Skip to content

Commit 6fcb54d

Browse files
tannewttannewt
authored
Merge pull request adafruit#18 from turbinenreiter/master
Add Adalogger board definition in preparation of adding SD card support.
2 parents 46e7f8e + 9b1170a commit 6fcb54d

File tree

8 files changed

+492
-0
lines changed

8 files changed

+492
-0
lines changed

‎atmel-samd/boards/feather_m0_adalogger/conf_access.h

Lines changed: 115 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,115 @@
1+
/**
2+
* \file
3+
*
4+
* \brief Memory access control configuration file.
5+
*
6+
* Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
7+
*
8+
* \asf_license_start
9+
*
10+
* \page License
11+
*
12+
* Redistribution and use in source and binary forms, with or without
13+
* modification, are permitted provided that the following conditions are met:
14+
*
15+
* 1. Redistributions of source code must retain the above copyright notice,
16+
* this list of conditions and the following disclaimer.
17+
*
18+
* 2. Redistributions in binary form must reproduce the above copyright notice,
19+
* this list of conditions and the following disclaimer in the documentation
20+
* and/or other materials provided with the distribution.
21+
*
22+
* 3. The name of Atmel may not be used to endorse or promote products derived
23+
* from this software without specific prior written permission.
24+
*
25+
* 4. This software may only be redistributed and used in connection with an
26+
* Atmel microcontroller product.
27+
*
28+
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
29+
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
30+
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
31+
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
32+
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
33+
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
34+
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
35+
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
36+
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
37+
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
38+
* POSSIBILITY OF SUCH DAMAGE.
39+
*
40+
* \asf_license_stop
41+
*
42+
*/
43+
/*
44+
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
45+
*/
46+
47+
#ifndef _CONF_ACCESS_H_
48+
#define _CONF_ACCESS_H_
49+
50+
#include "compiler.h"
51+
#include "board.h"
52+
53+
54+
/*! \name Activation of Logical Unit Numbers
55+
*/
56+
//! @{
57+
#define LUN_0 ENABLE //!< On-Chip Virtual Memory.
58+
#define LUN_1 DISABLE //!< AT45DBX Data Flash.
59+
#define LUN_2 DISABLE //!< SD/MMC Card over SPI.
60+
#define LUN_3 DISABLE //!< SD/MMC Card over MCI Slot 0.
61+
#define LUN_4 DISABLE
62+
#define LUN_5 DISABLE
63+
#define LUN_6 DISABLE
64+
#define LUN_7 DISABLE
65+
#define LUN_USB DISABLE //!< Host Mass-Storage Memory.
66+
//! @}
67+
68+
/*! \name LUN 0 Definitions
69+
*/
70+
//! @{
71+
#define LUN_0_INCLUDE "rom_fs.h"
72+
#define Lun_0_test_unit_ready rom_fs_test_unit_ready
73+
#define Lun_0_read_capacity rom_fs_read_capacity
74+
#define Lun_0_unload NULL /* Can not be unloaded */
75+
#define Lun_0_wr_protect rom_fs_wr_protect
76+
#define Lun_0_removal rom_fs_removal
77+
#define Lun_0_usb_read_10 rom_fs_usb_read_10
78+
#define Lun_0_usb_write_10 rom_fs_usb_write_10
79+
#define LUN_0_NAME "\"On-Chip ROM\""
80+
//! @}
81+
82+
#define MEM_USB LUN_USB
83+
84+
/*! \name Actions Associated with Memory Accesses
85+
*
86+
* Write here the action to associate with each memory access.
87+
*
88+
* \warning Be careful not to waste time in order not to disturb the functions.
89+
*/
90+
//! @{
91+
#define memory_start_read_action(nb_sectors)
92+
#define memory_stop_read_action()
93+
#define memory_start_write_action(nb_sectors)
94+
#define memory_stop_write_action()
95+
//! @}
96+
97+
/*! \name Activation of Interface Features
98+
*/
99+
//! @{
100+
#define ACCESS_USB true //!< MEM <-> USB interface.
101+
#define ACCESS_MEM_TO_RAM false //!< MEM <-> RAM interface.
102+
#define ACCESS_STREAM false //!< Streaming MEM <-> MEM interface.
103+
#define ACCESS_STREAM_RECORD false //!< Streaming MEM <-> MEM interface in record mode.
104+
#define ACCESS_MEM_TO_MEM false //!< MEM <-> MEM interface.
105+
#define ACCESS_CODEC false //!< Codec interface.
106+
//! @}
107+
108+
/*! \name Specific Options for Access Control
109+
*/
110+
//! @{
111+
#define GLOBAL_WR_PROTECT false //!< Management of a global write protection.
112+
//! @}
113+
114+
115+
#endif // _CONF_ACCESS_H_

‎atmel-samd/boards/feather_m0_adalogger/conf_board.h

Lines changed: 14 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,14 @@
1+
/**
2+
* \file
3+
*
4+
* \brief User board configuration template
5+
*
6+
*/
7+
/*
8+
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
9+
*/
10+
11+
#ifndef CONF_BOARD_H
12+
#define CONF_BOARD_H
13+
14+
#endif // CONF_BOARD_H

‎atmel-samd/boards/feather_m0_adalogger/conf_usb.h

Lines changed: 150 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,150 @@
1+
2+
#include <stdbool.h>
3+
#include <stdint.h>
4+
5+
#ifndef CONF_USB_H_INCLUDED
6+
#define CONF_USB_H_INCLUDED
7+
8+
#define USB_DEVICE_MAJOR_VERSION 1
9+
#define USB_DEVICE_MINOR_VERSION 0
10+
#define USB_DEVICE_POWER 100 // Consumption on Vbus line (mA)
11+
#define USB_DEVICE_ATTR \
12+
(USB_CONFIG_ATTR_BUS_POWERED)
13+
// (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_SELF_POWERED)
14+
// (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_BUS_POWERED)
15+
16+
//! USB Device string definitions (Optional)
17+
#ifndef USB_DEVICE_MANUFACTURE_NAME
18+
# define USB_DEVICE_MANUFACTURE_NAME "Adafruit Industries"
19+
#endif
20+
21+
#ifndef USB_DEVICE_PRODUCT_NAME
22+
# define USB_DEVICE_PRODUCT_NAME "Feather M0 Adalogger"
23+
#endif
24+
25+
#define USB_DEVICE_GET_SERIAL_NAME_POINTER serial_number
26+
#define USB_DEVICE_GET_SERIAL_NAME_LENGTH 32
27+
extern char serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH];
28+
29+
//! Control endpoint size
30+
#define USB_DEVICE_EP_CTRL_SIZE 64
31+
32+
//! Two interfaces for this device (CDC COM + CDC DATA + MSC)
33+
#define USB_DEVICE_NB_INTERFACE 3
34+
35+
// (3 | USB_EP_DIR_IN) // CDC Notify endpoint
36+
// (4 | USB_EP_DIR_IN) // CDC TX
37+
// (5 | USB_EP_DIR_OUT) // CDC RX
38+
// (1 | USB_EP_DIR_IN) // MSC IN
39+
// (2 | USB_EP_DIR_OUT) // MSC OUT
40+
#define USB_DEVICE_MAX_EP 5
41+
42+
#define UDI_CDC_PORT_NB 1
43+
#define UDI_CDC_ENABLE_EXT(port) mp_cdc_enable(port)
44+
extern bool mp_cdc_enable(uint8_t port);
45+
#define UDI_CDC_DISABLE_EXT(port) mp_cdc_disable(port)
46+
extern void mp_cdc_disable(uint8_t port);
47+
#define UDI_CDC_LOW_RATE
48+
49+
#define UDI_CDC_DEFAULT_RATE 115200
50+
#define UDI_CDC_DEFAULT_STOPBITS CDC_STOP_BITS_1
51+
#define UDI_CDC_DEFAULT_PARITY CDC_PAR_NONE
52+
#define UDI_CDC_DEFAULT_DATABITS 8
53+
54+
#define UDI_CDC_RX_NOTIFY(port) usb_rx_notify()
55+
void usb_rx_notify(void);
56+
#define UDI_CDC_SET_CODING_EXT(port,cfg)
57+
#define UDI_CDC_SET_DTR_EXT(port,set)
58+
#define UDI_CDC_SET_RTS_EXT(port,set)
59+
60+
/**
61+
* USB CDC low level configuration
62+
* In standalone these configurations are defined by the CDC module.
63+
* For composite device, these configuration must be defined here
64+
* @{
65+
*/
66+
//! Endpoint numbers definition
67+
68+
#define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint
69+
#define UDI_CDC_DATA_EP_IN_0 (4 | USB_EP_DIR_IN) // TX
70+
#define UDI_CDC_DATA_EP_OUT_0 (5 | USB_EP_DIR_OUT) // RX
71+
72+
//! Interface numbers
73+
#define UDI_CDC_COMM_IFACE_NUMBER_0 0
74+
#define UDI_CDC_DATA_IFACE_NUMBER_0 1
75+
76+
/**
77+
* Configuration of MSC interface
78+
* @{
79+
*/
80+
//! Vendor name and Product version of MSC interface
81+
#define UDI_MSC_GLOBAL_VENDOR_ID \
82+
'A', 'T', 'M', 'E', 'L', ' ', ' ', ' '
83+
#define UDI_MSC_GLOBAL_PRODUCT_VERSION \
84+
'1', '.', '0', '0'
85+
86+
//! Interface callback definition
87+
#define UDI_MSC_ENABLE_EXT() mp_msc_enable()
88+
extern bool mp_msc_enable();
89+
#define UDI_MSC_DISABLE_EXT() mp_msc_disable()
90+
extern void mp_msc_disable();
91+
92+
//! Enable id string of interface to add an extra USB string
93+
#define UDI_MSC_STRING_ID 5
94+
95+
/**
96+
* USB MSC low level configuration
97+
* In standalone these configurations are defined by the MSC module.
98+
* For composite device, these configuration must be defined here
99+
* @{
100+
*/
101+
//! Endpoint numbers definition
102+
#define UDI_MSC_EP_IN (1 | USB_EP_DIR_IN)
103+
#define UDI_MSC_EP_OUT (2 | USB_EP_DIR_OUT)
104+
105+
//! Interface number
106+
#define UDI_MSC_IFACE_NUMBER 2
107+
108+
/**
109+
* Description of Composite Device
110+
* @{
111+
*/
112+
//! USB Interfaces descriptor structure
113+
#define UDI_COMPOSITE_DESC_T \
114+
usb_iad_desc_t udi_cdc_iad; \
115+
udi_cdc_comm_desc_t udi_cdc_comm; \
116+
udi_cdc_data_desc_t udi_cdc_data; \
117+
udi_msc_desc_t udi_msc
118+
119+
//! USB Interfaces descriptor value for Full Speed
120+
#define UDI_COMPOSITE_DESC_FS \
121+
.udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
122+
.udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
123+
.udi_cdc_data = UDI_CDC_DATA_DESC_0_FS, \
124+
.udi_msc = UDI_MSC_DESC_FS
125+
126+
//! USB Interfaces descriptor value for High Speed
127+
#define UDI_COMPOSITE_DESC_HS \
128+
.udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
129+
.udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
130+
.udi_cdc_data = UDI_CDC_DATA_DESC_0_HS, \
131+
.udi_msc = UDI_MSC_DESC_HS
132+
133+
//! USB Interface APIs
134+
#define UDI_COMPOSITE_API \
135+
&udi_api_cdc_comm, \
136+
&udi_api_cdc_data, \
137+
&udi_api_msc
138+
//@}
139+
140+
/**
141+
* USB Device Driver Configuration
142+
* @{
143+
*/
144+
//@}
145+
146+
//! The includes of classes and other headers must be done at the end of this file to avoid compile error
147+
#include "udi_cdc.h"
148+
#include "udi_msc.h"
149+
150+
#endif

‎atmel-samd/boards/feather_m0_adalogger/init.c

Lines changed: 20 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,20 @@
1+
/**
2+
* \file
3+
*
4+
* \brief User board initialization template
5+
*
6+
*/
7+
/*
8+
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
9+
*/
10+
11+
#include "board.h"
12+
#include "conf_board.h"
13+
14+
void board_init(void)
15+
{
16+
/* This function is meant to contain board-specific initialization code
17+
* for, e.g., the I/O pins. The initialization can rely on application-
18+
* specific board configuration, found in conf_board.h.
19+
*/
20+
}

‎atmel-samd/boards/feather_m0_adalogger/mpconfigboard.h

Lines changed: 7 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,7 @@
1+
// LEDs
2+
#define MICROPY_HW_LED1 PIN_PA17 // red
3+
// #define UART_REPL
4+
#define USB_REPL
5+
6+
#define MICROPY_HW_BOARD_NAME "Adafruit Feather M0 Adalogger"
7+
#define MICROPY_HW_MCU_NAME "samd21g18"

‎atmel-samd/boards/feather_m0_adalogger/mpconfigboard.mk

Lines changed: 3 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,3 @@
1+
LD_FILE = boards/samd21x18-bootloader.ld
2+
USB_VID = 0x239A
3+
USB_PID = 0x8015

0 commit comments

Comments
 (0)
pFad - Phonifier reborn

Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.

Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.


Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy