From 719d9c64725534709437e7a09577252e3d69532d Mon Sep 17 00:00:00 2001 From: per1234 Date: Sat, 27 Nov 2021 22:20:09 -0800 Subject: [PATCH] Remove programmer properties from openocd upload pattern Platform properties may be associated with a specific programmer selection in the programmers.txt configuration file. These properties can be used in the platform.txt patterns for the actions that use the programmer: - `program` - `erase` - `bootloader` However, those properties are not expanded in the `upload` pattern, since it does not use the programmer: https://arduino.github.io/arduino-cli/dev/platform-specification/#programmerstxt > These properties can only be used in the recipes of the actions that use the programmer (erase, bootloader, and program). While enhancing the ability to make programmer-specific configuration of the patterns, programmer-associated properties were introduced into `tools.openocd.upload.pattern`, which caused uploads to fail for the "Arduino Zero (Programming Port)" board: ``` Unexpected command line argument: {extra_params} ``` The upload pattern is hereby reverted to the previous working configuration, leaving the beneficial changes to the other patterns. --- platform.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/platform.txt b/platform.txt index 520c2eb08..927c1e826 100644 --- a/platform.txt +++ b/platform.txt @@ -202,7 +202,7 @@ tools.openocd.cmd.windows=bin/openocd.exe tools.openocd.upload.params.verbose=-d2 tools.openocd.upload.params.quiet=-d0 -tools.openocd.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "interface/{protocol}" -c "set telnet_port 0" {extra_params} -f "target/at91samdXX.cfg" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset 0x2000; shutdown" +tools.openocd.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset 0x2000; shutdown" # the following rule is deprecated by pluggable discovery tools.openocd.upload.network_pattern={tools.arduino_ota.cmd} -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b pFad - Phonifier reborn

Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.

Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.


Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy