diff --git a/Modules/_zstd/decompressor.c b/Modules/_zstd/decompressor.c
index a654a9540e1f05..dc3e90a22d8dbb 100644
--- a/Modules/_zstd/decompressor.c
+++ b/Modules/_zstd/decompressor.c
@@ -43,20 +43,11 @@ typedef struct {
     PyObject *unused_data;
 
     /* 0 if decompressor has (or may has) unconsumed input data, 0 or 1. */
-    char needs_input;
-
-    /* For decompress(), 0 or 1.
-       1 when both input and output streams are at a frame edge, means a
-       frame is completely decoded and fully flushed, or the decompressor
-       just be initialized. */
-    char at_frame_edge;
+    bool needs_input;
 
     /* For ZstdDecompressor, 0 or 1.
        1 means the end of the first frame has been reached. */
-    char eof;
-
-    /* Used for fast reset above three variables */
-    char _unused_char_for_align;
+    bool eof;
 
     /* __init__ has been called, 0 or 1. */
     bool initialized;
@@ -258,19 +249,13 @@ _zstd_load_d_dict(ZstdDecompressor *self, PyObject *dict)
     return 0;
 }
 
-typedef enum {
-    TYPE_DECOMPRESSOR,          // <D>, ZstdDecompressor class
-    TYPE_ENDLESS_DECOMPRESSOR,  // <E>, decompress() function
-} decompress_type;
-
 /*
-    Given the two types of decompressors (defined above),
-    decompress implementation for <D>, <E>, pseudo code:
+    Decompress implementation in pseudo code:
 
         initialize_output_buffer
         while True:
             decompress_data
-            set_object_flag   # .eof for <D>, .at_frame_edge for <E>.
+            set_object_flag   # .eof
 
             if output_buffer_exhausted:
                 if output_buffer_reached_max_length:
@@ -287,63 +272,19 @@ typedef enum {
         flushing to do to complete current frame.
 
       Note, decompressing "an empty input" in any case will make it > 0.
-
-    <E> supports multiple frames, has an .at_frame_edge flag, it means both the
-    input and output streams are at a frame edge. The flag can be set by this
-    statement:
-
-        .at_frame_edge = (zstd_ret == 0) ? 1 : 0
-
-    But if decompressing "an empty input" at "a frame edge", zstd_ret will be
-    non-zero, then .at_frame_edge will be wrongly set to false. To solve this
-    problem, two AFE checks are needed to ensure that: when at "a frame edge",
-    empty input will not be decompressed.
-
-        // AFE check
-        if (self->at_frame_edge && in->pos == in->size) {
-            finish
-        }
-
-    In <E>, if .at_frame_edge is eventually set to true, but input stream has
-    unconsumed data (in->pos < in->size), then the outer function
-    stream_decompress() will set .at_frame_edge to false. In this case,
-    although the output stream is at a frame edge, for the caller, the input
-    stream is not at a frame edge, see below diagram. This behavior does not
-    affect the next AFE check, since (in->pos < in->size).
-
-    input stream:  --------------|---
-                                    ^
-    output stream: ====================|
-                                       ^
 */
 static PyObject *
 decompress_impl(ZstdDecompressor *self, ZSTD_inBuffer *in,
-                Py_ssize_t max_length,
-                Py_ssize_t initial_size,
-                decompress_type type)
+                Py_ssize_t max_length)
 {
     size_t zstd_ret;
     ZSTD_outBuffer out;
     _BlocksOutputBuffer buffer = {.list = NULL};
     PyObject *ret;
 
-    /* The first AFE check for setting .at_frame_edge flag */
-    if (type == TYPE_ENDLESS_DECOMPRESSOR) {
-        if (self->at_frame_edge && in->pos == in->size) {
-            return Py_GetConstant(Py_CONSTANT_EMPTY_BYTES);
-        }
-    }
-
     /* Initialize the output buffer */
-    if (initial_size >= 0) {
-        if (_OutputBuffer_InitWithSize(&buffer, &out, max_length, initial_size) < 0) {
-            goto error;
-        }
-    }
-    else {
-        if (_OutputBuffer_InitAndGrow(&buffer, &out, max_length) < 0) {
-            goto error;
-        }
+    if (_OutputBuffer_InitAndGrow(&buffer, &out, max_length) < 0) {
+        goto error;
     }
     assert(out.pos == 0);
 
@@ -362,22 +303,11 @@ decompress_impl(ZstdDecompressor *self, ZSTD_inBuffer *in,
             goto error;
         }
 
-        /* Set .eof/.af_frame_edge flag */
-        if (type == TYPE_DECOMPRESSOR) {
-            /* ZstdDecompressor class stops when a frame is decompressed */
-            if (zstd_ret == 0) {
-                self->eof = 1;
-                break;
-            }
-        }
-        else if (type == TYPE_ENDLESS_DECOMPRESSOR) {
-            /* decompress() function supports multiple frames */
-            self->at_frame_edge = (zstd_ret == 0) ? 1 : 0;
-
-            /* The second AFE check for setting .at_frame_edge flag */
-            if (self->at_frame_edge && in->pos == in->size) {
-                break;
-            }
+        /* Set .eof flag */
+        if (zstd_ret == 0) {
+            /* Stop when a frame is decompressed */
+            self->eof = 1;
+            break;
         }
 
         /* Need to check out before in. Maybe zstd's internal buffer still has
@@ -415,8 +345,7 @@ decompress_impl(ZstdDecompressor *self, ZSTD_inBuffer *in,
 }
 
 static void
-decompressor_reset_session(ZstdDecompressor *self,
-                           decompress_type type)
+decompressor_reset_session(ZstdDecompressor *self)
 {
     // TODO(emmatyping): use _Py_CRITICAL_SECTION_ASSERT_OBJECT_LOCKED here
     // and ensure lock is always held
@@ -425,56 +354,28 @@ decompressor_reset_session(ZstdDecompressor *self,
     self->in_begin = 0;
     self->in_end = 0;
 
-    if (type == TYPE_DECOMPRESSOR) {
-        Py_CLEAR(self->unused_data);
-    }
+    Py_CLEAR(self->unused_data);
 
     /* Reset variables in one operation */
     self->needs_input = 1;
-    self->at_frame_edge = 1;
     self->eof = 0;
-    self->_unused_char_for_align = 0;
 
-    /* Resetting session never fail */
+    /* Resetting session is guaranteed to never fail */
     ZSTD_DCtx_reset(self->dctx, ZSTD_reset_session_only);
 }
 
 static PyObject *
-stream_decompress(ZstdDecompressor *self, Py_buffer *data, Py_ssize_t max_length,
-                  decompress_type type)
+stream_decompress(ZstdDecompressor *self, Py_buffer *data, Py_ssize_t max_length)
 {
-    Py_ssize_t initial_buffer_size = -1;
     ZSTD_inBuffer in;
     PyObject *ret = NULL;
     int use_input_buffer;
 
-    if (type == TYPE_DECOMPRESSOR) {
-        /* Check .eof flag */
-        if (self->eof) {
-            PyErr_SetString(PyExc_EOFError, "Already at the end of a zstd frame.");
-            assert(ret == NULL);
-            goto success;
-        }
-    }
-    else if (type == TYPE_ENDLESS_DECOMPRESSOR) {
-        /* Fast path for the first frame */
-        if (self->at_frame_edge && self->in_begin == self->in_end) {
-            /* Read decompressed size */
-            uint64_t decompressed_size = ZSTD_getFrameContentSize(data->buf, data->len);
-
-            /* These two zstd constants always > PY_SSIZE_T_MAX:
-                  ZSTD_CONTENTSIZE_UNKNOWN is (0ULL - 1)
-                  ZSTD_CONTENTSIZE_ERROR   is (0ULL - 2)
-
-               Use ZSTD_findFrameCompressedSize() to check complete frame,
-               prevent allocating too much memory for small input chunk. */
-
-            if (decompressed_size <= (uint64_t) PY_SSIZE_T_MAX &&
-                !ZSTD_isError(ZSTD_findFrameCompressedSize(data->buf, data->len)) )
-            {
-                initial_buffer_size = (Py_ssize_t) decompressed_size;
-            }
-        }
+    /* Check .eof flag */
+    if (self->eof) {
+        PyErr_SetString(PyExc_EOFError, "Already at the end of a zstd frame.");
+        assert(ret == NULL);
+        return NULL;
     }
 
     /* Prepare input buffer w/wo unconsumed data */
@@ -561,30 +462,18 @@ stream_decompress(ZstdDecompressor *self, Py_buffer *data, Py_ssize_t max_length
     assert(in.pos == 0);
 
     /* Decompress */
-    ret = decompress_impl(self, &in,
-                          max_length, initial_buffer_size,
-                          type);
+    ret = decompress_impl(self, &in, max_length);
     if (ret == NULL) {
         goto error;
     }
 
     /* Unconsumed input data */
     if (in.pos == in.size) {
-        if (type == TYPE_DECOMPRESSOR) {
-            if (Py_SIZE(ret) == max_length || self->eof) {
-                self->needs_input = 0;
-            }
-            else {
-                self->needs_input = 1;
-            }
+        if (Py_SIZE(ret) == max_length || self->eof) {
+            self->needs_input = 0;
         }
-        else if (type == TYPE_ENDLESS_DECOMPRESSOR) {
-            if (Py_SIZE(ret) == max_length && !self->at_frame_edge) {
-                self->needs_input = 0;
-            }
-            else {
-                self->needs_input = 1;
-            }
+        else {
+            self->needs_input = 1;
         }
 
         if (use_input_buffer) {
@@ -598,10 +487,6 @@ stream_decompress(ZstdDecompressor *self, Py_buffer *data, Py_ssize_t max_length
 
         self->needs_input = 0;
 
-        if (type == TYPE_ENDLESS_DECOMPRESSOR) {
-            self->at_frame_edge = 0;
-        }
-
         if (!use_input_buffer) {
             /* Discard buffer if it's too small
                (resizing it may needlessly copy the current contents) */
@@ -634,16 +519,14 @@ stream_decompress(ZstdDecompressor *self, Py_buffer *data, Py_ssize_t max_length
         }
     }
 
-    goto success;
+    return ret;
 
 error:
     /* Reset decompressor's states/session */
-    decompressor_reset_session(self, type);
+    decompressor_reset_session(self);
 
     Py_CLEAR(ret);
-success:
-
-    return ret;
+    return NULL;
 }
 
 
@@ -668,9 +551,6 @@ _zstd_ZstdDecompressor_new(PyTypeObject *type, PyObject *args, PyObject *kwds)
     /* needs_input flag */
     self->needs_input = 1;
 
-    /* at_frame_edge flag */
-    self->at_frame_edge = 1;
-
     /* Decompression context */
     self->dctx = ZSTD_createDCtx();
     if (self->dctx == NULL) {
@@ -837,7 +717,7 @@ _zstd_ZstdDecompressor_decompress_impl(ZstdDecompressor *self,
     /* Thread-safe code */
     Py_BEGIN_CRITICAL_SECTION(self);
 
-    ret = stream_decompress(self, data, max_length, TYPE_DECOMPRESSOR);
+    ret = stream_decompress(self, data, max_length);
     Py_END_CRITICAL_SECTION();
     return ret;
 }

<!DOCTYPE html PUBLIC '-//W3C//DTD XHTML 1.0 Transitional//EN' 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd'>
<html xmlns='http://www.w3.org/1999/xhtml'>
<head>
<title>pFad - Phonifier reborn</title>
<meta http-equiv='Content-Type' content='text/html; charset=utf-8' />
</head>
<body>
<h1>Pfad - The Proxy pFad of &#169; 2024 Garber Painting. All rights reserved.</h1>


<!-- Disclaimer -->
<p>Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.</p>
<br>
<p>Alternative Proxies:</p><p><a href="http://rainy.clevelandohioweatherforecast.com/php-proxy/index.php?q=https://patch-diff.githubusercontent.com/raw/python/cpython/pull/133859.diff" target="_blank">Alternative Proxy</a></p><p><a href="http://rainy.clevelandohioweatherforecast.com/pFad/index.php?u=https://patch-diff.githubusercontent.com/raw/python/cpython/pull/133859.diff" target="_blank">pFad Proxy</a></p><p><a href="http://rainy.clevelandohioweatherforecast.com/pFad/v3index.php?u=https://patch-diff.githubusercontent.com/raw/python/cpython/pull/133859.diff" target="_blank">pFad v3 Proxy</a></p><p><a href="http://rainy.clevelandohioweatherforecast.com/pFad/v4index.php?u=https://patch-diff.githubusercontent.com/raw/python/cpython/pull/133859.diff" target="_blank">pFad v4 Proxy</a></p></body>
</html>