Don't hardcode tmp_check/ as test directory for tap tests

anarazel · anarazel · commit bb54bf22900f · 2022-09-19T18:00:50.000-07:00
This is motivated by the meson patchset, which wants to put the log / data for tests in a different place than the autoconf build. Right now log files for tap tests have to be inside $TESTDIR/tmp_check, whereas log files for pg_regress/isolationtester are outside of tmp_check. This change doesn't fix the latter, but is a prerequisite. The only test that needs adjustment is 010_tab_completion.pl, as it hardcoded the tmp_check/ directory. Instead create a dedicated directory for the test files. It's also a bit cleaner independently, because it doesn't intermingle the test files with more important things like the log/ directory. Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com> Discussion: https://postgr.es/m/1131990.1660661896@sss.pgh.pa.us Discussion: https://postgr.es/m/d861493c-ed20-c251-7a89-7924f5197341@enterprisedb.com
diff --git a/src/Makefile.global.in b/src/Makefile.global.in
@@ -451,7 +451,7 @@ echo "+++ tap install-check in $(subdir) +++" && \
 rm -rf '$(CURDIR)'/tmp_check && \
 $(MKDIR_P) '$(CURDIR)'/tmp_check && \
 cd $(srcdir) && \
-   TESTDIR='$(CURDIR)' PATH="$(bindir):$(CURDIR):$$PATH" \
+   TESTDIR='$(CURDIR)/tmp_check' PATH="$(bindir):$(CURDIR):$$PATH" \
    PGPORT='6$(DEF_PGPORT)' top_builddir='$(CURDIR)/$(top_builddir)' \
    PG_REGRESS='$(CURDIR)/$(top_builddir)/src/test/regress/pg_regress' \
    $(PROVE) $(PG_PROVE_FLAGS) $(PROVE_FLAGS) $(if $(PROVE_TESTS),$(PROVE_TESTS),t/*.pl)
@@ -462,7 +462,7 @@ echo "+++ tap install-check in $(subdir) +++" && \
 rm -rf '$(CURDIR)'/tmp_check && \
 $(MKDIR_P) '$(CURDIR)'/tmp_check && \
 cd $(srcdir) && \
-   TESTDIR='$(CURDIR)' PATH="$(bindir):$(CURDIR):$$PATH" \
+   TESTDIR='$(CURDIR)/tmp_check' PATH="$(bindir):$(CURDIR):$$PATH" \
    PGPORT='6$(DEF_PGPORT)' top_builddir='$(top_builddir)' \
    PG_REGRESS='$(top_builddir)/src/test/regress/pg_regress' \
    $(PROVE) $(PG_PROVE_FLAGS) $(PROVE_FLAGS) $(if $(PROVE_TESTS),$(PROVE_TESTS),t/*.pl)
@@ -474,7 +474,7 @@ echo "+++ tap check in $(subdir) +++" && \
 rm -rf '$(CURDIR)'/tmp_check && \
 $(MKDIR_P) '$(CURDIR)'/tmp_check && \
 cd $(srcdir) && \
-   TESTDIR='$(CURDIR)' $(with_temp_install) PGPORT='6$(DEF_PGPORT)' \
+   TESTDIR='$(CURDIR)/tmp_check' $(with_temp_install) PGPORT='6$(DEF_PGPORT)' \
    PG_REGRESS='$(CURDIR)/$(top_builddir)/src/test/regress/pg_regress' \
    $(PROVE) $(PG_PROVE_FLAGS) $(PROVE_FLAGS) $(if $(PROVE_TESTS),$(PROVE_TESTS),t/*.pl)
 endef
diff --git a/src/bin/psql/t/010_tab_completion.pl b/src/bin/psql/t/010_tab_completion.pl
@@ -68,25 +68,26 @@
 
 # In a VPATH build, we'll be started in the source directory, but we want
 # to run in the build directory so that we can use relative paths to
-# access the tmp_check subdirectory; otherwise the output from filename
+# access the tab_comp_dir subdirectory; otherwise the output from filename
 # completion tests is too variable.
 if ($ENV{TESTDIR})
 {
 	chdir $ENV{TESTDIR} or die "could not chdir to \"$ENV{TESTDIR}\": $!";
 }
 
 # Create some junk files for filename completion testing.
+mkdir "tab_comp_dir";
 my $FH;
-open $FH, ">", "tmp_check/somefile"
-  or die("could not create file \"tmp_check/somefile\": $!");
+open $FH, ">", "tab_comp_dir/somefile"
+  or die("could not create file \"tab_comp_dir/somefile\": $!");
 print $FH "some stuff\n";
 close $FH;
-open $FH, ">", "tmp_check/afile123"
-  or die("could not create file \"tmp_check/afile123\": $!");
+open $FH, ">", "tab_comp_dir/afile123"
+  or die("could not create file \"tab_comp_dir/afile123\": $!");
 print $FH "more stuff\n";
 close $FH;
-open $FH, ">", "tmp_check/afile456"
-  or die("could not create file \"tmp_check/afile456\": $!");
+open $FH, ">", "tab_comp_dir/afile456"
+  or die("could not create file \"tab_comp_dir/afile456\": $!");
 print $FH "other stuff\n";
 close $FH;
 
@@ -272,16 +273,16 @@ sub clear_line
 
 # check filename completion
 check_completion(
-	"\\lo_import tmp_check/some\t",
-	qr|tmp_check/somefile |,
+	"\\lo_import tab_comp_dir/some\t",
+	qr|tab_comp_dir/somefile |,
 	"filename completion with one possibility");
 
 clear_query();
 
 # note: readline might print a bell before the completion
 check_completion(
-	"\\lo_import tmp_check/af\t",
-	qr|tmp_check/af\a?ile|,
+	"\\lo_import tab_comp_dir/af\t",
+	qr|tab_comp_dir/af\a?ile|,
 	"filename completion with multiple possibilities");
 
 # broken versions of libedit require clear_line not clear_query here
@@ -291,23 +292,23 @@ sub clear_line
 # note: broken versions of libedit want to backslash the closing quote;
 # not much we can do about that
 check_completion(
-	"COPY foo FROM tmp_check/some\t",
-	qr|'tmp_check/somefile\\?' |,
+	"COPY foo FROM tab_comp_dir/some\t",
+	qr|'tab_comp_dir/somefile\\?' |,
 	"quoted filename completion with one possibility");
 
 clear_line();
 
 check_completion(
-	"COPY foo FROM tmp_check/af\t",
-	qr|'tmp_check/afile|,
+	"COPY foo FROM tab_comp_dir/af\t",
+	qr|'tab_comp_dir/afile|,
 	"quoted filename completion with multiple possibilities");
 
 # some versions of readline/libedit require two tabs here, some only need one
 # also, some will offer the whole path name and some just the file name
 # the quotes might appear, too
 check_completion(
 	"\t\t",
-	qr|afile123'? +'?(tmp_check/)?afile456|,
+	qr|afile123'? +'?(tab_comp_dir/)?afile456|,
 	"offer multiple file choices");
 
 clear_line();
diff --git a/src/test/perl/PostgreSQL/Test/Utils.pm b/src/test/perl/PostgreSQL/Test/Utils.pm
@@ -192,7 +192,7 @@ INIT
 	# Determine output directories, and create them.  The base path is the
 	# TESTDIR environment variable, which is normally set by the invoking
 	# Makefile.
-	$tmp_check = $ENV{TESTDIR} ? "$ENV{TESTDIR}/tmp_check" : "tmp_check";
+	$tmp_check = $ENV{TESTDIR} ? "$ENV{TESTDIR}" : "tmp_check";
 	$log_path = "$tmp_check/log";
 
 	mkdir $tmp_check;
diff --git a/src/tools/msvc/vcregress.pl b/src/tools/msvc/vcregress.pl
@@ -291,7 +291,7 @@ sub tap_check
 	$ENV{PG_REGRESS}    = "$topdir/$Config/pg_regress/pg_regress";
 	$ENV{REGRESS_SHLIB} = "$topdir/src/test/regress/regress.dll";
 
-	$ENV{TESTDIR} = "$dir";
+	$ENV{TESTDIR} = "$dir/tmp_check";
 	my $module = basename $dir;
 	# add the module build dir as the second element in the PATH
 	$ENV{PATH} =~ s!;!;$topdir/$Config/$module;!;
