Added freq_meter module

pConst · pConst · commit 4eae34a978ef · 2023-12-15T00:13:23.000+03:00
diff --git a/freq_meter.sv b/freq_meter.sv
@@ -0,0 +1,122 @@
+//------------------------------------------------------------------------------
+// freq_meter.sv
+// published as part of https://github.com/pConst/basic_verilog
+// Konstantin Pavlov, pavlovconst@gmail.com
+//------------------------------------------------------------------------------
+
+// INFO ------------------------------------------------------------------------
+// frequency meter counts how many periods of test clock happen within
+// a given large time base.
+// Frequency value in MHz is proportional to system clock as readout/timebase
+//
+
+/* --- INSTANTIATION TEMPLATE BEGIN ---
+
+freq_meter fm1 (
+  .clk( clk ),  // 62.5 MHz expected
+  .nrst( nrst ),
+
+  .test_clk(  ),
+  .test_ena(  ),
+
+  .readout(  )
+);
+
+--- INSTANTIATION TEMPLATE END ---*/
+
+
+module freq_meter (
+  input clk,                  // system clock, 62.5 MHz expected
+  input nrst,                 // reset (inversed)
+
+  input test_clk,             // signal to count
+  input test_ena,             // enable counting signal (in test_clk domain)
+
+  output [31:0] readout = '0  // number of test_clk complete cycles per
+);                            // 1073741,824 mks time base
+
+
+  logic [31:0] clk_div;
+  clk_divider #(
+    .WIDTH( 32 )
+  ) sys_cd (
+    .clk( clk ),
+    .nrst( nrst ),
+    .ena( 1'b1 ),
+    .out(  )
+  );
+
+  // synchronizing into test frequency time domain
+  logic start_new_count;
+
+  delay #(
+      .LENGTH( 2 ),
+      .WIDTH( 1 )
+  ) sstart_new_count_d_SYNC_ATTR (
+      .clk( test_clk ),
+      .nrst( 1'b1 ),
+      .ena( 1'b1 ),
+      .in( clk_div[15] ),  // defines the timebase
+      .out( start_new_count )
+  );
+
+  // detecting rising edge of start condition
+  logic start_new_count_rise;
+
+  edge_detect start_new_count_ed (
+    .clk( test_clk ),
+    .nrst( 1'b1 ),
+    .in( start_new_count ),
+    .rising( start_new_count_rise ),
+    .falling(  ),
+    .both(  )
+  );
+
+  logic [31:0] cntr_tc = 31'b1;
+
+  logic [31:0] readout_tc = '0;
+  logic        readout_tc_valid = 1'b0;
+
+  always_ff @(posedge test_clk) begin
+    if( start_new_count_rise ) begin
+
+      // every counter refreshes approx. once in a second and holds a value of
+      // test freq complete periods over 1073741,824 mks
+      readout_tc[31:0] <= cntr_tc[31:0];
+      readout_tc_valid <= 1'b1;
+
+      cntr_tc[31:0] <= 1;
+    end else if( test_ena ) begin
+      readout_tc_valid <= 1'b0;
+
+      cntr_tc[31:0] <= cntr_tc[31:0] + 1'b1;
+    end
+  end
+
+  // synchronizing back into clk time domain
+  logic readout_valid;
+  cdc_strobe readout_valid_tc_cdc (
+    .arst( 1'b0 ),
+
+    .clk1( test_clk ),
+    .nrst1( 1'b1 ),
+    .strb1( readout_tc_valid ),
+
+    .clk2( clk ),
+    .nrst2( nrst ),
+    .strb2( readout_valid )
+  );
+
+
+  always_ff @(posedge clk) begin
+    if( ~nrst ) begin
+      readout[31:0] <= '0;
+    end else begin
+      if( readout_valid ) begin
+        readout[31:0] <= readout_tc[31:0];
+      end
+    end
+  end
+
+endmodule
+
