Merge pull request adafruit#901 from tannewt/pulseio_too_fast

dhalbert · web-flow · commit b2d98edb4ed9 · 2018-06-08T17:59:06.000-04:00
Prevent freezing USB during high frequency PulseIn.
diff --git a/ports/atmel-samd/background.c b/ports/atmel-samd/background.c
@@ -26,11 +26,19 @@
 #include "background.h"
 
 #include "audio_dma.h"
+#include "tick.h"
 #include "usb.h"
 #include "usb_mass_storage.h"
 
+volatile uint64_t last_finished_tick = 0;
+
 void run_background_tasks(void) {
     audio_dma_background();
     usb_msc_background();
     usb_cdc_background();
+    last_finished_tick = ticks_ms;
+}
+
+bool background_tasks_ok(void) {
+    return ticks_ms - last_finished_tick < 1000;
 }
diff --git a/ports/atmel-samd/background.h b/ports/atmel-samd/background.h
@@ -27,6 +27,9 @@
 #ifndef MICROPY_INCLUDED_ATMEL_SAMD_BACKGROUND_H
 #define MICROPY_INCLUDED_ATMEL_SAMD_BACKGROUND_H
 
+#include <stdbool.h>
+
 void run_background_tasks(void);
+bool background_tasks_ok(void);
 
 #endif  // MICROPY_INCLUDED_ATMEL_SAMD_BACKGROUND_H
diff --git a/ports/atmel-samd/bindings/samd/Clock.c b/ports/atmel-samd/bindings/samd/Clock.c
@@ -47,15 +47,7 @@
 STATIC void samd_clock_print(const mp_print_t *print, mp_obj_t self_in, mp_print_kind_t kind) {
     samd_clock_obj_t *self = MP_OBJ_TO_PTR(self_in);
 
-    mp_printf(print, "%q.%q.%s(", MP_QSTR_samd, MP_QSTR_clock, self->name);
-    if (clock_get_enabled(self->type, self->index)) {
-        mp_printf(print, "frequency=%u", clock_get_frequency(self->type, self->index));
-        uint32_t calibration = clock_get_calibration(self->type, self->index);
-        if (calibration) {
-            mp_printf(print, ", calibration=%u", calibration);
-        }
-    }
-    mp_printf(print, ")");
+    mp_printf(print, "%q.%q.%q", MP_QSTR_samd, MP_QSTR_clock, self->name);
 }
 
 //|     .. attribute:: enabled
diff --git a/ports/atmel-samd/bindings/samd/Clock.h b/ports/atmel-samd/bindings/samd/Clock.h
@@ -31,39 +31,39 @@
 
 typedef struct {
     mp_obj_base_t base;
-    const char *name;
+    qstr name;
     uint8_t type;
     uint8_t index;
 } samd_clock_obj_t;
 
 #define CLOCK(_name, _type, _index) \
 const samd_clock_obj_t clock_ ## _name = { \
     { &samd_clock_type }, \
-    .name = #_name, \
+    .name = MP_QSTR_ ## _name, \
     .type = _type, \
     .index = _index, \
 }
 
 #define CLOCK_SOURCE(_name) \
 const samd_clock_obj_t clock_ ## _name = { \
     { &samd_clock_type }, \
-    .name = #_name, \
+    .name = MP_QSTR_ ## _name, \
     .type = 0, \
     .index = GCLK_SOURCE_ ## _name, \
 }
 
 #define CLOCK_GCLK(_name) \
 const samd_clock_obj_t clock_ ## _name = { \
     { &samd_clock_type }, \
-    .name = #_name, \
+    .name = MP_QSTR_ ## _name, \
     .type = 1, \
     .index = _name ## _GCLK_ID, \
 }
 
 #define CLOCK_GCLK_(_name, _extra) \
 const samd_clock_obj_t clock_ ## _name ## _ ## _extra = { \
     { &samd_clock_type }, \
-    .name = #_name "_" #_extra, \
+    .name = MP_QSTR_ ## _name ## _ ## _extra, \
     .type = 1, \
     .index = _name ## _GCLK_ID_ ## _extra, \
 }
diff --git a/ports/atmel-samd/boards/arduino_zero/mpconfigboard.h b/ports/atmel-samd/boards/arduino_zero/mpconfigboard.h
@@ -24,3 +24,7 @@
 
 #define DEFAULT_UART_BUS_RX (&pin_PA11)
 #define DEFAULT_UART_BUS_TX (&pin_PA10)
+
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1
diff --git a/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h b/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
@@ -68,3 +68,7 @@
 
 #define DEFAULT_UART_BUS_RX (&pin_PB09)
 #define DEFAULT_UART_BUS_TX (&pin_PB08)
+
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1
diff --git a/ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h b/ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
@@ -71,3 +71,7 @@
 
 #define DEFAULT_UART_BUS_RX (&pin_PB09)
 #define DEFAULT_UART_BUS_TX (&pin_PB08)
+
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1
diff --git a/ports/atmel-samd/boards/feather_m0_adalogger/mpconfigboard.h b/ports/atmel-samd/boards/feather_m0_adalogger/mpconfigboard.h
@@ -22,3 +22,7 @@
 
 #define DEFAULT_UART_BUS_RX (&pin_PA11)
 #define DEFAULT_UART_BUS_TX (&pin_PA10)
+
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1
diff --git a/ports/atmel-samd/boards/feather_m0_basic/mpconfigboard.h b/ports/atmel-samd/boards/feather_m0_basic/mpconfigboard.h
@@ -23,3 +23,7 @@
 
 #define DEFAULT_UART_BUS_RX (&pin_PA11)
 #define DEFAULT_UART_BUS_TX (&pin_PA10)
+
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1
diff --git a/ports/atmel-samd/boards/feather_m0_express/mpconfigboard.h b/ports/atmel-samd/boards/feather_m0_express/mpconfigboard.h
@@ -58,3 +58,7 @@
 
 #define DEFAULT_UART_BUS_RX (&pin_PA11)
 #define DEFAULT_UART_BUS_TX (&pin_PA10)
+
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1
diff --git a/ports/atmel-samd/boards/feather_m0_rfm69/mpconfigboard.h b/ports/atmel-samd/boards/feather_m0_rfm69/mpconfigboard.h
@@ -23,3 +23,7 @@
 
 #define DEFAULT_UART_BUS_RX (&pin_PA11)
 #define DEFAULT_UART_BUS_TX (&pin_PA10)
+
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1
diff --git a/ports/atmel-samd/boards/feather_m0_rfm9x/mpconfigboard.h b/ports/atmel-samd/boards/feather_m0_rfm9x/mpconfigboard.h
@@ -23,3 +23,7 @@
 
 #define DEFAULT_UART_BUS_RX (&pin_PA11)
 #define DEFAULT_UART_BUS_TX (&pin_PA10)
+
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1
diff --git a/ports/atmel-samd/boards/feather_m0_supersized/mpconfigboard.h b/ports/atmel-samd/boards/feather_m0_supersized/mpconfigboard.h
@@ -57,3 +57,7 @@
 
 #define DEFAULT_UART_BUS_RX (&pin_PA11)
 #define DEFAULT_UART_BUS_TX (&pin_PA10)
+
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1
diff --git a/ports/atmel-samd/boards/feather_m4_express/mpconfigboard.h b/ports/atmel-samd/boards/feather_m4_express/mpconfigboard.h
@@ -43,3 +43,7 @@
 
 #define DEFAULT_UART_BUS_RX (&pin_PB17)
 #define DEFAULT_UART_BUS_TX (&pin_PB16)
+
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1
diff --git a/ports/atmel-samd/boards/gemma_m0/mpconfigboard.h b/ports/atmel-samd/boards/gemma_m0/mpconfigboard.h
@@ -40,6 +40,9 @@
 #define IGNORE_PIN_PA20     1
 #define IGNORE_PIN_PA21     1
 #define IGNORE_PIN_PA22     1
+// USB is always used.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1
 #define IGNORE_PIN_PA27     1
 #define IGNORE_PIN_PA28     1
 #define IGNORE_PIN_PA30     1
diff --git a/ports/atmel-samd/boards/itsybitsy_m0_express/mpconfigboard.h b/ports/atmel-samd/boards/itsybitsy_m0_express/mpconfigboard.h
@@ -56,3 +56,7 @@
 
 #define DEFAULT_UART_BUS_RX (&pin_PA11)
 #define DEFAULT_UART_BUS_TX (&pin_PA10)
+
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1
diff --git a/ports/atmel-samd/boards/itsybitsy_m4_express/mpconfigboard.h b/ports/atmel-samd/boards/itsybitsy_m4_express/mpconfigboard.h
@@ -41,3 +41,7 @@
 
 #define DEFAULT_UART_BUS_RX (&pin_PA16)
 #define DEFAULT_UART_BUS_TX (&pin_PA17)
+
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1
diff --git a/ports/atmel-samd/boards/metro_m0_express/mpconfigboard.h b/ports/atmel-samd/boards/metro_m0_express/mpconfigboard.h
@@ -59,3 +59,7 @@
 
 #define DEFAULT_UART_BUS_RX (&pin_PA11)
 #define DEFAULT_UART_BUS_TX (&pin_PA10)
+
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1
diff --git a/ports/atmel-samd/boards/metro_m4_express/mpconfigboard.h b/ports/atmel-samd/boards/metro_m4_express/mpconfigboard.h
@@ -44,3 +44,7 @@
 
 #define DEFAULT_UART_BUS_RX (&pin_PA23)
 #define DEFAULT_UART_BUS_TX (&pin_PA22)
+
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1
diff --git a/ports/atmel-samd/boards/trinket_m0/mpconfigboard.h b/ports/atmel-samd/boards/trinket_m0/mpconfigboard.h
@@ -30,6 +30,9 @@
 #define IGNORE_PIN_PA21     1
 #define IGNORE_PIN_PA22     1
 #define IGNORE_PIN_PA23     1
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1
 #define IGNORE_PIN_PA27     1
 #define IGNORE_PIN_PA28     1
 #define IGNORE_PIN_PA30     1
diff --git a/ports/atmel-samd/boards/trinket_m0_haxpress/mpconfigboard.h b/ports/atmel-samd/boards/trinket_m0_haxpress/mpconfigboard.h
@@ -64,3 +64,7 @@
 
 #define DEFAULT_UART_BUS_RX (&pin_PA07)
 #define DEFAULT_UART_BUS_TX (&pin_PA06)
+
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1
diff --git a/ports/atmel-samd/boards/ugame10/mpconfigboard.h b/ports/atmel-samd/boards/ugame10/mpconfigboard.h
@@ -52,3 +52,7 @@
     { MP_OBJ_NEW_QSTR(MP_QSTR_audioio), (mp_obj_t)&audioio_module }, \
     { MP_OBJ_NEW_QSTR(MP_QSTR_gamepad),(mp_obj_t)&gamepad_module }, \
     { MP_OBJ_NEW_QSTR(MP_QSTR__stage), (mp_obj_t)&stage_module }
+
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1
diff --git a/ports/atmel-samd/common-hal/microcontroller/__init__.c b/ports/atmel-samd/common-hal/microcontroller/__init__.c
@@ -40,18 +40,10 @@ void common_hal_mcu_delay_us(uint32_t delay) {
     mp_hal_delay_us(delay);
 }
 
-// Interrupt flags that will be saved and restored during disable/Enable
-// interrupt functions below.
-
-// ASF4's interrupt disable doesn't handle duplicate calls
-volatile uint32_t interrupt_flags;
 volatile uint32_t nesting_count = 0;
 void common_hal_mcu_disable_interrupts(void) {
-    if (nesting_count == 0) {
-        interrupt_flags = __get_PRIMASK();
-        __disable_irq();
-        __DMB();
-    }
+    __disable_irq();
+    __DMB();
     nesting_count++;
 }
 
@@ -66,7 +58,7 @@ void common_hal_mcu_enable_interrupts(void) {
         return;
     }
     __DMB();
-    __set_PRIMASK(interrupt_flags);
+    __enable_irq();
 }
 
 extern uint32_t _ezero;
diff --git a/ports/atmel-samd/common-hal/pulseio/PulseIn.c b/ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -31,6 +31,7 @@
 #include "atmel_start_pins.h"
 #include "hal/include/hal_gpio.h"
 
+#include "background.h"
 #include "mpconfigport.h"
 #include "py/gc.h"
 #include "py/runtime.h"
@@ -60,10 +61,16 @@ void pulsein_interrupt_handler(uint8_t channel) {
     uint32_t current_us;
     uint64_t current_ms;
     current_tick(&current_ms, &current_us);
+
     // current_tick gives us the remaining us until the next tick but we want the number since the
     // last ms.
     current_us = 1000 - current_us;
     pulseio_pulsein_obj_t* self = get_eic_channel_data(channel);
+    if (!background_tasks_ok() || self->errored_too_fast) {
+        self->errored_too_fast = true;
+        common_hal_pulseio_pulsein_pause(self);
+        return;
+    }
     if (self->first_edge) {
         self->first_edge = false;
         pulsein_set_config(self, false);
@@ -118,6 +125,7 @@ void common_hal_pulseio_pulsein_construct(pulseio_pulsein_obj_t* self,
     self->first_edge = true;
     self->last_us = 0;
     self->last_ms = 0;
+    self->errored_too_fast = false;
 
     set_eic_channel_data(pin->extint_channel, (void*) self);
 
@@ -157,6 +165,9 @@ void common_hal_pulseio_pulsein_resume(pulseio_pulsein_obj_t* self,
     // Make sure we're paused.
     common_hal_pulseio_pulsein_pause(self);
 
+    // Reset erroring
+    self->errored_too_fast = false;
+
     // Send the trigger pulse.
     if (trigger_duration > 0) {
         gpio_set_pin_pull_mode(self->pin, GPIO_PULL_OFF);
@@ -207,6 +218,11 @@ uint16_t common_hal_pulseio_pulsein_get_len(pulseio_pulsein_obj_t* self) {
     return self->len;
 }
 
+bool common_hal_pulseio_pulsein_get_paused(pulseio_pulsein_obj_t* self) {
+    uint32_t mask = 1 << self->channel;
+    return (EIC->INTENSET.reg & (mask << EIC_INTENSET_EXTINT_Pos)) == 0;
+}
+
 uint16_t common_hal_pulseio_pulsein_get_item(pulseio_pulsein_obj_t* self,
         int16_t index) {
     common_hal_mcu_disable_interrupts();
diff --git a/ports/atmel-samd/common-hal/pulseio/PulseIn.h b/ports/atmel-samd/common-hal/pulseio/PulseIn.h
@@ -43,6 +43,7 @@ typedef struct {
     volatile bool first_edge;
     volatile uint64_t last_ms;
     volatile uint16_t last_us;
+    volatile bool errored_too_fast;
 } pulseio_pulsein_obj_t;
 
 void pulsein_reset(void);
diff --git a/ports/atmel-samd/peripherals/samd21/clocks.c b/ports/atmel-samd/peripherals/samd21/clocks.c
@@ -130,6 +130,9 @@ static void init_clock_source_dfll48m_xosc(void) {
                             SYSCTRL_DFLLCTRL_ENABLE;
     while (!SYSCTRL->PCLKSR.bit.DFLLRDY) {}
     while (GCLK->STATUS.bit.SYNCBUSY) {}
+
+    // Wait for the fine lock on the DFLL.
+    while (!SYSCTRL->PCLKSR.bit.DFLLLCKC || !SYSCTRL->PCLKSR.bit.DFLLLCKF) {}
 }
 
 static void init_clock_source_dfll48m_usb(void) {
diff --git a/ports/atmel-samd/tick.c b/ports/atmel-samd/tick.c
@@ -60,6 +60,22 @@ void tick_init() {
     uint32_t ticks_per_ms = common_hal_mcu_processor_get_frequency() / 1000;
     SysTick_Config(ticks_per_ms-1);
     NVIC_EnableIRQ(SysTick_IRQn);
+    // Set all peripheral interrupt priorities to the lowest priority by default.
+    for (uint16_t i = 0; i < PERIPH_COUNT_IRQn; i++) {
+        NVIC_SetPriority(i, (1UL << __NVIC_PRIO_BITS) - 1UL);
+    }
+    // Bump up the systick interrupt.
+    NVIC_SetPriority(SysTick_IRQn, 1);
+    #ifdef SAMD21
+    NVIC_SetPriority(USB_IRQn, 1);
+    #endif
+
+    #ifdef SAMD51
+    NVIC_SetPriority(USB_0_IRQn, 1);
+    NVIC_SetPriority(USB_1_IRQn, 1);
+    NVIC_SetPriority(USB_2_IRQn, 1);
+    NVIC_SetPriority(USB_3_IRQn, 1);
+    #endif
 }
 
 void tick_delay(uint32_t us) {
diff --git a/ports/nrf/common-hal/pulseio/PulseIn.c b/ports/nrf/common-hal/pulseio/PulseIn.c
@@ -71,6 +71,10 @@ uint16_t common_hal_pulseio_pulsein_get_maxlen(pulseio_pulsein_obj_t* self) {
     return 0xadaf;
 }
 
+bool common_hal_pulseio_pulsein_get_paused(pulseio_pulsein_obj_t* self) {
+    return true;
+}
+
 uint16_t common_hal_pulseio_pulsein_get_len(pulseio_pulsein_obj_t* self) {
     return 0xadaf;
 }
diff --git a/shared-bindings/pulseio/PulseIn.c b/shared-bindings/pulseio/PulseIn.c
diff --git a/shared-bindings/pulseio/PulseIn.h b/shared-bindings/pulseio/PulseIn.h
diff --git a/tools/chart_code_size.py b/tools/chart_code_size.py
