From 41af210479ce0f740c6d2be0a19bbf59128ae4e4 Mon Sep 17 00:00:00 2001 From: cclauss Date: Thu, 25 Oct 2018 15:53:50 +0200 Subject: [PATCH] Use print() function in both Python 2 and Python 3 --- PSL/SENSORS/Sx1276.py | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/PSL/SENSORS/Sx1276.py b/PSL/SENSORS/Sx1276.py index 022a3c76..63b74fd6 100644 --- a/PSL/SENSORS/Sx1276.py +++ b/PSL/SENSORS/Sx1276.py @@ -1,4 +1,6 @@ #Registers adapted from sample code for SEMTECH SX1276 +from __future__ import print_function + import time def connect(SPI,frq,**kwargs): @@ -70,7 +72,7 @@ def __init__(self,SPI,frq,**kwargs): self.reset() self.version = self.SPIRead(self.REG_VERSION,1)[0] if self.version!=0x12: - print 'version error',self.version + print('version error',self.version) self.sleep() self.setFrequency(self.frequency) @@ -110,7 +112,7 @@ def endPacket(self): while 1: #Wait for TX done if self.SPIRead(self.REG_IRQ_FLAGS,1)[0] & self.IRQ_TX_DONE_MASK: break else: - print ('wait...') + print('wait...') time.sleep(0.1) self.SPIWrite(self.REG_IRQ_FLAGS,[self.IRQ_TX_DONE_MASK]) @@ -210,19 +212,19 @@ def setTxPower(self,level,pin): elif level>17: level = 17 if level==17: - print ('max power output') + print('max power output') self.SPIWrite(self.REG_PA_DAC,[0x87]) else: self.SPIWrite(self.REG_PA_DAC,[0x84]) self.SPIWrite(self.REG_PA_CONFIG,[self.PA_BOOST|0x70|(level-2)]) - print 'power',hex(self.SPIRead(self.REG_PA_CONFIG)[0]) + print('power',hex(self.SPIRead(self.REG_PA_CONFIG)[0])) def setFrequency(self,frq): self._frequency = frq frf = (int(frq)<<19)/32000000 - print ('frf',frf) - print ('freq',(frf>>16)&0xFF,(frf>>8)&0xFF,(frf)&0xFF) + print('frf',frf) + print('freq',(frf>>16)&0xFF,(frf>>8)&0xFF,(frf)&0xFF) self.SPIWrite(self.REG_FRF_MSB,[(frf>>16)&0xFF]) self.SPIWrite(self.REG_FRF_MID,[(frf>>8)&0xFF]) self.SPIWrite(self.REG_FRF_LSB,[frf&0xFF]) @@ -247,7 +249,7 @@ def setSignalBandwidth(self,sbw): bw = num break num+=1 - print ('bandwidth: ',bw) + print('bandwidth: ',bw) self.SPIWrite(self.REG_MODEM_CONFIG_1,[(self.SPIRead(self.REG_MODEM_CONFIG_1)[0]&0x0F)|(bw<<4)]) def setCodingRate4(self,denominator): @@ -290,7 +292,7 @@ def handleDio0Rise(self): self.SPIWrite(self.REG_FIFO_ADDR_PTR,self.SPIRead(self.REG_FIFO_RX_CURRENT_ADDR,1)) if self._onReceive: - print self.packetLength + print(self.packetLength) #self._onReceive(self.packetLength) self.SPIWrite(self.REG_FIFO_ADDR_PTR,[0]) @@ -319,13 +321,12 @@ def getRaw(self): lora.beginPacket() lora.write([cntr]) #lora.write([ord(a) for a in ":"]+[cntr]) - print (time.ctime(),[ord(a) for a in ":"]+[cntr], hex(lora.SPIRead(lora.REG_OP_MODE)[0])) + print(time.ctime(),[ord(a) for a in ":"]+[cntr], hex(lora.SPIRead(lora.REG_OP_MODE)[0])) lora.endPacket() cntr+=1 if cntr==255:cntr=0 elif mode==RX: packet_size = lora.parsePacket() if packet_size: - print 'data',lora.readAll() - print ('Rssi',lora.packetRssi(),lora.packetSnr()) - + print('data',lora.readAll()) + print('Rssi',lora.packetRssi(),lora.packetSnr()) pFad - Phonifier reborn

Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.

Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.

Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy