CM-150 Task Code Download Guide

Preparation

1. R+Task 2.0 software must be installed on the PC.
   R+Task 2.0 Download

2. Open the Task Code file(*.tsk) from R+Task 2.0.

3. Connect the battery(LB-041) to the controller(CM-150) and turn on the controller.

4. Connect the controller(CM-150) and the PC using a micro USB cable.

Download

1. Check if PC and the controller are connected with a micro USB cable.

2. Check if the Controller(CM-150) is powered on.

3. Select Device 1 as shown below.

   

4. Select discovered device 2 from the list and click 3 confirm button.
   • If the device does not appear in the list, check step 1 and 2.

   

5. Select Download 4 as shown below.

   

6. When task code download is completed, a success message will appear.