Open
Description
Background info
According to arduino/arduino-examples#47 there is a special Blink.ino for the Nicle Sense ME, which according to https://docs.arduino.cc/software/ide-v1/tutorials/getting-started/cores/arduino-mbed_nicla also applies to the Nicla Vision. This is called Blink_Nicla.ino.
It can be found in this repo here: https://github.com/arduino/ArduinoCore-mbed/blob/master/libraries/Nicla_System/examples/Blink_Nicla/Blink_Nicla.ino
Expected behaviour
I can compile the Blink_Nicla.ino sketch to both the Nicla Sense ME as well as the Nicla Vision
Current Behaviour
When the Nicla Sense ME is selected, IDE 2 compiles without error.
However, when compiling for the Nicla Vision, it fails to compile.
Error message is as below
In file included from C:\Users\user\AppData\Local\Arduino15\packages\arduino\hardware\mbed_nicla\3.5.1\libraries\Nicla_System\src/Nicla_System.h:6:0,
from C:\Users\user\AppData\Local\Temp\.arduinoIDE-unsaved2023030-12348-k6zwi4.8tz8\Blink_Nicla\Blink_Nicla.ino:1:
C:\Users\user\AppData\Local\Arduino15\packages\arduino\hardware\mbed_nicla\3.5.1\libraries\Nicla_System\src/RGBled.h:91:14: error: expected identifier before numeric constant
#define Mode 1
^
C:\Users\user\AppData\Local\Arduino15\packages\arduino\hardware\mbed_nicla\3.5.1\cores\arduino/mbed/drivers/include/drivers/interfaces/InterfaceCAN.h:150:10: note: in expansion of macro 'Mode'
enum Mode {
^
C:\Users\user\AppData\Local\Arduino15\packages\arduino\hardware\mbed_nicla\3.5.1\libraries\Nicla_System\src/RGBled.h:91:14: error: expected unqualified-id before numeric constant
#define Mode 1
^
C:\Users\user\AppData\Local\Arduino15\packages\arduino\hardware\mbed_nicla\3.5.1\cores\arduino/mbed/drivers/include/drivers/interfaces/InterfaceCAN.h:150:10: note: in expansion of macro 'Mode'
enum Mode {
^
C:\Users\user\AppData\Local\Arduino15\packages\arduino\hardware\mbed_nicla\3.5.1\libraries\Nicla_System\src/RGBled.h:91:14: error: expected identifier before numeric constant
#define Mode 1
^
C:\Users\user\AppData\Local\Arduino15\packages\arduino\hardware\mbed_nicla\3.5.1\cores\arduino/mbed/drivers/include/drivers/CAN.h:171:14: note: in expansion of macro 'Mode'
int mode(Mode mode);
^
C:\Users\user\AppData\Local\Arduino15\packages\arduino\hardware\mbed_nicla\3.5.1\libraries\Nicla_System\src/RGBled.h:91:14: error: expected ',' or '...' before numeric constant
#define Mode 1
^
C:\Users\user\AppData\Local\Arduino15\packages\arduino\hardware\mbed_nicla\3.5.1\cores\arduino/mbed/drivers/include/drivers/CAN.h:171:14: note: in expansion of macro 'Mode'
int mode(Mode mode);
^
exit status 1
Compilation error: exit status 1