diff --git a/ports/espressif/boards/adafruit_sparkle_motion_stick/board.c b/ports/espressif/boards/adafruit_sparkle_motion_stick/board.c new file mode 100644 index 0000000000000..a3a9eec047145 --- /dev/null +++ b/ports/espressif/boards/adafruit_sparkle_motion_stick/board.c @@ -0,0 +1,9 @@ +// This file is part of the CircuitPython project: https://circuitpython.org +// +// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries +// +// SPDX-License-Identifier: MIT + +#include "supervisor/board.h" + +// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here. diff --git a/ports/espressif/boards/adafruit_sparkle_motion_stick/mpconfigboard.h b/ports/espressif/boards/adafruit_sparkle_motion_stick/mpconfigboard.h new file mode 100644 index 0000000000000..fdc289fb845f3 --- /dev/null +++ b/ports/espressif/boards/adafruit_sparkle_motion_stick/mpconfigboard.h @@ -0,0 +1,19 @@ +// This file is part of the CircuitPython project: https://circuitpython.org +// +// SPDX-FileCopyrightText: Copyright (c) 2022 Dan Halbert for Adafruit Industries +// +// SPDX-License-Identifier: MIT + +#pragma once + +// Micropython setup + +#define MICROPY_HW_BOARD_NAME "Adafruit Sparkle Motion Stick" +#define MICROPY_HW_MCU_NAME "ESP32" + +#define MICROPY_HW_LED_STATUS (&pin_GPIO4) +#define MICROPY_HW_NEOPIXEL (&pin_GPIO18) + +// UART pins attached to the USB-serial converter chip +#define CIRCUITPY_CONSOLE_UART_TX (&pin_GPIO1) +#define CIRCUITPY_CONSOLE_UART_RX (&pin_GPIO3) diff --git a/ports/espressif/boards/adafruit_sparkle_motion_stick/mpconfigboard.mk b/ports/espressif/boards/adafruit_sparkle_motion_stick/mpconfigboard.mk new file mode 100644 index 0000000000000..dafd6c1231a0a --- /dev/null +++ b/ports/espressif/boards/adafruit_sparkle_motion_stick/mpconfigboard.mk @@ -0,0 +1,11 @@ +CIRCUITPY_CREATOR_ID = 0x0000239A +CIRCUITPY_CREATION_ID = 0x00320008 + +IDF_TARGET = esp32 + +CIRCUITPY_ESP_FLASH_MODE = qio +CIRCUITPY_ESP_FLASH_FREQ = 80m +CIRCUITPY_ESP_FLASH_SIZE = 4MB + +CIRCUITPY_BLEIO_NATIVE = 0 +CIRCUITPY_ESPCAMERA = 0 diff --git a/ports/espressif/boards/adafruit_sparkle_motion_stick/pins.c b/ports/espressif/boards/adafruit_sparkle_motion_stick/pins.c new file mode 100644 index 0000000000000..a73c0e63f2ef6 --- /dev/null +++ b/ports/espressif/boards/adafruit_sparkle_motion_stick/pins.c @@ -0,0 +1,32 @@ +// This file is part of the CircuitPython project: https://circuitpython.org +// +// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries +// +// SPDX-License-Identifier: MIT + +#include "shared-bindings/board/__init__.h" + +static const mp_rom_map_elem_t board_module_globals_table[] = { + CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS + + { MP_ROM_QSTR(MP_QSTR_BOOT), MP_ROM_PTR(&pin_GPIO0) }, + { MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_GPIO0) }, + { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO0) }, + + { MP_ROM_QSTR(MP_QSTR_IR_RX), MP_ROM_PTR(&pin_GPIO10) }, + { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO10) }, + { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO12) }, + { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO13) }, + { MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_GPIO14) }, + + { MP_ROM_QSTR(MP_QSTR_D21), MP_ROM_PTR(&pin_GPIO21) }, + { MP_ROM_QSTR(MP_QSTR_D22), MP_ROM_PTR(&pin_GPIO22) }, + + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO18) }, + { MP_ROM_QSTR(MP_QSTR_D18), MP_ROM_PTR(&pin_GPIO18) }, + + { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO4) }, + { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_GPIO4) }, + +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table); diff --git a/ports/espressif/boards/adafruit_sparkle_motion_stick/sdkconfig b/ports/espressif/boards/adafruit_sparkle_motion_stick/sdkconfig new file mode 100644 index 0000000000000..e69de29bb2d1d
Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.
Alternative Proxies: