1097
• 
  Salvador García Muñoz, Stephanie Dolph, Howard W. Ward II:
  Handling uncertainty in the establishment of a design space for the manufacture of a pharmaceutical product. 1098-1107
• 
  Ravendra Singh, Krist V. Gernaey, Rafiqul Gani:
  ICAS-PAT: A software for design, analysis and validation of PAT systems. 1108-1136
• 
  Ravendra Singh, Krist V. Gernaey, Rafiqul Gani:
  An ontological knowledge-based system for the selection of process monitoring and analysis tools. 1137-1154
• 
  M. Berkan Sesen, Pradeep Suresh, René Bañares-Alcántara, Venkat Venkatasubramanian:
  An ontological framework for automated regulatory compliance in pharmaceutical manufacturing. 1155-1169

Volume 34, Number 8, August 2010

• 
  Mihaela Morar, Paul Serban Agachi:
  Review: Important contributions in development and improvement of the heat integration techniques. 1171-1179
• 
  Eric von Lieres, Joel Andersson:
  A fast and accurate solver for the general rate model of column liquid chromatography. 1180-1191
• 
  Cleo Kontoravdi, Efstratios N. Pistikopoulos, Athanasios Mantalaris:
  Systematic development of predictive mathematical models for animal cell cultures. 1192-1198
• 
  Ming Su, R. Russell Rhinehart:
  A generalized TSK model with a novel rule antecedent structure: Structure identification and parameter estimation. 1199-1219
• 
  Alaña Jorge Enrique:
  Estimation of the temporal coefficients for an empirical approximator. New approach based on the Proper Orthogonal Decomposition modes. 1220-1225
• 
  Turang Ahadi-Oskui, Stefan Vigerske, Ivo Nowak, George Tsatsaronis:
  Optimizing the design of complex energy conversion systems by Branch and Cut. 1226-1236
• 
  Georgios K. D. Saharidis, Marianthi G. Ierapetritou:
  Improving benders decomposition using maximum feasible subsystem (MFS) cut generation strategy. 1237-1245
• 
  Ramkumar Karuppiah, Mariano Martín, Ignacio E. Grossmann:
  A simple heuristic for reducing the number of scenarios in two-stage stochastic programming. 1246-1255
• 
  G. Mesfin, M. Shuhaimi:
  A chance constrained approach for a gas processing plant with uncertain feed conditions. 1256-1267
• 
  Gregor Gregorcic, Gordon Lightbody:
  Nonlinear model-based control of highly nonlinear processes. 1268-1281
• 
  Hiroya Seki, Morimasa Ogawa, Toshiaki Itoh, Shigeki Ootakara, Hisashi Murata, Yoshihiro Hashimoto, Manabu Kano:
  Plantwide control system design of the benchmark vinyl acetate monomer production plant. 1282-1295
• 
  Amiya K. Jana, Santosh V. Mali:
  Analysis and control of a partially heat integrated refinery debutanizer. 1296-1305
• 
  Fumiyoshi Yamashita, Takayuki Itoh, Shuya Yoshida, Mohammad K. Haidar, Mitsuru Hashida:
  A novel multi-dimensional visualization technique for understanding the design parameters of drug formulations. 1306-1311
• 
  Ravindra S. Kamath, Ignacio E. Grossmann, Lorenz T. Biegler:
  Aggregate models based on improved group methods for simulation and optimization of distillation systems. 1312-1319

Volume 34, Number 9, September 2010

• 
  Andreas A. Linninger, Mahmoud M. El-Halwagi:
  Preface. 1321-1322

I. Energy systems design and alternative energy sources

• 
  Aly Eldeen Eltayeb, Omar Khalil, Said Al-Hallaj, Fouad Teymour:
  Design and modeling of optical modules for use in the "Emerald Forest" algae photobioreactors. 1323-1340
• 
  Christos Panos, Konstantinos I. Kouramas, Michael C. Georgiadis, Efstratios N. Pistikopoulos:
  Dynamic optimization and robust explicit model predictive control of hydrogen storage tank. 1341-1347

II. Design for sustanablity and energy efficiency

• 
  Urmila M. Diwekar, Yogendra N. Shastri:
  Green process design, green energy, and sustainability: A systems analysis perspective. 1348-1355
• 
  Di Lu, Matthew J. Realff:
  Point-based standard optimization with life cycle assessment for product design. 1356-1364

III. Robust and uncertain systems

• 
  Ignacio E. Grossmann, Gonzalo Guillén-Gosálbez:
  Scope for the application of mathematical programming techniques in the synthesis and planning of sustainable processes. 1365-1376
• 
  Yu Zhu, Sean Legg, Carl D. Laird:
  Optimal design of cryogenic air separation columns under uncertainty. 1377-1384
• 
  Gürkan Sin, Anne S. Meyer, Krist V. Gernaey:
  Assessing reliability of cellulose hydrolysis models to support biofuel process design - Identifiability and uncertainty analysis. 1385-1392

IV. Design of biofuels biological process and biorefineries

• 
  John Regalbuto:
  An NSF perspective on next generation hydrocarbon biorefineries. 1393-1396
• 
  Antonis C. Kokossis, Aidong Yang:
  On the use of systems technologies and a systematic approach for the synthesis and the design of future biorefineries. 1397-1405
• 
  Luke D. Simoni, Alexandre Chapeaux, Joan F. Brennecke, Mark A. Stadtherr:
  Extraction of biofuels and biofeedstocks from aqueous solutions using ionic liquids. 1406-1412

V. Emerging technologies and processes for the environment

• 
  Robert A. Urban, Bhavik R. Bakshi, Geoffrey F. Grubb, Anil Baral, William J. Mitsch:
  Towards sustainability of engineered processes: Designing self-reliant networks of technological-ecological systems. 1413-1420
• 
  Thomas E. Marlin:
  Teaching "operability" in undergraduate chemical engineering design education. 1421-1431

VI. Multi-scale and complex systems

• 
  Ruth Misener, Chrysanthos E. Gounaris, Christodoulos A. Floudas:
  Mathematical modeling and global optimization of large-scale extended pooling problems with the (EPA) complex emissions constraints. 1432-1456
• 
  Sujit S. Jogwar, Michael Baldea, Prodromos Daoutidis:
  Tight energy integration: Dynamic impact and control advantages. 1457-1466
• 
  Angelo Lucia:
  Multi-scale methods and complex processes: A survey and look ahead. 1467-1475

VII. Product and process design I

• 
  Samantha E. McLeese, John C. Eslick, Nicholas J. Hoffmann, Aaron M. Scurto, Kyle V. Camarda:
  Design of ionic liquids via computational molecular design. 1476-1480
• 
  Susilpa Bommareddy, Nishanth G. Chemmangattuvalappil, Charles C. Solvason, Mario R. Eden:
  Simultaneous solution of process and molecular design problems using an algebraic approach. 1481-1486

VIII. Product and process design II

• 
  Diane Hildebrandt, Daniel A. Beneke, Ronald Abbas, Simon T. Holland, Michaela Vrey, David Glasser:
  Column profile maps as a tool for synthesizing complex column configurations. 1487-1496
• 
  Behrang Mansoornejad, Virginie Chambost, Paul Stuart:
  Integrating product portfolio design and supply chain design for the forest biorefinery. 1497-1506
• 
  Manuel Hechinger, Wolfgang Marquardt:
  Targeted QSPR for the prediction of the laminar burning velocity of biofuels. 1507-1514

IX. Emerging tools and techniques in process design

• 
  Ipsita Banerjee, Siladitya Pal, Spandan Maiti:
  Computationally efficient black-box modeling for feasibility analysis. 1515-1521
• 
  Cheng-Liang Chen, Szu-Wen Hung, Jui-Yuan Lee:
  Design of inter-plant water network with central and decentralized water mains. 1522-1531
• 
  Stephen E. Zitney:
  Process/equipment co-simulation for design and analysis of advanced energy systems. 1532-1542
• 
  Heinz A. Preisig:
  Constructing and maintaining proper process models. 1543-1555
• 
  Gerardo J. Ruiz-Mercado, Seon B. Kim, Jeonghwa Moon, Libin Zhang, Andreas A. Linninger:
  Design and optimization of energy efficient complex separation networks. 1556-1563

Volume 34, Number 10, October 2010

• 
  Venkat Venkatasubramanian, Rafiqul Gani:
  Editorial. 1565-1566
• 
  Oscar Andrés Prado-Rubio, Martin Møllerhøj, Sten Bay Jørgensen, Gunnar Jonsson:
  Modeling Donnan dialysis separation for carboxylic anion recovery. 1567-1579
• 
  Thanh D. B. Nguyen, Young-Il Lim, Won-Hyeon Eom, Seong-Joon Kim, Kyung-Seun Yoo:
  Experiment and CFD simulation of hybrid SNCR-SCR using urea solution in a pilot-scale reactor. 1580-1589
• 
  Alessandra Saraceno, Stefano Curcio, Vincenza Calabrò, Gabriele Iorio:
  A hybrid neural approach to model batch fermentation of "ricotta cheese whey" to ethanol. 1590-1596
• 
  Yingying Chen, Karlene A. Hoo:
  Uncertainty propagation for effective reduced-order model generation. 1597-1605
• 
  A. Aspelund, Truls Gundersen, J. Myklebust, Matthias P. Nowak, Asgeir Tomasgard:
  An optimization-simulation model for a simple LNG process. 1606-1617
• 
  Balram Suman, Nazish Hoda, Shweta Jha:
  Orthogonal simulated annealing for multiobjective optimization. 1618-1631
• 
  Abhigyan Gupta, Pallab Ghosh:
  A randomized algorithm for the efficient synthesis of heat exchanger networks. 1632-1639
• 
  G. Modla:
  Pressure swing batch distillation by double column systems in closed mode. 1640-1654
• 
  Stevan Dubljevic:
  Boundary model predictive control of Kuramoto-Sivashinsky equation with input and state constraints. 1655-1661
• 
  Victor M. Zavala:
  Stability analysis of an approximate scheme for moving horizon estimation. 1662-1670
• 
  Ugur Yüzgeç, Ahmet Palazoglu, José A. Romagnoli:
  Refinery scheduling of crude oil unloading, storage and processing using a model predictive control strategy. 1671-1686
• 
  Diego C. Cafaro, Jaime Cerdá:
  Operational scheduling of refined products pipeline networks with simultaneous batch injections. 1687-1704
• 
  María Analía Rodríguez, Aldo R. Vecchietti:
  Inventory and delivery optimization under seasonal demand in the supply chain. 1705-1718
• 
  Carlos Pozo, Gonzalo Guillén-Gosálbez, Albert Sorribas, Laureano Jiménez:
  Outer approximation-based algorithm for biotechnology studies in systems biology. 1719-1730
• 
  Alireza Bahadori, Hari B. Vuthaluru:
  A new method for prediction of absorption/stripping factors. 1731-1736

Volume 34, Number 11, November 2010

• 
  Johan Åkesson, Karl-Erik Årzén, Magnus Gäfvert, Tove Bergdahl, Hubertus Tummescheit:
  Modeling and optimization with Optimica and JModelica.org - Languages and tools for solving large-scale dynamic optimization problems. 1737-1749
• 
  Manoj Kumar, Neelima Singh:
  Modified Adomian Decomposition Method and computer implementation for solving singular boundary value problems arising in various physical problems. 1750-1760
• 
  Ilkka Malinen, Juha Tanskanen:
  Homotopy parameter bounding in increasing the robustness of homotopy continuation methods in multiplicity studies. 1761-1774
• 
  Ben Bettens, Adrian Verhoef, Henk M. van Veen, Carlo Vandecasteele, Jan Degrève, Bart Van der Bruggen:
  Pervaporation of binary water-alcohol and methanol-alcohol mixtures through microporous methylated silica membranes: Maxwell-Stefan modeling. 1775-1788
• 
  Debangsu Bhattacharyya, Raghunathan Rengaswamy:
  Dimensional optimization of a tubular solid oxide fuel cell. 1789-1802
• 
  Vidar Gunnerud, Bjarne A. Foss:
  Oil production optimization - A piecewise linear model, solved with two decomposition strategies. 1803-1812
• 
  Mohammad Mehdi Montazer-Rahmati, Reyhaneh Binaee:
  Multi-objective optimization of an industrial hydrogen plant consisting of a CO₂ absorber using DGA and a methanator. 1813-1821
• 
  Rahul Anantharaman, I. Nastad, Bjørn Nygreen, Truls Gundersen:
  The sequential framework for heat exchanger network synthesis - The minimum number of units sub-problem. 1822-1830
• 
  Zdravko Kravanja:
  Challenges in sustainable integrated process synthesis and the capabilities of an MINLP process synthesizer MipSyn. 1831-1848
• 
  Nicholas Depree, James Sneyd, Stephen W. Taylor, Mark P. Taylor, John J. J. Chen, S. Wang, M. O'Connor:
  Development and validation of models for annealing furnace control from heat transfer fundamentals. 1849-1853
• 
  Jiu-sun Zeng, Chuanhou Gao, Hongye Su:
  Data-driven predictive control for blast furnace ironmaking process. 1854-1862
• 
  Lyne Woodward, Michel Perrier, Bala Srinivasan:
  Real-time optimization using a jamming-free switching logic for gradient projection on active constraints. 1863-1872
• 
  Arndt Hartwich, Wolfgang Marquardt:
  Dynamic optimization of the load change of a large-scale chemical plant by adaptive single shooting. 1873-1889
• 
  Ulaganathan Nallasivam, Babji Srinivasan, Raghunathan Rengaswamy:
  Stiction identification in nonlinear process control loops. 1890-1898
• 
  Kristian Nolde, Manfred Morari:
  Electrical load tracking scheduling of a steel plant. 1899-1903
• 
  Guido Buzzi Ferraris, Flavio Manenti:
  Better reformulation of kinetic models. 1904-1906

Volume 34, Number 12, December 2010

• 
  Rita Maria Brito Alves, Claudio Augusto Oller Nascimento, Evaristo Chalbaud Biscaia Jr.:
  Preface. 1907-1908
• 
  Manuel Hechinger, A. Voll, Wolfgang Marquardt:
  Towards an integrated design of biofuels and their production pathways. 1909-1918
• 
  Sebastian Terrazas-Moreno, Ignacio E. Grossmann, John M. Wassick, Scott J. Bury:
  Optimal design of reliable integrated chemical production sites. 1919-1936
• 
  Luz A. Alvarez, Darci Odloak:
  Robust integration of real time optimization with linear model predictive control. 1937-1944
• 
  Jing J. Liu, Cai Y. Ma, Yang D. Hu, Xue Z. Wang:
  Effect of seed loading and cooling rate on crystal size and shape distributions in protein crystallization - A study using morphological population balance simulation. 1945-1952
• 
  Andres F. Hernandez, Martha A. Grover:
  Stochastic dynamic predictions using Gaussian process models for nanoparticle synthesis. 1953-1961
• 
  Antonio E. Bresciani, Candido F. X. Mendonça, Rita Maria Brito Alves, Claudio Augusto Oller Nascimento:
  Modeling the kinetics of the coalescence of water droplets in crude oil emulsions subject to an electric field, with the cellular automata technique. 1962-1968
• 
  Achim Küpper, Leonard Wirsching, Moritz Diehl, Johannes P. Schlöder, Hans Georg Bock, Sebastian Engell:
  Online identification of adsorption isotherms in SMB processes via efficient moving horizon state and parameter estimation. 1969-1983
• 
  Jovani L. Favero, Argimiro R. Secchi, Nilo Sérgio Medeiros Cardozo, Hrvoje Jasak:
  Viscoelastic fluid analysis in internal and in free surface flows using the software OpenFOAM. 1984-1993
• 
  Adrián Ferrari, Soledad Gutiérrez, Evaristo Chalbaud Biscaia Jr.:
  Development of an optimal operation strategy in a sequential batch reactor (SBR) through mixed-integer particle swarm dynamic optimization (PSO). 1994-1998
• 
  Glauce De Souza, Darci Odloak, Antônio C. Zanin:
  Real time optimization (RTO) with model predictive control (MPC). 1999-2006
• 
  Junya Nishiguchi, Tsutomu Takai:
  IPL2 and 3 performance improvement method for process safety using event correlation analysis. 2007-2013
• 
  Marco S. Reis, Armin Bauer:
  Image-based classification of paper surface quality using wavelet texture analysis. 2014-2021
• 
  Francesco Corona, Michela Mulas, Roberto Baratti, José A. Romagnoli:
  On the topological modeling and analysis of industrial process data using the SOM. 2022-2032
• 
  Martin Gassner, François Maréchal:
  Combined mass and energy integration in process design at the example of membrane-based gas separation systems. 2033-2042
• 
  Merlin Alvarado-Morales, Mohd Kamaruddin Abd Hamid, Gürkan Sin, Krist V. Gernaey, John M. Woodley, Rafiqul Gani:
  A model-based methodology for simultaneous design and control of a bioethanol production process. 2043-2061
• 
  Nishanth G. Chemmangattuvalappil, Charles C. Solvason, Susilpa Bommareddy, Mario R. Eden:
  Reverse problem formulation approach to molecular design using property operators based on signature descriptors. 2062-2071
• 
  Silvia Ochoa, Günter Wozny, Jens-Uwe Repke:
  A new algorithm for global optimization: Molecular-Inspired Parallel Tempering. 2072-2084
• 
  Ravindra S. Kamath, Lorenz T. Biegler, Ignacio E. Grossmann:
  An equation-oriented approach for handling thermodynamics based on cubic equation of state in process optimization. 2085-2096
• 
  Luis F. Domínguez, Efstratios N. Pistikopoulos:
  Multiparametric programming based algorithms for pure integer and mixed-integer bilevel programming problems. 2097-2106
• 
  José Miguel Laínez, Gintaras V. Reklaitis, Luis Puigjaner:
  Linking marketing and supply chain models for improved business strategic decision support. 2107-2117
• 
  Jie Li, Iftekhar A. Karimi, Rajagopalan Srinivasan:
  Efficient bulk maritime logistics for the supply and delivery of multiple chemicals. 2118-2128
• 
  Juan M. Novas, Gabriela P. Henning:
  Reactive scheduling framework based on domain knowledge and constraint programming. 2129-2148