Merge pull request arduino-libraries#134 from polldo/example-enhanced-advertising

facchinm · web-flow · commit f2f73e869be8 · 2022-05-13T12:14:04.000+02:00
Add enhanced advertising examples
diff --git a/examples/Peripheral/Advertising/EnhancedAdvertising/EnhancedAdvertising.ino b/examples/Peripheral/Advertising/EnhancedAdvertising/EnhancedAdvertising.ino
@@ -0,0 +1,44 @@
+#include <ArduinoBLE.h>
+
+BLEService myService("fff0");
+BLEIntCharacteristic myCharacteristic("fff1", BLERead | BLEBroadcast);
+
+// Advertising parameters should have a global scope. Do NOT define them in 'setup' or in 'loop'
+const uint8_t manufactData[4] = {0x01, 0x02, 0x03, 0x04};
+const uint8_t serviceData[3] = {0x00, 0x01, 0x02};
+
+void setup() {
+  Serial.begin(9600);
+  while (!Serial);
+
+  if (!BLE.begin()) {
+    Serial.println("failed to initialize BLE!");
+    while (1);
+  }
+
+  myService.addCharacteristic(myCharacteristic);
+  BLE.addService(myService);
+
+  // Build scan response data packet
+  BLEAdvertisingData scanData;
+  // Set parameters for scan response packet
+  scanData.setLocalName("Test enhanced advertising");
+  // Copy set parameters in the actual scan response packet
+  BLE.setScanResponseData(scanData);
+
+  // Build advertising data packet
+  BLEAdvertisingData advData;
+  // Set parameters for advertising packet
+  advData.setManufacturerData(0x004C, manufactData, sizeof(manufactData));
+  advData.setAdvertisedService(myService);
+  advData.setAdvertisedServiceData(0xfff0, serviceData, sizeof(serviceData));
+  // Copy set parameters in the actual advertising packet
+  BLE.setAdvertisingData(advData);
+
+  BLE.advertise();
+  Serial.println("advertising ...");
+}
+
+void loop() {
+  BLE.poll();
+}
diff --git a/examples/Peripheral/Advertising/RawDataAdvertising/RawDataAdvertising.ino b/examples/Peripheral/Advertising/RawDataAdvertising/RawDataAdvertising.ino
@@ -0,0 +1,41 @@
+#include <ArduinoBLE.h>
+
+BLEService myService("fff0");
+BLEIntCharacteristic myCharacteristic("fff1", BLERead | BLEBroadcast);
+
+// Advertising parameters should have a global scope. Do NOT define them in 'setup' or in 'loop'
+const uint8_t completeRawAdvertisingData[] = {0x02,0x01,0x06,0x09,0xff,0x01,0x01,0x00,0x01,0x02,0x03,0x04,0x05};   
+
+void setup() {
+  Serial.begin(9600);
+  while (!Serial);
+
+  if (!BLE.begin()) {
+    Serial.println("failed to initialize BLE!");
+    while (1);
+  }
+
+  myService.addCharacteristic(myCharacteristic);
+  BLE.addService(myService);
+
+  // Build advertising data packet
+  BLEAdvertisingData advData;
+  // If a packet has a raw data parameter, then all the other parameters of the packet will be ignored
+  advData.setRawData(completeRawAdvertisingData, sizeof(completeRawAdvertisingData));  
+  // Copy set parameters in the actual advertising packet
+  BLE.setAdvertisingData(advData);
+
+  // Build scan response data packet
+  BLEAdvertisingData scanData;
+  scanData.setLocalName("Test advertising raw data");
+  // Copy set parameters in the actual scan response packet
+  BLE.setScanResponseData(scanData);
+  
+  BLE.advertise();
+
+  Serial.println("advertising ...");
+}
+
+void loop() {
+  BLE.poll();
+}
