Abstract
Successful products are those presenting the highest quality at a fair cost. Although different approaches can be used to define the concept of quality, functional reliability is always a major requirement, due to implications such as safety and user losses regarding maintenance expenses, and product availability. Intelligent designs are robust and result in a fair cost. Robust designs are those insensitive to sources of variation occurring during the product life, keeping their performance under variable use conditions, like thermal and stress effects. The robustness approach is a function of two main design criteria: low complexity and tolerance design. Design for manufacture and assembly is closely related to decreasing complexity. Tolerance design is a tool in which the unavoidable manufacturing variations are considered during product development. This work presents a proposal for an intelligent design in an actual application by considering design simplification through the reduction of parts for an automotive water pump. The tolerance analysis is performed by means of a powerful statistical approach—a Monte Carlo simulation—in which process behavior is randomly simulated representing a high production volume. Additionally, service thermal effects are also contemplated, and assembly tests are proposed for automatic rejection of non-conforming parts, assuring high reliability and full compliance with functional requirements. This is an example of integrated design–manufacturing work aiming at both cost saving and improved reliability.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Allen, D. J., & Lasecki, M. P. (2001). Thermal management evolution and controlled coolant flow. In SAE technical papers. SAE International. ISSN 26883627, 2001–01–1732.
Altintas, Y. (2011). Manufacturing automation. Cambridge: Cambridge University Press.
Anderson, D. M. (2014). Design for manufacturability: How to use concurrent engineering to rapidly develop low-cost, high-quality products for lean production. Abingdon: Taylor and Francis. ISBN 9781482204940.
Annamalai, K., Naiju, C. D., Karthik, S., & Prashanth, M. M. (2013). Early cost estimate of product during design stage using design for manufacturing and assembly (DFMA) principles. Advanced Materials Research, 622–623, 540–544.
Barari, A. (2012). Tolerance allocation for structures subject to various loading event. In: ASME international design engineering technical conferences and computers and information in engineering conference, ASME.
Barari, A., & Pop-Iliev, R. (2009). Reducing rigidity by implementing closed-loop engineering in adaptable design and manufacturing systems. Journal of Manufacturing Systems, 28(2–3), 47–54.
Belay, A. M. (2009). Design for manufacturability and concurrent engineering for product development. International Journal of Industrial and Manufacturing Engineering, 3(1), 1–7.
Benavides, E. M. (2011). Advanced engineering design: An integrated approach. Woodhead Publishing Limited. ISBN 9780857090935.
Björkman, J. (2015). Development of pump geometry for engine cooling system. Master’s thesis, KTH School of Industrial Engineering and Management, Sweden.
Blake, A. (1982). Practical stress analysis in engineering design. New York: Marcel Decker Inc.
Bogue, R. (2012). Design for manufacture and assembly: Background, capabilities and applications. Assembly Automation, 32(2), 112–118.
Boothroyd, G., Dewhurst, P., & Knight, W. A. (2010). Product design for manufacture and assembly (3rd ed.) (Manufacturing Engineering and Ma...). Boca Raton: CRC Press. ISBN 9781420089271.
Boothroyd, G., & Radovanovic, P. (1989). Estimating the cost of machined components during the conceptual design of a product. Annals of the ClRP, 38(1/1989), 157–160.
Boothroyd, G., & Reynolds, C. (1989). Approximate cost estimates for typical turned parts. Journal of Manufacturing Systems, 8(3), 185–193.
Budiono, H. D. S., Kiswanto, G., & Soemardi, T. P. (2014). Method and model development for manufacturing cost estimation during the early design phase related to the complexity of the machining processes. International Journal of Technology, 2, 183–192.
Clausing, D. (1994). Total quality development: A step-by-step guide to world-class concurrent engineering, The American Society of Mechanical Engineers.
D. Engineering. (2003). Guidelines for failure mode and effects analysis for automotive, aerospace and general manufacturing industries. Boca Raton: Dyadem Press.
Dewhurst, P., & Boothroyd, G. (1988). Early cost estimating in product design. Journal of Manufacturing Systems, 7(3), 183–191.
DIN 16742. (2013). Plastics moulded parts—Tolerances and acceptance conditions. SAI Global, Standard, Deutsches Institut für Normung, Germany.
Dobrovolsky, V., Zablonsky, K., Mak, S., Radchik, A., & Erlink, L. (1974). Machine elements—A textbook. New Orleans: Peace Publishers.
E Caldeira, L. G. O., Pockszevnicki, B. C., De Assis, G. M., & dos Santos Magalhães, D. F. (2017). Automotive water pump methodology using head pump and rotor power for correlations. In SAE technical papers, November. SAE International. ISSN 01487191, 2017–36–0398.
Fysikopoulos, A., Papacharalampopoulos, A., Pastras, G., Stavropoulos, P., & Chryssolouris, G. (2013). Energy efficiency of manufacturing processes: A critical review. Procedia CIRP, 7, 628–633.
Gurney, J. P.(1964). An analysis of centerless grinding. ASME Journal of Engineering for Industry (63—WA-26), 163–174.
Hammersley, J. M., & Handscomb, D. C. (1975). Monte Carlo methods. London: Methuen & Co., Ltd.
Harper, C. H. (1999). Modern plastics handbook/Modern plastics. New York: McGraw-Hill.
Haugen, E. (1968). Probabilistic approaches to design. New York: Wiley.
INA-FAG. (2014). Water pump bearings—Integral shaft bearings. Herzogenaurach: Schaeffler Technologies GmbH & Co. KG.
Jung, Y.-J. (2002). Manufactutring cost estimation for machined parts based on manufacturing features. Journal of Intelligent Manufacturing, 13, 227–238.
Kolbachev, E. (2017). Management of mechanical engineering design processes based on product cost estimates. In SHS web of conferences (pp. 1–5).
Lee, D.-I., & Lim, H.-C. (2009). Erosion–corrosion damages of water-pump impeller. International Journal of Automotive Technology, 10(5), 629–634.
Li, B., Zhang, H.-C., Ke, Q., Ding, L., & Zhang, L. (2011). Overview of energy consumption model for manufacturing processes. In Applied mechanics and materials (Vol. 130–134, pp. 2288–2293). Trans Tech Publications, Ltd. https://doi.org/10.4028/www.scientific.net/amm.130--134.2288
Li, W. (2015). Efficiency of manufacturing processes—Energy and ecological perspectives. Cham: Springer International Publishing.
NSK. (2005). High durability NSK water pump bearings—Catalog No. E396a 2005 C9, NSK Limited.
Occupational Employment and Wages. (2019). 51-4034 Lathe and turning machine tool setters, operators, and tenders, metal and plastic. US Bureau of Labor Statistics. Retrieved October 31, 2020 from https://www.bls.gov/Oes/current/oes514034.htm.
O’Driscoll, M. (2002). Design for manufacture. Journal of Materials Processing Technology, 122, 318–321.
Online Document Star Rapid—Tolerance Guide. (2020). https://www.starrapid.com/wp-content/uploads/2016/11/Star-Rapid- Plastic-Injection-Molding-Tolerance-Guide.pdf. Star Rapid.
Park, H., Cha, B., Cho, S., Kim, D., Choi, J. H., Pyo, B. G., et al. (2016). A study on the estimation of plastic deformation of metal insert parts in multi-cavity injection molding by injection-structural coupled analysis. The International Journal of Advanced Manufacturing Technology, 83, 2057–2069.
Patel, J. K., & Read, C. B. (1982). Handbook of the normal distribution. New York: Marcel Dekker Inc.
PPS Datasheet. (2020). Bearing Works. Retrieved October 31, 2020 from https://www.bearingworks.com/uploadedassets/pdfs/retainers/ppsdatasheet.pdf. datasheet, Bearing Works.
Raw Materials and Prices. (2020). Plasticker—The home of plastics. Retrieved October 31, 2020 from https://plasticker.de/preise/pms_en.php?show=ok&make=ok&aog=A&kat=Mahlgut.
Rosato, D. V., Rosato, D. V., & Rosato, M. G. (2000). Injection molding handbook (3rd ed.). Berlin: Springer.
Rowe, W. B. (2009). Principles of modern grinding technology. Amsterdam: William Andrew-Elsevier.
Ryton\({\copyright }\). (2020). Technical / Product Data Sheet (TDS/PDS). https://www.solvay.com/en/product/ryton-r-4
Ryton. (2017). PPS design guide. Solvay Specialty Polymers, Ryton.
Salomone, T. (1995). What every engineer should know about concurrent engineering. New York: Marcel Dekker Inc.
Saravi, M., Newnes, L., Mileham, A. E., & Goh, Y. M. (2019). Estimating cost at the conceptual design stage to optimize design in terms of performance and cost. In Loughborough’s Institutional Repository (pp. 1–5). Springer.
Schmid, S. R., Hamrock, B., & Jacobson, B. O. (2014). Fundamentals of machine elements SI version (3rd ed.). Boca Raton: CRC Press.
Stamatis, D. H. (2003). Failure mode and effect analysis FMEA from theory to execution (2nd ed.). Milwaukee: ASQ Quality Press.
Standards and Practices of Plastic Molders. (1998). Guidelines for molders and their customers, SPI Molders Division.
Stjepandić, J., Wognum, N., & Verhagen, W. J. C. (2015). Concurrent engineering in the 21st century. Cham: Springer International Publishing AG.
Su, J. C. P., Chu, C.-H., & Wang, Y.-T. (2012). A decision support system to estimate the carbon emission and cost of product designs. International Journal of Precision Engineering and Manufacturing, 13(7), 1037–1045.
Swift, K. G., & Booker, J. D. (2003). Process selection from design to manufacture (2nd ed.). Oxford: Butterworth-Heinemann-Elsevier.
Taguchi, G. (1989). Introduction to quality engineering—Designing quality into products and processes. Tokyo: Asian Productivity Organization.
Taguchi, G. (1993). Taguchi on robust technology development: Bringing quality engineering upstream. London: ASME Press.
Taguchi, G., Elsayed, E. A., & Hsiang, T. C. (1989). Quality engineering in production systems. New York City: McGraw Hill Inc.
Tasuni, M. L. M., Latiff, Z. A., Nasution, H., Perang, M. R. M., Jamil, H. M., & Misseri, M. N. (2016). Performance of a water pump in an automotive cooling system. Jurnal Teknology, 78(10–2), 47–53 .
Ugural, A. C., & Fenster, S. K. (2012). Advanced mechanics of materials and applied elasticity. Upper Saddle River: Prentice Hall.
Umaras, E., Tsuzuki, M. S. G., & Barari, A. (2019). Intelligent design tolerance allocation for optimum adaptability to manufacturing using a Monte Carlo approach. In 13th IFAC Workshop on Intelligent Manufacturing Systems—IMS.
World Steel Prices. (2020). MEPS International Ltd. Retrieved October 31, 2020 from https://www.meps.co.uk/gb/en/products/world-steel-prices.
Yankee, H. W. (1979). Manufacturing processes. Upper Saddle River: Prentice-Hall Inc.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Umaras, E., Barari, A. & Tsuzuki, M.S.G. Tolerance analysis based on Monte Carlo simulation: a case of an automotive water pump design optimization. J Intell Manuf 32, 1883–1897 (2021). https://doi.org/10.1007/s10845-020-01695-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10845-020-01695-7