eloquentarduino
diff --git a/‎.DS_Store
0 Bytes b/‎.DS_Store
0 Bytes
diff --git a/‎examples/VL53L5CX/VL53L5cxSimpleCapture/VL53L5cxSimpleCapture.ino
Lines changed: 35 additions & 0 deletions b/‎examples/VL53L5CX/VL53L5cxSimpleCapture/VL53L5cxSimpleCapture.ino
Lines changed: 35 additions & 0 deletions
diff --git a/‎examples/VL53L5CX/VL53L5cxStreamCapture/VL53L5cxStreamCapture.ino
Lines changed: 41 additions & 0 deletions b/‎examples/VL53L5CX/VL53L5cxStreamCapture/VL53L5cxStreamCapture.ino
Lines changed: 41 additions & 0 deletions
diff --git a/‎src/eloquent.h
Lines changed: 1 addition & 0 deletions b/‎src/eloquent.h
Lines changed: 1 addition & 0 deletions
diff --git a/‎src/eloquent/.DS_Store
6 KB b/‎src/eloquent/.DS_Store
6 KB
diff --git a/‎src/eloquent/apps/telegram/witnessmenow/TelegramCertificate.h
Lines changed: 0 additions & 102 deletions b/‎src/eloquent/apps/telegram/witnessmenow/TelegramCertificate.h
Lines changed: 0 additions & 102 deletions
@@ -0,0 +1,35 @@
+/**
+ * Capture data from VL53L5CX 8x8 Time of Flight sensor
+ */
+#include <Wire.h>
+#include <eloquent.h>
+#include <eloquent/modules/vl53l5cx.h>
+
+
+
+void setup() {
+    Serial.begin(115200);
+    Wire.begin();
+
+    // turn on high speed communication
+    tof8x8.highFreq();
+
+    // truncate readings further than 2m to 2m
+    tof8x8.truncateAt(2000);
+
+    // you may optionally rescale to a given range
+    //tof8x8.setRange(0, 255);
+
+    if (!tof8x8.begin())
+        eloquent::abort(Serial, "vl53l5cx not found");
+
+    Serial.println("vl53l5cx is ok");
+}
+
+
+void loop() {
+    if (tof8x8.read()) {
+        tof8x8.printTo(Serial);
+        delay(100);
+    }
+}
@@ -0,0 +1,41 @@
+#include <Wire.h>
+#include <eloquent.h>
+#include <eloquent/modules/vl53l5cx/stream.h>
+
+#define RESOLUTION 8*8
+#define NUM_FRAMES 10
+
+
+Eloquent::Modules::VL53L5CXStream<RESOLUTION, NUM_FRAMES> stream;
+
+
+
+void setup() {
+    Serial.begin(115200);
+    Wire.begin();
+
+    // turn on high speed communication
+    stream.highFreq();
+
+    // truncate readings further than 2m to 2m
+    stream.truncateAt(2000);
+
+    // you may optionally rescale to a given range
+    //stream.setRange(0, 255);
+
+    // emit the "queue" event once every 2 frames
+    stream.throttle(2);
+
+    if (!stream.begin())
+        eloquent::abort(Serial, "vl53l5cx not found");
+
+    Serial.println("vl53l5cx is ok");
+}
+
+
+void loop() {
+    if (stream.queue()) {
+        stream.printTo(Serial);
+        delay(100);
+    }
+}
@@ -2,5 +2,6 @@
 #define ELOQUENTARDUINO_ELOQUENT_H
 
 // entry point for the Eloquent Arduino library
+#include "./eloquent/utils.h"
 
 #endif //ELOQUENTARDUINO_ELOQUENT_H