diff --git a/variants/arduino_mzero/variant.cpp b/variants/arduino_mzero/variant.cpp
index e7adf3566..cb132ed6a 100644
--- a/variants/arduino_mzero/variant.cpp
+++ b/variants/arduino_mzero/variant.cpp
@@ -212,12 +212,12 @@ SERCOM sercom5( SERCOM5 ) ;
Uart Serial1( &sercom0, PIN_SERIAL1_RX, PIN_SERIAL1_TX, PAD_SERIAL1_RX, PAD_SERIAL1_TX ) ;
Uart Serial( &sercom5, PIN_SERIAL_RX, PIN_SERIAL_TX, PAD_SERIAL_RX, PAD_SERIAL_TX ) ;
-void SERCOM0_Handler()
+__attribute__((weak)) void SERCOM0_Handler()
{
Serial1.IrqHandler();
}
-void SERCOM5_Handler()
+__attribute__((weak)) void SERCOM5_Handler()
{
Serial.IrqHandler();
}
diff --git a/variants/arduino_zero/variant.cpp b/variants/arduino_zero/variant.cpp
index 2bc8b4a4e..70137491d 100644
--- a/variants/arduino_zero/variant.cpp
+++ b/variants/arduino_zero/variant.cpp
@@ -221,12 +221,12 @@ SERCOM sercom5( SERCOM5 ) ;
Uart Serial1( &sercom0, PIN_SERIAL1_RX, PIN_SERIAL1_TX, PAD_SERIAL1_RX, PAD_SERIAL1_TX ) ;
Uart Serial( &sercom5, PIN_SERIAL_RX, PIN_SERIAL_TX, PAD_SERIAL_RX, PAD_SERIAL_TX ) ;
-void SERCOM0_Handler()
+__attribute__((weak)) void SERCOM0_Handler()
{
Serial1.IrqHandler();
}
-void SERCOM5_Handler()
+__attribute__((weak)) void SERCOM5_Handler()
{
Serial.IrqHandler();
}
diff --git a/variants/circuitplay/variant.cpp b/variants/circuitplay/variant.cpp
index d9e7b9017..afd3d1df5 100644
--- a/variants/circuitplay/variant.cpp
+++ b/variants/circuitplay/variant.cpp
@@ -149,7 +149,7 @@ const PinDescription g_APinDescription[]=
{ PORTA, 11, PIO_ANALOG, (PIN_ATTR_DIGITAL|PIN_ATTR_ANALOG), ADC_Channel19, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_11 }, // A8 / Light Sensor
{ PORTA, 9, PIO_ANALOG, (PIN_ATTR_DIGITAL|PIN_ATTR_PWM|PIN_ATTR_TIMER|PIN_ATTR_ANALOG), ADC_Channel17, PWM0_CH1, TCC0_CH1, EXTERNAL_INT_9 }, // A9 / Thermistor
{ PORTA, 4, PIO_ANALOG, (PIN_ATTR_DIGITAL|PIN_ATTR_ANALOG), ADC_Channel4, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_4 }, // A10 Proximity
-
+
// GPIO 25 / IR Transmit
{ PORTA, 23, PIO_DIGITAL, (PIN_ATTR_DIGITAL|PIN_ATTR_PWM|PIN_ATTR_TIMER), No_ADC_Channel, PWM4_CH1, TC4_CH1, EXTERNAL_INT_7 }, // GPIO D25 - IR Transmitter
// GPIO 26 / IR Remote in
@@ -177,7 +177,7 @@ const PinDescription g_APinDescription[]=
// 36..38 - USB
- // --------------------
+ // --------------------
{ PORTA, 22, PIO_SERCOM, PIN_ATTR_NONE, No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // GPIO 29 - Host USB (not used)
{ PORTA, 24, PIO_COM, PIN_ATTR_NONE, No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // USB/DM
{ PORTA, 25, PIO_COM, PIN_ATTR_NONE, No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // USB/DP
@@ -202,7 +202,7 @@ SERCOM sercom5( SERCOM5 ) ;
Uart Serial1( &sercom4, PIN_SERIAL1_RX, PIN_SERIAL1_TX, PAD_SERIAL1_RX, PAD_SERIAL1_TX ) ;
-void SERCOM4_Handler()
+__attribute__((weak)) void SERCOM4_Handler()
{
Serial1.IrqHandler();
}
diff --git a/variants/mkr1000/variant.cpp b/variants/mkr1000/variant.cpp
index 79c2d8e0e..335006613 100644
--- a/variants/mkr1000/variant.cpp
+++ b/variants/mkr1000/variant.cpp
@@ -179,7 +179,7 @@ SERCOM sercom5(SERCOM5);
// Serial1
Uart Serial1(&sercom5, PIN_SERIAL1_RX, PIN_SERIAL1_TX, PAD_SERIAL1_RX, PAD_SERIAL1_TX);
-void SERCOM5_Handler()
+__attribute__((weak)) void SERCOM5_Handler()
{
Serial1.IrqHandler();
}
diff --git a/variants/mkrfox1200/variant.cpp b/variants/mkrfox1200/variant.cpp
index 2c55ed00c..8a318fbf3 100644
--- a/variants/mkrfox1200/variant.cpp
+++ b/variants/mkrfox1200/variant.cpp
@@ -149,7 +149,7 @@ const PinDescription g_APinDescription[] = {
{ PORTA, 14, PIO_DIGITAL, (PIN_ATTR_NONE ), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // SS: as GPIO
{ PORTA, 15, PIO_SERCOM_ALT, (PIN_ATTR_NONE ), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // MISO: SERCOM4/PAD[3]
{ PORTA, 27, PIO_DIGITAL, (PIN_ATTR_NONE ), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE },
-
+
{ PORTA, 28, PIO_DIGITAL, (PIN_ATTR_NONE ), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE },
{ PORTB, 8, PIO_ANALOG, (PIN_ATTR_DIGITAL|PIN_ATTR_ANALOG ), ADC_Channel2, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE },
{ PORTB, 9, PIO_ANALOG, (PIN_ATTR_PWM|PIN_ATTR_TIMER ), ADC_Channel3, PWM4_CH1, TC4_CH1, EXTERNAL_INT_9 },
@@ -177,7 +177,7 @@ SERCOM sercom5(SERCOM5);
// Serial1
Uart Serial1(&sercom5, PIN_SERIAL1_RX, PIN_SERIAL1_TX, PAD_SERIAL1_RX, PAD_SERIAL1_TX);
-void SERCOM5_Handler()
+__attribute__((weak)) void SERCOM5_Handler()
{
Serial1.IrqHandler();
}
diff --git a/variants/mkrgsm1400/variant.cpp b/variants/mkrgsm1400/variant.cpp
index 2b25934b2..6bd3049dc 100644
--- a/variants/mkrgsm1400/variant.cpp
+++ b/variants/mkrgsm1400/variant.cpp
@@ -151,7 +151,7 @@ const PinDescription g_APinDescription[] = {
{ PORTA, 14, PIO_SERCOM_ALT, (PIN_ATTR_DIGITAL ), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // SS: as GPIO
{ PORTA, 15, PIO_SERCOM_ALT, (PIN_ATTR_DIGITAL ), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // MISO: SERCOM4/PAD[3]
{ PORTA, 27, PIO_DIGITAL, (PIN_ATTR_NONE ), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_15 },
-
+
{ PORTB, 8, PIO_DIGITAL, (PIN_ATTR_DIGITAL|PIN_ATTR_ANALOG ), ADC_Channel2, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE },
{ PORTB, 9, PIO_ANALOG, (PIN_ATTR_PWM|PIN_ATTR_TIMER ), ADC_Channel3, PWM4_CH1, TC4_CH1, EXTERNAL_INT_9 },
@@ -261,7 +261,7 @@ void initVariant() {
// Serial1
Uart Serial1(&sercom5, PIN_SERIAL1_RX, PIN_SERIAL1_TX, PAD_SERIAL1_RX, PAD_SERIAL1_TX);
-void SERCOM5_Handler()
+__attribute__((weak)) void SERCOM5_Handler()
{
Serial1.IrqHandler();
}
@@ -269,7 +269,7 @@ void SERCOM5_Handler()
// SerialGSM
Uart Serial2(&sercom4, PIN_SERIAL2_RX, PIN_SERIAL2_TX, PAD_SERIAL2_RX, PAD_SERIAL2_TX, PIN_SERIAL2_RTS, PIN_SERIAL2_CTS);
-void SERCOM4_Handler()
+__attribute__((weak)) void SERCOM4_Handler()
{
Serial2.IrqHandler();
}
diff --git a/variants/mkrnb1500/variant.cpp b/variants/mkrnb1500/variant.cpp
index 5e61669e5..f1e471ec0 100644
--- a/variants/mkrnb1500/variant.cpp
+++ b/variants/mkrnb1500/variant.cpp
@@ -151,7 +151,7 @@ const PinDescription g_APinDescription[] = {
{ PORTA, 14, PIO_SERCOM_ALT, (PIN_ATTR_DIGITAL ), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // SS: as GPIO
{ PORTA, 15, PIO_SERCOM_ALT, (PIN_ATTR_DIGITAL ), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // MISO: SERCOM4/PAD[3]
{ PORTA, 27, PIO_DIGITAL, (PIN_ATTR_NONE ), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_15 },
-
+
{ PORTB, 8, PIO_DIGITAL, (PIN_ATTR_DIGITAL|PIN_ATTR_ANALOG ), ADC_Channel2, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE },
{ PORTB, 9, PIO_ANALOG, (PIN_ATTR_PWM|PIN_ATTR_TIMER ), ADC_Channel3, PWM4_CH1, TC4_CH1, EXTERNAL_INT_9 },
@@ -265,7 +265,7 @@ void initVariant() {
// Serial1
Uart Serial1(&sercom5, PIN_SERIAL1_RX, PIN_SERIAL1_TX, PAD_SERIAL1_RX, PAD_SERIAL1_TX);
-void SERCOM5_Handler()
+__attribute__((weak)) void SERCOM5_Handler()
{
Serial1.IrqHandler();
}
@@ -273,7 +273,7 @@ void SERCOM5_Handler()
// SerialSARA
Uart Serial2(&sercom4, PIN_SERIAL2_RX, PIN_SERIAL2_TX, PAD_SERIAL2_RX, PAD_SERIAL2_TX);
-void SERCOM4_Handler()
+__attribute__((weak)) void SERCOM4_Handler()
{
Serial2.IrqHandler();
}
diff --git a/variants/mkrvidor4000/variant.cpp b/variants/mkrvidor4000/variant.cpp
index 3a4ece488..b5b32e20b 100644
--- a/variants/mkrvidor4000/variant.cpp
+++ b/variants/mkrvidor4000/variant.cpp
@@ -151,7 +151,7 @@ const PinDescription g_APinDescription[] = {
{ PORTA, 14, PIO_DIGITAL, (PIN_ATTR_DIGITAL ), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // SS: as GPIO
{ PORTA, 15, PIO_SERCOM, (PIN_ATTR_DIGITAL ), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // MISO: SERCOM2/PAD[3]
{ PORTA, 27, PIO_DIGITAL, (PIN_ATTR_NONE ), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE },
-
+
{ PORTA, 28, PIO_DIGITAL, (PIN_ATTR_DIGITAL ), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE },
{ PORTB, 8, PIO_DIGITAL, (PIN_ATTR_DIGITAL ), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE },
{ PORTB, 9, PIO_DIGITAL, (PIN_ATTR_DIGITAL|PIN_ATTR_PWM|PIN_ATTR_TIMER ), ADC_Channel3, PWM4_CH1, TC4_CH1, EXTERNAL_INT_9 },
@@ -251,7 +251,7 @@ SERCOM sercom5(SERCOM5);
// Serial1
Uart Serial1(&sercom5, PIN_SERIAL1_RX, PIN_SERIAL1_TX, PAD_SERIAL1_RX, PAD_SERIAL1_TX);
-void SERCOM5_Handler()
+__attribute__((weak)) void SERCOM5_Handler()
{
Serial1.IrqHandler();
}
diff --git a/variants/mkrwan1300/variant.cpp b/variants/mkrwan1300/variant.cpp
index 8e07454fb..fc23d9f6c 100644
--- a/variants/mkrwan1300/variant.cpp
+++ b/variants/mkrwan1300/variant.cpp
@@ -153,7 +153,7 @@ const PinDescription g_APinDescription[] = {
{ PORTA, 14, PIO_DIGITAL, (PIN_ATTR_NONE ), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // SS: as GPIO
{ PORTA, 15, PIO_SERCOM_ALT, (PIN_ATTR_NONE ), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // MISO: SERCOM4/PAD[3]
{ PORTA, 27, PIO_DIGITAL, (PIN_ATTR_NONE ), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE },
-
+
{ PORTA, 28, PIO_DIGITAL, (PIN_ATTR_NONE ), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_8 },
{ PORTB, 8, PIO_ANALOG, (PIN_ATTR_DIGITAL|PIN_ATTR_ANALOG ), ADC_Channel2, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE },
{ PORTB, 9, PIO_DIGITAL, (PIN_ATTR_PWM|PIN_ATTR_TIMER ), ADC_Channel3, PWM4_CH1, TC4_CH1, EXTERNAL_INT_9 },
@@ -267,7 +267,7 @@ SERCOM sercom5(SERCOM5);
// Serial1
Uart Serial1(&sercom5, PIN_SERIAL1_RX, PIN_SERIAL1_TX, PAD_SERIAL1_RX, PAD_SERIAL1_TX);
-void SERCOM5_Handler()
+__attribute__((weak)) void SERCOM5_Handler()
{
Serial1.IrqHandler();
}
@@ -275,7 +275,7 @@ void SERCOM5_Handler()
// SerialLoRa
Uart Serial2(&sercom4, PIN_SERIAL2_RX, PIN_SERIAL2_TX, PAD_SERIAL2_RX, PAD_SERIAL2_TX);
-void SERCOM4_Handler()
+__attribute__((weak)) void SERCOM4_Handler()
{
Serial2.IrqHandler();
-}
\ No newline at end of file
+}
diff --git a/variants/mkrwifi1010/variant.cpp b/variants/mkrwifi1010/variant.cpp
index eb146fa59..23ed940c4 100644
--- a/variants/mkrwifi1010/variant.cpp
+++ b/variants/mkrwifi1010/variant.cpp
@@ -151,7 +151,7 @@ const PinDescription g_APinDescription[] = {
{ PORTA, 14, PIO_DIGITAL, (PIN_ATTR_NONE ), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // SS: as GPIO
{ PORTA, 15, PIO_SERCOM_ALT, (PIN_ATTR_NONE ), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE }, // MISO: SERCOM4/PAD[3]
{ PORTA, 27, PIO_DIGITAL, (PIN_ATTR_NONE ), No_ADC_Channel, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_15 },
-
+
{ PORTB, 8, PIO_DIGITAL, (PIN_ATTR_DIGITAL|PIN_ATTR_ANALOG ), ADC_Channel2, NOT_ON_PWM, NOT_ON_TIMER, EXTERNAL_INT_NONE },
{ PORTB, 9, PIO_ANALOG, (PIN_ATTR_PWM|PIN_ATTR_TIMER ), ADC_Channel3, PWM4_CH1, TC4_CH1, EXTERNAL_INT_9 },
@@ -244,7 +244,7 @@ void initVariant() {
// Serial1
Uart Serial1(&sercom5, PIN_SERIAL1_RX, PIN_SERIAL1_TX, PAD_SERIAL1_RX, PAD_SERIAL1_TX);
-void SERCOM5_Handler()
+__attribute__((weak)) void SERCOM5_Handler()
{
Serial1.IrqHandler();
}
@@ -252,7 +252,7 @@ void SERCOM5_Handler()
// Serial2
Uart Serial2(&sercom4, PIN_SERIAL2_RX, PIN_SERIAL2_TX, PAD_SERIAL2_RX, PAD_SERIAL2_TX, PIN_SERIAL2_RTS, PIN_SERIAL2_CTS);
-void SERCOM4_Handler()
+__attribute__((weak)) void SERCOM4_Handler()
{
Serial2.IrqHandler();
}
diff --git a/variants/nano_33_iot/variant.cpp b/variants/nano_33_iot/variant.cpp
index 82c5b9e52..627179eee 100644
--- a/variants/nano_33_iot/variant.cpp
+++ b/variants/nano_33_iot/variant.cpp
@@ -194,14 +194,14 @@ void SERCOM5_Handler()
Uart Serial2(&sercom3, PIN_SERIAL2_RX, PIN_SERIAL2_TX, PAD_SERIAL2_RX, PAD_SERIAL2_TX);
-void SERCOM3_Handler()
+__attribute__((weak)) void SERCOM3_Handler()
{
Serial2.IrqHandler();
}
Uart SerialHCI(&sercom2, PIN_SERIALHCI_RX, PIN_SERIALHCI_TX, PAD_SERIALHCI_RX, PAD_SERIALHCI_TX, PIN_SERIALHCI_RTS, PIN_SERIALHCI_CTS);
-void SERCOM2_Handler()
+__attribute__((weak)) void SERCOM2_Handler()
{
SerialHCI.IrqHandler();
}
pFad - Phonifier reborn
Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.
Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.
Alternative Proxies:
Alternative Proxy
pFad Proxy
pFad v3 Proxy
pFad v4 Proxy