diff --git a/cores/arduino/Arduino.h b/cores/arduino/Arduino.h
index 1f02a58c..83017230 100644
--- a/cores/arduino/Arduino.h
+++ b/cores/arduino/Arduino.h
@@ -90,6 +90,7 @@ extern const uint8_t digital_pin_to_port[];
 extern const uint8_t digital_pin_to_bit_mask[];
 extern const uint8_t digital_pin_to_bit_position[];
 extern const uint8_t digital_pin_to_timer[];
+extern const uint8_t analog_pin_to_channel[];
 
 // Get the bit location within the hardware port of the given virtual pin.
 // This comes from the pins_*.c file for the active board configuration.
@@ -155,5 +156,12 @@ bool isDoubleBondedActive(uint8_t pin);
 
 #endif
 
+#ifdef __cplusplus
+extern "C" {
+#endif
 #include "pins_arduino.h"
+#ifdef __cplusplus
+} // extern "C"
+#endif
+
 #endif
diff --git a/cores/arduino/UART.h b/cores/arduino/UART.h
index 574f0c35..5de83d17 100644
--- a/cores/arduino/UART.h
+++ b/cores/arduino/UART.h
@@ -27,6 +27,8 @@
 #include "api/HardwareSerial.h"
 #include "pins_arduino.h"
 
+using namespace arduino;
+
 // Define constants and variables for buffering incoming serial data.  We're
 // using a ring buffer (I think), in which head is the index of the location
 // to which to write the next incoming character and tail is the index of the
diff --git a/cores/arduino/WInterrupts.c b/cores/arduino/WInterrupts.cpp
similarity index 87%
rename from cores/arduino/WInterrupts.c
rename to cores/arduino/WInterrupts.cpp
index 64cd9ae6..55155f4c 100644
--- a/cores/arduino/WInterrupts.c
+++ b/cores/arduino/WInterrupts.cpp
@@ -32,9 +32,10 @@
 
 #include "wiring_private.h"
 
-static volatile voidFuncPtr intFunc[EXTERNAL_NUM_INTERRUPTS];
+static volatile voidFuncPtrParam intFunc[EXTERNAL_NUM_INTERRUPTS];
+static void* args[EXTERNAL_NUM_INTERRUPTS];
 
-void attachInterrupt(uint8_t pin, void (*userFunc)(void), PinStatus mode) {
+void attachInterruptParam(pin_size_t pin, void (*userFunc)(void*), PinStatus mode, void* params) {
 
   /* Get bit position and check pin validity */
   uint8_t bit_pos = digitalPinToBitPosition(pin);
@@ -46,24 +47,27 @@ void attachInterrupt(uint8_t pin, void (*userFunc)(void), PinStatus mode) {
   /* Check interrupt number and apply function pointer to correct array index */
   if(interruptNum < EXTERNAL_NUM_INTERRUPTS) {
     intFunc[interruptNum] = userFunc;
+    args[interruptNum] = params;
 
     // Configure the interrupt mode (trigger on low input, any change, rising
     // edge, or falling edge).  The mode constants were chosen to correspond
     // to the configuration bits in the hardware register, so we simply apply
     // the setting in the pin control register
 
+	int isc_mode;
+
     switch (mode) {
       case CHANGE:
-        mode = PORT_ISC_BOTHEDGES_gc;
+        isc_mode = PORT_ISC_BOTHEDGES_gc;
         break;
       case FALLING:
-        mode = PORT_ISC_FALLING_gc;
+        isc_mode = PORT_ISC_FALLING_gc;
         break;
       case RISING:
-        mode = PORT_ISC_RISING_gc;
+        isc_mode = PORT_ISC_RISING_gc;
         break;
       case LOW:
-        mode = PORT_ISC_LEVEL_gc;
+        isc_mode = PORT_ISC_LEVEL_gc;
         break;
       default:
         // AVR doesn't support level triggered interrupts
@@ -80,10 +84,14 @@ void attachInterrupt(uint8_t pin, void (*userFunc)(void), PinStatus mode) {
     *pin_ctrl_reg &= ~(PORT_ISC_gm);
 
     /* Apply ISC setting */
-    *pin_ctrl_reg |= mode;
+    *pin_ctrl_reg |= isc_mode;
   }
 }
 
+void attachInterrupt(uint8_t pin, void (*userFunc)(void), PinStatus mode) {
+  attachInterruptParam(pin, (voidFuncPtrParam)userFunc, mode, NULL);
+}
+
 void detachInterrupt(uint8_t pin) {
   /* Get bit position and check pin validity */
   uint8_t bit_pos = digitalPinToBitPosition(pin);
@@ -127,7 +135,7 @@ static void port_interrupt_handler(uint8_t port) {
       if(intFunc[interrupt_num] != 0){
 
         /* Call function */
-        intFunc[interrupt_num]();
+        intFunc[interrupt_num](args[interrupt_num]);
       }
     }
     bit_pos++;
diff --git a/cores/arduino/wiring_analog.c b/cores/arduino/wiring_analog.c
index c5a715b5..cda2b4da 100644
--- a/cores/arduino/wiring_analog.c
+++ b/cores/arduino/wiring_analog.c
@@ -23,7 +23,6 @@
 */
 
 #include "wiring_private.h"
-#include "pins_arduino.h"
 #include "Arduino.h"
 
 uint8_t analog_reference = DEFAULT;
diff --git a/libraries/SPI/src/SPI.cpp b/libraries/SPI/src/SPI.cpp
index 48a8a74c..d2c94f1c 100644
--- a/libraries/SPI/src/SPI.cpp
+++ b/libraries/SPI/src/SPI.cpp
@@ -24,8 +24,6 @@
 #define SPI_IMODE_EXTINT 1
 #define SPI_IMODE_GLOBAL 2
 
-const SPISettings DEFAULT_SPI_SETTINGS = SPISettings();
-
 SPIClass::SPIClass(uint8_t uc_pinMISO, uint8_t uc_pinSCK, uint8_t uc_pinMOSI, uint8_t uc_pinSS, uint8_t uc_mux)
 {
   initialized = false;
@@ -66,7 +64,7 @@ void SPIClass::init()
   initialized = true;
 }
 
-void SPIClass::config(SPISettings settings)
+void SPIClass::config(SPISettingsMegaAVR settings)
 {
   SPI0.CTRLA = settings.ctrla;
   SPI0.CTRLB = settings.ctrlb;
@@ -173,7 +171,7 @@ void SPIClass::reattachMaskedInterrupts() {
   }
 }
 
-void SPIClass::beginTransaction(SPISettings settings)
+void SPIClass::beginTransaction(SPISettingsMegaAVR settings)
 {
   if (interruptMode != SPI_IMODE_NONE)
   {
diff --git a/libraries/SPI/src/SPI.h b/libraries/SPI/src/SPI.h
index 18262c9d..38fbfb1b 100644
--- a/libraries/SPI/src/SPI.h
+++ b/libraries/SPI/src/SPI.h
@@ -31,7 +31,7 @@
 //   - endTransaction()
 //   - usingInterrupt()
 //   - SPISetting(clock, bitOrder, dataMode)
-#define SPI_HAS_TRANSACTION 1
+// #define SPI_HAS_TRANSACTION 1
 
 // SPI_HAS_NOTUSINGINTERRUPT means that SPI has notUsingInterrupt() method
 #define SPI_HAS_NOTUSINGINTERRUPT 1
@@ -52,9 +52,9 @@
 #define EXTERNAL_NUM_INTERRUPTS   NUM_TOTAL_PINS
 #endif
 
-class SPISettings {
+class SPISettingsMegaAVR : public arduino::SPISettings {
   public:
-  SPISettings(uint32_t clock, BitOrder bitOrder, uint8_t dataMode) {
+  SPISettingsMegaAVR(uint32_t clock, BitOrder bitOrder, uint8_t dataMode) {
     if (__builtin_constant_p(clock)) {
       init_AlwaysInline(clock, bitOrder, dataMode);
     } else {
@@ -63,7 +63,9 @@ class SPISettings {
   }
 
   // Default speed set to 4MHz, SPI mode set to MODE 0 and Bit order set to MSB first.
-  SPISettings() { init_AlwaysInline(4000000, MSBFIRST, SPI_MODE0); }
+  SPISettingsMegaAVR() { init_AlwaysInline(4000000, MSBFIRST, SPI_MODE0); }
+
+  SPISettingsMegaAVR(SPISettings& x) { SPISettingsMegaAVR(x.getClockFreq(), x.getBitOrder(), x.getDataMode()); }
 
   private:
   void init_MightInline(uint32_t clock, BitOrder bitOrder, uint8_t dataMode) {
@@ -142,12 +144,12 @@ class SPISettings {
   /* member variables containing the desired SPI settings */
   uint8_t ctrla;
   uint8_t ctrlb;
-  friend class SPIClass;
+  friend class SPIClassMegaAVR;
 };
 
-class SPIClass {
+class SPIClassMegaAVR : public arduino::HardwareSPI {
   public:
-  SPIClass(uint8_t uc_pinMISO, uint8_t uc_pinSCK, uint8_t uc_pinMOSI, uint8_t uc_pinSS, uint8_t uc_mux);
+  SPIClassMegaAVR(uint8_t uc_pinMISO, uint8_t uc_pinSCK, uint8_t uc_pinMOSI, uint8_t uc_pinSS, uint8_t uc_mux);
 
   byte transfer(uint8_t data);
   uint16_t transfer16(uint16_t data);
@@ -156,7 +158,10 @@ class SPIClass {
   // Transaction Functions
   void usingInterrupt(int interruptNumber);
   void notUsingInterrupt(int interruptNumber);
-  void beginTransaction(SPISettings settings);
+  void beginTransaction(SPISettingsMegaAVR settings);
+  void beginTransaction(SPISettings settings) {
+    beginTransaction(SPISettingsMegaAVR(settings));
+  }
   void endTransaction(void);
 
   void begin();
@@ -169,13 +174,16 @@ class SPIClass {
   private:
 
   void init();
-  void config(SPISettings settings);
+  void config(SPISettingsMegaAVR settings);
+  void config(SPISettings settings) {
+    config(SPISettingsMegaAVR(settings));
+  }
 
   // These undocumented functions should not be used.  SPI.transfer()
   // polls the hardware flag which is automatically cleared as the
   // AVR responds to SPI's interrupt
-  inline static void attachInterrupt() { SPI0.INTCTRL |= (SPI_IE_bm); }
-  inline static void detachInterrupt() { SPI0.INTCTRL &= ~(SPI_IE_bm); }
+  inline void attachInterrupt() { SPI0.INTCTRL |= (SPI_IE_bm); }
+  inline void detachInterrupt() { SPI0.INTCTRL &= ~(SPI_IE_bm); }
 
   void detachMaskedInterrupts();
   void reattachMaskedInterrupts();
@@ -199,6 +207,7 @@ class SPIClass {
   #endif
 };
 
+#define SPIClass SPIClassMegaAVR
 
 #if SPI_INTERFACES_COUNT > 0
   extern SPIClass SPI;
diff --git a/variants/nona4809/pins_arduino.h b/variants/nona4809/pins_arduino.h
index 39c3794f..589dc2ae 100644
--- a/variants/nona4809/pins_arduino.h
+++ b/variants/nona4809/pins_arduino.h
@@ -273,7 +273,6 @@ const uint8_t analog_pin_to_channel[] = {
 
 #endif
 
-extern const uint8_t analog_pin_to_channel[];
 #define digitalPinToAnalogInput(p)  ((p < ANALOG_INPUT_OFFSET) ? analog_pin_to_channel[p] : analog_pin_to_channel[p - ANALOG_INPUT_OFFSET] )
 
 // These serial port names are intended to allow libraries and architecture-neutral

<!DOCTYPE html PUBLIC '-//W3C//DTD XHTML 1.0 Transitional//EN' 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd'>
<html xmlns='http://www.w3.org/1999/xhtml'>
<head>
<title>pFad - Phonifier reborn</title>
<meta http-equiv='Content-Type' content='text/html; charset=utf-8' />
</head>
<body>
<h1>Pfad - The Proxy pFad of &#169; 2024 Garber Painting. All rights reserved.</h1>


<!-- Disclaimer -->
<p>Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.</p>
<br>
<p>Alternative Proxies:</p><p><a href="http://rainy.clevelandohioweatherforecast.com/php-proxy/index.php?q=https://github.com/arduino/ArduinoCore-megaavr/compare/master...namespaced_api.diff" target="_blank">Alternative Proxy</a></p><p><a href="http://rainy.clevelandohioweatherforecast.com/pFad/index.php?u=https://github.com/arduino/ArduinoCore-megaavr/compare/master...namespaced_api.diff" target="_blank">pFad Proxy</a></p><p><a href="http://rainy.clevelandohioweatherforecast.com/pFad/v3index.php?u=https://github.com/arduino/ArduinoCore-megaavr/compare/master...namespaced_api.diff" target="_blank">pFad v3 Proxy</a></p><p><a href="http://rainy.clevelandohioweatherforecast.com/pFad/v4index.php?u=https://github.com/arduino/ArduinoCore-megaavr/compare/master...namespaced_api.diff" target="_blank">pFad v4 Proxy</a></p></body>
</html>