Digital Signal Processing using Arm Cortex-M based Microcontrollers

Translating the book from C to Rust. No relation to the author.

Requires

• Rust 1.5.1
• rustup target add thumbv7em-none-eabihf
• STM32F407G-DISC1 board
• Possibly updated stlink firmware
• (linux) udev rules /etc/udev/rules.d/49-stinkv2-1.rules and a reboot

SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="374a", \
    MODE:="0666", \
    SYMLINK+="stlinkv2-1_%n"

SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="374b", \
    MODE:="0666", \
    SYMLINK+="stlinkv2-1_%n"

GDB debugging

Requires:

• OpenOCD 0.11.0

For desperate cases, swap your runner in .cargo/config for the openocd configuration, start an open ocd server with openocd -f interface/stlink-v2-1.cfg -f target/stm32f4x.cfg, and cargo run.