[Full Changelog](https://github.com/SHA2017-badge/micropython-esp32/compare/sha2...HEAD)

**Implemented enhancements:**

- add badge.mpr121\_get\_touch\_info\(\) [\#175](https://github.com/SHA2017-badge/micropython-esp32/pull/175) ([basvs](https://github.com/basvs))

- Fix msg function as per roosteds request [\#144](https://github.com/SHA2017-badge/micropython-esp32/pull/144) ([rnplus](https://github.com/rnplus))

**Fixed bugs:**

- Launcher reset index switching category [\#140](https://github.com/SHA2017-badge/micropython-esp32/issues/140)

- Compensation for bad battery voltage measurements [\#94](https://github.com/SHA2017-badge/micropython-esp32/issues/94)

**Closed issues:**

- Some NVS settings are unreachable [\#209](https://github.com/SHA2017-badge/micropython-esp32/issues/209)

- Flipping the screen doesn't work as expected [\#206](https://github.com/SHA2017-badge/micropython-esp32/issues/206)

- When waking up from touch interrupt, the information about the touch event is lost [\#154](https://github.com/SHA2017-badge/micropython-esp32/issues/154)

- Splash does too many refreshes [\#149](https://github.com/SHA2017-badge/micropython-esp32/issues/149)

- Leaving badge in launcher or installer accidentally drains battery fast [\#148](https://github.com/SHA2017-badge/micropython-esp32/issues/148)

- open\(\) does not allow binary IO [\#146](https://github.com/SHA2017-badge/micropython-esp32/issues/146)

- Lots of ghosting after initial boot & sponsor app [\#137](https://github.com/SHA2017-badge/micropython-esp32/issues/137)

- boot.py not update-able via OTA [\#115](https://github.com/SHA2017-badge/micropython-esp32/issues/115)

- Put peripherals to sleep on deepsleep [\#114](https://github.com/SHA2017-badge/micropython-esp32/issues/114)

- Choose your own \(fancy nick etc\) screensaver [\#110](https://github.com/SHA2017-badge/micropython-esp32/issues/110)

- missing uos.urandom\(n\) in emulator [\#108](https://github.com/SHA2017-badge/micropython-esp32/issues/108)

- If battery is almost empty, nick is not visible anymore [\#96](https://github.com/SHA2017-badge/micropython-esp32/issues/96)

- Battery does not last half a day [\#95](https://github.com/SHA2017-badge/micropython-esp32/issues/95)

- No folders / categories in the launcher and installer [\#91](https://github.com/SHA2017-badge/micropython-esp32/issues/91)

- 'enter' on the OSK should submit the prompt [\#48](https://github.com/SHA2017-badge/micropython-esp32/issues/48)

**Merged pull requests:**

- Run applications from bpp and sdcard as well. [\#228](https://github.com/SHA2017-badge/micropython-esp32/pull/228) ([basvs](https://github.com/basvs))

- add badge.i2c\_read\_reg\(\) and badge.i2c\_write\_reg\(\) [\#226](https://github.com/SHA2017-badge/micropython-esp32/pull/226) ([basvs](https://github.com/basvs))

- add badge.eink\_png\_info\(filename or bytestring\) [\#225](https://github.com/SHA2017-badge/micropython-esp32/pull/225) ([basvs](https://github.com/basvs))

- when the splash screen doesn't start, revert to default splash screen. [\#223](https://github.com/SHA2017-badge/micropython-esp32/pull/223) ([basvs](https://github.com/basvs))

- add justifyTop when drawing text in an ugfx list item. [\#222](https://github.com/SHA2017-badge/micropython-esp32/pull/222) ([basvs](https://github.com/basvs))

- move tm12x6\_font terminus font to read-only memory. [\#220](https://github.com/SHA2017-badge/micropython-esp32/pull/220) ([basvs](https://github.com/basvs))

- Remove badge-event-reminder [\#219](https://github.com/SHA2017-badge/micropython-esp32/pull/219) ([basvs](https://github.com/basvs))

- Add/fixup timezone support [\#218](https://github.com/SHA2017-badge/micropython-esp32/pull/218) ([basvs](https://github.com/basvs))

- Merge upstream [\#217](https://github.com/SHA2017-badge/micropython-esp32/pull/217) ([basvs](https://github.com/basvs))

- work around time.time\(\) brokenness [\#215](https://github.com/SHA2017-badge/micropython-esp32/pull/215) ([basvs](https://github.com/basvs))

- Stop the badge waking up every few tens of seconds [\#213](https://github.com/SHA2017-badge/micropython-esp32/pull/213) ([gavanfantom](https://github.com/gavanfantom))

- allow chdir to mountpoints \('/', '/sdcard' and '/bpp'\) [\#212](https://github.com/SHA2017-badge/micropython-esp32/pull/212) ([basvs](https://github.com/basvs))

- Introduce ugfx\_screen\_flipped in the emulator, too [\#211](https://github.com/SHA2017-badge/micropython-esp32/pull/211) ([raboof](https://github.com/raboof))

- rewrite set\_orientation to use the ugfx\_screen\_flip for rotations \>= … [\#210](https://github.com/SHA2017-badge/micropython-esp32/pull/210) ([basvs](https://github.com/basvs))

- Added small, simple alternative GUI library \(freedomgfx\), which respects all four freedoms [\#208](https://github.com/SHA2017-badge/micropython-esp32/pull/208) ([chca42](https://github.com/chca42))

- update event time and room [\#207](https://github.com/SHA2017-badge/micropython-esp32/pull/207) ([basvs](https://github.com/basvs))

- Safe mode to allow recovery from malware [\#205](https://github.com/SHA2017-badge/micropython-esp32/pull/205) ([gavanfantom](https://github.com/gavanfantom))

- push sponsors app [\#204](https://github.com/SHA2017-badge/micropython-esp32/pull/204) ([basvs](https://github.com/basvs))

- soft reboot in raw REPL mode skips boot.py \(for ampy, pyboard\) [\#203](https://github.com/SHA2017-badge/micropython-esp32/pull/203) ([projectgus](https://github.com/projectgus))

- Read PNG files directly from byte-string. [\#202](https://github.com/SHA2017-badge/micropython-esp32/pull/202) ([basvs](https://github.com/basvs))

- update esp-idf git hash [\#201](https://github.com/SHA2017-badge/micropython-esp32/pull/201) ([basvs](https://github.com/basvs))

- fix update all; update next egg if update failed. [\#200](https://github.com/SHA2017-badge/micropython-esp32/pull/200) ([basvs](https://github.com/basvs))

- add option to stay awake on usb; suppress debug logging [\#199](https://github.com/SHA2017-badge/micropython-esp32/pull/199) ([basvs](https://github.com/basvs))

- Suppress vfs\_native\_file open file error [\#198](https://github.com/SHA2017-badge/micropython-esp32/pull/198) ([basvs](https://github.com/basvs))

- fix max open file descriptors in woezel [\#197](https://github.com/SHA2017-badge/micropython-esp32/pull/197) ([basvs](https://github.com/basvs))

- If a package fails to install, report this to the user. If the reason [\#196](https://github.com/SHA2017-badge/micropython-esp32/pull/196) ([gavanfantom](https://github.com/gavanfantom))

- Erase the otadata partition when flashing firmware, so that we can be… [\#195](https://github.com/SHA2017-badge/micropython-esp32/pull/195) ([gavanfantom](https://github.com/gavanfantom))

- Use a timeout on fetching data, and handle failures gracefully. [\#194](https://github.com/SHA2017-badge/micropython-esp32/pull/194) ([gavanfantom](https://github.com/gavanfantom))

- Use 'with open\(\) as f:' instead of 'f = open\(\)' [\#193](https://github.com/SHA2017-badge/micropython-esp32/pull/193) ([basvs](https://github.com/basvs))

- Revert "Upy use powerdown mgr" [\#191](https://github.com/SHA2017-badge/micropython-esp32/pull/191) ([basvs](https://github.com/basvs))

- fix big-endian packing to 8 bytes [\#190](https://github.com/SHA2017-badge/micropython-esp32/pull/190) ([basvs](https://github.com/basvs))

- Make Jan Henk again. [\#189](https://github.com/SHA2017-badge/micropython-esp32/pull/189) ([ranzbak](https://github.com/ranzbak))

- Change lipo bat indicator voltages [\#188](https://github.com/SHA2017-badge/micropython-esp32/pull/188) ([Roosted7](https://github.com/Roosted7))

- Add make flash to makefile [\#187](https://github.com/SHA2017-badge/micropython-esp32/pull/187) ([Roosted7](https://github.com/Roosted7))

- add experimental temperature sensor and hall sensor. [\#186](https://github.com/SHA2017-badge/micropython-esp32/pull/186) ([basvs](https://github.com/basvs))

- Add a new optional argument to the draw\(\) function in a service, whic… [\#185](https://github.com/SHA2017-badge/micropython-esp32/pull/185) ([gavanfantom](https://github.com/gavanfantom))

- Fix redraw loop when idle [\#184](https://github.com/SHA2017-badge/micropython-esp32/pull/184) ([gavanfantom](https://github.com/gavanfantom))

- Add time to OTA check [\#182](https://github.com/SHA2017-badge/micropython-esp32/pull/182) ([rnplus](https://github.com/rnplus))

- Allow services to execute a special draw function just before sleeping [\#181](https://github.com/SHA2017-badge/micropython-esp32/pull/181) ([rnplus](https://github.com/rnplus))

- Exception reporting and post OTA update script [\#180](https://github.com/SHA2017-badge/micropython-esp32/pull/180) ([rnplus](https://github.com/rnplus))

- add wrapper around badge\_eink\_display\(\) method [\#179](https://github.com/SHA2017-badge/micropython-esp32/pull/179) ([basvs](https://github.com/basvs))

- New launcher [\#178](https://github.com/SHA2017-badge/micropython-esp32/pull/178) ([rnplus](https://github.com/rnplus))

- add simple wrapper for low-level bpp flash data [\#177](https://github.com/SHA2017-badge/micropython-esp32/pull/177) ([basvs](https://github.com/basvs))

- do not re-install the gpio-isr-service. it's already installed. [\#176](https://github.com/SHA2017-badge/micropython-esp32/pull/176) ([basvs](https://github.com/basvs))

- Add set\_timeout to power management [\#174](https://github.com/SHA2017-badge/micropython-esp32/pull/174) ([rnplus](https://github.com/rnplus))

- Add update all app to firmware [\#173](https://github.com/SHA2017-badge/micropython-esp32/pull/173) ([rnplus](https://github.com/rnplus))

- Add power management to launcher [\#172](https://github.com/SHA2017-badge/micropython-esp32/pull/172) ([rnplus](https://github.com/rnplus))

- Move mount-code to modbadge; add sdcard support [\#171](https://github.com/SHA2017-badge/micropython-esp32/pull/171) ([basvs](https://github.com/basvs))

- Change led brightness for event reminder and make rtc mandatory again [\#170](https://github.com/SHA2017-badge/micropython-esp32/pull/170) ([rnplus](https://github.com/rnplus))

- Fixed a couple of small bugs [\#169](https://github.com/SHA2017-badge/micropython-esp32/pull/169) ([rnplus](https://github.com/rnplus))

- Add some sugar and spice to make things nice [\#168](https://github.com/SHA2017-badge/micropython-esp32/pull/168) ([rnplus](https://github.com/rnplus))

- Renze cleanup [\#167](https://github.com/SHA2017-badge/micropython-esp32/pull/167) ([rnplus](https://github.com/rnplus))

- set type after determining type.. [\#166](https://github.com/SHA2017-badge/micropython-esp32/pull/166) ([basvs](https://github.com/basvs))

- Add nice change by raboof [\#165](https://github.com/SHA2017-badge/micropython-esp32/pull/165) ([rnplus](https://github.com/rnplus))

- Working services [\#164](https://github.com/SHA2017-badge/micropython-esp32/pull/164) ([rnplus](https://github.com/rnplus))

- Add some warning notes when using badge.leds\_send\_data\(\) incorrectly [\#163](https://github.com/SHA2017-badge/micropython-esp32/pull/163) ([basvs](https://github.com/basvs))

- Add optional timestamp argument to easyrtc.string\(\) [\#160](https://github.com/SHA2017-badge/micropython-esp32/pull/160) ([rnplus](https://github.com/rnplus))

- Upy use powerdown mgr [\#159](https://github.com/SHA2017-badge/micropython-esp32/pull/159) ([Spritetm](https://github.com/Spritetm))

- Service api v2 [\#158](https://github.com/SHA2017-badge/micropython-esp32/pull/158) ([rnplus](https://github.com/rnplus))

- Lower loglevel of wifi at runtime [\#157](https://github.com/SHA2017-badge/micropython-esp32/pull/157) ([Roosted7](https://github.com/Roosted7))

- Fix errors introduced by changing easydraw.msg\(\) function [\#155](https://github.com/SHA2017-badge/micropython-esp32/pull/155) ([rnplus](https://github.com/rnplus))

- add badge.eink\_deep\_sleep\(\) and badge.eink\_wakeup\(\) [\#153](https://github.com/SHA2017-badge/micropython-esp32/pull/153) ([basvs](https://github.com/basvs))

- Add more badge\_power hooks. [\#151](https://github.com/SHA2017-badge/micropython-esp32/pull/151) ([basvs](https://github.com/basvs))

- add badge.GREYSCALE const. [\#150](https://github.com/SHA2017-badge/micropython-esp32/pull/150) ([basvs](https://github.com/basvs))

- initialize with default eink type. \(as configured in make menuconfig\) [\#145](https://github.com/SHA2017-badge/micropython-esp32/pull/145) ([basvs](https://github.com/basvs))

- Fix a big bug and a little bit of cleaning [\#143](https://github.com/SHA2017-badge/micropython-esp32/pull/143) ([rnplus](https://github.com/rnplus))

- Split splash into smaller parts, thereby creating helper files for some functions [\#142](https://github.com/SHA2017-badge/micropython-esp32/pull/142) ([rnplus](https://github.com/rnplus))

- Makefile improvements [\#141](https://github.com/SHA2017-badge/micropython-esp32/pull/141) ([basvs](https://github.com/basvs))

- Bugfixes for splash [\#139](https://github.com/SHA2017-badge/micropython-esp32/pull/139) ([rnplus](https://github.com/rnplus))

- Updated splash code and try to mount bpp [\#138](https://github.com/SHA2017-badge/micropython-esp32/pull/138) ([rnplus](https://github.com/rnplus))

- Up installer WiFi timeout from 4s to 15s [\#136](https://github.com/SHA2017-badge/micropython-esp32/pull/136) ([niekproductions](https://github.com/niekproductions))

- Update demo.py [\#135](https://github.com/SHA2017-badge/micropython-esp32/pull/135) ([powermik](https://github.com/powermik))

- renamed badge\_portexp to badge\_fxl6408 [\#134](https://github.com/SHA2017-badge/micropython-esp32/pull/134) ([basvs](https://github.com/basvs))

- Pull changes from upstream [\#133](https://github.com/SHA2017-badge/micropython-esp32/pull/133) ([Roosted7](https://github.com/Roosted7))

- badge\_touch -\> badge\_cpt112s [\#132](https://github.com/SHA2017-badge/micropython-esp32/pull/132) ([basvs](https://github.com/basvs))

- uos.urandom\(\) bugfix. [\#131](https://github.com/SHA2017-badge/micropython-esp32/pull/131) ([basvs](https://github.com/basvs))

- Added gfx\_userfs glue to micropython build [\#130](https://github.com/SHA2017-badge/micropython-esp32/pull/130) ([aczid](https://github.com/aczid))

- Add support for removal of NVS page [\#129](https://github.com/SHA2017-badge/micropython-esp32/pull/129) ([Roosted7](https://github.com/Roosted7))

- Added a urandom port for Unix build [\#127](https://github.com/SHA2017-badge/micropython-esp32/pull/127) ([aczid](https://github.com/aczid))

[Full Changelog](https://github.com/SHA2017-badge/micropython-esp32/compare/sha1...sha2)

**Implemented enhancements:**

- Installer rewrite w/ category support [\#120](https://github.com/SHA2017-badge/micropython-esp32/pull/120) ([niekproductions](https://github.com/niekproductions))

- Launcher UX fixes [\#107](https://github.com/SHA2017-badge/micropython-esp32/pull/107) ([niekproductions](https://github.com/niekproductions))

**Closed issues:**

- Led driver not working properly above Hex 0x7F [\#119](https://github.com/SHA2017-badge/micropython-esp32/issues/119)

- ugfx.init\(\) flashes screen [\#112](https://github.com/SHA2017-badge/micropython-esp32/issues/112)

- rtcmem: check if offset is valid [\#111](https://github.com/SHA2017-badge/micropython-esp32/issues/111)

- 'Flash' button not used [\#99](https://github.com/SHA2017-badge/micropython-esp32/issues/99)

- nvs\_\[get/set\]\_u\[8/16\] not working [\#93](https://github.com/SHA2017-badge/micropython-esp32/issues/93)

- woezel unzip dict size [\#82](https://github.com/SHA2017-badge/micropython-esp32/issues/82)

- Sponsor app not working [\#78](https://github.com/SHA2017-badge/micropython-esp32/issues/78)

**Merged pull requests:**

- Consistent UI and updated installer [\#126](https://github.com/SHA2017-badge/micropython-esp32/pull/126) ([Roosted7](https://github.com/Roosted7))

- use input framework to check for waiting input. [\#125](https://github.com/SHA2017-badge/micropython-esp32/pull/125) ([basvs](https://github.com/basvs))

- New setup and default name [\#124](https://github.com/SHA2017-badge/micropython-esp32/pull/124) ([Roosted7](https://github.com/Roosted7))

- support negative offsets in png image loading [\#122](https://github.com/SHA2017-badge/micropython-esp32/pull/122) ([annejan](https://github.com/annejan))

- cleanup esp-rtcmem code. throw out-of-range exceptions. [\#121](https://github.com/SHA2017-badge/micropython-esp32/pull/121) ([basvs](https://github.com/basvs))

- Update makefile: faster boot and flash [\#118](https://github.com/SHA2017-badge/micropython-esp32/pull/118) ([Roosted7](https://github.com/Roosted7))

- Major python code change [\#116](https://github.com/SHA2017-badge/micropython-esp32/pull/116) ([Roosted7](https://github.com/Roosted7))

- Added extra urandom functions [\#109](https://github.com/SHA2017-badge/micropython-esp32/pull/109) ([aczid](https://github.com/aczid))

- lower max\_files from 8 to 3. [\#106](https://github.com/SHA2017-badge/micropython-esp32/pull/106) ([basvs](https://github.com/basvs))

- Remove deprecated led function [\#105](https://github.com/SHA2017-badge/micropython-esp32/pull/105) ([Roosted7](https://github.com/Roosted7))

- expose badge.nvs\_erase\_key\(\) [\#103](https://github.com/SHA2017-badge/micropython-esp32/pull/103) ([basvs](https://github.com/basvs))

- Code cleanup of the badge.nvs\_\* code. [\#102](https://github.com/SHA2017-badge/micropython-esp32/pull/102) ([basvs](https://github.com/basvs))

- Setup.state as u8 and shorter keys [\#101](https://github.com/SHA2017-badge/micropython-esp32/pull/101) ([rnplus](https://github.com/rnplus))

- report tls error messages instead of crashing. [\#100](https://github.com/SHA2017-badge/micropython-esp32/pull/100) ([basvs](https://github.com/basvs))

[Full Changelog](https://github.com/SHA2017-badge/micropython-esp32/compare/v1.9.1...sha1)

- Zo is ie mooier. [\#88](https://github.com/SHA2017-badge/micropython-esp32/pull/88) ([rnplus](https://github.com/rnplus))

- About [\#87](https://github.com/SHA2017-badge/micropython-esp32/pull/87) ([rnplus](https://github.com/rnplus))

- OTA check + Other fixes [\#86](https://github.com/SHA2017-badge/micropython-esp32/pull/86) ([rnplus](https://github.com/rnplus))

- dump esp heap info. [\#85](https://github.com/SHA2017-badge/micropython-esp32/pull/85) ([basvs](https://github.com/basvs))

- Basvs ugfx greyscale [\#84](https://github.com/SHA2017-badge/micropython-esp32/pull/84) ([annejan](https://github.com/annejan))

- Basvs preseed unzip [\#83](https://github.com/SHA2017-badge/micropython-esp32/pull/83) ([annejan](https://github.com/annejan))