diff --git a/ports/rp2/boards/ARDUINO_NANO_RP2040_CONNECT/manifest.py b/ports/rp2/boards/ARDUINO_NANO_RP2040_CONNECT/manifest.py
index dbd45fa408e63..5061e2cf0516a 100644
--- a/ports/rp2/boards/ARDUINO_NANO_RP2040_CONNECT/manifest.py
+++ b/ports/rp2/boards/ARDUINO_NANO_RP2040_CONNECT/manifest.py
@@ -3,9 +3,14 @@
# Networking
require("webrepl")
require("urequests")
+require("ntptime")
# Drivers
require("lsm6dsox")
+require("espflash")
+
+# Utils
+require("logging")
# Bluetooth
require("aioble", client=True, central=True, l2cap=True, security=True)
diff --git a/ports/rp2/boards/ARDUINO_NANO_RP2040_CONNECT/mpconfigboard.h b/ports/rp2/boards/ARDUINO_NANO_RP2040_CONNECT/mpconfigboard.h
index 5ea9b8cdb850f..1818b56a689fe 100644
--- a/ports/rp2/boards/ARDUINO_NANO_RP2040_CONNECT/mpconfigboard.h
+++ b/ports/rp2/boards/ARDUINO_NANO_RP2040_CONNECT/mpconfigboard.h
@@ -7,6 +7,9 @@
// Enable networking.
#define MICROPY_PY_NETWORK (1)
+// Enable MD5 hash.
+#define MICROPY_PY_UHASHLIB_MD5 (1)
+
// Disable internal error numbers.
#define MICROPY_USE_INTERNAL_ERRNO (0)
diff --git a/ports/stm32/boards/ARDUINO_PORTENTA_H7/deploy.md b/ports/stm32/boards/ARDUINO_PORTENTA_H7/deploy.md
index 8de726b43b4c3..7f738c5791584 100644
--- a/ports/stm32/boards/ARDUINO_PORTENTA_H7/deploy.md
+++ b/ports/stm32/boards/ARDUINO_PORTENTA_H7/deploy.md
@@ -4,7 +4,7 @@ This board can programmed via DFU bootloader, using e.g. [dfu-util](http://dfu-u
To enter the DFU bootloader, double tap the reset (blue) button, or you can use `machine.bootloader()` from the MicroPython REPL.
```bash
-dfu-util -w -d 2341:035b -a 0 -d 0x8040000 -D firmware.dfu
+dfu-util -w -a 0 -d 2341:035b -D build-ARDUINO_PORTENTA_H7/firmware.dfu
```
Or from MicroPython source repository:
diff --git a/ports/stm32/boards/ARDUINO_PORTENTA_H7/manifest.py b/ports/stm32/boards/ARDUINO_PORTENTA_H7/manifest.py
index 4fa92b7205327..3041e77fdb048 100644
--- a/ports/stm32/boards/ARDUINO_PORTENTA_H7/manifest.py
+++ b/ports/stm32/boards/ARDUINO_PORTENTA_H7/manifest.py
@@ -1,3 +1,12 @@
include("$(PORT_DIR)/boards/manifest.py")
+
+# Networking
require("webrepl")
+require("urequests")
+require("ntptime")
+
+# Utils
+require("logging")
+
+# Bluetooth
require("aioble", client=True, central=True, l2cap=True, security=True)
diff --git a/ports/stm32/boards/ARDUINO_PORTENTA_H7/mpconfigboard.h b/ports/stm32/boards/ARDUINO_PORTENTA_H7/mpconfigboard.h
index 31e19c9eb51ab..a2981352a1b80 100644
--- a/ports/stm32/boards/ARDUINO_PORTENTA_H7/mpconfigboard.h
+++ b/ports/stm32/boards/ARDUINO_PORTENTA_H7/mpconfigboard.h
@@ -159,6 +159,9 @@ extern struct _spi_bdev_t spi_bdev;
#define MICROPY_HW_UART7_CTS (pyb_pin_BT_CTS)
// I2C busses
+#define MICROPY_HW_I2C1_SCL (pin_B6)
+#define MICROPY_HW_I2C1_SDA (pin_B7)
+
#define MICROPY_HW_I2C3_SCL (pin_H7)
#define MICROPY_HW_I2C3_SDA (pin_H8)
@@ -206,8 +209,8 @@ extern struct _spi_bdev_t spi_bdev;
#define MICROPY_HW_USB_HS_ULPI_DIR (pin_I11)
#define MICROPY_HW_USB_HS_ULPI3320 (1)
-#define MICROPY_HW_USB_CDC_RX_DATA_SIZE (512)
-#define MICROPY_HW_USB_CDC_TX_DATA_SIZE (512)
+#define MICROPY_HW_USB_CDC_RX_DATA_SIZE (1024)
+#define MICROPY_HW_USB_CDC_TX_DATA_SIZE (1024)
#define MICROPY_HW_USB_CDC_1200BPS_TOUCH (1)
#define GPIO_AF10_OTG_HS (GPIO_AF10_OTG2_HS)
diff --git a/ports/stm32/boards/ARDUINO_PORTENTA_H7/pins.csv b/ports/stm32/boards/ARDUINO_PORTENTA_H7/pins.csv
index b22da66dd4c08..6ab00f02ec402 100644
--- a/ports/stm32/boards/ARDUINO_PORTENTA_H7/pins.csv
+++ b/ports/stm32/boards/ARDUINO_PORTENTA_H7/pins.csv
@@ -231,3 +231,4 @@ I2C3_SCL,PH7
-QSPI2_D1,PD12
-QSPI2_D2,-PF7
-QSPI2_D3,PD13
+-SE05X_EN,-PI12
pFad - Phonifier reborn
Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.
Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.
Alternative Proxies:
Alternative Proxy
pFad Proxy
pFad v3 Proxy
pFad v4 Proxy