diff --git a/.gitattributes b/.gitattributes
new file mode 100644
index 00000000..fc0be872
--- /dev/null
+++ b/.gitattributes
@@ -0,0 +1,7 @@
+/.gitattributes export-ignore
+/.github/ export-ignore
+/.gitignore export-ignore
+/examples/ export-ignore
+/phpunit.xml.dist export-ignore
+/phpunit.xml.legacy export-ignore
+/tests/ export-ignore
diff --git a/.github/workflows/ci.yml b/.github/workflows/ci.yml
new file mode 100644
index 00000000..871d3f4e
--- /dev/null
+++ b/.github/workflows/ci.yml
@@ -0,0 +1,102 @@
+name: CI
+
+on:
+  push:
+  pull_request:
+
+jobs:
+  PHPUnit:
+    name: PHPUnit (PHP ${{ matrix.php }})
+    runs-on: ubuntu-24.04
+    strategy:
+      matrix:
+        php:
+          - 8.4
+          - 8.3
+          - 8.2
+          - 8.1
+          - 8.0
+          - 7.4
+          - 7.3
+          - 7.2
+          - 7.1
+    steps:
+      - uses: actions/checkout@v4
+      - uses: shivammathur/setup-php@v2
+        with:
+          php-version: ${{ matrix.php }}
+          coverage: ${{ matrix.php < 8.0 && 'xdebug' || 'pcov' }}
+          ini-file: development
+          ini-values: disable_functions='' # do not disable PCNTL functions on PHP < 8.1
+          extensions: sockets, pcntl, event, ${{ matrix.php < 8.0 && 'ev-1.1.5' || 'ev' }}
+        env:
+          fail-fast: true # fail step if any extension can not be installed
+      - run: composer install
+      - run: vendor/bin/phpunit --coverage-text
+        if: ${{ matrix.php >= 7.3 }}
+      - run: vendor/bin/phpunit --coverage-text -c phpunit.xml.legacy
+        if: ${{ matrix.php < 7.3 }}
+
+  PHPUnit-Unstable:
+    name: PHPUnit (Unstable PHP ${{ matrix.php }})
+    runs-on: ubuntu-24.04
+    continue-on-error: true
+    strategy:
+      matrix:
+        php:
+          - 8.3
+          - 8.2
+          - 8.1
+          - 8.0
+          - 7.4
+          - 7.3
+          - 7.2
+          - 7.1
+    steps:
+      - uses: actions/checkout@v4
+      - uses: shivammathur/setup-php@v2
+        with:
+          php-version: ${{ matrix.php }}
+          coverage: ${{ matrix.php < 8.0 && 'xdebug' || 'pcov' }}
+          ini-file: development
+          extensions: sockets, pcntl
+      - name: Install ext-uv
+        run: |
+          sudo apt-get update -q && sudo apt-get install libuv1-dev
+          echo "yes" | sudo pecl install ${{ matrix.php >= 8.0 && 'uv-0.3.0' || 'uv-0.2.4' }}
+          php -m | grep -q uv || echo "extension=uv.so" >> "$(php -r 'echo php_ini_loaded_file();')"
+      - run: composer install
+      - run: vendor/bin/phpunit --coverage-text
+        if: ${{ matrix.php >= 7.3 }}
+      - run: vendor/bin/phpunit --coverage-text -c phpunit.xml.legacy
+        if: ${{ matrix.php < 7.3 }}
+
+  PHPUnit-Windows:
+    name: PHPUnit (PHP ${{ matrix.php }} on Windows)
+    runs-on: windows-2022
+    continue-on-error: true
+    strategy:
+      matrix:
+        php:
+          - 8.4
+          - 8.3
+          - 8.2
+          - 8.1
+          - 8.0
+          - 7.4
+          - 7.3
+          - 7.2
+          - 7.1
+    steps:
+      - uses: actions/checkout@v4
+      - uses: shivammathur/setup-php@v2
+        with:
+          php-version: ${{ matrix.php }}
+          coverage: ${{ matrix.php < 8.0 && 'xdebug' || 'pcov' }}
+          ini-file: development
+          extensions: sockets,event # future: add uv-beta (installs, but can not load)
+      - run: composer install
+      - run: vendor/bin/phpunit --coverage-text
+        if: ${{ matrix.php >= 7.3 }}
+      - run: vendor/bin/phpunit --coverage-text -c phpunit.xml.legacy
+        if: ${{ matrix.php < 7.3 }}
diff --git a/.gitignore b/.gitignore
index 81b92580..5cf9a2cf 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1,3 +1,3 @@
-composer.lock
-phpunit.xml
-vendor
+/composer.lock
+/phpunit.xml
+/vendor/
diff --git a/.travis.yml b/.travis.yml
deleted file mode 100644
index a29daf2b..00000000
--- a/.travis.yml
+++ /dev/null
@@ -1,13 +0,0 @@
-language: php
-
-php:
-  - 5.4
-  - 5.5
-  - 5.6
-  - 7.0
-  - hhvm
-
-install: ./travis-init.sh
-
-script:
-  - ./vendor/bin/phpunit --coverage-text
diff --git a/CHANGELOG.md b/CHANGELOG.md
index 30787694..e634b12e 100644
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -1,5 +1,402 @@
 # Changelog
 
+## 1.5.0 (2023-11-13)
+
+*   Feature: Improve performance by using `spl_object_id()` on PHP 7.2+.
+    (#267 by @samsonasik)
+
+*   Feature: Full PHP 8.3 compatibility.
+    (#269 by @clue)
+
+*   Update tests for `ext-uv` on PHP 8+ and legacy PHP.
+    (#270 by @clue and #268 by @SimonFrings)
+
+## 1.4.0 (2023-05-05)
+
+*   Feature: Improve performance of `Loop` by avoiding unneeded method calls.
+    (#266 by @clue)
+
+*   Feature: Support checking `EINTR` constant from `ext-pcntl` without `ext-sockets`.
+    (#265 by @clue)
+
+*   Minor documentation improvements.
+    (#254 by @nhedger)
+
+*   Improve test suite, run tests on PHP 8.2 and report failed assertions.
+    (#258 by @WyriHaximus, #264 by @clue and #251, #261 and #262 by @SimonFrings)
+
+## 1.3.0 (2022-03-17)
+
+*   Feature: Improve default `StreamSelectLoop` to report any warnings for invalid streams.
+    (#245 by @clue)
+
+*   Feature: Improve performance of `StreamSelectLoop` when no timers are scheduled.
+    (#246 by @clue)
+
+*   Fix: Fix periodic timer with zero interval for `ExtEvLoop` and legacy `ExtLibevLoop`.
+    (#243 by @lucasnetau)
+
+*   Minor documentation improvements, update PHP version references.
+    (#240, #248 and #250 by @SimonFrings, #241 by @dbu and #249 by @clue)
+
+*   Improve test suite and test against PHP 8.1.
+    (#238 by @WyriHaximus and #242 by @clue)
+
+## 1.2.0 (2021-07-11)
+
+A major new feature release, see [**release announcement**](https://clue.engineering/2021/announcing-reactphp-default-loop).
+
+*   Feature: Introduce new concept of default loop with the new `Loop` class.
+    (#226 by @WyriHaximus, #229, #231 and #232 by @clue)
+
+    The `Loop` class exists as a convenient global accessor for the event loop.
+    It provides all methods that exist on the `LoopInterface` as static methods and
+    will automatically execute the loop at the end of the program:
+
+    ```php
+    $timer = Loop::addPeriodicTimer(0.1, function () {
+        echo 'Tick' . PHP_EOL;
+    });
+
+    Loop::addTimer(1.0, function () use ($timer) {
+        Loop::cancelTimer($timer);
+        echo 'Done' . PHP_EOL;
+    });
+    ```
+
+    The explicit loop instructions are still valid and may still be useful in some applications,
+    especially for a transition period towards the more concise style.
+    The `Loop::get()` method can be used to get the currently active event loop instance.
+
+    ```php
+    // deprecated
+    $loop = React\EventLoop\Factory::create();
+
+    // new
+    $loop = React\EventLoop\Loop::get();
+    ```
+
+*   Minor documentation improvements and mark legacy extensions as deprecated.
+    (#234 by @SimonFrings, #214 by @WyriHaximus and #233 and #235 by @nhedger)
+
+*   Improve test suite, use GitHub actions for continuous integration (CI),
+    update PHPUnit config and run tests on PHP 8.
+    (#212 and #215 by @SimonFrings and #230 by @clue)
+
+## 1.1.1 (2020-01-01)
+
+*   Fix: Fix reporting connection refused errors with `ExtUvLoop` on Linux and `StreamSelectLoop` on Windows.
+    (#207 and #208 by @clue)
+
+*   Fix: Fix unsupported EventConfig and `SEGFAULT` on shutdown with `ExtEventLoop` on Windows.
+    (#205 by @clue)
+
+*   Fix: Prevent interval overflow for timers very far in the future with `ExtUvLoop`.
+    (#196 by @PabloKowalczyk)
+
+*   Fix: Check PCNTL functions for signal support instead of PCNTL extension with `StreamSelectLoop`.
+    (#195 by @clue)
+
+*   Add `.gitattributes` to exclude dev files from exports.
+    (#201 by @reedy)
+
+*   Improve test suite to fix testing `ExtUvLoop` on Travis,
+    fix Travis CI builds, do not install `libuv` on legacy PHP setups,
+    fix failing test cases due to inaccurate timers,
+    run tests on Windows via Travis CI and
+    run tests on PHP 7.4 and simplify test matrix and test setup.
+    (#197 by @WyriHaximus and #202, #203, #204 and #209 by @clue)
+
+## 1.1.0 (2019-02-07)
+
+*   New UV based event loop (ext-uv).
+    (#112 by @WyriHaximus)
+
+*   Use high resolution timer on PHP 7.3+. 
+    (#182 by @clue)
+
+*   Improve PCNTL signals by using async signal dispatching if available. 
+    (#179 by @CharlotteDunois)
+
+*   Improve test suite and test suite set up.
+    (#174 by @WyriHaximus, #181 by @clue)
+
+*   Fix PCNTL signals edge case. 
+    (#183 by @clue)
+
+## 1.0.0 (2018-07-11)
+
+*   First stable LTS release, now following [SemVer](https://semver.org/).
+    We'd like to emphasize that this component is production ready and battle-tested.
+    We plan to support all long-term support (LTS) releases for at least 24 months,
+    so you have a rock-solid foundation to build on top of.
+
+>   Contains no other changes, so it's actually fully compatible with the v0.5.3 release.
+
+## 0.5.3 (2018-07-09)
+
+*   Improve performance by importing global functions.
+    (#167 by @Ocramius)
+
+*   Improve test suite by simplifying test bootstrap by using dev autoloader.
+    (#169 by @lcobucci)
+
+*   Minor internal changes to improved backward compatibility with PHP 5.3.
+    (#166 by @Donatello-za)
+
+## 0.5.2 (2018-04-24)
+
+*   Feature: Improve memory consumption and runtime performance for `StreamSelectLoop` timers.
+    (#164 by @clue)
+
+*   Improve test suite by removing I/O dependency at `StreamSelectLoopTest` to fix Mac OS X tests.
+    (#161 by @nawarian)
+
+## 0.5.1 (2018-04-09)
+
+*   Feature: New `ExtEvLoop` (PECL ext-ev)  (#148 by @kaduev13)
+
+## 0.5.0 (2018-04-05)
+
+A major feature release with a significant documentation overhaul and long overdue API cleanup!
+
+This update involves a number of BC breaks due to dropped support for deprecated
+functionality. We've tried hard to avoid BC breaks where possible and minimize
+impact otherwise. We expect that most consumers of this package will actually
+not be affected by any BC breaks, see below for more details.
+
+We realize that the changes listed below may seem overwhelming, but we've tried
+to be very clear about any possible BC breaks. Don't worry: In fact, all ReactPHP
+components are already compatible and support both this new release as well as
+providing backwards compatibility with the last release.
+
+*   Feature / BC break: Add support for signal handling via new
+    `LoopInterface::addSignal()` and `LoopInterface::removeSignal()` methods.
+    (#104 by @WyriHaximus and #111 and #150 by @clue)
+
+    ```php
+    $loop->addSignal(SIGINT, function () {
+        echo 'CTRL-C';
+    });
+    ```
+
+*   Feature: Significant documentation updates for `LoopInterface` and `Factory`.
+    (#100, #119, #126, #127, #159 and #160 by @clue, #113 by @WyriHaximus and #81 and #91 by @jsor)
+
+*   Feature: Add examples to ease getting started
+    (#99, #100 and #125 by @clue, #59 by @WyriHaximus and #143 by @jsor)
+
+*   Feature: Documentation for advanced timer concepts, such as monotonic time source vs wall-clock time
+    and high precision timers with millisecond accuracy or below.
+    (#130 and #157 by @clue)
+
+*   Feature: Documentation for advanced stream concepts, such as edge-triggered event listeners
+    and stream buffers and allow throwing Exception if stream resource is not supported.
+    (#129 and #158 by @clue)
+
+*   Feature: Throw `BadMethodCallException` on manual loop creation when required extension isn't installed.
+    (#153 by @WyriHaximus)
+
+*   Feature / BC break: First class support for legacy PHP 5.3 through PHP 7.2 and HHVM
+    and remove all `callable` type hints for consistency reasons.
+    (#141 and #151 by @clue)
+
+*   BC break: Documentation for timer API and clean up unneeded timer API.
+    (#102 by @clue)
+
+    Remove `TimerInterface::cancel()`, use `LoopInterface::cancelTimer()` instead:
+
+    ```php
+    // old (method invoked on timer instance)
+    $timer->cancel();
+    
+    // already supported before: invoke method on loop instance
+    $loop->cancelTimer($timer);
+    ```
+
+    Remove unneeded `TimerInterface::setData()` and `TimerInterface::getData()`,
+    use closure binding to add arbitrary data to timer instead:
+
+    ```php
+    // old (limited setData() and getData() only allows single variable)
+    $name = 'Tester';
+    $timer = $loop->addTimer(1.0, function ($timer) {
+        echo 'Hello ' . $timer->getData() . PHP_EOL;
+    });
+    $timer->setData($name);
+
+    // already supported before: closure binding allows any number of variables
+    $name = 'Tester';
+    $loop->addTimer(1.0, function () use ($name) {
+        echo 'Hello ' . $name . PHP_EOL;
+    });
+    ```
+
+    Remove unneeded `TimerInterface::getLoop()`, use closure binding instead:
+
+    ```php
+    // old (getLoop() called on timer instance)
+    $loop->addTimer(0.1, function ($timer) {
+        $timer->getLoop()->stop();
+    });
+
+    // already supported before: use closure binding as usual
+    $loop->addTimer(0.1, function () use ($loop) {
+        $loop->stop();
+    });
+    ```
+
+*   BC break: Remove unneeded `LoopInterface::isTimerActive()` and
+    `TimerInterface::isActive()` to reduce API surface.
+    (#133 by @clue)
+
+    ```php
+    // old (method on timer instance or on loop instance)
+    $timer->isActive();
+    $loop->isTimerActive($timer);
+    ```
+
+*   BC break: Move `TimerInterface` one level up to `React\EventLoop\TimerInterface`.
+    (#138 by @WyriHaximus)
+
+    ```php
+    // old (notice obsolete "Timer" namespace)
+    assert($timer instanceof React\EventLoop\Timer\TimerInterface);
+
+    // new
+    assert($timer instanceof React\EventLoop\TimerInterface);
+    ```
+
+*   BC break: Remove unneeded `LoopInterface::nextTick()` (and internal `NextTickQueue`),
+    use `LoopInterface::futureTick()` instead.
+    (#30 by @clue)
+
+    ```php
+    // old (removed)
+    $loop->nextTick(function () {
+        echo 'tick';
+    });
+
+    // already supported before
+    $loop->futureTick(function () {
+        echo 'tick';
+    });
+    ```
+
+*   BC break: Remove unneeded `$loop` argument for `LoopInterface::futureTick()`
+    (and fix internal cyclic dependency).
+    (#103 by @clue)
+
+    ```php
+    // old ($loop gets passed by default)
+    $loop->futureTick(function ($loop) {
+        $loop->stop();
+    });
+
+    // already supported before: use closure binding as usual
+    $loop->futureTick(function () use ($loop) {
+        $loop->stop();
+    });
+    ```
+
+*   BC break: Remove unneeded `LoopInterface::tick()`.
+    (#72 by @jsor)
+
+    ```php
+    // old (removed)
+    $loop->tick();
+
+    // suggested work around for testing purposes only
+    $loop->futureTick(function () use ($loop) {
+        $loop->stop();
+    });
+    ```
+
+*   BC break: Documentation for advanced stream API and clean up unneeded stream API.
+    (#110 by @clue)
+
+    Remove unneeded `$loop` argument for `LoopInterface::addReadStream()`
+    and `LoopInterface::addWriteStream()`, use closure binding instead:
+
+    ```php
+    // old ($loop gets passed by default)
+    $loop->addReadStream($stream, function ($stream, $loop) {
+        $loop->removeReadStream($stream);
+    });
+
+    // already supported before: use closure binding as usual
+    $loop->addReadStream($stream, function ($stream) use ($loop) {
+        $loop->removeReadStream($stream);
+    });
+    ```
+
+*   BC break: Remove unneeded `LoopInterface::removeStream()` method,
+    use `LoopInterface::removeReadStream()` and `LoopInterface::removeWriteStream()` instead.
+    (#118 by @clue)
+
+    ```php
+    // old
+    $loop->removeStream($stream);
+
+    // already supported before
+    $loop->removeReadStream($stream);
+    $loop->removeWriteStream($stream);
+    ```
+
+*   BC break: Rename `LibEventLoop` to `ExtLibeventLoop` and `LibEvLoop` to `ExtLibevLoop`
+    for consistent naming for event loop implementations.
+    (#128 by @clue)
+
+*   BC break: Remove optional `EventBaseConfig` argument from `ExtEventLoop`
+    and make its `FEATURE_FDS` enabled by default.
+    (#156 by @WyriHaximus)
+
+*   BC break: Mark all classes as final to discourage inheritance.
+    (#131 by @clue)
+
+*   Fix: Fix `ExtEventLoop` to keep track of stream resources (refcount)
+    (#123 by @clue)
+
+*   Fix: Ensure large timer interval does not overflow on 32bit systems
+    (#132 by @clue)
+
+*   Fix: Fix separately removing readable and writable side of stream when closing
+    (#139 by @clue)
+
+*   Fix: Properly clean up event watchers for `ext-event` and `ext-libev`
+    (#149 by @clue)
+
+*   Fix: Minor code cleanup and remove unneeded references
+    (#145 by @seregazhuk)
+
+*   Fix: Discourage outdated `ext-libevent` on PHP 7
+    (#62 by @cboden)
+
+*   Improve test suite by adding forward compatibility with PHPUnit 6 and PHPUnit 5,
+    lock Travis distro so new defaults will not break the build,
+    improve test suite to be less fragile and increase test timeouts,
+    test against PHP 7.2 and reduce fwrite() call length to one chunk.
+    (#106 and #144 by @clue, #120 and #124 by @carusogabriel, #147 by nawarian and #92 by @kelunik)
+
+*   A number of changes were originally planned for this release but have been backported
+    to the last `v0.4.3` already: #74, #76, #79, #81 (refs #65, #66, #67), #88 and #93
+
+## 0.4.3 (2017-04-27)
+
+* Bug fix: Bugfix in the usage sample code #57 (@dandelionred) 
+* Improvement: Remove branch-alias definition #53 (@WyriHaximus)
+* Improvement: StreamSelectLoop: Use fresh time so Timers added during stream events are accurate #51 (@andrewminerd)
+* Improvement: Avoid deprecation warnings in test suite due to deprecation of getMock() in PHPUnit #68 (@martinschroeder)
+* Improvement: Add PHPUnit 4.8 to require-dev #69 (@shaunbramley)
+* Improvement: Increase test timeouts for HHVM and unify timeout handling #70 (@clue)
+* Improvement: Travis improvements (backported from #74) #75 (@clue)
+* Improvement: Test suite now uses socket pairs instead of memory streams #66 (@martinschroeder)
+* Improvement: StreamSelectLoop: Test suite uses signal constant names in data provider #67 (@martinschroeder)
+* Improvement: ExtEventLoop: No longer suppress all errors #65 (@mamciek)
+* Improvement: Readme cleanup #89 (@jsor)
+* Improvement: Restructure and improve README #90 (@jsor)
+* Bug fix: StreamSelectLoop: Fix erroneous zero-time sleep (backport to 0.4) #94 (@jsor)
+
 ## 0.4.2 (2016-03-07)
 
 * Bug fix: No longer error when signals sent to StreamSelectLoop
@@ -12,10 +409,6 @@
 * Bug fix: null timeout in StreamSelectLoop causing 100% CPU usage (@clue)
 * Bug fix: v0.3.4 changes merged for v0.4.1
 
-## 0.3.4 (2014-03-30)
-
-* Changed StreamSelectLoop to use non-blocking behavior on tick() (@astephens25)
-
 ## 0.4.0 (2014-02-02)
 
 * Feature: Added `EventLoopInterface::nextTick()`, implemented in all event loops (@jmalloc)
@@ -26,6 +419,18 @@
 * BC break: New method: `EventLoopInterface::futureTick()`
 * Dependency: Autoloading and filesystem structure now PSR-4 instead of PSR-0
 
+## 0.3.5 (2016-12-28)
+
+This is a compatibility release that eases upgrading to the v0.4 release branch.
+You should consider upgrading to the v0.4 release branch.
+
+* Feature: Cap min timer interval at 1µs, thus improving compatibility with v0.4
+  (#47 by @clue)
+
+## 0.3.4 (2014-03-30)
+
+* Bug fix: Changed StreamSelectLoop to use non-blocking behavior on tick() (@astephens25)
+
 ## 0.3.3 (2013-07-08)
 
 * Bug fix: No error on removing non-existent streams (@clue)
diff --git a/LICENSE b/LICENSE
index a808108c..d6f8901f 100644
--- a/LICENSE
+++ b/LICENSE
@@ -1,4 +1,6 @@
-Copyright (c) 2012 Igor Wiedler, Chris Boden
+The MIT License (MIT)
+
+Copyright (c) 2012 Christian Lück, Cees-Jan Kiewiet, Jan Sorgalla, Chris Boden, Igor Wiedler
 
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal
diff --git a/README.md b/README.md
index d6f7da51..8394784f 100644
--- a/README.md
+++ b/README.md
@@ -1,68 +1,864 @@
-# EventLoop Component
+# EventLoop
 
-[![Build Status](https://secure.travis-ci.org/reactphp/event-loop.png?branch=master)](http://travis-ci.org/reactphp/event-loop) [![Code Climate](https://codeclimate.com/github/reactphp/event-loop/badges/gpa.svg)](https://codeclimate.com/github/reactphp/event-loop)
+[![CI status](https://github.com/reactphp/event-loop/actions/workflows/ci.yml/badge.svg)](https://github.com/reactphp/event-loop/actions)
+[![installs on Packagist](https://img.shields.io/packagist/dt/react/event-loop?color=blue&label=installs%20on%20Packagist)](https://packagist.org/packages/react/event-loop)
 
-Event loop abstraction layer that libraries can use for evented I/O.
+[ReactPHP](https://reactphp.org/)'s core reactor event loop that libraries can use for evented I/O.
+
+> **Development version:** This branch contains the code for the upcoming v3 
+> release. For the code of the current stable v1 release, check out the 
+> [`1.x` branch](https://github.com/reactphp/event-loop/tree/1.x).
+>
+> The upcoming v3 release will be the way forward for this package. However,
+> we will still actively support v1 for those not yet on the latest version. 
+> See also [installation instructions](#install) for more details.
 
 In order for async based libraries to be interoperable, they need to use the
 same event loop. This component provides a common `LoopInterface` that any
 library can target. This allows them to be used in the same loop, with one
-single `run` call that is controlled by the user.
+single [`run()`](#run) call that is controlled by the user.
+
+**Table of contents**
+
+* [Quickstart example](#quickstart-example)
+* [Usage](#usage)
+    * [Loop](#loop)
+        * [Loop methods](#loop-methods)
+        * [Loop autorun](#loop-autorun)
+        * [get()](#get)
+    * [Loop implementations](#loop-implementations)
+        * [StreamSelectLoop](#streamselectloop)
+        * [ExtEventLoop](#exteventloop)
+        * [ExtEvLoop](#extevloop)
+        * [ExtUvLoop](#extuvloop)
+    * [LoopInterface](#loopinterface)
+        * [run()](#run)
+        * [stop()](#stop)
+        * [addTimer()](#addtimer)
+        * [addPeriodicTimer()](#addperiodictimer)
+        * [cancelTimer()](#canceltimer)
+        * [futureTick()](#futuretick)
+        * [addSignal()](#addsignal)
+        * [removeSignal()](#removesignal)
+        * [addReadStream()](#addreadstream)
+        * [addWriteStream()](#addwritestream)
+        * [removeReadStream()](#removereadstream)
+        * [removeWriteStream()](#removewritestream)
+* [Install](#install)
+* [Tests](#tests)
+* [License](#license)
+* [More](#more)
+
+## Quickstart example
+
+Here is an async HTTP server built with just the event loop.
+
+```php
+<?php
+
+use React\EventLoop\Loop;
+
+require __DIR__ . '/vendor/autoload.php';
+
+$server = stream_socket_server('tcp://127.0.0.1:8080');
+stream_set_blocking($server, false);
+
+Loop::addReadStream($server, function ($server) {
+    $conn = stream_socket_accept($server);
+    $data = "HTTP/1.1 200 OK\r\nContent-Length: 3\r\n\r\nHi\n";
+    Loop::addWriteStream($conn, function ($conn) use (&$data) {
+        $written = fwrite($conn, $data);
+        if ($written === strlen($data)) {
+            fclose($conn);
+            Loop::removeWriteStream($conn);
+        } else {
+            $data = substr($data, $written);
+        }
+    });
+});
+
+Loop::addPeriodicTimer(5, function () {
+    $memory = memory_get_usage() / 1024;
+    $formatted = number_format($memory, 3).'K';
+    echo "Current memory usage: {$formatted}\n";
+});
+```
+
+See also the [examples](examples).
+
+## Usage
+
+Typical applications would use the [`Loop` class](#loop) to use the default
+event loop like this:
+
+```php
+use React\EventLoop\Loop;
+
+$timer = Loop::addPeriodicTimer(0.1, function () {
+    echo 'Tick' . PHP_EOL;
+});
+
+Loop::addTimer(1.0, function () use ($timer) {
+    Loop::cancelTimer($timer);
+    echo 'Done' . PHP_EOL;
+});
+```
+
+As an alternative, you can also explicitly create an event loop instance at the
+beginning, reuse it throughout your program and finally run it at the end of the
+program like this:
+
+```php
+$loop = React\EventLoop\Loop::get();
+
+$timer = $loop->addPeriodicTimer(0.1, function () {
+    echo 'Tick' . PHP_EOL;
+});
+
+$loop->addTimer(1.0, function () use ($loop, $timer) {
+    $loop->cancelTimer($timer);
+    echo 'Done' . PHP_EOL;
+});
+
+$loop->run();
+```
+
+While the former is more concise, the latter is more explicit.
+In both cases, the program would perform the exact same steps.
+
+1. The event loop instance is created at the beginning of the program. This is
+   implicitly done the first time you call the [`Loop` class](#loop)
+   (or by manually instantiating any of the [loop implementations](#loop-implementations)).
+2. The event loop is used directly or passed as an instance to library and
+   application code. In this example, a periodic timer is registered with the
+   event loop which simply outputs `Tick` every fraction of a second until another
+   timer stops the periodic timer after a second.
+3. The event loop is run at the end of the program. This is automatically done
+   when using the [`Loop` class](#loop) or explicitly with a single [`run()`](#run)
+   call at the end of the program.
+
+As of `v1.2.0`, we highly recommend using the [`Loop` class](#loop).
+The explicit loop instructions are still valid and may still be useful in some
+applications, especially for a transition period towards the more concise style.
+
+### Loop
+
+The `Loop` class exists as a convenient global accessor for the event loop.
+
+#### Loop methods
+
+The `Loop` class provides all methods that exist on the [`LoopInterface`](#loopinterface)
+as static methods:
+
+* [run()](#run)
+* [stop()](#stop)
+* [addTimer()](#addtimer)
+* [addPeriodicTimer()](#addperiodictimer)
+* [cancelTimer()](#canceltimer)
+* [futureTick()](#futuretick)
+* [addSignal()](#addsignal)
+* [removeSignal()](#removesignal)
+* [addReadStream()](#addreadstream)
+* [addWriteStream()](#addwritestream)
+* [removeReadStream()](#removereadstream)
+* [removeWriteStream()](#removewritestream)
+
+If you're working with the event loop in your application code, it's often
+easiest to directly interface with the static methods defined on the `Loop` class
+like this:
+
+```php
+use React\EventLoop\Loop;
+
+$timer = Loop::addPeriodicTimer(0.1, function () {
+    echo 'Tick' . PHP_EOL;
+});
+
+Loop::addTimer(1.0, function () use ($timer) {
+    Loop::cancelTimer($timer);
+    echo 'Done' . PHP_EOL;
+});
+```
+
+On the other hand, if you're familiar with object-oriented programming (OOP) and
+dependency injection (DI), you may want to inject an event loop instance and
+invoke instance methods on the `LoopInterface` like this:
+
+```php
+use React\EventLoop\Loop;
+use React\EventLoop\LoopInterface;
+
+class Greeter
+{
+    private $loop;
+
+    public function __construct(LoopInterface $loop)
+    {
+        $this->loop = $loop;
+    }
+
+    public function greet(string $name)
+    {
+        $this->loop->addTimer(1.0, function () use ($name) {
+            echo 'Hello ' . $name . '!' . PHP_EOL;
+        });
+    }
+}
+
+$greeter = new Greeter(Loop::get());
+$greeter->greet('Alice');
+$greeter->greet('Bob');
+```
+
+Each static method call will be forwarded as-is to the underlying event loop
+instance by using the [`Loop::get()`](#get) call internally.
+See [`LoopInterface`](#loopinterface) for more details about available methods.
+
+#### Loop autorun
+
+When using the `Loop` class, it will automatically execute the loop at the end of
+the program. This means the following example will schedule a timer and will
+automatically execute the program until the timer event fires:
+
+```php
+use React\EventLoop\Loop;
+
+Loop::addTimer(1.0, function () {
+    echo 'Hello' . PHP_EOL;
+});
+```
+
+As of `v1.2.0`, we highly recommend using the `Loop` class this way and omitting any
+explicit [`run()`](#run) calls. For BC reasons, the explicit [`run()`](#run)
+method is still valid and may still be useful in some applications, especially
+for a transition period towards the more concise style.
 
-In addition to the interface there are some implementations provided:
+If you don't want the `Loop` to run automatically, you can either explicitly
+[`run()`](#run) or [`stop()`](#stop) it. This can be useful if you're using
+a global exception handler like this:
 
-* `StreamSelectLoop`: This is the only implementation which works out of the
-  box with PHP. It does a simple `select` system call. It's not the most
-  performant of loops, but still does the job quite well.
+```php
+use React\EventLoop\Loop;
+
+Loop::addTimer(10.0, function () {
+    echo 'Never happens';
+});
+
+set_exception_handler(function (Throwable $e) {
+    echo 'Error: ' . $e->getMessage() . PHP_EOL;
+    Loop::stop();
+});
+
+throw new RuntimeException('Demo');
+```
+
+#### get()
+
+The `get(): LoopInterface` method can be used to
+get the currently active event loop instance.
+
+This method will always return the same event loop instance throughout the
+lifetime of your application.
 
-* `LibEventLoop`: This uses the `libevent` pecl extension. `libevent` itself
-  supports a number of system-specific backends (epoll, kqueue).
+```php
+use React\EventLoop\Loop;
+use React\EventLoop\LoopInterface;
+
+$loop = Loop::get();
+
+assert($loop instanceof LoopInterface);
+assert($loop === Loop::get());
+```
 
-* `LibEvLoop`: This uses the `libev` pecl extension
-  ([github](https://github.com/m4rw3r/php-libev)). It supports the same
-  backends as libevent.
+This is particularly useful if you're using object-oriented programming (OOP)
+and dependency injection (DI). In this case, you may want to inject an event
+loop instance and invoke instance methods on the `LoopInterface` like this:
 
-* `ExtEventLoop`: This uses the `event` pecl extension. It supports the same
-  backends as libevent.
+```php
+use React\EventLoop\Loop;
+use React\EventLoop\LoopInterface;
+
+class Greeter
+{
+    private $loop;
 
-All of the loops support these features:
+    public function __construct(LoopInterface $loop)
+    {
+        $this->loop = $loop;
+    }
+
+    public function greet(string $name)
+    {
+        $this->loop->addTimer(1.0, function () use ($name) {
+            echo 'Hello ' . $name . '!' . PHP_EOL;
+        });
+    }
+}
+
+$greeter = new Greeter(Loop::get());
+$greeter->greet('Alice');
+$greeter->greet('Bob');
+```
+
+See [`LoopInterface`](#loopinterface) for more details about available methods.
+
+### Loop implementations
+
+In addition to the [`LoopInterface`](#loopinterface), there are a number of
+event loop implementations provided.
+
+All of the event loops support these features:
 
 * File descriptor polling
 * One-off timers
 * Periodic timers
-* Deferred execution of callbacks
+* Deferred execution on future loop tick
 
-## Usage
+For most consumers of this package, the underlying event loop implementation is
+an implementation detail.
+You should use the [`Loop` class](#loop) to automatically create a new instance.
+
+Advanced! If you explicitly need a certain event loop implementation, you can
+manually instantiate one of the following classes.
+Note that you may have to install the required PHP extensions for the respective
+event loop implementation first or they will throw a `BadMethodCallException` on creation.
+
+#### StreamSelectLoop
+
+A `stream_select()` based event loop.
+
+This uses the [`stream_select()`](https://www.php.net/manual/en/function.stream-select.php)
+function and is the only implementation that works out of the box with PHP.
+
+This event loop works out of the box on any PHP version.
+This means that no installation is required and this library works on all
+platforms and supported PHP versions.
+Accordingly, the [`Loop` class](#loop) will use this event loop by default if
+you do not install any of the event loop extensions listed below.
+
+Under the hood, it does a simple `select` system call.
+This system call is limited to the maximum file descriptor number of
+`FD_SETSIZE` (platform dependent, commonly 1024) and scales with `O(m)`
+(`m` being the maximum file descriptor number passed).
+This means that you may run into issues when handling thousands of streams
+concurrently and you may want to look into using one of the alternative
+event loop implementations listed below in this case.
+If your use case is among the many common use cases that involve handling only
+dozens or a few hundred streams at once, then this event loop implementation
+performs really well.
+
+If you want to use signal handling (see also [`addSignal()`](#addsignal) below),
+this event loop implementation requires `ext-pcntl`.
+This extension is only available for Unix-like platforms and does not support
+Windows.
+It is commonly installed as part of many PHP distributions.
+If this extension is missing (or you're running on Windows), signal handling is
+not supported and throws a `BadMethodCallException` instead.
+
+This event loop is known to rely on wall-clock time to schedule future timers
+when using any version before PHP 7.3, because a monotonic time source is
+only available as of PHP 7.3 (`hrtime()`).
+While this does not affect many common use cases, this is an important
+distinction for programs that rely on a high time precision or on systems
+that are subject to discontinuous time adjustments (time jumps).
+This means that if you schedule a timer to trigger in 30s on PHP < 7.3 and
+then adjust your system time forward by 20s, the timer may trigger in 10s.
+See also [`addTimer()`](#addtimer) for more details.
+
+#### ExtEventLoop
+
+An `ext-event` based event loop.
+
+This uses the [`event` PECL extension](https://pecl.php.net/package/event),
+that provides an interface to `libevent` library.
+`libevent` itself supports a number of system-specific backends (epoll, kqueue).
+
+This loop is known to work with PHP 7.1 through PHP 8+.
+
+#### ExtEvLoop
+
+An `ext-ev` based event loop.
+
+This loop uses the [`ev` PECL extension](https://pecl.php.net/package/ev),
+that provides an interface to `libev` library.
+`libev` itself supports a number of system-specific backends (epoll, kqueue).
+
+
+This loop is known to work with PHP 7.1 through PHP 8+.
+
+#### ExtUvLoop
+
+An `ext-uv` based event loop.
+
+This loop uses the [`uv` PECL extension](https://pecl.php.net/package/uv),
+that provides an interface to `libuv` library.
+`libuv` itself supports a number of system-specific backends (epoll, kqueue).
+
+This loop is known to work with PHP 7.1 through PHP 8+.
+
+### LoopInterface
+
+#### run()
+
+The `run(): void` method can be used to
+run the event loop until there are no more tasks to perform.
+
+For many applications, this method is the only directly visible
+invocation on the event loop.
+As a rule of thumb, it is usually recommended to attach everything to the
+same loop instance and then run the loop once at the bottom end of the
+application.
 
-Here is an async HTTP server built with just the event loop.
 ```php
-    $loop = React\EventLoop\Factory::create();
-
-    $server = stream_socket_server('tcp://127.0.0.1:8080');
-    stream_set_blocking($server, 0);
-    $loop->addReadStream($server, function ($server) use ($loop) {
-        $conn = stream_socket_accept($server);
-        $data = "HTTP/1.1 200 OK\r\nContent-Length: 3\r\n\r\nHi\n";
-        $loop->addWriteStream($conn, function ($conn) use (&$data, $loop) {
-            $written = fwrite($conn, $data);
-            if ($written === strlen($data)) {
-                fclose($conn);
-                $loop->removeStream($conn);
-            } else {
-                $data = substr($data, $written);
-            }
-        });
+$loop->run();
+```
+
+This method will keep the loop running until there are no more tasks
+to perform. In other words: This method will block until the last
+timer, stream and/or signal has been removed.
+
+Likewise, it is imperative to ensure the application actually invokes
+this method once. Adding listeners to the loop and missing to actually
+run it will result in the application exiting without actually waiting
+for any of the attached listeners.
+
+This method MUST NOT be called while the loop is already running.
+This method MAY be called more than once after it has explicitly been
+[`stop()`ped](#stop) or after it automatically stopped because it
+previously did no longer have anything to do.
+
+#### stop()
+
+The `stop(): void` method can be used to
+instruct a running event loop to stop.
+
+This method is considered advanced usage and should be used with care.
+As a rule of thumb, it is usually recommended to let the loop stop
+only automatically when it no longer has anything to do.
+
+This method can be used to explicitly instruct the event loop to stop:
+
+```php
+$loop->addTimer(3.0, function () use ($loop) {
+    $loop->stop();
+});
+```
+
+Calling this method on a loop instance that is not currently running or
+on a loop instance that has already been stopped has no effect.
+
+#### addTimer()
+
+The `addTimer(float $interval, callable $callback): TimerInterface` method can be used to
+enqueue a callback to be invoked once after the given interval.
+
+The second parameter MUST be a timer callback function that accepts
+the timer instance as its only parameter.
+If you don't use the timer instance inside your timer callback function
+you MAY use a function which has no parameters at all.
+
+The timer callback function MUST NOT throw an `Exception`.
+The return value of the timer callback function will be ignored and has
+no effect, so for performance reasons you're recommended to not return
+any excessive data structures.
+
+This method returns a timer instance. The same timer instance will also be 
+passed into the timer callback function as described above.
+You can invoke [`cancelTimer`](#canceltimer) to cancel a pending timer.
+Unlike [`addPeriodicTimer()`](#addperiodictimer), this method will ensure
+the callback will be invoked only once after the given interval.
+
+```php
+$loop->addTimer(0.8, function () {
+    echo 'world!' . PHP_EOL;
+});
+
+$loop->addTimer(0.3, function () {
+    echo 'hello ';
+});
+```
+
+See also [example #1](examples).
+
+If you want to access any variables within your callback function, you
+can bind arbitrary data to a callback closure like this:
+
+```php
+function hello($name, LoopInterface $loop)
+{
+    $loop->addTimer(1.0, function () use ($name) {
+        echo "hello $name\n";
+    });
+}
+
+hello('Tester', $loop);
+```
+
+This interface does not enforce any particular timer resolution, so
+special care may have to be taken if you rely on very high precision with
+millisecond accuracy or below. Event loop implementations SHOULD work on
+a best effort basis and SHOULD provide at least millisecond accuracy
+unless otherwise noted. Many existing event loop implementations are
+known to provide microsecond accuracy, but it's generally not recommended
+to rely on this high precision.
+
+Similarly, the execution order of timers scheduled to execute at the
+same time (within its possible accuracy) is not guaranteed.
+
+This interface suggests that event loop implementations SHOULD use a
+monotonic time source if available. Given that a monotonic time source is
+only available as of PHP 7.3 by default, event loop implementations MAY
+fall back to using wall-clock time.
+While this does not affect many common use cases, this is an important
+distinction for programs that rely on a high time precision or on systems
+that are subject to discontinuous time adjustments (time jumps).
+This means that if you schedule a timer to trigger in 30s and then adjust
+your system time forward by 20s, the timer SHOULD still trigger in 30s.
+See also [event loop implementations](#loop-implementations) for more details.
+
+#### addPeriodicTimer()
+
+The `addPeriodicTimer(float $interval, callable $callback): TimerInterface` method can be used to
+enqueue a callback to be invoked repeatedly after the given interval.
+
+The second parameter MUST be a timer callback function that accepts
+the timer instance as its only parameter.
+If you don't use the timer instance inside your timer callback function
+you MAY use a function which has no parameters at all.
+
+The timer callback function MUST NOT throw an `Exception`.
+The return value of the timer callback function will be ignored and has
+no effect, so for performance reasons you're recommended to not return
+any excessive data structures.
+
+This method returns a timer instance. The same timer instance will also be 
+passed into the timer callback function as described above.
+Unlike [`addTimer()`](#addtimer), this method will ensure the callback 
+will be invoked infinitely after the given interval or until you invoke 
+[`cancelTimer`](#canceltimer).
+
+```php
+$timer = $loop->addPeriodicTimer(0.1, function () {
+    echo 'tick!' . PHP_EOL;
+});
+
+$loop->addTimer(1.0, function () use ($loop, $timer) {
+    $loop->cancelTimer($timer);
+    echo 'Done' . PHP_EOL;
+});
+```
+
+See also [example #2](examples).
+
+If you want to limit the number of executions, you can bind
+arbitrary data to a callback closure like this:
+
+```php
+function hello($name, LoopInterface $loop)
+{
+    $n = 3;
+    $loop->addPeriodicTimer(1.0, function ($timer) use ($name, $loop, &$n) {
+        if ($n > 0) {
+            --$n;
+            echo "hello $name\n";
+        } else {
+            $loop->cancelTimer($timer);
+        }
     });
+}
+
+hello('Tester', $loop);
+```
+
+This interface does not enforce any particular timer resolution, so
+special care may have to be taken if you rely on very high precision with
+millisecond accuracy or below. Event loop implementations SHOULD work on
+a best effort basis and SHOULD provide at least millisecond accuracy
+unless otherwise noted. Many existing event loop implementations are
+known to provide microsecond accuracy, but it's generally not recommended
+to rely on this high precision.
+
+Similarly, the execution order of timers scheduled to execute at the
+same time (within its possible accuracy) is not guaranteed.
+
+This interface suggests that event loop implementations SHOULD use a
+monotonic time source if available. Given that a monotonic time source is
+only available as of PHP 7.3 by default, event loop implementations MAY
+fall back to using wall-clock time.
+While this does not affect many common use cases, this is an important
+distinction for programs that rely on a high time precision or on systems
+that are subject to discontinuous time adjustments (time jumps).
+This means that if you schedule a timer to trigger in 30s and then adjust
+your system time forward by 20s, the timer SHOULD still trigger in 30s.
+See also [event loop implementations](#loop-implementations) for more details.
+
+Additionally, periodic timers may be subject to timer drift due to
+re-scheduling after each invocation. As such, it's generally not
+recommended to rely on this for high precision intervals with millisecond
+accuracy or below.
+
+#### cancelTimer()
+
+The `cancelTimer(TimerInterface $timer): void` method can be used to
+cancel a pending timer.
+
+See also [`addPeriodicTimer()`](#addperiodictimer) and [example #2](examples).
+
+Calling this method on a timer instance that has not been added to this
+loop instance or on a timer that has already been cancelled has no effect.
+
+#### futureTick()
+
+The `futureTick(callable $listener): void` method can be used to
+schedule a callback to be invoked on a future tick of the event loop.
+
+This works very much similar to timers with an interval of zero seconds,
+but does not require the overhead of scheduling a timer queue.
+
+The tick callback function MUST be able to accept zero parameters.
+
+The tick callback function MUST NOT throw an `Exception`.
+The return value of the tick callback function will be ignored and has
+no effect, so for performance reasons you're recommended to not return
+any excessive data structures.
 
-    $loop->addPeriodicTimer(5, function () {
-        $memory = memory_get_usage() / 1024;
-        $formatted = number_format($memory, 3).'K';
-        echo "Current memory usage: {$formatted}\n";
+If you want to access any variables within your callback function, you
+can bind arbitrary data to a callback closure like this:
+
+```php
+function hello($name, LoopInterface $loop)
+{
+    $loop->futureTick(function () use ($name) {
+        echo "hello $name\n";
     });
+}
+
+hello('Tester', $loop);
+```
+
+Unlike timers, tick callbacks are guaranteed to be executed in the order
+they are enqueued.
+Also, once a callback is enqueued, there's no way to cancel this operation.
+
+This is often used to break down bigger tasks into smaller steps (a form
+of cooperative multitasking).
+
+```php
+$loop->futureTick(function () {
+    echo 'b';
+});
+$loop->futureTick(function () {
+    echo 'c';
+});
+echo 'a';
+```
+
+See also [example #3](examples).
+
+#### addSignal()
+
+The `addSignal(int $signal, callable $listener): void` method can be used to
+register a listener to be notified when a signal has been caught by this process.
+
+This is useful to catch user interrupt signals or shutdown signals from
+tools like `supervisor` or `systemd`.
+
+The second parameter MUST be a listener callback function that accepts
+the signal as its only parameter.
+If you don't use the signal inside your listener callback function
+you MAY use a function which has no parameters at all.
+
+The listener callback function MUST NOT throw an `Exception`.
+The return value of the listener callback function will be ignored and has
+no effect, so for performance reasons you're recommended to not return
+any excessive data structures.
 
-    $loop->run();
+```php
+$loop->addSignal(SIGINT, function (int $signal) {
+    echo 'Caught user interrupt signal' . PHP_EOL;
+});
+```
+
+See also [example #4](examples).
+
+Signaling is only available on Unix-like platforms, Windows isn't
+supported due to operating system limitations.
+This method may throw a `BadMethodCallException` if signals aren't
+supported on this platform, for example when required extensions are
+missing.
+
+**Note: A listener can only be added once to the same signal, any
+attempts to add it more than once will be ignored.**
+
+#### removeSignal()
+
+The `removeSignal(int $signal, callable $listener): void` method can be used to
+remove a previously added signal listener.
+
+```php
+$loop->removeSignal(SIGINT, $listener);
+```
+
+Any attempts to remove listeners that aren't registered will be ignored.
+
+#### addReadStream()
+
+> Advanced! Note that this low-level API is considered advanced usage.
+  Most use cases should probably use the higher-level
+  [readable Stream API](https://github.com/reactphp/stream#readablestreaminterface)
+  instead.
+
+The `addReadStream(resource $stream, callable $callback): void` method can be used to
+register a listener to be notified when a stream is ready to read.
+
+The first parameter MUST be a valid stream resource that supports
+checking whether it is ready to read by this loop implementation.
+A single stream resource MUST NOT be added more than once.
+Instead, either call [`removeReadStream()`](#removereadstream) first or
+react to this event with a single listener and then dispatch from this
+listener. This method MAY throw an `Exception` if the given resource type
+is not supported by this loop implementation.
+
+The second parameter MUST be a listener callback function that accepts
+the stream resource as its only parameter.
+If you don't use the stream resource inside your listener callback function
+you MAY use a function which has no parameters at all.
+
+The listener callback function MUST NOT throw an `Exception`.
+The return value of the listener callback function will be ignored and has
+no effect, so for performance reasons you're recommended to not return
+any excessive data structures.
+
+If you want to access any variables within your callback function, you
+can bind arbitrary data to a callback closure like this:
+
+```php
+$loop->addReadStream($stream, function ($stream) use ($name) {
+    echo $name . ' said: ' . fread($stream);
+});
+```
+
+See also [example #11](examples).
+
+You can invoke [`removeReadStream()`](#removereadstream) to remove the
+read event listener for this stream.
+
+The execution order of listeners when multiple streams become ready at
+the same time is not guaranteed.
+
+Some event loop implementations are known to only trigger the listener if
+the stream *becomes* readable (edge-triggered) and may not trigger if the
+stream has already been readable from the beginning.
+This also implies that a stream may not be recognized as readable when data
+is still left in PHP's internal stream buffers.
+As such, it's recommended to use `stream_set_read_buffer($stream, 0);`
+to disable PHP's internal read buffer in this case.
+
+#### addWriteStream()
+
+> Advanced! Note that this low-level API is considered advanced usage.
+  Most use cases should probably use the higher-level
+  [writable Stream API](https://github.com/reactphp/stream#writablestreaminterface)
+  instead.
+
+The `addWriteStream(resource $stream, callable $callback): void` method can be used to
+register a listener to be notified when a stream is ready to write.
+
+The first parameter MUST be a valid stream resource that supports
+checking whether it is ready to write by this loop implementation.
+A single stream resource MUST NOT be added more than once.
+Instead, either call [`removeWriteStream()`](#removewritestream) first or
+react to this event with a single listener and then dispatch from this
+listener. This method MAY throw an `Exception` if the given resource type
+is not supported by this loop implementation.
+
+The second parameter MUST be a listener callback function that accepts
+the stream resource as its only parameter.
+If you don't use the stream resource inside your listener callback function
+you MAY use a function which has no parameters at all.
+
+The listener callback function MUST NOT throw an `Exception`.
+The return value of the listener callback function will be ignored and has
+no effect, so for performance reasons you're recommended to not return
+any excessive data structures.
+
+If you want to access any variables within your callback function, you
+can bind arbitrary data to a callback closure like this:
+
+```php
+$loop->addWriteStream($stream, function ($stream) use ($name) {
+    fwrite($stream, 'Hello ' . $name);
+});
 ```
-**Note:** The factory is just for convenience. It tries to pick the best
-available implementation. Libraries `SHOULD` allow the user to inject an
-instance of the loop. They `MAY` use the factory when the user did not supply
-a loop.
+
+See also [example #12](examples).
+
+You can invoke [`removeWriteStream()`](#removewritestream) to remove the
+write event listener for this stream.
+
+The execution order of listeners when multiple streams become ready at
+the same time is not guaranteed.
+
+#### removeReadStream()
+
+The `removeReadStream(resource $stream): void` method can be used to
+remove the read event listener for the given stream.
+
+Removing a stream from the loop that has already been removed or trying
+to remove a stream that was never added or is invalid has no effect.
+
+#### removeWriteStream()
+
+The `removeWriteStream(resource $stream): void` method can be used to
+remove the write event listener for the given stream.
+
+Removing a stream from the loop that has already been removed or trying
+to remove a stream that was never added or is invalid has no effect.
+
+## Install
+
+The recommended way to install this library is [through Composer](https://getcomposer.org/).
+[New to Composer?](https://getcomposer.org/doc/00-intro.md)
+
+Once released, this project will follow [SemVer](https://semver.org/).
+At the moment, this will install the latest development version:
+
+```bash
+composer require react/event-loop:^3@dev
+```
+
+See also the [CHANGELOG](CHANGELOG.md) for details about version upgrades.
+
+This project aims to run on any platform and thus does not require any PHP
+extensions and supports running on PHP 7.1 through current PHP 8+.
+It's *highly recommended to use the latest supported PHP version* for this project.
+
+Installing any of the event loop extensions is suggested, but entirely optional.
+See also [event loop implementations](#loop-implementations) for more details.
+
+## Tests
+
+To run the test suite, you first need to clone this repo and then install all
+dependencies [through Composer](https://getcomposer.org/):
+
+```bash
+composer install
+```
+
+To run the test suite, go to the project root and run:
+
+```bash
+vendor/bin/phpunit
+```
+
+## License
+
+MIT, see [LICENSE file](LICENSE).
+
+## More
+
+* See our [Stream component](https://github.com/reactphp/stream) for more
+  information on how streams are used in real-world applications.
+* See our [users wiki](https://github.com/reactphp/react/wiki/Users) and the
+  [dependents on Packagist](https://packagist.org/packages/react/event-loop/dependents)
+  for a list of packages that use the EventLoop in real-world applications.
diff --git a/composer.json b/composer.json
index 5001a9c8..6d31e81d 100644
--- a/composer.json
+++ b/composer.json
@@ -1,22 +1,47 @@
 {
     "name": "react/event-loop",
-    "description": "Event loop abstraction layer that libraries can use for evented I/O.",
+    "description": "ReactPHP's core reactor event loop that libraries can use for evented I/O.",
     "keywords": ["event-loop", "asynchronous"],
     "license": "MIT",
+    "authors": [
+        {
+            "name": "Christian Lück",
+            "homepage": "https://clue.engineering/",
+            "email": "christian@clue.engineering"
+        },
+        {
+            "name": "Cees-Jan Kiewiet",
+            "homepage": "https://wyrihaximus.net/",
+            "email": "reactphp@ceesjankiewiet.nl"
+        },
+        {
+            "name": "Jan Sorgalla",
+            "homepage": "https://sorgalla.com/",
+            "email": "jsorgalla@gmail.com"
+        },
+        {
+            "name": "Chris Boden",
+            "homepage": "https://cboden.dev/",
+            "email": "cboden@gmail.com"
+        }
+    ],
     "require": {
-        "php": ">=5.4.0"
+        "php": ">=7.1"
     },
     "require-dev": {
-        "phpunit/phpunit": "~4.8"
+        "phpunit/phpunit": "^9.6 || ^7.5"
     },
     "suggest": {
-        "ext-libevent": ">=0.1.0",
-        "ext-event": "~1.0",
-        "ext-libev": "*"
+        "ext-pcntl": "For signal handling support when using the StreamSelectLoop"
     },
     "autoload": {
         "psr-4": {
-            "React\\EventLoop\\": "src"
+            "React\\EventLoop\\": "src/"
+        }
+    },
+    "autoload-dev": {
+        "psr-4": {
+            "React\\Tests\\EventLoop\\": "tests/"
         }
     }
 }
diff --git a/examples/01-timers.php b/examples/01-timers.php
new file mode 100644
index 00000000..5f263b3e
--- /dev/null
+++ b/examples/01-timers.php
@@ -0,0 +1,13 @@
+<?php
+
+use React\EventLoop\Loop;
+
+require __DIR__ . '/../vendor/autoload.php';
+
+Loop::addTimer(0.8, function () {
+    echo 'world!' . PHP_EOL;
+});
+
+Loop::addTimer(0.3, function () {
+    echo 'hello ';
+});
diff --git a/examples/02-periodic.php b/examples/02-periodic.php
new file mode 100644
index 00000000..68533bd3
--- /dev/null
+++ b/examples/02-periodic.php
@@ -0,0 +1,14 @@
+<?php
+
+use React\EventLoop\Loop;
+
+require __DIR__ . '/../vendor/autoload.php';
+
+$timer = Loop::addPeriodicTimer(0.1, function () {
+    echo 'Tick' . PHP_EOL;
+});
+
+Loop::addTimer(1.0, function () use ($timer) {
+    Loop::cancelTimer($timer);
+    echo 'Done' . PHP_EOL;
+});
diff --git a/examples/03-ticks.php b/examples/03-ticks.php
new file mode 100644
index 00000000..e32e67af
--- /dev/null
+++ b/examples/03-ticks.php
@@ -0,0 +1,13 @@
+<?php
+
+use React\EventLoop\Loop;
+
+require __DIR__ . '/../vendor/autoload.php';
+
+Loop::futureTick(function () {
+    echo 'b';
+});
+Loop::futureTick(function () {
+    echo 'c';
+});
+echo 'a';
diff --git a/examples/04-signals.php b/examples/04-signals.php
new file mode 100644
index 00000000..e841311b
--- /dev/null
+++ b/examples/04-signals.php
@@ -0,0 +1,17 @@
+<?php
+
+use React\EventLoop\Loop;
+
+require __DIR__ . '/../vendor/autoload.php';
+
+if (!defined('SIGINT')) {
+    fwrite(STDERR, 'Not supported on your platform (ext-pcntl missing or Windows?)' . PHP_EOL);
+    exit(1);
+}
+
+Loop::addSignal(SIGINT, $func = function ($signal) use (&$func) {
+    echo 'Signal: ', (string)$signal, PHP_EOL;
+    Loop::removeSignal(SIGINT, $func);
+});
+
+echo 'Listening for SIGINT. Use "kill -SIGINT ' . getmypid() . '" or CTRL+C' . PHP_EOL;
diff --git a/examples/11-consume-stdin.php b/examples/11-consume-stdin.php
new file mode 100644
index 00000000..dfcb220d
--- /dev/null
+++ b/examples/11-consume-stdin.php
@@ -0,0 +1,26 @@
+<?php
+
+use React\EventLoop\Loop;
+
+require __DIR__ . '/../vendor/autoload.php';
+
+if (!defined('STDIN') || stream_set_blocking(STDIN, false) !== true) {
+    fwrite(STDERR, 'ERROR: Unable to set STDIN non-blocking (not CLI or Windows?)' . PHP_EOL);
+    exit(1);
+}
+
+// read everything from STDIN and report number of bytes
+// for illustration purposes only, should use react/stream instead
+Loop::addReadStream(STDIN, function ($stream) {
+    $chunk = fread($stream, 64 * 1024);
+
+    // reading nothing means we reached EOF
+    if ($chunk === '') {
+        Loop::removeReadStream($stream);
+        stream_set_blocking($stream, true);
+        fclose($stream);
+        return;
+    }
+
+    echo strlen($chunk) . ' bytes' . PHP_EOL;
+});
diff --git a/examples/12-generate-yes.php b/examples/12-generate-yes.php
new file mode 100644
index 00000000..91442016
--- /dev/null
+++ b/examples/12-generate-yes.php
@@ -0,0 +1,39 @@
+<?php
+
+use React\EventLoop\Loop;
+
+require __DIR__ . '/../vendor/autoload.php';
+
+// data can be given as first argument or defaults to "y"
+$data = ($argv[1] ?? 'y') . "\n";
+
+// repeat data X times in order to fill around 200 KB
+$data = str_repeat($data, round(200000 / strlen($data)));
+
+if (!defined('STDOUT') || stream_set_blocking(STDOUT, false) !== true) {
+    fwrite(STDERR, 'ERROR: Unable to set STDOUT non-blocking (not CLI or Windows?)' . PHP_EOL);
+    exit(1);
+}
+
+// write data to STDOUT whenever its write buffer accepts data
+// for illustrations purpose only, should use react/stream instead
+Loop::addWriteStream(STDOUT, function ($stdout) use (&$data) {
+    // try to write data
+    $r = fwrite($stdout, $data);
+
+    // nothing could be written despite being writable => closed
+    if ($r === 0) {
+        Loop::removeWriteStream($stdout);
+        fclose($stdout);
+        stream_set_blocking($stdout, true);
+        fwrite(STDERR, 'Stopped because STDOUT closed' . PHP_EOL);
+
+        return;
+    }
+
+    // implement a very simple ring buffer, unless everything has been written at once:
+    // everything written in this iteration will be appended for next iteration
+    if (isset($data[$r])) {
+        $data = substr($data, $r) . substr($data, 0, $r);
+    }
+});
diff --git a/examples/13-http-client-blocking.php b/examples/13-http-client-blocking.php
new file mode 100644
index 00000000..ae119b5a
--- /dev/null
+++ b/examples/13-http-client-blocking.php
@@ -0,0 +1,31 @@
+<?php
+
+use React\EventLoop\Loop;
+
+require __DIR__ . '/../vendor/autoload.php';
+
+// connect to example.com:80 (blocking call!)
+// for illustration purposes only, should use react/socket instead
+$stream = stream_socket_client('tcp://example.com:80');
+if (!$stream) {
+    exit(1);
+}
+stream_set_blocking($stream, false);
+
+// send HTTP request
+fwrite($stream, "GET / HTTP/1.1\r\nHost: example.com\r\nConnection: close\r\n\r\n");
+
+// wait for HTTP response
+Loop::addReadStream($stream, function ($stream) {
+    $chunk = fread($stream, 64 * 1024);
+
+    // reading nothing means we reached EOF
+    if ($chunk === '') {
+        echo '[END]' . PHP_EOL;
+        Loop::removeReadStream($stream);
+        fclose($stream);
+        return;
+    }
+
+    echo $chunk;
+});
diff --git a/examples/14-http-client-async.php b/examples/14-http-client-async.php
new file mode 100644
index 00000000..93419c02
--- /dev/null
+++ b/examples/14-http-client-async.php
@@ -0,0 +1,60 @@
+<?php
+
+use React\EventLoop\Factory;
+use React\EventLoop\Loop;
+
+require __DIR__ . '/../vendor/autoload.php';
+
+// resolve hostname before establishing TCP/IP connection (resolving DNS is still blocking here)
+// for illustration purposes only, should use react/socket or react/dns instead!
+$ip = gethostbyname('example.com');
+if (ip2long($ip) === false) {
+    echo 'Unable to resolve hostname' . PHP_EOL;
+    exit(1);
+}
+
+// establish TCP/IP connection (non-blocking)
+// for illustraction purposes only, should use react/socket instead!
+$stream = stream_socket_client('tcp://' . $ip . ':80', $errno, $errstr, null, STREAM_CLIENT_CONNECT | STREAM_CLIENT_ASYNC_CONNECT);
+if (!$stream) {
+    exit(1);
+}
+stream_set_blocking($stream, false);
+
+// print progress every 10ms
+echo 'Connecting';
+$timer = Loop::addPeriodicTimer(0.01, function () {
+    echo '.';
+});
+
+// wait for connection success/error
+Loop::addWriteStream($stream, function ($stream) use ($timer) {
+    Loop::removeWriteStream($stream);
+    Loop::cancelTimer($timer);
+
+    // check for socket error (connection rejected)
+    if (stream_socket_get_name($stream, true) === false) {
+        echo '[unable to connect]' . PHP_EOL;
+        exit(1);
+    } else {
+        echo '[connected]' . PHP_EOL;
+    }
+
+    // send HTTP request
+    fwrite($stream, "GET / HTTP/1.1\r\nHost: example.com\r\nConnection: close\r\n\r\n");
+
+    // wait for HTTP response
+    Loop::addReadStream($stream, function ($stream) {
+        $chunk = fread($stream, 64 * 1024);
+
+        // reading nothing means we reached EOF
+        if ($chunk === '') {
+            echo '[END]' . PHP_EOL;
+            Loop::removeReadStream($stream);
+            fclose($stream);
+            return;
+        }
+
+        echo $chunk;
+    });
+});
diff --git a/examples/21-http-server.php b/examples/21-http-server.php
new file mode 100644
index 00000000..61529240
--- /dev/null
+++ b/examples/21-http-server.php
@@ -0,0 +1,34 @@
+<?php
+
+use React\EventLoop\Loop;
+
+require __DIR__ . '/../vendor/autoload.php';
+
+// start TCP/IP server on localhost:8080
+// for illustration purposes only, should use react/socket instead
+$server = stream_socket_server('tcp://127.0.0.1:8080');
+if (!$server) {
+    exit(1);
+}
+stream_set_blocking($server, false);
+
+// wait for incoming connections on server socket
+Loop::addReadStream($server, function ($server) {
+    $conn = stream_socket_accept($server);
+    $data = "HTTP/1.1 200 OK\r\nContent-Length: 3\r\n\r\nHi\n";
+    Loop::addWriteStream($conn, function ($conn) use (&$data) {
+        $written = fwrite($conn, $data);
+        if ($written === strlen($data)) {
+            fclose($conn);
+            Loop::removeWriteStream($conn);
+        } else {
+            $data = substr($data, $written);
+        }
+    });
+});
+
+Loop::addPeriodicTimer(5, function () {
+    $memory = memory_get_usage() / 1024;
+    $formatted = number_format($memory, 3).'K';
+    echo "Current memory usage: {$formatted}\n";
+});
diff --git a/examples/91-benchmark-ticks.php b/examples/91-benchmark-ticks.php
new file mode 100644
index 00000000..7a38f424
--- /dev/null
+++ b/examples/91-benchmark-ticks.php
@@ -0,0 +1,11 @@
+<?php
+
+use React\EventLoop\Loop;
+
+require __DIR__ . '/../vendor/autoload.php';
+
+$n = (int) ($argv[1] ?? 1000 * 100);
+
+for ($i = 0; $i < $n; ++$i) {
+    Loop::futureTick(function () { });
+}
diff --git a/examples/92-benchmark-timers.php b/examples/92-benchmark-timers.php
new file mode 100644
index 00000000..ef838e60
--- /dev/null
+++ b/examples/92-benchmark-timers.php
@@ -0,0 +1,11 @@
+<?php
+
+use React\EventLoop\Loop;
+
+require __DIR__ . '/../vendor/autoload.php';
+
+$n = (int) ($argv[1] ?? 1000 * 100);
+
+for ($i = 0; $i < $n; ++$i) {
+    Loop::addTimer(0, function () { });
+}
diff --git a/examples/93-benchmark-ticks-delay.php b/examples/93-benchmark-ticks-delay.php
new file mode 100644
index 00000000..28a99070
--- /dev/null
+++ b/examples/93-benchmark-ticks-delay.php
@@ -0,0 +1,18 @@
+<?php
+
+use React\EventLoop\Loop;
+
+require __DIR__ . '/../vendor/autoload.php';
+
+$ticks = (int) ($argv[1] ?? 1000 * 100);
+$tick = function () use (&$tick, &$ticks) {
+    if ($ticks > 0) {
+        --$ticks;
+        //$loop->addTimer(0, $tick);
+        Loop::futureTick($tick);
+    } else {
+        echo 'done';
+    }
+};
+
+$tick();
diff --git a/examples/94-benchmark-timers-delay.php b/examples/94-benchmark-timers-delay.php
new file mode 100644
index 00000000..df237264
--- /dev/null
+++ b/examples/94-benchmark-timers-delay.php
@@ -0,0 +1,18 @@
+<?php
+
+use React\EventLoop\Loop;
+
+require __DIR__ . '/../vendor/autoload.php';
+
+$ticks = (int) ($argv[1] ?? 1000 * 100);
+$tick = function () use (&$tick, &$ticks) {
+    if ($ticks > 0) {
+        --$ticks;
+        //$loop->futureTick($tick);
+        Loop::addTimer(0, $tick);
+    } else {
+        echo 'done';
+    }
+};
+
+$tick();
diff --git a/examples/95-benchmark-memory.php b/examples/95-benchmark-memory.php
new file mode 100644
index 00000000..efd8c82d
--- /dev/null
+++ b/examples/95-benchmark-memory.php
@@ -0,0 +1,67 @@
+<?php
+
+/**
+ * Run the script indefinitely seconds with the loop from the factory and report every 2 seconds:
+ * php 95-benchmark-memory.php
+ * Run the script for 30 seconds with the stream_select loop and report every 10 seconds:
+ * php 95-benchmark-memory.php -t 30 -l StreamSelect -r 10
+ */
+
+use React\EventLoop\Loop;
+use React\EventLoop\LoopInterface;
+use React\EventLoop\TimerInterface;
+
+require __DIR__ . '/../vendor/autoload.php';
+
+$args = getopt('t:l:r:');
+$t  = (int) ($args['t'] ?? 0);
+$loop = isset($args['l']) && class_exists('React\EventLoop\\' . $args['l'] . 'Loop') ? 'React\EventLoop\\' . $args['l'] . 'Loop' : Loop::get();
+
+if (!($loop instanceof LoopInterface)) {
+    Loop::set(new $loop());
+}
+
+$r = (int) ($args['r'] ?? 2);
+
+$runs = 0;
+
+if (5 < $t) {
+    Loop::addTimer($t, function () {
+        Loop::stop();
+    });
+
+}
+
+Loop::addPeriodicTimer(0.001, function () use (&$runs) {
+    $runs++;
+
+    Loop::addPeriodicTimer(1, function (TimerInterface $timer) {
+        Loop::cancelTimer($timer);
+    });
+});
+
+Loop::addPeriodicTimer($r, function () use (&$runs) {
+    $kmem = round(memory_get_usage() / 1024);
+    $kmemReal = round(memory_get_usage(true) / 1024);
+    echo "Runs:\t\t\t$runs\n";
+    echo "Memory (internal):\t$kmem KiB\n";
+    echo "Memory (real):\t\t$kmemReal KiB\n";
+    echo str_repeat('-', 50), "\n";
+});
+
+echo "PHP Version:\t\t", phpversion(), "\n";
+echo "Loop\t\t\t", get_class(Loop::get()), "\n";
+echo "Time\t\t\t", date('r'), "\n";
+
+echo str_repeat('-', 50), "\n";
+
+$beginTime = time();
+Loop::run();
+$endTime = time();
+$timeTaken = $endTime - $beginTime;
+
+echo "PHP Version:\t\t", phpversion(), "\n";
+echo "Loop\t\t\t", get_class(Loop::get()), "\n";
+echo "Time\t\t\t", date('r'), "\n";
+echo "Time taken\t\t", $timeTaken, " seconds\n";
+echo "Runs per second\t\t", round($runs / $timeTaken), "\n";
diff --git a/phpunit.xml.dist b/phpunit.xml.dist
index cba6d4dd..ffc13cd3 100644
--- a/phpunit.xml.dist
+++ b/phpunit.xml.dist
@@ -1,25 +1,28 @@
 <?xml version="1.0" encoding="UTF-8"?>
 
-<phpunit backupGlobals="false"
-         backupStaticAttributes="false"
+<!-- PHPUnit configuration file with new format for PHPUnit 9.6+ -->
+<phpunit xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+         xsi:noNamespaceSchemaLocation="https://schema.phpunit.de/9.6/phpunit.xsd"
+         bootstrap="vendor/autoload.php"
+         cacheResult="false"
          colors="true"
-         convertErrorsToExceptions="true"
-         convertNoticesToExceptions="true"
-         convertWarningsToExceptions="true"
-         processIsolation="false"
-         stopOnFailure="false"
-         syntaxCheck="false"
-         bootstrap="tests/bootstrap.php"
->
+         convertDeprecationsToExceptions="true">
     <testsuites>
-        <testsuite name="React Test Suite">
+        <testsuite name="EventLoop Test Suite">
             <directory>./tests/</directory>
         </testsuite>
     </testsuites>
-
-    <filter>
-        <whitelist>
+    <coverage>
+        <include>
             <directory>./src/</directory>
-        </whitelist>
-    </filter>
+        </include>
+    </coverage>
+    <php>
+        <ini name="error_reporting" value="-1" />
+        <!-- Evaluate assertions, requires running with "php -d zend.assertions=1 vendor/bin/phpunit" -->
+        <!-- <ini name="zend.assertions" value="1" /> -->
+        <ini name="assert.active" value="1" />
+        <ini name="assert.exception" value="1" />
+        <ini name="assert.bail" value="0" />
+    </php>
 </phpunit>
diff --git a/phpunit.xml.legacy b/phpunit.xml.legacy
new file mode 100644
index 00000000..7c148001
--- /dev/null
+++ b/phpunit.xml.legacy
@@ -0,0 +1,26 @@
+<?xml version="1.0" encoding="UTF-8"?>
+
+<!-- PHPUnit configuration file with old format for legacy PHPUnit -->
+<phpunit xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+         xsi:noNamespaceSchemaLocation="https://schema.phpunit.de/7.5/phpunit.xsd"
+         bootstrap="vendor/autoload.php"
+         colors="true">
+    <testsuites>
+        <testsuite name="EventLoop Test Suite">
+            <directory>./tests/</directory>
+        </testsuite>
+    </testsuites>
+    <filter>
+        <whitelist>
+            <directory>./src/</directory>
+        </whitelist>
+    </filter>
+    <php>
+        <ini name="error_reporting" value="-1" />
+        <!-- Evaluate assertions, requires running with "php -d zend.assertions=1 vendor/bin/phpunit" -->
+        <!-- <ini name="zend.assertions" value="1" /> -->
+        <ini name="assert.active" value="1" />
+        <ini name="assert.exception" value="1" />
+        <ini name="assert.bail" value="0" />
+    </php>
+</phpunit>
diff --git a/src/ExtEvLoop.php b/src/ExtEvLoop.php
new file mode 100644
index 00000000..363ad0c4
--- /dev/null
+++ b/src/ExtEvLoop.php
@@ -0,0 +1,251 @@
+<?php
+
+namespace React\EventLoop;
+
+use Ev;
+use EvIo;
+use EvLoop;
+use React\EventLoop\Tick\FutureTickQueue;
+use React\EventLoop\Timer\Timer;
+use SplObjectStorage;
+
+/**
+ * An `ext-ev` based event loop.
+ *
+ * This loop uses the [`ev` PECL extension](https://pecl.php.net/package/ev),
+ * that provides an interface to `libev` library.
+ * `libev` itself supports a number of system-specific backends (epoll, kqueue).
+ *
+ * This loop is known to work with PHP 7.1 through PHP 8+.
+ *
+ * @see http://php.net/manual/en/book.ev.php
+ * @see https://bitbucket.org/osmanov/pecl-ev/overview
+ */
+class ExtEvLoop implements LoopInterface
+{
+    /**
+     * @var EvLoop
+     */
+    private $loop;
+
+    /**
+     * @var FutureTickQueue
+     */
+    private $futureTickQueue;
+
+    /**
+     * @var SplObjectStorage
+     */
+    private $timers;
+
+    /**
+     * @var EvIo[]
+     */
+    private $readStreams = [];
+
+    /**
+     * @var EvIo[]
+     */
+    private $writeStreams = [];
+
+    /**
+     * @var bool
+     */
+    private $running;
+
+    /**
+     * @var SignalsHandler
+     */
+    private $signals;
+
+    /**
+     * @var \EvSignal[]
+     */
+    private $signalEvents = [];
+
+    public function __construct()
+    {
+        $this->loop = new EvLoop();
+        $this->futureTickQueue = new FutureTickQueue();
+        $this->timers = new SplObjectStorage();
+        $this->signals = new SignalsHandler();
+    }
+
+    public function addReadStream($stream, $listener)
+    {
+        $key = (int)$stream;
+
+        if (isset($this->readStreams[$key])) {
+            return;
+        }
+
+        $callback = $this->getStreamListenerClosure($stream, $listener);
+        $event = $this->loop->io($stream, Ev::READ, $callback);
+        $this->readStreams[$key] = $event;
+    }
+
+    /**
+     * @param resource $stream
+     * @param callable $listener
+     *
+     * @return \Closure
+     */
+    private function getStreamListenerClosure($stream, $listener)
+    {
+        return function () use ($stream, $listener) {
+            \call_user_func($listener, $stream);
+        };
+    }
+
+    public function addWriteStream($stream, $listener)
+    {
+        $key = (int)$stream;
+
+        if (isset($this->writeStreams[$key])) {
+            return;
+        }
+
+        $callback = $this->getStreamListenerClosure($stream, $listener);
+        $event = $this->loop->io($stream, Ev::WRITE, $callback);
+        $this->writeStreams[$key] = $event;
+    }
+
+    public function removeReadStream($stream)
+    {
+        $key = (int)$stream;
+
+        if (!isset($this->readStreams[$key])) {
+            return;
+        }
+
+        $this->readStreams[$key]->stop();
+        unset($this->readStreams[$key]);
+    }
+
+    public function removeWriteStream($stream)
+    {
+        $key = (int)$stream;
+
+        if (!isset($this->writeStreams[$key])) {
+            return;
+        }
+
+        $this->writeStreams[$key]->stop();
+        unset($this->writeStreams[$key]);
+    }
+
+    public function addTimer($interval, $callback)
+    {
+        $timer = new Timer($interval, $callback, false);
+
+        $callback = function () use ($timer) {
+            \call_user_func($timer->getCallback(), $timer);
+
+            if ($this->timers->contains($timer)) {
+                $this->cancelTimer($timer);
+            }
+        };
+
+        $event = $this->loop->timer($timer->getInterval(), 0.0, $callback);
+        $this->timers->attach($timer, $event);
+
+        return $timer;
+    }
+
+    public function addPeriodicTimer($interval, $callback)
+    {
+        $timer = new Timer($interval, $callback, true);
+
+        $callback = function () use ($timer) {
+            \call_user_func($timer->getCallback(), $timer);
+        };
+
+        $event = $this->loop->timer($timer->getInterval(), $timer->getInterval(), $callback);
+        $this->timers->attach($timer, $event);
+
+        return $timer;
+    }
+
+    public function cancelTimer(TimerInterface $timer)
+    {
+        if (!isset($this->timers[$timer])) {
+            return;
+        }
+
+        $event = $this->timers[$timer];
+        $event->stop();
+        $this->timers->detach($timer);
+    }
+
+    public function futureTick($listener)
+    {
+        $this->futureTickQueue->add($listener);
+    }
+
+    public function run()
+    {
+        $this->running = true;
+
+        while ($this->running) {
+            $this->futureTickQueue->tick();
+
+            $hasPendingCallbacks = !$this->futureTickQueue->isEmpty();
+            $wasJustStopped = !$this->running;
+            $nothingLeftToDo = !$this->readStreams
+                && !$this->writeStreams
+                && !$this->timers->count()
+                && $this->signals->isEmpty();
+
+            $flags = Ev::RUN_ONCE;
+            if ($wasJustStopped || $hasPendingCallbacks) {
+                $flags |= Ev::RUN_NOWAIT;
+            } elseif ($nothingLeftToDo) {
+                break;
+            }
+
+            $this->loop->run($flags);
+        }
+    }
+
+    public function stop()
+    {
+        $this->running = false;
+    }
+
+    public function __destruct()
+    {
+        /** @var TimerInterface $timer */
+        foreach ($this->timers as $timer) {
+            $this->cancelTimer($timer);
+        }
+
+        foreach ($this->readStreams as $key => $stream) {
+            $this->removeReadStream($key);
+        }
+
+        foreach ($this->writeStreams as $key => $stream) {
+            $this->removeWriteStream($key);
+        }
+    }
+
+    public function addSignal($signal, $listener)
+    {
+        $this->signals->add($signal, $listener);
+
+        if (!isset($this->signalEvents[$signal])) {
+            $this->signalEvents[$signal] = $this->loop->signal($signal, function() use ($signal) {
+                $this->signals->call($signal);
+            });
+        }
+    }
+
+    public function removeSignal($signal, $listener)
+    {
+        $this->signals->remove($signal, $listener);
+
+        if (isset($this->signalEvents[$signal])) {
+            $this->signalEvents[$signal]->stop();
+            unset($this->signalEvents[$signal]);
+        }
+    }
+}
diff --git a/src/ExtEventLoop.php b/src/ExtEventLoop.php
index 7160c908..d6f24b2a 100644
--- a/src/ExtEventLoop.php
+++ b/src/ExtEventLoop.php
@@ -2,213 +2,206 @@
 
 namespace React\EventLoop;
 
+use BadMethodCallException;
 use Event;
 use EventBase;
-use EventConfig as EventBaseConfig;
 use React\EventLoop\Tick\FutureTickQueue;
-use React\EventLoop\Tick\NextTickQueue;
 use React\EventLoop\Timer\Timer;
-use React\EventLoop\Timer\TimerInterface;
 use SplObjectStorage;
 
 /**
- * An ext-event based event-loop.
+ * An `ext-event` based event loop.
+ *
+ * This uses the [`event` PECL extension](https://pecl.php.net/package/event),
+ * that provides an interface to `libevent` library.
+ * `libevent` itself supports a number of system-specific backends (epoll, kqueue).
+ *
+ * This loop is known to work with PHP 7.1 through PHP 8+.
+ *
+ * @link https://pecl.php.net/package/event
  */
-class ExtEventLoop implements LoopInterface
+final class ExtEventLoop implements LoopInterface
 {
     private $eventBase;
-    private $nextTickQueue;
     private $futureTickQueue;
     private $timerCallback;
     private $timerEvents;
     private $streamCallback;
-    private $streamEvents = [];
-    private $streamFlags = [];
+    private $readEvents = [];
+    private $writeEvents = [];
     private $readListeners = [];
     private $writeListeners = [];
+    private $readRefs = [];
+    private $writeRefs = [];
     private $running;
+    private $signals;
+    private $signalEvents = [];
 
-    public function __construct(EventBaseConfig $config = null)
+    public function __construct()
     {
+        if (!\class_exists('EventBase', false)) {
+            throw new BadMethodCallException('Cannot create ExtEventLoop, ext-event extension missing');
+        }
+
+        // support arbitrary file descriptors and not just sockets
+        // Windows only has limited file descriptor support, so do not require this (will fail otherwise)
+        // @link http://www.wangafu.net/~nickm/libevent-book/Ref2_eventbase.html#_setting_up_a_complicated_event_base
+        $config = new \EventConfig();
+        if (\DIRECTORY_SEPARATOR !== '\\') {
+            $config->requireFeatures(\EventConfig::FEATURE_FDS);
+        }
+
         $this->eventBase = new EventBase($config);
-        $this->nextTickQueue = new NextTickQueue($this);
-        $this->futureTickQueue = new FutureTickQueue($this);
+        $this->futureTickQueue = new FutureTickQueue();
         $this->timerEvents = new SplObjectStorage();
+        $this->signals = new SignalsHandler();
 
         $this->createTimerCallback();
         $this->createStreamCallback();
     }
 
-    /**
-     * {@inheritdoc}
-     */
-    public function addReadStream($stream, callable $listener)
+    public function __destruct()
     {
-        $key = (int) $stream;
-
-        if (!isset($this->readListeners[$key])) {
-            $this->readListeners[$key] = $listener;
-            $this->subscribeStreamEvent($stream, Event::READ);
+        // explicitly clear all references to Event objects to prevent SEGFAULTs on Windows
+        foreach ($this->timerEvents as $timer) {
+            $this->timerEvents->detach($timer);
         }
+
+        $this->readEvents = [];
+        $this->writeEvents = [];
     }
 
-    /**
-     * {@inheritdoc}
-     */
-    public function addWriteStream($stream, callable $listener)
+    public function addReadStream($stream, $listener)
     {
         $key = (int) $stream;
-
-        if (!isset($this->writeListeners[$key])) {
-            $this->writeListeners[$key] = $listener;
-            $this->subscribeStreamEvent($stream, Event::WRITE);
+        if (isset($this->readListeners[$key])) {
+            return;
         }
+
+        $event = new Event($this->eventBase, $stream, Event::PERSIST | Event::READ, $this->streamCallback);
+        $event->add();
+        $this->readEvents[$key] = $event;
+        $this->readListeners[$key] = $listener;
+
+        // ext-event does not increase refcount on stream resources for PHP 7+
+        // manually keep track of stream resource to prevent premature garbage collection
+        $this->readRefs[$key] = $stream;
     }
 
-    /**
-     * {@inheritdoc}
-     */
-    public function removeReadStream($stream)
+    public function addWriteStream($stream, $listener)
     {
         $key = (int) $stream;
-
-        if (isset($this->readListeners[$key])) {
-            unset($this->readListeners[$key]);
-            $this->unsubscribeStreamEvent($stream, Event::READ);
+        if (isset($this->writeListeners[$key])) {
+            return;
         }
+
+        $event = new Event($this->eventBase, $stream, Event::PERSIST | Event::WRITE, $this->streamCallback);
+        $event->add();
+        $this->writeEvents[$key] = $event;
+        $this->writeListeners[$key] = $listener;
+
+        // ext-event does not increase refcount on stream resources for PHP 7+
+        // manually keep track of stream resource to prevent premature garbage collection
+        $this->writeRefs[$key] = $stream;
     }
 
-    /**
-     * {@inheritdoc}
-     */
-    public function removeWriteStream($stream)
+    public function removeReadStream($stream)
     {
         $key = (int) $stream;
 
-        if (isset($this->writeListeners[$key])) {
-            unset($this->writeListeners[$key]);
-            $this->unsubscribeStreamEvent($stream, Event::WRITE);
+        if (isset($this->readEvents[$key])) {
+            $this->readEvents[$key]->free();
+            unset(
+                $this->readEvents[$key],
+                $this->readListeners[$key],
+                $this->readRefs[$key]
+            );
         }
     }
 
-    /**
-     * {@inheritdoc}
-     */
-    public function removeStream($stream)
+    public function removeWriteStream($stream)
     {
         $key = (int) $stream;
 
-        if (isset($this->streamEvents[$key])) {
-            $this->streamEvents[$key]->free();
-
+        if (isset($this->writeEvents[$key])) {
+            $this->writeEvents[$key]->free();
             unset(
-                $this->streamFlags[$key],
-                $this->streamEvents[$key],
-                $this->readListeners[$key],
-                $this->writeListeners[$key]
+                $this->writeEvents[$key],
+                $this->writeListeners[$key],
+                $this->writeRefs[$key]
             );
         }
     }
 
-    /**
-     * {@inheritdoc}
-     */
-    public function addTimer($interval, callable $callback)
+    public function addTimer($interval, $callback)
     {
-        $timer = new Timer($this, $interval, $callback, false);
+        $timer = new Timer($interval, $callback, false);
 
         $this->scheduleTimer($timer);
 
         return $timer;
     }
 
-    /**
-     * {@inheritdoc}
-     */
-    public function addPeriodicTimer($interval, callable $callback)
+    public function addPeriodicTimer($interval, $callback)
     {
-        $timer = new Timer($this, $interval, $callback, true);
+        $timer = new Timer($interval, $callback, true);
 
         $this->scheduleTimer($timer);
 
         return $timer;
     }
 
-    /**
-     * {@inheritdoc}
-     */
     public function cancelTimer(TimerInterface $timer)
     {
-        if ($this->isTimerActive($timer)) {
+        if ($this->timerEvents->contains($timer)) {
             $this->timerEvents[$timer]->free();
             $this->timerEvents->detach($timer);
         }
     }
 
-    /**
-     * {@inheritdoc}
-     */
-    public function isTimerActive(TimerInterface $timer)
+    public function futureTick($listener)
     {
-        return $this->timerEvents->contains($timer);
+        $this->futureTickQueue->add($listener);
     }
 
-    /**
-     * {@inheritdoc}
-     */
-    public function nextTick(callable $listener)
+    public function addSignal($signal, $listener)
     {
-        $this->nextTickQueue->add($listener);
-    }
+        $this->signals->add($signal, $listener);
 
-    /**
-     * {@inheritdoc}
-     */
-    public function futureTick(callable $listener)
-    {
-        $this->futureTickQueue->add($listener);
+        if (!isset($this->signalEvents[$signal])) {
+            $this->signalEvents[$signal] = Event::signal($this->eventBase, $signal, [$this->signals, 'call']);
+            $this->signalEvents[$signal]->add();
+        }
     }
 
-    /**
-     * {@inheritdoc}
-     */
-    public function tick()
+    public function removeSignal($signal, $listener)
     {
-        $this->nextTickQueue->tick();
+        $this->signals->remove($signal, $listener);
 
-        $this->futureTickQueue->tick();
-
-        // @-suppression: https://github.com/reactphp/react/pull/234#discussion-diff-7759616R226
-        @$this->eventBase->loop(EventBase::LOOP_ONCE | EventBase::LOOP_NONBLOCK);
+        if (isset($this->signalEvents[$signal]) && $this->signals->count($signal) === 0) {
+            $this->signalEvents[$signal]->free();
+            unset($this->signalEvents[$signal]);
+        }
     }
 
-    /**
-     * {@inheritdoc}
-     */
     public function run()
     {
         $this->running = true;
 
         while ($this->running) {
-            $this->nextTickQueue->tick();
-
             $this->futureTickQueue->tick();
 
             $flags = EventBase::LOOP_ONCE;
-            if (!$this->running || !$this->nextTickQueue->isEmpty() || !$this->futureTickQueue->isEmpty()) {
+            if (!$this->running || !$this->futureTickQueue->isEmpty()) {
                 $flags |= EventBase::LOOP_NONBLOCK;
-            } elseif (!$this->streamEvents && !$this->timerEvents->count()) {
+            } elseif (!$this->readEvents && !$this->writeEvents && !$this->timerEvents->count() && $this->signals->isEmpty()) {
                 break;
             }
 
-            // @-suppression: https://github.com/reactphp/react/pull/234#discussion-diff-7759616R226
-            @$this->eventBase->loop($flags);
+            $this->eventBase->loop($flags);
         }
     }
 
-    /**
-     * {@inheritdoc}
-     */
     public function stop()
     {
         $this->running = false;
@@ -233,58 +226,6 @@ private function scheduleTimer(TimerInterface $timer)
         $event->add($timer->getInterval());
     }
 
-    /**
-     * Create a new ext-event Event object, or update the existing one.
-     *
-     * @param resource $stream
-     * @param integer  $flag   Event::READ or Event::WRITE
-     */
-    private function subscribeStreamEvent($stream, $flag)
-    {
-        $key = (int) $stream;
-
-        if (isset($this->streamEvents[$key])) {
-            $event = $this->streamEvents[$key];
-            $flags = ($this->streamFlags[$key] |= $flag);
-
-            $event->del();
-            $event->set($this->eventBase, $stream, Event::PERSIST | $flags, $this->streamCallback);
-        } else {
-            $event = new Event($this->eventBase, $stream, Event::PERSIST | $flag, $this->streamCallback);
-
-            $this->streamEvents[$key] = $event;
-            $this->streamFlags[$key] = $flag;
-        }
-
-        $event->add();
-    }
-
-    /**
-     * Update the ext-event Event object for this stream to stop listening to
-     * the given event type, or remove it entirely if it's no longer needed.
-     *
-     * @param resource $stream
-     * @param integer  $flag   Event::READ or Event::WRITE
-     */
-    private function unsubscribeStreamEvent($stream, $flag)
-    {
-        $key = (int) $stream;
-
-        $flags = $this->streamFlags[$key] &= ~$flag;
-
-        if (0 === $flags) {
-            $this->removeStream($stream);
-
-            return;
-        }
-
-        $event = $this->streamEvents[$key];
-
-        $event->del();
-        $event->set($this->eventBase, $stream, Event::PERSIST | $flags, $this->streamCallback);
-        $event->add();
-    }
-
     /**
      * Create a callback used as the target of timer events.
      *
@@ -295,9 +236,9 @@ private function unsubscribeStreamEvent($stream, $flag)
     private function createTimerCallback()
     {
         $this->timerCallback = function ($_, $__, $timer) {
-            call_user_func($timer->getCallback(), $timer);
+            \call_user_func($timer->getCallback(), $timer);
 
-            if (!$timer->isPeriodic() && $this->isTimerActive($timer)) {
+            if (!$timer->isPeriodic() && $this->timerEvents->contains($timer)) {
                 $this->cancelTimer($timer);
             }
         };
@@ -316,11 +257,11 @@ private function createStreamCallback()
             $key = (int) $stream;
 
             if (Event::READ === (Event::READ & $flags) && isset($this->readListeners[$key])) {
-                call_user_func($this->readListeners[$key], $stream, $this);
+                \call_user_func($this->readListeners[$key], $stream);
             }
 
             if (Event::WRITE === (Event::WRITE & $flags) && isset($this->writeListeners[$key])) {
-                call_user_func($this->writeListeners[$key], $stream, $this);
+                \call_user_func($this->writeListeners[$key], $stream);
             }
         };
     }
diff --git a/src/ExtUvLoop.php b/src/ExtUvLoop.php
new file mode 100644
index 00000000..e9e79524
--- /dev/null
+++ b/src/ExtUvLoop.php
@@ -0,0 +1,339 @@
+<?php
+
+namespace React\EventLoop;
+
+use React\EventLoop\Tick\FutureTickQueue;
+use React\EventLoop\Timer\Timer;
+use SplObjectStorage;
+
+/**
+ * An `ext-uv` based event loop.
+ *
+ * This loop uses the [`uv` PECL extension](https://pecl.php.net/package/uv),
+ * that provides an interface to `libuv` library.
+ * `libuv` itself supports a number of system-specific backends (epoll, kqueue).
+ *
+ * This loop is known to work with PHP 7.1 through PHP 8+.
+ *
+ * @see https://github.com/bwoebi/php-uv
+ */
+final class ExtUvLoop implements LoopInterface
+{
+    private $uv;
+    private $futureTickQueue;
+    private $timers;
+    private $streamEvents = [];
+    private $readStreams = [];
+    private $writeStreams = [];
+    private $running;
+    private $signals;
+    private $signalEvents = [];
+    private $streamListener;
+
+    public function __construct()
+    {
+        if (!\function_exists('uv_loop_new')) {
+            throw new \BadMethodCallException('Cannot create LibUvLoop, ext-uv extension missing');
+        }
+
+        $this->uv = \uv_loop_new();
+        $this->futureTickQueue = new FutureTickQueue();
+        $this->timers = new SplObjectStorage();
+        $this->streamListener = $this->createStreamListener();
+        $this->signals = new SignalsHandler();
+    }
+
+    /**
+     * Returns the underlying ext-uv event loop. (Internal ReactPHP use only.)
+     *
+     * @internal
+     *
+     * @return resource
+     */
+    public function getUvLoop()
+    {
+        return $this->uv;
+    }
+
+    /**
+     * {@inheritdoc}
+     */
+    public function addReadStream($stream, $listener)
+    {
+        if (isset($this->readStreams[(int) $stream])) {
+            return;
+        }
+
+        $this->readStreams[(int) $stream] = $listener;
+        $this->addStream($stream);
+    }
+
+    /**
+     * {@inheritdoc}
+     */
+    public function addWriteStream($stream, $listener)
+    {
+        if (isset($this->writeStreams[(int) $stream])) {
+            return;
+        }
+
+        $this->writeStreams[(int) $stream] = $listener;
+        $this->addStream($stream);
+    }
+
+    /**
+     * {@inheritdoc}
+     */
+    public function removeReadStream($stream)
+    {
+        if (!isset($this->streamEvents[(int) $stream])) {
+            return;
+        }
+
+        unset($this->readStreams[(int) $stream]);
+        $this->removeStream($stream);
+    }
+
+    /**
+     * {@inheritdoc}
+     */
+    public function removeWriteStream($stream)
+    {
+        if (!isset($this->streamEvents[(int) $stream])) {
+            return;
+        }
+
+        unset($this->writeStreams[(int) $stream]);
+        $this->removeStream($stream);
+    }
+
+    /**
+     * {@inheritdoc}
+     */
+    public function addTimer($interval, $callback)
+    {
+        $timer = new Timer($interval, $callback, false);
+
+        $callback = function () use ($timer) {
+            \call_user_func($timer->getCallback(), $timer);
+
+            if ($this->timers->contains($timer)) {
+                $this->cancelTimer($timer);
+            }
+        };
+
+        $event = \uv_timer_init($this->uv);
+        $this->timers->attach($timer, $event);
+        \uv_timer_start(
+            $event,
+            $this->convertFloatSecondsToMilliseconds($interval),
+            0,
+            $callback
+        );
+
+        return $timer;
+    }
+
+    /**
+     * {@inheritdoc}
+     */
+    public function addPeriodicTimer($interval, $callback)
+    {
+        $timer = new Timer($interval, $callback, true);
+
+        $callback = function () use ($timer) {
+            \call_user_func($timer->getCallback(), $timer);
+        };
+
+        $interval = $this->convertFloatSecondsToMilliseconds($interval);
+        $event = \uv_timer_init($this->uv);
+        $this->timers->attach($timer, $event);
+        \uv_timer_start(
+            $event,
+            $interval,
+            (int) $interval === 0 ? 1 : $interval,
+            $callback
+        );
+
+        return $timer;
+    }
+
+    /**
+     * {@inheritdoc}
+     */
+    public function cancelTimer(TimerInterface $timer)
+    {
+        if (isset($this->timers[$timer])) {
+            @\uv_timer_stop($this->timers[$timer]);
+            $this->timers->detach($timer);
+        }
+    }
+
+    /**
+     * {@inheritdoc}
+     */
+    public function futureTick($listener)
+    {
+        $this->futureTickQueue->add($listener);
+    }
+
+    public function addSignal($signal, $listener)
+    {
+        $this->signals->add($signal, $listener);
+
+        if (!isset($this->signalEvents[$signal])) {
+            $this->signalEvents[$signal] = \uv_signal_init($this->uv);
+            \uv_signal_start($this->signalEvents[$signal], function () use ($signal) {
+                $this->signals->call($signal);
+            }, $signal);
+        }
+    }
+
+    public function removeSignal($signal, $listener)
+    {
+        $this->signals->remove($signal, $listener);
+
+        if (isset($this->signalEvents[$signal]) && $this->signals->count($signal) === 0) {
+            \uv_signal_stop($this->signalEvents[$signal]);
+            unset($this->signalEvents[$signal]);
+        }
+    }
+
+    /**
+     * {@inheritdoc}
+     */
+    public function run()
+    {
+        $this->running = true;
+
+        while ($this->running) {
+            $this->futureTickQueue->tick();
+
+            $hasPendingCallbacks = !$this->futureTickQueue->isEmpty();
+            $wasJustStopped = !$this->running;
+            $nothingLeftToDo = !$this->readStreams
+                && !$this->writeStreams
+                && !$this->timers->count()
+                && $this->signals->isEmpty();
+
+            // Use UV::RUN_ONCE when there are only I/O events active in the loop and block until one of those triggers,
+            // otherwise use UV::RUN_NOWAIT.
+            // @link http://docs.libuv.org/en/v1.x/loop.html#c.uv_run
+            $flags = \UV::RUN_ONCE;
+            if ($wasJustStopped || $hasPendingCallbacks) {
+                $flags = \UV::RUN_NOWAIT;
+            } elseif ($nothingLeftToDo) {
+                break;
+            }
+
+            \uv_run($this->uv, $flags);
+        }
+    }
+
+    /**
+     * {@inheritdoc}
+     */
+    public function stop()
+    {
+        $this->running = false;
+    }
+
+    private function addStream($stream)
+    {
+        if (!isset($this->streamEvents[(int) $stream])) {
+            $this->streamEvents[(int)$stream] = \uv_poll_init_socket($this->uv, $stream);
+        }
+
+        if ($this->streamEvents[(int) $stream] !== false) {
+            $this->pollStream($stream);
+        }
+    }
+
+    private function removeStream($stream)
+    {
+        if (!isset($this->streamEvents[(int) $stream])) {
+            return;
+        }
+
+        if (!isset($this->readStreams[(int) $stream])
+            && !isset($this->writeStreams[(int) $stream])) {
+            \uv_poll_stop($this->streamEvents[(int) $stream]);
+            \uv_close($this->streamEvents[(int) $stream]);
+            unset($this->streamEvents[(int) $stream]);
+            return;
+        }
+
+        $this->pollStream($stream);
+    }
+
+    private function pollStream($stream)
+    {
+        if (!isset($this->streamEvents[(int) $stream])) {
+            return;
+        }
+
+        $flags = 0;
+        if (isset($this->readStreams[(int) $stream])) {
+            $flags |= \UV::READABLE;
+        }
+
+        if (isset($this->writeStreams[(int) $stream])) {
+            $flags |= \UV::WRITABLE;
+        }
+
+        \uv_poll_start($this->streamEvents[(int) $stream], $flags, $this->streamListener);
+    }
+
+    /**
+     * Create a stream listener
+     *
+     * @return callable Returns a callback
+     */
+    private function createStreamListener()
+    {
+        $callback = function ($event, $status, $events, $stream) {
+            // libuv automatically stops polling on error, re-enable polling to match other loop implementations
+            if ($status !== 0) {
+                $this->pollStream($stream);
+
+                // libuv may report no events on error, but this should still invoke stream listeners to report closed connections
+                // re-enable both readable and writable, correct listeners will be checked below anyway
+                if ($events === 0) {
+                    $events = \UV::READABLE | \UV::WRITABLE;
+                }
+            }
+
+            if (isset($this->readStreams[(int) $stream]) && ($events & \UV::READABLE)) {
+                \call_user_func($this->readStreams[(int) $stream], $stream);
+            }
+
+            if (isset($this->writeStreams[(int) $stream]) && ($events & \UV::WRITABLE)) {
+                \call_user_func($this->writeStreams[(int) $stream], $stream);
+            }
+        };
+
+        return $callback;
+    }
+
+    /**
+     * @param float $interval
+     * @return int
+     */
+    private function convertFloatSecondsToMilliseconds($interval)
+    {
+        if ($interval < 0) {
+            return 0;
+        }
+
+        $maxValue = (int) (\PHP_INT_MAX / 1000);
+        $intInterval = (int) $interval;
+
+        if (($intInterval <= 0 && $interval > 1) || $intInterval >= $maxValue) {
+            throw new \InvalidArgumentException(
+                "Interval overflow, value must be lower than '{$maxValue}', but '{$interval}' passed."
+            );
+        }
+
+        return (int) \floor($interval * 1000);
+    }
+}
diff --git a/src/Factory.php b/src/Factory.php
deleted file mode 100644
index 9a481e35..00000000
--- a/src/Factory.php
+++ /dev/null
@@ -1,21 +0,0 @@
-<?php
-
-namespace React\EventLoop;
-
-class Factory
-{
-    public static function create()
-    {
-        // @codeCoverageIgnoreStart
-        if (function_exists('event_base_new')) {
-            return new LibEventLoop();
-        } elseif (class_exists('libev\EventLoop', false)) {
-            return new LibEvLoop;
-        } elseif (class_exists('EventBase', false)) {
-            return new ExtEventLoop;
-        }
-
-        return new StreamSelectLoop();
-        // @codeCoverageIgnoreEnd
-    }
-}
diff --git a/src/LibEvLoop.php b/src/LibEvLoop.php
deleted file mode 100644
index 38e4ec2c..00000000
--- a/src/LibEvLoop.php
+++ /dev/null
@@ -1,218 +0,0 @@
-<?php
-
-namespace React\EventLoop;
-
-use libev\EventLoop;
-use libev\IOEvent;
-use libev\TimerEvent;
-use React\EventLoop\Tick\FutureTickQueue;
-use React\EventLoop\Tick\NextTickQueue;
-use React\EventLoop\Timer\Timer;
-use React\EventLoop\Timer\TimerInterface;
-use SplObjectStorage;
-
-/**
- * @see https://github.com/m4rw3r/php-libev
- * @see https://gist.github.com/1688204
- */
-class LibEvLoop implements LoopInterface
-{
-    private $loop;
-    private $nextTickQueue;
-    private $futureTickQueue;
-    private $timerEvents;
-    private $readEvents = [];
-    private $writeEvents = [];
-    private $running;
-
-    public function __construct()
-    {
-        $this->loop = new EventLoop();
-        $this->nextTickQueue = new NextTickQueue($this);
-        $this->futureTickQueue = new FutureTickQueue($this);
-        $this->timerEvents = new SplObjectStorage();
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function addReadStream($stream, callable $listener)
-    {
-        $callback = function () use ($stream, $listener) {
-            call_user_func($listener, $stream, $this);
-        };
-
-        $event = new IOEvent($callback, $stream, IOEvent::READ);
-        $this->loop->add($event);
-
-        $this->readEvents[(int) $stream] = $event;
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function addWriteStream($stream, callable $listener)
-    {
-        $callback = function () use ($stream, $listener) {
-            call_user_func($listener, $stream, $this);
-        };
-
-        $event = new IOEvent($callback, $stream, IOEvent::WRITE);
-        $this->loop->add($event);
-
-        $this->writeEvents[(int) $stream] = $event;
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function removeReadStream($stream)
-    {
-        $key = (int) $stream;
-
-        if (isset($this->readEvents[$key])) {
-            $this->readEvents[$key]->stop();
-            unset($this->readEvents[$key]);
-        }
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function removeWriteStream($stream)
-    {
-        $key = (int) $stream;
-
-        if (isset($this->writeEvents[$key])) {
-            $this->writeEvents[$key]->stop();
-            unset($this->writeEvents[$key]);
-        }
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function removeStream($stream)
-    {
-        $this->removeReadStream($stream);
-        $this->removeWriteStream($stream);
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function addTimer($interval, callable $callback)
-    {
-        $timer = new Timer($this, $interval, $callback, false);
-
-        $callback = function () use ($timer) {
-            call_user_func($timer->getCallback(), $timer);
-
-            if ($this->isTimerActive($timer)) {
-                $this->cancelTimer($timer);
-            }
-        };
-
-        $event = new TimerEvent($callback, $timer->getInterval());
-        $this->timerEvents->attach($timer, $event);
-        $this->loop->add($event);
-
-        return $timer;
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function addPeriodicTimer($interval, callable $callback)
-    {
-        $timer = new Timer($this, $interval, $callback, true);
-
-        $callback = function () use ($timer) {
-            call_user_func($timer->getCallback(), $timer);
-        };
-
-        $event = new TimerEvent($callback, $interval, $interval);
-        $this->timerEvents->attach($timer, $event);
-        $this->loop->add($event);
-
-        return $timer;
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function cancelTimer(TimerInterface $timer)
-    {
-        if (isset($this->timerEvents[$timer])) {
-            $this->loop->remove($this->timerEvents[$timer]);
-            $this->timerEvents->detach($timer);
-        }
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function isTimerActive(TimerInterface $timer)
-    {
-        return $this->timerEvents->contains($timer);
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function nextTick(callable $listener)
-    {
-        $this->nextTickQueue->add($listener);
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function futureTick(callable $listener)
-    {
-        $this->futureTickQueue->add($listener);
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function tick()
-    {
-        $this->nextTickQueue->tick();
-
-        $this->futureTickQueue->tick();
-
-        $this->loop->run(EventLoop::RUN_ONCE | EventLoop::RUN_NOWAIT);
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function run()
-    {
-        $this->running = true;
-
-        while ($this->running) {
-            $this->nextTickQueue->tick();
-
-            $this->futureTickQueue->tick();
-
-            $flags = EventLoop::RUN_ONCE;
-            if (!$this->running || !$this->nextTickQueue->isEmpty() || !$this->futureTickQueue->isEmpty()) {
-                $flags |= EventLoop::RUN_NOWAIT;
-            } elseif (!$this->readEvents && !$this->writeEvents && !$this->timerEvents->count()) {
-                break;
-            }
-
-            $this->loop->run($flags);
-        }
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function stop()
-    {
-        $this->running = false;
-    }
-}
diff --git a/src/LibEventLoop.php b/src/LibEventLoop.php
deleted file mode 100644
index 99417a12..00000000
--- a/src/LibEventLoop.php
+++ /dev/null
@@ -1,343 +0,0 @@
-<?php
-
-namespace React\EventLoop;
-
-use Event;
-use EventBase;
-use React\EventLoop\Tick\FutureTickQueue;
-use React\EventLoop\Tick\NextTickQueue;
-use React\EventLoop\Timer\Timer;
-use React\EventLoop\Timer\TimerInterface;
-use SplObjectStorage;
-
-/**
- * An ext-libevent based event-loop.
- */
-class LibEventLoop implements LoopInterface
-{
-    const MICROSECONDS_PER_SECOND = 1000000;
-
-    private $eventBase;
-    private $nextTickQueue;
-    private $futureTickQueue;
-    private $timerCallback;
-    private $timerEvents;
-    private $streamCallback;
-    private $streamEvents = [];
-    private $streamFlags = [];
-    private $readListeners = [];
-    private $writeListeners = [];
-    private $running;
-
-    public function __construct()
-    {
-        $this->eventBase = event_base_new();
-        $this->nextTickQueue = new NextTickQueue($this);
-        $this->futureTickQueue = new FutureTickQueue($this);
-        $this->timerEvents = new SplObjectStorage();
-
-        $this->createTimerCallback();
-        $this->createStreamCallback();
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function addReadStream($stream, callable $listener)
-    {
-        $key = (int) $stream;
-
-        if (!isset($this->readListeners[$key])) {
-            $this->readListeners[$key] = $listener;
-            $this->subscribeStreamEvent($stream, EV_READ);
-        }
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function addWriteStream($stream, callable $listener)
-    {
-        $key = (int) $stream;
-
-        if (!isset($this->writeListeners[$key])) {
-            $this->writeListeners[$key] = $listener;
-            $this->subscribeStreamEvent($stream, EV_WRITE);
-        }
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function removeReadStream($stream)
-    {
-        $key = (int) $stream;
-
-        if (isset($this->readListeners[$key])) {
-            unset($this->readListeners[$key]);
-            $this->unsubscribeStreamEvent($stream, EV_READ);
-        }
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function removeWriteStream($stream)
-    {
-        $key = (int) $stream;
-
-        if (isset($this->writeListeners[$key])) {
-            unset($this->writeListeners[$key]);
-            $this->unsubscribeStreamEvent($stream, EV_WRITE);
-        }
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function removeStream($stream)
-    {
-        $key = (int) $stream;
-
-        if (isset($this->streamEvents[$key])) {
-            $event = $this->streamEvents[$key];
-
-            event_del($event);
-            event_free($event);
-
-            unset(
-                $this->streamFlags[$key],
-                $this->streamEvents[$key],
-                $this->readListeners[$key],
-                $this->writeListeners[$key]
-            );
-        }
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function addTimer($interval, callable $callback)
-    {
-        $timer = new Timer($this, $interval, $callback, false);
-
-        $this->scheduleTimer($timer);
-
-        return $timer;
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function addPeriodicTimer($interval, callable $callback)
-    {
-        $timer = new Timer($this, $interval, $callback, true);
-
-        $this->scheduleTimer($timer);
-
-        return $timer;
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function cancelTimer(TimerInterface $timer)
-    {
-        if ($this->isTimerActive($timer)) {
-            $event = $this->timerEvents[$timer];
-
-            event_del($event);
-            event_free($event);
-
-            $this->timerEvents->detach($timer);
-        }
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function isTimerActive(TimerInterface $timer)
-    {
-        return $this->timerEvents->contains($timer);
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function nextTick(callable $listener)
-    {
-        $this->nextTickQueue->add($listener);
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function futureTick(callable $listener)
-    {
-        $this->futureTickQueue->add($listener);
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function tick()
-    {
-        $this->nextTickQueue->tick();
-
-        $this->futureTickQueue->tick();
-
-        event_base_loop($this->eventBase, EVLOOP_ONCE | EVLOOP_NONBLOCK);
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function run()
-    {
-        $this->running = true;
-
-        while ($this->running) {
-            $this->nextTickQueue->tick();
-
-            $this->futureTickQueue->tick();
-
-            $flags = EVLOOP_ONCE;
-            if (!$this->running || !$this->nextTickQueue->isEmpty() || !$this->futureTickQueue->isEmpty()) {
-                $flags |= EVLOOP_NONBLOCK;
-            } elseif (!$this->streamEvents && !$this->timerEvents->count()) {
-                break;
-            }
-
-            event_base_loop($this->eventBase, $flags);
-        }
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function stop()
-    {
-        $this->running = false;
-    }
-
-    /**
-     * Schedule a timer for execution.
-     *
-     * @param TimerInterface $timer
-     */
-    private function scheduleTimer(TimerInterface $timer)
-    {
-        $this->timerEvents[$timer] = $event = event_timer_new();
-
-        event_timer_set($event, $this->timerCallback, $timer);
-        event_base_set($event, $this->eventBase);
-        event_add($event, $timer->getInterval() * self::MICROSECONDS_PER_SECOND);
-    }
-
-    /**
-     * Create a new ext-libevent event resource, or update the existing one.
-     *
-     * @param resource $stream
-     * @param integer  $flag   EV_READ or EV_WRITE
-     */
-    private function subscribeStreamEvent($stream, $flag)
-    {
-        $key = (int) $stream;
-
-        if (isset($this->streamEvents[$key])) {
-            $event = $this->streamEvents[$key];
-            $flags = $this->streamFlags[$key] |= $flag;
-
-            event_del($event);
-            event_set($event, $stream, EV_PERSIST | $flags, $this->streamCallback);
-        } else {
-            $event = event_new();
-
-            event_set($event, $stream, EV_PERSIST | $flag, $this->streamCallback);
-            event_base_set($event, $this->eventBase);
-
-            $this->streamEvents[$key] = $event;
-            $this->streamFlags[$key] = $flag;
-        }
-
-        event_add($event);
-    }
-
-    /**
-     * Update the ext-libevent event resource for this stream to stop listening to
-     * the given event type, or remove it entirely if it's no longer needed.
-     *
-     * @param resource $stream
-     * @param integer  $flag   EV_READ or EV_WRITE
-     */
-    private function unsubscribeStreamEvent($stream, $flag)
-    {
-        $key = (int) $stream;
-
-        $flags = $this->streamFlags[$key] &= ~$flag;
-
-        if (0 === $flags) {
-            $this->removeStream($stream);
-
-            return;
-        }
-
-        $event = $this->streamEvents[$key];
-
-        event_del($event);
-        event_set($event, $stream, EV_PERSIST | $flags, $this->streamCallback);
-        event_add($event);
-    }
-
-    /**
-     * Create a callback used as the target of timer events.
-     *
-     * A reference is kept to the callback for the lifetime of the loop
-     * to prevent "Cannot destroy active lambda function" fatal error from
-     * the event extension.
-     */
-    private function createTimerCallback()
-    {
-        $this->timerCallback = function ($_, $__, $timer) {
-            call_user_func($timer->getCallback(), $timer);
-
-            // Timer already cancelled ...
-            if (!$this->isTimerActive($timer)) {
-                return;
-
-            // Reschedule periodic timers ...
-            } elseif ($timer->isPeriodic()) {
-                event_add(
-                    $this->timerEvents[$timer],
-                    $timer->getInterval() * self::MICROSECONDS_PER_SECOND
-                );
-
-            // Clean-up one shot timers ...
-            } else {
-                $this->cancelTimer($timer);
-            }
-        };
-    }
-
-    /**
-     * Create a callback used as the target of stream events.
-     *
-     * A reference is kept to the callback for the lifetime of the loop
-     * to prevent "Cannot destroy active lambda function" fatal error from
-     * the event extension.
-     */
-    private function createStreamCallback()
-    {
-        $this->streamCallback = function ($stream, $flags) {
-            $key = (int) $stream;
-
-            if (EV_READ === (EV_READ & $flags) && isset($this->readListeners[$key])) {
-                call_user_func($this->readListeners[$key], $stream, $this);
-            }
-
-            if (EV_WRITE === (EV_WRITE & $flags) && isset($this->writeListeners[$key])) {
-                call_user_func($this->writeListeners[$key], $stream, $this);
-            }
-        };
-    }
-}
diff --git a/src/Loop.php b/src/Loop.php
new file mode 100644
index 00000000..732c5d5e
--- /dev/null
+++ b/src/Loop.php
@@ -0,0 +1,256 @@
+<?php
+
+namespace React\EventLoop;
+
+/**
+ * The `Loop` class exists as a convenient way to get the currently relevant loop
+ */
+final class Loop
+{
+    /**
+     * @var ?LoopInterface
+     */
+    private static $instance;
+
+    /** @var bool */
+    private static $stopped = false;
+
+    /**
+     * Returns the event loop.
+     * When no loop is set, it will call the factory to create one.
+     *
+     * This method always returns an instance implementing `LoopInterface`,
+     * the actual event loop implementation is an implementation detail.
+     *
+     * This method is the preferred way to get the event loop and using
+     * Factory::create has been deprecated.
+     *
+     * @return LoopInterface
+     */
+    public static function get()
+    {
+        if (self::$instance instanceof LoopInterface) {
+            return self::$instance;
+        }
+
+        self::$instance = $loop = self::create();
+
+        // Automatically run loop at end of program, unless already started or stopped explicitly.
+        // This is tested using child processes, so coverage is actually 100%, see BinTest.
+        // @codeCoverageIgnoreStart
+        $hasRun = false;
+        $loop->futureTick(function () use (&$hasRun) {
+            $hasRun = true;
+        });
+
+        register_shutdown_function(function () use ($loop, &$hasRun) {
+            // Don't run if we're coming from a fatal error (uncaught exception).
+            $error = error_get_last();
+            if (($error['type'] ?? 0) & (E_ERROR | E_CORE_ERROR | E_COMPILE_ERROR | E_USER_ERROR | E_RECOVERABLE_ERROR)) {
+                return;
+            }
+
+            if (!$hasRun && !self::$stopped) {
+                $loop->run();
+            }
+        });
+        // @codeCoverageIgnoreEnd
+
+        return self::$instance;
+    }
+
+    /**
+     * Internal undocumented method, behavior might change or throw in the
+     * future. Use with caution and at your own risk.
+     *
+     * @internal
+     * @return void
+     */
+    public static function set(LoopInterface $loop)
+    {
+        self::$instance = $loop;
+    }
+
+    /**
+     * [Advanced] Register a listener to be notified when a stream is ready to read.
+     *
+     * @param resource $stream
+     * @param callable $listener
+     * @return void
+     * @throws \Exception
+     * @see LoopInterface::addReadStream()
+     */
+    public static function addReadStream($stream, $listener)
+    {
+        (self::$instance ?? self::get())->addReadStream($stream, $listener);
+    }
+
+    /**
+     * [Advanced] Register a listener to be notified when a stream is ready to write.
+     *
+     * @param resource $stream
+     * @param callable $listener
+     * @return void
+     * @throws \Exception
+     * @see LoopInterface::addWriteStream()
+     */
+    public static function addWriteStream($stream, $listener)
+    {
+        (self::$instance ?? self::get())->addWriteStream($stream, $listener);
+    }
+
+    /**
+     * Remove the read event listener for the given stream.
+     *
+     * @param resource $stream
+     * @return void
+     * @see LoopInterface::removeReadStream()
+     */
+    public static function removeReadStream($stream)
+    {
+        if (self::$instance !== null) {
+            self::$instance->removeReadStream($stream);
+        }
+    }
+
+    /**
+     * Remove the write event listener for the given stream.
+     *
+     * @param resource $stream
+     * @return void
+     * @see LoopInterface::removeWriteStream()
+     */
+    public static function removeWriteStream($stream)
+    {
+        if (self::$instance !== null) {
+            self::$instance->removeWriteStream($stream);
+        }
+    }
+
+    /**
+     * Enqueue a callback to be invoked once after the given interval.
+     *
+     * @param float $interval
+     * @param callable $callback
+     * @return TimerInterface
+     * @see LoopInterface::addTimer()
+     */
+    public static function addTimer($interval, $callback)
+    {
+        return (self::$instance ?? self::get())->addTimer($interval, $callback);
+    }
+
+    /**
+     * Enqueue a callback to be invoked repeatedly after the given interval.
+     *
+     * @param float $interval
+     * @param callable $callback
+     * @return TimerInterface
+     * @see LoopInterface::addPeriodicTimer()
+     */
+    public static function addPeriodicTimer($interval, $callback)
+    {
+        return (self::$instance ?? self::get())->addPeriodicTimer($interval, $callback);
+    }
+
+    /**
+     * Cancel a pending timer.
+     *
+     * @param TimerInterface $timer
+     * @return void
+     * @see LoopInterface::cancelTimer()
+     */
+    public static function cancelTimer(TimerInterface $timer)
+    {
+        if (self::$instance !== null) {
+            self::$instance->cancelTimer($timer);
+        }
+    }
+
+    /**
+     * Schedule a callback to be invoked on a future tick of the event loop.
+     *
+     * @param callable $listener
+     * @return void
+     * @see LoopInterface::futureTick()
+     */
+    public static function futureTick($listener)
+    {
+        (self::$instance ?? self::get())->futureTick($listener);
+    }
+
+    /**
+     * Register a listener to be notified when a signal has been caught by this process.
+     *
+     * @param int $signal
+     * @param callable $listener
+     * @return void
+     * @see LoopInterface::addSignal()
+     */
+    public static function addSignal($signal, $listener)
+    {
+        (self::$instance ?? self::get())->addSignal($signal, $listener);
+    }
+
+    /**
+     * Removes a previously added signal listener.
+     *
+     * @param int $signal
+     * @param callable $listener
+     * @return void
+     * @see LoopInterface::removeSignal()
+     */
+    public static function removeSignal($signal, $listener)
+    {
+        if (self::$instance !== null) {
+            self::$instance->removeSignal($signal, $listener);
+        }
+    }
+
+    /**
+     * Run the event loop until there are no more tasks to perform.
+     *
+     * @return void
+     * @see LoopInterface::run()
+     */
+    public static function run()
+    {
+        (self::$instance ?? self::get())->run();
+    }
+
+    /**
+     * Instruct a running event loop to stop.
+     *
+     * @return void
+     * @see LoopInterface::stop()
+     */
+    public static function stop()
+    {
+        self::$stopped = true;
+        if (self::$instance !== null) {
+            self::$instance->stop();
+        }
+    }
+
+    /**
+     * @return LoopInterface
+     */
+    private static function create()
+    {
+        // @codeCoverageIgnoreStart
+        if (\function_exists('uv_loop_new')) {
+            return new ExtUvLoop();
+        }
+
+        if (\class_exists('EvLoop', false)) {
+            return new ExtEvLoop();
+        }
+
+        if (\class_exists('EventBase', false)) {
+            return new ExtEventLoop();
+        }
+
+        return new StreamSelectLoop();
+        // @codeCoverageIgnoreEnd
+    }
+}
diff --git a/src/LoopInterface.php b/src/LoopInterface.php
index d046526c..9266f718 100644
--- a/src/LoopInterface.php
+++ b/src/LoopInterface.php
@@ -2,29 +2,122 @@
 
 namespace React\EventLoop;
 
-use React\EventLoop\Timer\TimerInterface;
-
 interface LoopInterface
 {
     /**
-     * Register a listener to be notified when a stream is ready to read.
+     * [Advanced] Register a listener to be notified when a stream is ready to read.
+     *
+     * Note that this low-level API is considered advanced usage.
+     * Most use cases should probably use the higher-level
+     * [readable Stream API](https://github.com/reactphp/stream#readablestreaminterface)
+     * instead.
+     *
+     * The first parameter MUST be a valid stream resource that supports
+     * checking whether it is ready to read by this loop implementation.
+     * A single stream resource MUST NOT be added more than once.
+     * Instead, either call [`removeReadStream()`](#removereadstream) first or
+     * react to this event with a single listener and then dispatch from this
+     * listener. This method MAY throw an `Exception` if the given resource type
+     * is not supported by this loop implementation.
+     *
+     * The second parameter MUST be a listener callback function that accepts
+     * the stream resource as its only parameter.
+     * If you don't use the stream resource inside your listener callback function
+     * you MAY use a function which has no parameters at all.
+     *
+     * The listener callback function MUST NOT throw an `Exception`.
+     * The return value of the listener callback function will be ignored and has
+     * no effect, so for performance reasons you're recommended to not return
+     * any excessive data structures.
+     *
+     * If you want to access any variables within your callback function, you
+     * can bind arbitrary data to a callback closure like this:
+     *
+     * ```php
+     * $loop->addReadStream($stream, function ($stream) use ($name) {
+     *     echo $name . ' said: ' . fread($stream);
+     * });
+     * ```
+     *
+     * See also [example #11](examples).
+     *
+     * You can invoke [`removeReadStream()`](#removereadstream) to remove the
+     * read event listener for this stream.
+     *
+     * The execution order of listeners when multiple streams become ready at
+     * the same time is not guaranteed.
      *
      * @param resource $stream   The PHP stream resource to check.
      * @param callable $listener Invoked when the stream is ready.
+     * @throws \Exception if the given resource type is not supported by this loop implementation
+     * @see self::removeReadStream()
      */
-    public function addReadStream($stream, callable $listener);
+    public function addReadStream($stream, $listener);
 
     /**
-     * Register a listener to be notified when a stream is ready to write.
+     * [Advanced] Register a listener to be notified when a stream is ready to write.
+     *
+     * Note that this low-level API is considered advanced usage.
+     * Most use cases should probably use the higher-level
+     * [writable Stream API](https://github.com/reactphp/stream#writablestreaminterface)
+     * instead.
+     *
+     * The first parameter MUST be a valid stream resource that supports
+     * checking whether it is ready to write by this loop implementation.
+     * A single stream resource MUST NOT be added more than once.
+     * Instead, either call [`removeWriteStream()`](#removewritestream) first or
+     * react to this event with a single listener and then dispatch from this
+     * listener. This method MAY throw an `Exception` if the given resource type
+     * is not supported by this loop implementation.
+     *
+     * The second parameter MUST be a listener callback function that accepts
+     * the stream resource as its only parameter.
+     * If you don't use the stream resource inside your listener callback function
+     * you MAY use a function which has no parameters at all.
+     *
+     * The listener callback function MUST NOT throw an `Exception`.
+     * The return value of the listener callback function will be ignored and has
+     * no effect, so for performance reasons you're recommended to not return
+     * any excessive data structures.
+     *
+     * If you want to access any variables within your callback function, you
+     * can bind arbitrary data to a callback closure like this:
+     *
+     * ```php
+     * $loop->addWriteStream($stream, function ($stream) use ($name) {
+     *     fwrite($stream, 'Hello ' . $name);
+     * });
+     * ```
+     *
+     * See also [example #12](examples).
+     *
+     * You can invoke [`removeWriteStream()`](#removewritestream) to remove the
+     * write event listener for this stream.
+     *
+     * The execution order of listeners when multiple streams become ready at
+     * the same time is not guaranteed.
+     *
+     * Some event loop implementations are known to only trigger the listener if
+     * the stream *becomes* readable (edge-triggered) and may not trigger if the
+     * stream has already been readable from the beginning.
+     * This also implies that a stream may not be recognized as readable when data
+     * is still left in PHP's internal stream buffers.
+     * As such, it's recommended to use `stream_set_read_buffer($stream, 0);`
+     * to disable PHP's internal read buffer in this case.
      *
      * @param resource $stream   The PHP stream resource to check.
      * @param callable $listener Invoked when the stream is ready.
+     * @throws \Exception if the given resource type is not supported by this loop implementation
+     * @see self::removeWriteStream()
      */
-    public function addWriteStream($stream, callable $listener);
+    public function addWriteStream($stream, $listener);
 
     /**
      * Remove the read event listener for the given stream.
      *
+     * Removing a stream from the loop that has already been removed or trying
+     * to remove a stream that was never added or is invalid has no effect.
+     *
      * @param resource $stream The PHP stream resource.
      */
     public function removeReadStream($stream);
@@ -32,90 +125,348 @@ public function removeReadStream($stream);
     /**
      * Remove the write event listener for the given stream.
      *
-     * @param resource $stream The PHP stream resource.
-     */
-    public function removeWriteStream($stream);
-
-    /**
-     * Remove all listeners for the given stream.
+     * Removing a stream from the loop that has already been removed or trying
+     * to remove a stream that was never added or is invalid has no effect.
      *
      * @param resource $stream The PHP stream resource.
      */
-    public function removeStream($stream);
+    public function removeWriteStream($stream);
 
     /**
      * Enqueue a callback to be invoked once after the given interval.
      *
-     * The execution order of timers scheduled to execute at the same time is
-     * not guaranteed.
+     * The second parameter MUST be a timer callback function that accepts
+     * the timer instance as its only parameter.
+     * If you don't use the timer instance inside your timer callback function
+     * you MAY use a function which has no parameters at all.
+     *
+     * The timer callback function MUST NOT throw an `Exception`.
+     * The return value of the timer callback function will be ignored and has
+     * no effect, so for performance reasons you're recommended to not return
+     * any excessive data structures.
+     *
+     * This method returns a timer instance. The same timer instance will also be
+     * passed into the timer callback function as described above.
+     * You can invoke [`cancelTimer`](#canceltimer) to cancel a pending timer.
+     * Unlike [`addPeriodicTimer()`](#addperiodictimer), this method will ensure
+     * the callback will be invoked only once after the given interval.
+     *
+     * ```php
+     * $loop->addTimer(0.8, function () {
+     *     echo 'world!' . PHP_EOL;
+     * });
+     *
+     * $loop->addTimer(0.3, function () {
+     *     echo 'hello ';
+     * });
+     * ```
+     *
+     * See also [example #1](examples).
+     *
+     * If you want to access any variables within your callback function, you
+     * can bind arbitrary data to a callback closure like this:
+     *
+     * ```php
+     * function hello($name, LoopInterface $loop)
+     * {
+     *     $loop->addTimer(1.0, function () use ($name) {
+     *         echo "hello $name\n";
+     *     });
+     * }
+     *
+     * hello('Tester', $loop);
+     * ```
+     *
+     * This interface does not enforce any particular timer resolution, so
+     * special care may have to be taken if you rely on very high precision with
+     * millisecond accuracy or below. Event loop implementations SHOULD work on
+     * a best effort basis and SHOULD provide at least millisecond accuracy
+     * unless otherwise noted. Many existing event loop implementations are
+     * known to provide microsecond accuracy, but it's generally not recommended
+     * to rely on this high precision.
+     *
+     * Similarly, the execution order of timers scheduled to execute at the
+     * same time (within its possible accuracy) is not guaranteed.
+     *
+     * This interface suggests that event loop implementations SHOULD use a
+     * monotonic time source if available. Given that a monotonic time source is
+     * only available as of PHP 7.3 by default, event loop implementations MAY
+     * fall back to using wall-clock time.
+     * While this does not affect many common use cases, this is an important
+     * distinction for programs that rely on a high time precision or on systems
+     * that are subject to discontinuous time adjustments (time jumps).
+     * This means that if you schedule a timer to trigger in 30s and then adjust
+     * your system time forward by 20s, the timer SHOULD still trigger in 30s.
+     * See also [event loop implementations](#loop-implementations) for more details.
      *
      * @param int|float $interval The number of seconds to wait before execution.
      * @param callable  $callback The callback to invoke.
      *
      * @return TimerInterface
      */
-    public function addTimer($interval, callable $callback);
+    public function addTimer($interval, $callback);
 
     /**
      * Enqueue a callback to be invoked repeatedly after the given interval.
      *
-     * The execution order of timers scheduled to execute at the same time is
-     * not guaranteed.
+     * The second parameter MUST be a timer callback function that accepts
+     * the timer instance as its only parameter.
+     * If you don't use the timer instance inside your timer callback function
+     * you MAY use a function which has no parameters at all.
+     *
+     * The timer callback function MUST NOT throw an `Exception`.
+     * The return value of the timer callback function will be ignored and has
+     * no effect, so for performance reasons you're recommended to not return
+     * any excessive data structures.
+     *
+     * This method returns a timer instance. The same timer instance will also be
+     * passed into the timer callback function as described above.
+     * Unlike [`addTimer()`](#addtimer), this method will ensure the callback
+     * will be invoked infinitely after the given interval or until you invoke
+     * [`cancelTimer`](#canceltimer).
+     *
+     * ```php
+     * $timer = $loop->addPeriodicTimer(0.1, function () {
+     *     echo 'tick!' . PHP_EOL;
+     * });
+     *
+     * $loop->addTimer(1.0, function () use ($loop, $timer) {
+     *     $loop->cancelTimer($timer);
+     *     echo 'Done' . PHP_EOL;
+     * });
+     * ```
+     *
+     * See also [example #2](examples).
+     *
+     * If you want to limit the number of executions, you can bind
+     * arbitrary data to a callback closure like this:
+     *
+     * ```php
+     * function hello($name, LoopInterface $loop)
+     * {
+     *     $n = 3;
+     *     $loop->addPeriodicTimer(1.0, function ($timer) use ($name, $loop, &$n) {
+     *         if ($n > 0) {
+     *             --$n;
+     *             echo "hello $name\n";
+     *         } else {
+     *             $loop->cancelTimer($timer);
+     *         }
+     *     });
+     * }
+     *
+     * hello('Tester', $loop);
+     * ```
+     *
+     * This interface does not enforce any particular timer resolution, so
+     * special care may have to be taken if you rely on very high precision with
+     * millisecond accuracy or below. Event loop implementations SHOULD work on
+     * a best effort basis and SHOULD provide at least millisecond accuracy
+     * unless otherwise noted. Many existing event loop implementations are
+     * known to provide microsecond accuracy, but it's generally not recommended
+     * to rely on this high precision.
+     *
+     * Similarly, the execution order of timers scheduled to execute at the
+     * same time (within its possible accuracy) is not guaranteed.
+     *
+     * This interface suggests that event loop implementations SHOULD use a
+     * monotonic time source if available. Given that a monotonic time source is
+     * only available as of PHP 7.3 by default, event loop implementations MAY
+     * fall back to using wall-clock time.
+     * While this does not affect many common use cases, this is an important
+     * distinction for programs that rely on a high time precision or on systems
+     * that are subject to discontinuous time adjustments (time jumps).
+     * This means that if you schedule a timer to trigger in 30s and then adjust
+     * your system time forward by 20s, the timer SHOULD still trigger in 30s.
+     * See also [event loop implementations](#loop-implementations) for more details.
+     *
+     * Additionally, periodic timers may be subject to timer drift due to
+     * re-scheduling after each invocation. As such, it's generally not
+     * recommended to rely on this for high precision intervals with millisecond
+     * accuracy or below.
      *
      * @param int|float $interval The number of seconds to wait before execution.
      * @param callable  $callback The callback to invoke.
      *
      * @return TimerInterface
      */
-    public function addPeriodicTimer($interval, callable $callback);
+    public function addPeriodicTimer($interval, $callback);
 
     /**
      * Cancel a pending timer.
      *
+     * See also [`addPeriodicTimer()`](#addperiodictimer) and [example #2](examples).
+     *
+     * Calling this method on a timer instance that has not been added to this
+     * loop instance or on a timer that has already been cancelled has no effect.
+     *
      * @param TimerInterface $timer The timer to cancel.
+     *
+     * @return void
      */
     public function cancelTimer(TimerInterface $timer);
 
     /**
-     * Check if a given timer is active.
+     * Schedule a callback to be invoked on a future tick of the event loop.
      *
-     * @param TimerInterface $timer The timer to check.
+     * This works very much similar to timers with an interval of zero seconds,
+     * but does not require the overhead of scheduling a timer queue.
      *
-     * @return boolean True if the timer is still enqueued for execution.
-     */
-    public function isTimerActive(TimerInterface $timer);
-
-    /**
-     * Schedule a callback to be invoked on the next tick of the event loop.
+     * The tick callback function MUST be able to accept zero parameters.
      *
-     * Callbacks are guaranteed to be executed in the order they are enqueued,
-     * before any timer or stream events.
+     * The tick callback function MUST NOT throw an `Exception`.
+     * The return value of the tick callback function will be ignored and has
+     * no effect, so for performance reasons you're recommended to not return
+     * any excessive data structures.
+     *
+     * If you want to access any variables within your callback function, you
+     * can bind arbitrary data to a callback closure like this:
+     *
+     * ```php
+     * function hello($name, LoopInterface $loop)
+     * {
+     *     $loop->futureTick(function () use ($name) {
+     *         echo "hello $name\n";
+     *     });
+     * }
+     *
+     * hello('Tester', $loop);
+     * ```
+     *
+     * Unlike timers, tick callbacks are guaranteed to be executed in the order
+     * they are enqueued.
+     * Also, once a callback is enqueued, there's no way to cancel this operation.
+     *
+     * This is often used to break down bigger tasks into smaller steps (a form
+     * of cooperative multitasking).
+     *
+     * ```php
+     * $loop->futureTick(function () {
+     *     echo 'b';
+     * });
+     * $loop->futureTick(function () {
+     *     echo 'c';
+     * });
+     * echo 'a';
+     * ```
+     *
+     * See also [example #3](examples).
      *
      * @param callable $listener The callback to invoke.
+     *
+     * @return void
      */
-    public function nextTick(callable $listener);
+    public function futureTick($listener);
 
     /**
-     * Schedule a callback to be invoked on a future tick of the event loop.
+     * Register a listener to be notified when a signal has been caught by this process.
      *
-     * Callbacks are guaranteed to be executed in the order they are enqueued.
+     * This is useful to catch user interrupt signals or shutdown signals from
+     * tools like `supervisor` or `systemd`.
      *
-     * @param callable $listener The callback to invoke.
+     * The second parameter MUST be a listener callback function that accepts
+     * the signal as its only parameter.
+     * If you don't use the signal inside your listener callback function
+     * you MAY use a function which has no parameters at all.
+     *
+     * The listener callback function MUST NOT throw an `Exception`.
+     * The return value of the listener callback function will be ignored and has
+     * no effect, so for performance reasons you're recommended to not return
+     * any excessive data structures.
+     *
+     * ```php
+     * $loop->addSignal(SIGINT, function (int $signal) {
+     *     echo 'Caught user interrupt signal' . PHP_EOL;
+     * });
+     * ```
+     *
+     * See also [example #4](examples).
+     *
+     * Signaling is only available on Unix-like platforms, Windows isn't
+     * supported due to operating system limitations.
+     * This method may throw a `BadMethodCallException` if signals aren't
+     * supported on this platform, for example when required extensions are
+     * missing.
+     *
+     * **Note: A listener can only be added once to the same signal, any
+     * attempts to add it more than once will be ignored.**
+     *
+     * @param int $signal
+     * @param callable $listener
+     *
+     * @throws \BadMethodCallException when signals aren't supported on this
+     *     platform, for example when required extensions are missing.
+     *
+     * @return void
      */
-    public function futureTick(callable $listener);
+    public function addSignal($signal, $listener);
 
     /**
-     * Perform a single iteration of the event loop.
+     * Removes a previously added signal listener.
+     *
+     * ```php
+     * $loop->removeSignal(SIGINT, $listener);
+     * ```
+     *
+     * Any attempts to remove listeners that aren't registered will be ignored.
+     *
+     * @param int $signal
+     * @param callable $listener
+     *
+     * @return void
      */
-    public function tick();
+    public function removeSignal($signal, $listener);
 
     /**
      * Run the event loop until there are no more tasks to perform.
+     *
+     * For many applications, this method is the only directly visible
+     * invocation on the event loop.
+     * As a rule of thumb, it is usually recommended to attach everything to the
+     * same loop instance and then run the loop once at the bottom end of the
+     * application.
+     *
+     * ```php
+     * $loop->run();
+     * ```
+     *
+     * This method will keep the loop running until there are no more tasks
+     * to perform. In other words: This method will block until the last
+     * timer, stream and/or signal has been removed.
+     *
+     * Likewise, it is imperative to ensure the application actually invokes
+     * this method once. Adding listeners to the loop and missing to actually
+     * run it will result in the application exiting without actually waiting
+     * for any of the attached listeners.
+     *
+     * This method MUST NOT be called while the loop is already running.
+     * This method MAY be called more than once after it has explicitly been
+     * [`stop()`ped](#stop) or after it automatically stopped because it
+     * previously did no longer have anything to do.
+     *
+     * @return void
      */
     public function run();
 
     /**
      * Instruct a running event loop to stop.
+     *
+     * This method is considered advanced usage and should be used with care.
+     * As a rule of thumb, it is usually recommended to let the loop stop
+     * only automatically when it no longer has anything to do.
+     *
+     * This method can be used to explicitly instruct the event loop to stop:
+     *
+     * ```php
+     * $loop->addTimer(3.0, function () use ($loop) {
+     *     $loop->stop();
+     * });
+     * ```
+     *
+     * Calling this method on a loop instance that is not currently running or
+     * on a loop instance that has already been stopped has no effect.
+     *
+     * @return void
      */
     public function stop();
 }
diff --git a/src/SignalsHandler.php b/src/SignalsHandler.php
new file mode 100644
index 00000000..e9b245ea
--- /dev/null
+++ b/src/SignalsHandler.php
@@ -0,0 +1,63 @@
+<?php
+
+namespace React\EventLoop;
+
+/**
+ * @internal
+ */
+final class SignalsHandler
+{
+    private $signals = [];
+
+    public function add($signal, $listener)
+    {
+        if (!isset($this->signals[$signal])) {
+            $this->signals[$signal] = [];
+        }
+
+        if (\in_array($listener, $this->signals[$signal])) {
+            return;
+        }
+
+        $this->signals[$signal][] = $listener;
+    }
+
+    public function remove($signal, $listener)
+    {
+        if (!isset($this->signals[$signal])) {
+            return;
+        }
+
+        $index = \array_search($listener, $this->signals[$signal], true);
+        unset($this->signals[$signal][$index]);
+
+        if (isset($this->signals[$signal]) && \count($this->signals[$signal]) === 0) {
+            unset($this->signals[$signal]);
+        }
+    }
+
+    public function call($signal)
+    {
+        if (!isset($this->signals[$signal])) {
+            return;
+        }
+
+        foreach ($this->signals[$signal] as $listener) {
+            \call_user_func($listener, $signal);
+        }
+    }
+
+    public function count($signal)
+    {
+        if (!isset($this->signals[$signal])) {
+            return 0;
+        }
+
+        return \count($this->signals[$signal]);
+    }
+
+    public function isEmpty()
+    {
+        return !$this->signals;
+    }
+}
diff --git a/src/StreamSelectLoop.php b/src/StreamSelectLoop.php
index e51a27f8..41dd2cb3 100644
--- a/src/StreamSelectLoop.php
+++ b/src/StreamSelectLoop.php
@@ -3,19 +3,57 @@
 namespace React\EventLoop;
 
 use React\EventLoop\Tick\FutureTickQueue;
-use React\EventLoop\Tick\NextTickQueue;
 use React\EventLoop\Timer\Timer;
-use React\EventLoop\Timer\TimerInterface;
 use React\EventLoop\Timer\Timers;
 
 /**
- * A stream_select() based event-loop.
+ * A `stream_select()` based event loop.
+ *
+ * This uses the [`stream_select()`](https://www.php.net/manual/en/function.stream-select.php)
+ * function and is the only implementation that works out of the box with PHP.
+ *
+ * This event loop works out of the box on any PHP version.
+ * This means that no installation is required and this library works on all
+ * platforms and supported PHP versions.
+ * Accordingly, the [`Loop` class](#loop) will use this event loop by default if
+ * you do not install any of the event loop extensions listed below.
+ *
+ * Under the hood, it does a simple `select` system call.
+ * This system call is limited to the maximum file descriptor number of
+ * `FD_SETSIZE` (platform dependent, commonly 1024) and scales with `O(m)`
+ * (`m` being the maximum file descriptor number passed).
+ * This means that you may run into issues when handling thousands of streams
+ * concurrently and you may want to look into using one of the alternative
+ * event loop implementations listed below in this case.
+ * If your use case is among the many common use cases that involve handling only
+ * dozens or a few hundred streams at once, then this event loop implementation
+ * performs really well.
+ *
+ * If you want to use signal handling (see also [`addSignal()`](#addsignal) below),
+ * this event loop implementation requires `ext-pcntl`.
+ * This extension is only available for Unix-like platforms and does not support
+ * Windows.
+ * It is commonly installed as part of many PHP distributions.
+ * If this extension is missing (or you're running on Windows), signal handling is
+ * not supported and throws a `BadMethodCallException` instead.
+ *
+ * This event loop is known to rely on wall-clock time to schedule future timers
+ * when using any version before PHP 7.3, because a monotonic time source is
+ * only available as of PHP 7.3 (`hrtime()`).
+ * While this does not affect many common use cases, this is an important
+ * distinction for programs that rely on a high time precision or on systems
+ * that are subject to discontinuous time adjustments (time jumps).
+ * This means that if you schedule a timer to trigger in 30s on PHP < 7.3 and
+ * then adjust your system time forward by 20s, the timer may trigger in 10s.
+ * See also [`addTimer()`](#addtimer) for more details.
+ *
+ * @link https://www.php.net/manual/en/function.stream-select.php
  */
-class StreamSelectLoop implements LoopInterface
+final class StreamSelectLoop implements LoopInterface
 {
+    /** @internal */
     const MICROSECONDS_PER_SECOND = 1000000;
 
-    private $nextTickQueue;
     private $futureTickQueue;
     private $timers;
     private $readStreams = [];
@@ -23,18 +61,25 @@ class StreamSelectLoop implements LoopInterface
     private $writeStreams = [];
     private $writeListeners = [];
     private $running;
+    private $pcntl = false;
+    private $pcntlPoll = false;
+    private $signals;
 
     public function __construct()
     {
-        $this->nextTickQueue = new NextTickQueue($this);
-        $this->futureTickQueue = new FutureTickQueue($this);
+        $this->futureTickQueue = new FutureTickQueue();
         $this->timers = new Timers();
+        $this->pcntl = \function_exists('pcntl_signal') && \function_exists('pcntl_signal_dispatch');
+        $this->pcntlPoll = $this->pcntl && !\function_exists('pcntl_async_signals');
+        $this->signals = new SignalsHandler();
+
+        // prefer async signals if available (PHP 7.1+) or fall back to dispatching on each tick
+        if ($this->pcntl && !$this->pcntlPoll) {
+            \pcntl_async_signals(true);
+        }
     }
 
-    /**
-     * {@inheritdoc}
-     */
-    public function addReadStream($stream, callable $listener)
+    public function addReadStream($stream, $listener)
     {
         $key = (int) $stream;
 
@@ -44,10 +89,7 @@ public function addReadStream($stream, callable $listener)
         }
     }
 
-    /**
-     * {@inheritdoc}
-     */
-    public function addWriteStream($stream, callable $listener)
+    public function addWriteStream($stream, $listener)
     {
         $key = (int) $stream;
 
@@ -57,9 +99,6 @@ public function addWriteStream($stream, callable $listener)
         }
     }
 
-    /**
-     * {@inheritdoc}
-     */
     public function removeReadStream($stream)
     {
         $key = (int) $stream;
@@ -70,9 +109,6 @@ public function removeReadStream($stream)
         );
     }
 
-    /**
-     * {@inheritdoc}
-     */
     public function removeWriteStream($stream)
     {
         $key = (int) $stream;
@@ -83,101 +119,72 @@ public function removeWriteStream($stream)
         );
     }
 
-    /**
-     * {@inheritdoc}
-     */
-    public function removeStream($stream)
+    public function addTimer($interval, $callback)
     {
-        $this->removeReadStream($stream);
-        $this->removeWriteStream($stream);
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function addTimer($interval, callable $callback)
-    {
-        $timer = new Timer($this, $interval, $callback, false);
+        $timer = new Timer($interval, $callback, false);
 
         $this->timers->add($timer);
 
         return $timer;
     }
 
-    /**
-     * {@inheritdoc}
-     */
-    public function addPeriodicTimer($interval, callable $callback)
+    public function addPeriodicTimer($interval, $callback)
     {
-        $timer = new Timer($this, $interval, $callback, true);
+        $timer = new Timer($interval, $callback, true);
 
         $this->timers->add($timer);
 
         return $timer;
     }
 
-    /**
-     * {@inheritdoc}
-     */
     public function cancelTimer(TimerInterface $timer)
     {
         $this->timers->cancel($timer);
     }
 
-    /**
-     * {@inheritdoc}
-     */
-    public function isTimerActive(TimerInterface $timer)
+    public function futureTick($listener)
     {
-        return $this->timers->contains($timer);
+        $this->futureTickQueue->add($listener);
     }
 
-    /**
-     * {@inheritdoc}
-     */
-    public function nextTick(callable $listener)
+    public function addSignal($signal, $listener)
     {
-        $this->nextTickQueue->add($listener);
-    }
+        if ($this->pcntl === false) {
+            throw new \BadMethodCallException('Event loop feature "signals" isn\'t supported by the "StreamSelectLoop"');
+        }
 
-    /**
-     * {@inheritdoc}
-     */
-    public function futureTick(callable $listener)
-    {
-        $this->futureTickQueue->add($listener);
+        $first = $this->signals->count($signal) === 0;
+        $this->signals->add($signal, $listener);
+
+        if ($first) {
+            \pcntl_signal($signal, [$this->signals, 'call']);
+        }
     }
 
-    /**
-     * {@inheritdoc}
-     */
-    public function tick()
+    public function removeSignal($signal, $listener)
     {
-        $this->nextTickQueue->tick();
-
-        $this->futureTickQueue->tick();
+        if (!$this->signals->count($signal)) {
+            return;
+        }
 
-        $this->timers->tick();
+        $this->signals->remove($signal, $listener);
 
-        $this->waitForStreamActivity(0);
+        if ($this->signals->count($signal) === 0) {
+            \pcntl_signal($signal, \SIG_DFL);
+        }
     }
 
-    /**
-     * {@inheritdoc}
-     */
     public function run()
     {
         $this->running = true;
 
         while ($this->running) {
-            $this->nextTickQueue->tick();
-
             $this->futureTickQueue->tick();
 
             $this->timers->tick();
 
-            // Next-tick or future-tick queues have pending callbacks ...
-            if (!$this->running || !$this->nextTickQueue->isEmpty() || !$this->futureTickQueue->isEmpty()) {
+            // Future-tick queue has pending callbacks ...
+            if (!$this->running || !$this->futureTickQueue->isEmpty()) {
                 $timeout = 0;
 
             // There is a pending timer, only block until it is due ...
@@ -186,11 +193,15 @@ public function run()
                 if ($timeout < 0) {
                     $timeout = 0;
                 } else {
+                    // Convert float seconds to int microseconds.
+                    // Ensure we do not exceed maximum integer size, which may
+                    // cause the loop to tick once every ~35min on 32bit systems.
                     $timeout *= self::MICROSECONDS_PER_SECOND;
+                    $timeout = $timeout > \PHP_INT_MAX ? \PHP_INT_MAX : (int)$timeout;
                 }
 
-            // The only possible event is stream activity, so wait forever ...
-            } elseif ($this->readStreams || $this->writeStreams) {
+            // The only possible event is stream or signal activity, so wait forever ...
+            } elseif ($this->readStreams || $this->writeStreams || !$this->signals->isEmpty()) {
                 $timeout = null;
 
             // There's nothing left to do ...
@@ -202,9 +213,6 @@ public function run()
         }
     }
 
-    /**
-     * {@inheritdoc}
-     */
     public function stop()
     {
         $this->running = false;
@@ -212,6 +220,8 @@ public function stop()
 
     /**
      * Wait/check for stream activity, or until the next timer is due.
+     *
+     * @param integer|null $timeout Activity timeout in microseconds, or null to wait forever.
      */
     private function waitForStreamActivity($timeout)
     {
@@ -219,6 +229,9 @@ private function waitForStreamActivity($timeout)
         $write = $this->writeStreams;
 
         $available = $this->streamSelect($read, $write, $timeout);
+        if ($this->pcntlPoll) {
+            \pcntl_signal_dispatch();
+        }
         if (false === $available) {
             // if a system call has been interrupted,
             // we cannot rely on it's outcome
@@ -229,7 +242,7 @@ private function waitForStreamActivity($timeout)
             $key = (int) $stream;
 
             if (isset($this->readListeners[$key])) {
-                call_user_func($this->readListeners[$key], $stream, $this);
+                \call_user_func($this->readListeners[$key], $stream);
             }
         }
 
@@ -237,7 +250,7 @@ private function waitForStreamActivity($timeout)
             $key = (int) $stream;
 
             if (isset($this->writeListeners[$key])) {
-                call_user_func($this->writeListeners[$key], $stream, $this);
+                \call_user_func($this->writeListeners[$key], $stream);
             }
         }
     }
@@ -246,23 +259,67 @@ private function waitForStreamActivity($timeout)
      * Emulate a stream_select() implementation that does not break when passed
      * empty stream arrays.
      *
-     * @param array        &$read   An array of read streams to select upon.
-     * @param array        &$write  An array of write streams to select upon.
-     * @param integer|null $timeout Activity timeout in microseconds, or null to wait forever.
+     * @param array    $read    An array of read streams to select upon.
+     * @param array    $write   An array of write streams to select upon.
+     * @param int|null $timeout Activity timeout in microseconds, or null to wait forever.
      *
-     * @return integer|false The total number of streams that are ready for read/write.
-     * Can return false if stream_select() is interrupted by a signal.
+     * @return int|false The total number of streams that are ready for read/write.
+     *     Can return false if stream_select() is interrupted by a signal.
      */
-    protected function streamSelect(array &$read, array &$write, $timeout)
+    private function streamSelect(array &$read, array &$write, $timeout)
     {
         if ($read || $write) {
+            // We do not usually use or expose the `exceptfds` parameter passed to the underlying `select`.
+            // However, Windows does not report failed connection attempts in `writefds` passed to `select` like most other platforms.
+            // Instead, it uses `writefds` only for successful connection attempts and `exceptfds` for failed connection attempts.
+            // We work around this by adding all sockets that look like a pending connection attempt to `exceptfds` automatically on Windows and merge it back later.
+            // This ensures the public API matches other loop implementations across all platforms (see also test suite or rather test matrix).
+            // Lacking better APIs, every write-only socket that has not yet read any data is assumed to be in a pending connection attempt state.
+            // @link https://docs.microsoft.com/de-de/windows/win32/api/winsock2/nf-winsock2-select
             $except = null;
+            if (\DIRECTORY_SEPARATOR === '\\') {
+                $except = [];
+                foreach ($write as $key => $socket) {
+                    if (!isset($read[$key]) && @\ftell($socket) === 0) {
+                        $except[$key] = $socket;
+                    }
+                }
+            }
 
-            // suppress warnings that occur, when stream_select is interrupted by a signal
-            return @stream_select($read, $write, $except, $timeout === null ? null : 0, $timeout);
+            /** @var ?callable $previous */
+            $previous = \set_error_handler(function ($errno, $errstr) use (&$previous) {
+                // suppress warnings that occur when `stream_select()` is interrupted by a signal
+                // PHP defines `EINTR` through `ext-sockets` or `ext-pcntl`, otherwise use common default (Linux & Mac)
+                $eintr = \defined('SOCKET_EINTR') ? \SOCKET_EINTR : (\defined('PCNTL_EINTR') ? \PCNTL_EINTR : 4);
+                if ($errno === \E_WARNING && \strpos($errstr, '[' . $eintr .']: ') !== false) {
+                    return;
+                }
+
+                // forward any other error to registered error handler or print warning
+                return ($previous !== null) ? \call_user_func_array($previous, \func_get_args()) : false;
+            });
+
+            try {
+                $ret = \stream_select($read, $write, $except, $timeout === null ? null : 0, $timeout);
+                \restore_error_handler();
+            } catch (\Throwable $e) {
+                \restore_error_handler();
+                throw $e;
+            }
+
+            if ($except) {
+                $write = \array_merge($write, $except);
+            }
+            return $ret;
         }
 
-        $timeout && usleep($timeout);
+        if ($timeout > 0) {
+            \usleep($timeout);
+        } elseif ($timeout === null) {
+            // wait forever (we only reach this if we're only awaiting signals)
+            // this may be interrupted and return earlier when a signal is received
+            \sleep(PHP_INT_MAX);
+        }
 
         return 0;
     }
diff --git a/src/Tick/FutureTickQueue.php b/src/Tick/FutureTickQueue.php
index eeffd363..efabcbc5 100644
--- a/src/Tick/FutureTickQueue.php
+++ b/src/Tick/FutureTickQueue.php
@@ -2,20 +2,22 @@
 
 namespace React\EventLoop\Tick;
 
-use React\EventLoop\LoopInterface;
 use SplQueue;
 
-class FutureTickQueue
+/**
+ * A tick queue implementation that can hold multiple callback functions
+ *
+ * This class should only be used internally, see LoopInterface instead.
+ *
+ * @see LoopInterface
+ * @internal
+ */
+final class FutureTickQueue
 {
-    private $eventLoop;
     private $queue;
 
-    /**
-     * @param LoopInterface $eventLoop The event loop passed as the first parameter to callbacks.
-     */
-    public function __construct(LoopInterface $eventLoop)
+    public function __construct()
     {
-        $this->eventLoop = $eventLoop;
         $this->queue = new SplQueue();
     }
 
@@ -26,7 +28,7 @@ public function __construct(LoopInterface $eventLoop)
      *
      * @param callable $listener The callback to invoke.
      */
-    public function add(callable $listener)
+    public function add($listener)
     {
         $this->queue->enqueue($listener);
     }
@@ -40,9 +42,8 @@ public function tick()
         $count = $this->queue->count();
 
         while ($count--) {
-            call_user_func(
-                $this->queue->dequeue(),
-                $this->eventLoop
+            \call_user_func(
+                $this->queue->dequeue()
             );
         }
     }
diff --git a/src/Tick/NextTickQueue.php b/src/Tick/NextTickQueue.php
deleted file mode 100644
index 5b8e1de8..00000000
--- a/src/Tick/NextTickQueue.php
+++ /dev/null
@@ -1,57 +0,0 @@
-<?php
-
-namespace React\EventLoop\Tick;
-
-use React\EventLoop\LoopInterface;
-use SplQueue;
-
-class NextTickQueue
-{
-    private $eventLoop;
-    private $queue;
-
-    /**
-     * @param LoopInterface $eventLoop The event loop passed as the first parameter to callbacks.
-     */
-    public function __construct(LoopInterface $eventLoop)
-    {
-        $this->eventLoop = $eventLoop;
-        $this->queue = new SplQueue();
-    }
-
-    /**
-     * Add a callback to be invoked on the next tick of the event loop.
-     *
-     * Callbacks are guaranteed to be executed in the order they are enqueued,
-     * before any timer or stream events.
-     *
-     * @param callable $listener The callback to invoke.
-     */
-    public function add(callable $listener)
-    {
-        $this->queue->enqueue($listener);
-    }
-
-    /**
-     * Flush the callback queue.
-     */
-    public function tick()
-    {
-        while (!$this->queue->isEmpty()) {
-            call_user_func(
-                $this->queue->dequeue(),
-                $this->eventLoop
-            );
-        }
-    }
-
-    /**
-     * Check if the next tick queue is empty.
-     *
-     * @return boolean
-     */
-    public function isEmpty()
-    {
-        return $this->queue->isEmpty();
-    }
-}
diff --git a/src/Timer/Timer.php b/src/Timer/Timer.php
index f670ab3c..da3602a3 100644
--- a/src/Timer/Timer.php
+++ b/src/Timer/Timer.php
@@ -2,101 +2,54 @@
 
 namespace React\EventLoop\Timer;
 
-use React\EventLoop\LoopInterface;
-
-class Timer implements TimerInterface
+use React\EventLoop\TimerInterface;
+
+/**
+ * The actual connection implementation for TimerInterface
+ *
+ * This class should only be used internally, see TimerInterface instead.
+ *
+ * @see TimerInterface
+ * @internal
+ */
+final class Timer implements TimerInterface
 {
     const MIN_INTERVAL = 0.000001;
 
-    protected $loop;
-    protected $interval;
-    protected $callback;
-    protected $periodic;
-    protected $data;
+    private $interval;
+    private $callback;
+    private $periodic;
 
     /**
      * Constructor initializes the fields of the Timer
      *
-     * @param LoopInterface $loop     The loop with which this timer is associated
      * @param float         $interval The interval after which this timer will execute, in seconds
      * @param callable      $callback The callback that will be executed when this timer elapses
      * @param bool          $periodic Whether the time is periodic
-     * @param mixed         $data     Arbitrary data associated with timer
      */
-    public function __construct(LoopInterface $loop, $interval, callable $callback, $periodic = false, $data = null)
+    public function __construct($interval, $callback, $periodic = false)
     {
         if ($interval < self::MIN_INTERVAL) {
             $interval = self::MIN_INTERVAL;
         }
 
-        $this->loop = $loop;
         $this->interval = (float) $interval;
         $this->callback = $callback;
         $this->periodic = (bool) $periodic;
-        $this->data = null;
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function getLoop()
-    {
-        return $this->loop;
     }
 
-    /**
-     * {@inheritdoc}
-     */
     public function getInterval()
     {
         return $this->interval;
     }
 
-    /**
-     * {@inheritdoc}
-     */
     public function getCallback()
     {
         return $this->callback;
     }
 
-    /**
-     * {@inheritdoc}
-     */
-    public function setData($data)
-    {
-        $this->data = $data;
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function getData()
-    {
-        return $this->data;
-    }
-
-    /**
-     * {@inheritdoc}
-     */
     public function isPeriodic()
     {
         return $this->periodic;
     }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function isActive()
-    {
-        return $this->loop->isTimerActive($this);
-    }
-
-    /**
-     * {@inheritdoc}
-     */
-    public function cancel()
-    {
-        $this->loop->cancelTimer($this);
-    }
 }
diff --git a/src/Timer/TimerInterface.php b/src/Timer/TimerInterface.php
deleted file mode 100644
index d066f369..00000000
--- a/src/Timer/TimerInterface.php
+++ /dev/null
@@ -1,62 +0,0 @@
-<?php
-
-namespace React\EventLoop\Timer;
-
-use React\EventLoop\LoopInterface;
-
-interface TimerInterface
-{
-    /**
-     * Get the loop with which this timer is associated
-     *
-     * @return LoopInterface
-     */
-    public function getLoop();
-
-    /**
-     * Get the interval after which this timer will execute, in seconds
-     *
-     * @return float
-     */
-    public function getInterval();
-
-    /**
-     * Get the callback that will be executed when this timer elapses
-     *
-     * @return callable
-     */
-    public function getCallback();
-
-    /**
-     * Set arbitrary data associated with timer
-     *
-     * @param mixed $data
-     */
-    public function setData($data);
-
-    /**
-     * Get arbitrary data associated with timer
-     *
-     * @return mixed
-     */
-    public function getData();
-
-    /**
-     * Determine whether the time is periodic
-     *
-     * @return bool
-     */
-    public function isPeriodic();
-
-    /**
-     * Determine whether the time is active
-     *
-     * @return bool
-     */
-    public function isActive();
-
-    /**
-     * Cancel this timer
-     */
-    public function cancel();
-}
diff --git a/src/Timer/Timers.php b/src/Timer/Timers.php
index bebe5520..c9ae5ed8 100644
--- a/src/Timer/Timers.php
+++ b/src/Timer/Timers.php
@@ -2,24 +2,33 @@
 
 namespace React\EventLoop\Timer;
 
-use SplObjectStorage;
-use SplPriorityQueue;
-
-class Timers
+use React\EventLoop\TimerInterface;
+
+/**
+ * A scheduler implementation that can hold multiple timer instances
+ *
+ * This class should only be used internally, see TimerInterface instead.
+ *
+ * @see TimerInterface
+ * @internal
+ */
+final class Timers
 {
     private $time;
-    private $timers;
-    private $scheduler;
+    private $timers = [];
+    private $schedule = [];
+    private $sorted = true;
+    private $useHighResolution;
 
     public function __construct()
     {
-        $this->timers = new SplObjectStorage();
-        $this->scheduler = new SplPriorityQueue();
+        // prefer high-resolution timer, available as of PHP 7.3+
+        $this->useHighResolution = \function_exists('hrtime');
     }
 
     public function updateTime()
     {
-        return $this->time = microtime(true);
+        return $this->time = $this->useHighResolution ? \hrtime(true) * 1e-9 : \microtime(true);
     }
 
     public function getTime()
@@ -29,71 +38,75 @@ public function getTime()
 
     public function add(TimerInterface $timer)
     {
-        $interval = $timer->getInterval();
-        $scheduledAt = $interval + microtime(true);
-
-        $this->timers->attach($timer, $scheduledAt);
-        $this->scheduler->insert($timer, -$scheduledAt);
+        $id = \PHP_VERSION_ID < 70200 ? \spl_object_hash($timer) : \spl_object_id($timer);
+        $this->timers[$id] = $timer;
+        $this->schedule[$id] = $timer->getInterval() + $this->updateTime();
+        $this->sorted = false;
     }
 
     public function contains(TimerInterface $timer)
     {
-        return $this->timers->contains($timer);
+        $id = \PHP_VERSION_ID < 70200 ? \spl_object_hash($timer) : \spl_object_id($timer);
+        return isset($this->timers[$id]);
     }
 
     public function cancel(TimerInterface $timer)
     {
-        $this->timers->detach($timer);
+        $id = \PHP_VERSION_ID < 70200 ? \spl_object_hash($timer) : \spl_object_id($timer);
+        unset($this->timers[$id], $this->schedule[$id]);
     }
 
     public function getFirst()
     {
-        while ($this->scheduler->count()) {
-            $timer = $this->scheduler->top();
-
-            if ($this->timers->contains($timer)) {
-                return $this->timers[$timer];
-            }
-
-            $this->scheduler->extract();
+        // ensure timers are sorted to simply accessing next (first) one
+        if (!$this->sorted) {
+            $this->sorted = true;
+            \asort($this->schedule);
         }
 
-        return null;
+        return \reset($this->schedule);
     }
 
     public function isEmpty()
     {
-        return count($this->timers) === 0;
+        return \count($this->timers) === 0;
     }
 
     public function tick()
     {
-        $time = $this->updateTime();
-        $timers = $this->timers;
-        $scheduler = $this->scheduler;
+        // hot path: skip timers if nothing is scheduled
+        if (!$this->schedule) {
+            return;
+        }
 
-        while (!$scheduler->isEmpty()) {
-            $timer = $scheduler->top();
+        // ensure timers are sorted so we can execute in order
+        if (!$this->sorted) {
+            $this->sorted = true;
+            \asort($this->schedule);
+        }
 
-            if (!isset($timers[$timer])) {
-                $scheduler->extract();
-                $timers->detach($timer);
+        $time = $this->updateTime();
 
-                continue;
+        foreach ($this->schedule as $id => $scheduled) {
+            // schedule is ordered, so loop until first timer that is not scheduled for execution now
+            if ($scheduled >= $time) {
+                break;
             }
 
-            if ($timers[$timer] >= $time) {
-                break;
+            // skip any timers that are removed while we process the current schedule
+            if (!isset($this->schedule[$id]) || $this->schedule[$id] !== $scheduled) {
+                continue;
             }
 
-            $scheduler->extract();
-            call_user_func($timer->getCallback(), $timer);
+            $timer = $this->timers[$id];
+            \call_user_func($timer->getCallback(), $timer);
 
-            if ($timer->isPeriodic() && isset($timers[$timer])) {
-                $timers[$timer] = $scheduledAt = $timer->getInterval() + $time;
-                $scheduler->insert($timer, -$scheduledAt);
+            // re-schedule if this is a periodic timer and it has not been cancelled explicitly already
+            if ($timer->isPeriodic() && isset($this->timers[$id])) {
+                $this->schedule[$id] = $timer->getInterval() + $time;
+                $this->sorted = false;
             } else {
-                $timers->detach($timer);
+                unset($this->timers[$id], $this->schedule[$id]);
             }
         }
     }
diff --git a/src/TimerInterface.php b/src/TimerInterface.php
new file mode 100644
index 00000000..cdcf7732
--- /dev/null
+++ b/src/TimerInterface.php
@@ -0,0 +1,27 @@
+<?php
+
+namespace React\EventLoop;
+
+interface TimerInterface
+{
+    /**
+     * Get the interval after which this timer will execute, in seconds
+     *
+     * @return float
+     */
+    public function getInterval();
+
+    /**
+     * Get the callback that will be executed when this timer elapses
+     *
+     * @return callable
+     */
+    public function getCallback();
+
+    /**
+     * Determine whether the time is periodic
+     *
+     * @return bool
+     */
+    public function isPeriodic();
+}
diff --git a/tests/AbstractLoopTest.php b/tests/AbstractLoopTest.php
index 50b3e432..e89a8371 100644
--- a/tests/AbstractLoopTest.php
+++ b/tests/AbstractLoopTest.php
@@ -2,6 +2,9 @@
 
 namespace React\Tests\EventLoop;
 
+use React\EventLoop\StreamSelectLoop;
+use React\EventLoop\ExtUvLoop;
+
 abstract class AbstractLoopTest extends TestCase
 {
     /**
@@ -9,157 +12,405 @@ abstract class AbstractLoopTest extends TestCase
      */
     protected $loop;
 
+    /** @var float */
     private $tickTimeout;
 
-    public function setUp()
+    /** @var ?string */
+    private $received;
+
+    const PHP_DEFAULT_CHUNK_SIZE = 8192;
+
+    /**
+     * @before
+     */
+    public function setUpLoop()
     {
-        // HHVM is a bit slow, so give it more time
-        $this->tickTimeout = defined('HHVM_VERSION') ? 0.02 : 0.005;
+        // It's a timeout, don't set it too low. Travis and other CI systems are slow.
+        $this->tickTimeout = 0.02;
         $this->loop = $this->createLoop();
     }
 
     abstract public function createLoop();
 
-    public function createStream()
+    public function createSocketPair()
+    {
+        $domain = (DIRECTORY_SEPARATOR === '\\') ? STREAM_PF_INET : STREAM_PF_UNIX;
+        $sockets = stream_socket_pair($domain, STREAM_SOCK_STREAM, STREAM_IPPROTO_IP);
+
+        foreach ($sockets as $socket) {
+            if (function_exists('stream_set_read_buffer')) {
+                stream_set_read_buffer($socket, 0);
+            }
+        }
+
+        return $sockets;
+    }
+
+    public function testAddReadStreamTriggersWhenSocketReceivesData()
+    {
+        list ($input, $output) = $this->createSocketPair();
+
+        $timeout = $this->loop->addTimer(0.1, function () use ($input) {
+            $this->loop->removeReadStream($input);
+        });
+
+        $called = 0;
+        $this->loop->addReadStream($input, function () use (&$called, $input, $timeout) {
+            ++$called;
+            $this->loop->removeReadStream($input);
+            $this->loop->cancelTimer($timeout);
+        });
+
+        fwrite($output, "foo\n");
+
+        $this->loop->run();
+
+        $this->assertEquals(1, $called);
+    }
+
+    public function testAddReadStreamTriggersWhenSocketCloses()
+    {
+        list ($input, $output) = $this->createSocketPair();
+
+        $timeout = $this->loop->addTimer(0.1, function () use ($input) {
+            $this->loop->removeReadStream($input);
+        });
+
+        $called = 0;
+        $this->loop->addReadStream($input, function () use (&$called, $input, $timeout) {
+            ++$called;
+            $this->loop->removeReadStream($input);
+            $this->loop->cancelTimer($timeout);
+        });
+
+        fclose($output);
+
+        $this->loop->run();
+
+        $this->assertEquals(1, $called);
+    }
+
+    public function testAddWriteStreamTriggersWhenSocketConnectionSucceeds()
     {
-        return fopen('php://temp', 'r+');
+        $server = stream_socket_server('127.0.0.1:0');
+
+        $errno = $errstr = null;
+        $connecting = stream_socket_client(stream_socket_get_name($server, false), $errno, $errstr, 0, STREAM_CLIENT_CONNECT | STREAM_CLIENT_ASYNC_CONNECT);
+
+        $timeout = $this->loop->addTimer(0.1, function () use ($connecting) {
+            $this->loop->removeWriteStream($connecting);
+        });
+
+        $called = 0;
+        $this->loop->addWriteStream($connecting, function () use (&$called, $connecting, $timeout) {
+            ++$called;
+            $this->loop->removeWriteStream($connecting);
+            $this->loop->cancelTimer($timeout);
+        });
+
+        $this->loop->run();
+
+        $this->assertEquals(1, $called);
     }
 
-    public function writeToStream($stream, $content)
+    public function testAddWriteStreamTriggersWhenSocketConnectionRefused()
     {
-        fwrite($stream, $content);
-        rewind($stream);
+        // first verify the operating system actually refuses the connection and no firewall is in place
+        // use higher timeout because Windows retires multiple times and has a noticeable delay
+        // @link https://stackoverflow.com/questions/19440364/why-do-failed-attempts-of-socket-connect-take-1-sec-on-windows
+        $errno = $errstr = null;
+        if (@stream_socket_client('127.0.0.1:1', $errno, $errstr, 10.0) !== false || (defined('SOCKET_ECONNREFUSED') && $errno !== SOCKET_ECONNREFUSED)) {
+            $this->markTestSkipped('Expected host to refuse connection, but got error ' . $errno . ': ' . $errstr);
+        }
+
+        $connecting = stream_socket_client('127.0.0.1:1', $errno, $errstr, 0, STREAM_CLIENT_CONNECT | STREAM_CLIENT_ASYNC_CONNECT);
+
+        $timeout = $this->loop->addTimer(10.0, function () use ($connecting) {
+            $this->loop->removeWriteStream($connecting);
+        });
+
+        $called = 0;
+        $this->loop->addWriteStream($connecting, function () use (&$called, $connecting, $timeout) {
+            ++$called;
+            $this->loop->removeWriteStream($connecting);
+            $this->loop->cancelTimer($timeout);
+        });
+
+        $this->loop->run();
+
+        $this->assertEquals(1, $called);
     }
 
     public function testAddReadStream()
     {
-        $input = $this->createStream();
+        if ($this->loop instanceof ExtUvLoop && DIRECTORY_SEPARATOR === '\\') {
+            $this->markTestIncomplete('Ticking ExtUvLoop not supported on Windows');
+        }
+
+        list ($input, $output) = $this->createSocketPair();
+
+        $this->loop->addReadStream($input, $this->expectCallableExactly(2));
+
+        fwrite($output, "foo\n");
+        $this->tickLoop($this->loop);
+
+        fwrite($output, "bar\n");
+        $this->tickLoop($this->loop);
+    }
+
+    public function testAddReadStreamIgnoresSecondCallable()
+    {
+        if ($this->loop instanceof ExtUvLoop && DIRECTORY_SEPARATOR === '\\') {
+            $this->markTestIncomplete('Ticking ExtUvLoop not supported on Windows');
+        }
+
+        list ($input, $output) = $this->createSocketPair();
 
         $this->loop->addReadStream($input, $this->expectCallableExactly(2));
+        $this->loop->addReadStream($input, $this->expectCallableNever());
+
+        fwrite($output, "foo\n");
+        $this->tickLoop($this->loop);
+
+        fwrite($output, "bar\n");
+        $this->tickLoop($this->loop);
+    }
+
+    public function testAddReadStreamReceivesDataFromStreamReference()
+    {
+        $this->received = '';
+        $this->subAddReadStreamReceivesDataFromStreamReference();
+        $this->assertEquals('', $this->received);
 
-        $this->writeToStream($input, "foo\n");
-        $this->loop->tick();
+        $this->assertRunFasterThan($this->tickTimeout * 2);
+        $this->assertEquals('[hello]X', $this->received);
+    }
 
-        $this->writeToStream($input, "bar\n");
-        $this->loop->tick();
+    /**
+     * Helper for above test. This happens in another helper method to verify
+     * the loop keeps track of assigned stream resources (refcount).
+     */
+    private function subAddReadStreamReceivesDataFromStreamReference()
+    {
+        list ($input, $output) = $this->createSocketPair();
+
+        fwrite($input, 'hello');
+        fclose($input);
+
+        $this->loop->addReadStream($output, function ($output) {
+            $chunk = fread($output, 1024);
+            if ($chunk === '') {
+                $this->received .= 'X';
+                $this->loop->removeReadStream($output);
+                fclose($output);
+            } else {
+                $this->received .= '[' . $chunk . ']';
+            }
+        });
     }
 
     public function testAddWriteStream()
     {
-        $input = $this->createStream();
+        if ($this->loop instanceof ExtUvLoop && DIRECTORY_SEPARATOR === '\\') {
+            $this->markTestIncomplete('Ticking ExtUvLoop not supported on Windows');
+        }
+
+        list ($input) = $this->createSocketPair();
 
         $this->loop->addWriteStream($input, $this->expectCallableExactly(2));
-        $this->loop->tick();
-        $this->loop->tick();
+        $this->tickLoop($this->loop);
+        $this->tickLoop($this->loop);
+    }
+
+    public function testAddWriteStreamIgnoresSecondCallable()
+    {
+        if ($this->loop instanceof ExtUvLoop && DIRECTORY_SEPARATOR === '\\') {
+            $this->markTestIncomplete('Ticking ExtUvLoop not supported on Windows');
+        }
+
+        list ($input) = $this->createSocketPair();
+
+        $this->loop->addWriteStream($input, $this->expectCallableExactly(2));
+        $this->loop->addWriteStream($input, $this->expectCallableNever());
+        $this->tickLoop($this->loop);
+        $this->tickLoop($this->loop);
     }
 
     public function testRemoveReadStreamInstantly()
     {
-        $input = $this->createStream();
+        if ($this->loop instanceof ExtUvLoop && DIRECTORY_SEPARATOR === '\\') {
+            $this->markTestIncomplete('Ticking ExtUvLoop not supported on Windows');
+        }
+
+        list ($input, $output) = $this->createSocketPair();
 
         $this->loop->addReadStream($input, $this->expectCallableNever());
         $this->loop->removeReadStream($input);
 
-        $this->writeToStream($input, "bar\n");
-        $this->loop->tick();
+        fwrite($output, "bar\n");
+        $this->tickLoop($this->loop);
     }
 
     public function testRemoveReadStreamAfterReading()
     {
-        $input = $this->createStream();
+        if ($this->loop instanceof ExtUvLoop && DIRECTORY_SEPARATOR === '\\') {
+            $this->markTestIncomplete('Ticking ExtUvLoop not supported on Windows');
+        }
+
+        list ($input, $output) = $this->createSocketPair();
 
         $this->loop->addReadStream($input, $this->expectCallableOnce());
 
-        $this->writeToStream($input, "foo\n");
-        $this->loop->tick();
+        fwrite($output, "foo\n");
+        $this->tickLoop($this->loop);
 
         $this->loop->removeReadStream($input);
 
-        $this->writeToStream($input, "bar\n");
-        $this->loop->tick();
+        fwrite($output, "bar\n");
+        $this->tickLoop($this->loop);
     }
 
     public function testRemoveWriteStreamInstantly()
     {
-        $input = $this->createStream();
+        if ($this->loop instanceof ExtUvLoop && DIRECTORY_SEPARATOR === '\\') {
+            $this->markTestIncomplete('Ticking ExtUvLoop not supported on Windows');
+        }
+
+        list ($input) = $this->createSocketPair();
 
         $this->loop->addWriteStream($input, $this->expectCallableNever());
         $this->loop->removeWriteStream($input);
-        $this->loop->tick();
+        $this->tickLoop($this->loop);
     }
 
     public function testRemoveWriteStreamAfterWriting()
     {
-        $input = $this->createStream();
+        if ($this->loop instanceof ExtUvLoop && DIRECTORY_SEPARATOR === '\\') {
+            $this->markTestIncomplete('Ticking ExtUvLoop not supported on Windows');
+        }
+
+        list ($input) = $this->createSocketPair();
 
         $this->loop->addWriteStream($input, $this->expectCallableOnce());
-        $this->loop->tick();
+        $this->tickLoop($this->loop);
 
         $this->loop->removeWriteStream($input);
-        $this->loop->tick();
+        $this->tickLoop($this->loop);
     }
 
-    public function testRemoveStreamInstantly()
+    public function testRemoveStreamForReadOnly()
     {
-        $input = $this->createStream();
+        if ($this->loop instanceof ExtUvLoop && DIRECTORY_SEPARATOR === '\\') {
+            $this->markTestIncomplete('Ticking ExtUvLoop not supported on Windows');
+        }
+
+        list ($input, $output) = $this->createSocketPair();
 
         $this->loop->addReadStream($input, $this->expectCallableNever());
-        $this->loop->addWriteStream($input, $this->expectCallableNever());
-        $this->loop->removeStream($input);
+        $this->loop->addWriteStream($output, $this->expectCallableOnce());
+        $this->loop->removeReadStream($input);
 
-        $this->writeToStream($input, "bar\n");
-        $this->loop->tick();
+        fwrite($output, "foo\n");
+        $this->tickLoop($this->loop);
     }
 
-    public function testRemoveStreamForReadOnly()
+    public function testRemoveStreamForWriteOnly()
     {
-        $input = $this->createStream();
+        if ($this->loop instanceof ExtUvLoop && DIRECTORY_SEPARATOR === '\\') {
+            $this->markTestIncomplete('Ticking ExtUvLoop not supported on Windows');
+        }
 
-        $this->loop->addReadStream($input, $this->expectCallableNever());
-        $this->loop->addWriteStream($input, $this->expectCallableOnce());
-        $this->loop->removeReadStream($input);
+        list ($input, $output) = $this->createSocketPair();
+
+        fwrite($output, "foo\n");
 
-        $this->writeToStream($input, "foo\n");
-        $this->loop->tick();
+        $this->loop->addReadStream($input, $this->expectCallableOnce());
+        $this->loop->addWriteStream($output, $this->expectCallableNever());
+        $this->loop->removeWriteStream($output);
+
+        $this->tickLoop($this->loop);
     }
 
-    public function testRemoveStreamForWriteOnly()
+    public function testRemoveReadAndWriteStreamFromLoopOnceResourceClosesEndsLoop()
     {
-        $input = $this->createStream();
+        list($stream, $other) = $this->createSocketPair();
+        stream_set_blocking($stream, false);
+        stream_set_blocking($other, false);
 
-        $this->writeToStream($input, "foo\n");
+        // dummy writable handler
+        $this->loop->addWriteStream($stream, function () { });
 
-        $this->loop->addReadStream($input, $this->expectCallableOnce());
-        $this->loop->addWriteStream($input, $this->expectCallableNever());
-        $this->loop->removeWriteStream($input);
+        // remove stream when the stream is readable (closes)
+        $this->loop->addReadStream($stream, function ($stream) {
+            $this->loop->removeReadStream($stream);
+            $this->loop->removeWriteStream($stream);
+            fclose($stream);
+        });
 
-        $this->loop->tick();
+        // close other side
+        fclose($other);
+
+        $this->assertRunFasterThan($this->tickTimeout);
     }
 
-    public function testRemoveStream()
+    public function testRemoveReadAndWriteStreamFromLoopOnceResourceClosesOnEndOfFileEndsLoop()
     {
-        $input = $this->createStream();
+        list($stream, $other) = $this->createSocketPair();
+        stream_set_blocking($stream, false);
+        stream_set_blocking($other, false);
 
-        $this->loop->addReadStream($input, $this->expectCallableOnce());
-        $this->loop->addWriteStream($input, $this->expectCallableOnce());
+        // dummy writable handler
+        $this->loop->addWriteStream($stream, function () { });
+
+        // remove stream when the stream is readable (closes)
+        $this->loop->addReadStream($stream, function ($stream) {
+            $data = fread($stream, 1024);
+            if ($data !== '') {
+                return;
+            }
 
-        $this->writeToStream($input, "bar\n");
-        $this->loop->tick();
+            $this->loop->removeReadStream($stream);
+            $this->loop->removeWriteStream($stream);
+            fclose($stream);
+        });
+
+        // send data and close stream
+        fwrite($other, str_repeat('.', static::PHP_DEFAULT_CHUNK_SIZE));
+        $this->loop->addTimer(0.01, function () use ($other) {
+            fclose($other);
+        });
+
+        $this->assertRunFasterThan(0.1);
+    }
 
-        $this->loop->removeStream($input);
+    public function testRemoveReadAndWriteStreamFromLoopWithClosingResourceEndsLoop()
+    {
+        // get only one part of the pair to ensure the other side will close immediately
+        list($stream) = $this->createSocketPair();
+        stream_set_blocking($stream, false);
+
+        // dummy writable handler
+        $this->loop->addWriteStream($stream, function () { });
+
+        // remove stream when the stream is readable (closes)
+        $this->loop->addReadStream($stream, function ($stream) {
+            $this->loop->removeReadStream($stream);
+            $this->loop->removeWriteStream($stream);
+            fclose($stream);
+        });
 
-        $this->writeToStream($input, "bar\n");
-        $this->loop->tick();
+        $this->assertRunFasterThan($this->tickTimeout);
     }
 
     public function testRemoveInvalid()
     {
-        $stream = $this->createStream();
+        list ($stream) = $this->createSocketPair();
 
         // remove a valid stream from the event loop that was never added in the first place
         $this->loop->removeReadStream($stream);
         $this->loop->removeWriteStream($stream);
-        $this->loop->removeStream($stream);
+
+        $this->assertTrue(true);
     }
 
     /** @test */
@@ -171,14 +422,13 @@ public function emptyRunShouldSimplyReturn()
     /** @test */
     public function runShouldReturnWhenNoMoreFds()
     {
-        $input = $this->createStream();
+        list ($input, $output) = $this->createSocketPair();
 
-        $loop = $this->loop;
-        $this->loop->addReadStream($input, function ($stream) use ($loop) {
-            $loop->removeStream($stream);
+        $this->loop->addReadStream($input, function ($stream) {
+            $this->loop->removeReadStream($stream);
         });
 
-        $this->writeToStream($input, "foo\n");
+        fwrite($output, "foo\n");
 
         $this->assertRunFasterThan($this->tickTimeout * 2);
     }
@@ -186,14 +436,13 @@ public function runShouldReturnWhenNoMoreFds()
     /** @test */
     public function stopShouldStopRunningLoop()
     {
-        $input = $this->createStream();
+        list ($input, $output) = $this->createSocketPair();
 
-        $loop = $this->loop;
-        $this->loop->addReadStream($input, function ($stream) use ($loop) {
-            $loop->stop();
+        $this->loop->addReadStream($input, function ($stream) {
+            $this->loop->stop();
         });
 
-        $this->writeToStream($input, "foo\n");
+        fwrite($output, "foo\n");
 
         $this->assertRunFasterThan($this->tickTimeout * 2);
     }
@@ -207,7 +456,7 @@ function () {
             }
         );
 
-        $this->loop->nextTick(
+        $this->loop->futureTick(
             function () {
                 $this->loop->stop();
             }
@@ -219,145 +468,46 @@ function () {
     public function testIgnoreRemovedCallback()
     {
         // two independent streams, both should be readable right away
-        $stream1 = $this->createStream();
-        $stream2 = $this->createStream();
-
-        $loop = $this->loop;
-        $loop->addReadStream($stream1, function ($stream) use ($loop, $stream2) {
-            // stream1 is readable, remove stream2 as well => this will invalidate its callback
-            $loop->removeReadStream($stream);
-            $loop->removeReadStream($stream2);
-        });
-
-        // this callback would have to be called as well, but the first stream already removed us
-        $loop->addReadStream($stream2, $this->expectCallableNever());
-
-        $this->writeToStream($stream1, "foo\n");
-        $this->writeToStream($stream2, "foo\n");
+        list ($input1, $output1) = $this->createSocketPair();
+        list ($input2, $output2) = $this->createSocketPair();
 
-        $loop->run();
-    }
-
-    public function testNextTick()
-    {
         $called = false;
+        $this->loop->addReadStream($input1, function ($stream) use (&$called, $input2) {
+            // stream1 is readable, remove stream2 as well => this will invalidate its callback
+            $this->loop->removeReadStream($stream);
+            $this->loop->removeReadStream($input2);
 
-        $callback = function ($loop) use (&$called) {
-            $this->assertSame($this->loop, $loop);
             $called = true;
-        };
-
-        $this->loop->nextTick($callback);
-
-        $this->assertFalse($called);
-
-        $this->loop->tick();
-
-        $this->assertTrue($called);
-    }
-
-    public function testNextTickFiresBeforeIO()
-    {
-        $stream = $this->createStream();
-
-        $this->loop->addWriteStream(
-            $stream,
-            function () {
-                echo 'stream' . PHP_EOL;
-            }
-        );
-
-        $this->loop->nextTick(
-            function () {
-                echo 'next-tick' . PHP_EOL;
-            }
-        );
-
-        $this->expectOutputString('next-tick' . PHP_EOL . 'stream' . PHP_EOL);
-
-        $this->loop->tick();
-    }
-
-    public function testRecursiveNextTick()
-    {
-        $stream = $this->createStream();
-
-        $this->loop->addWriteStream(
-            $stream,
-            function () {
-                echo 'stream' . PHP_EOL;
-            }
-        );
-
-        $this->loop->nextTick(
-            function () {
-                $this->loop->nextTick(
-                    function () {
-                        echo 'next-tick' . PHP_EOL;
-                    }
-                );
-            }
-        );
-
-        $this->expectOutputString('next-tick' . PHP_EOL . 'stream' . PHP_EOL);
-
-        $this->loop->tick();
-    }
-
-    public function testRunWaitsForNextTickEvents()
-    {
-        $stream = $this->createStream();
+        });
 
-        $this->loop->addWriteStream(
-            $stream,
-            function () use ($stream) {
-                $this->loop->removeStream($stream);
-                $this->loop->nextTick(
-                    function () {
-                        echo 'next-tick' . PHP_EOL;
-                    }
-                );
+        // this callback would have to be called as well, but the first stream already removed us
+        $this->loop->addReadStream($input2, function () use (&$called) {
+            if ($called) {
+                $this->fail('Callback 2 must not be called after callback 1 was called');
             }
-        );
+        });
 
-        $this->expectOutputString('next-tick' . PHP_EOL);
+        fwrite($output1, "foo\n");
+        fwrite($output2, "foo\n");
 
         $this->loop->run();
-    }
-
-    public function testNextTickEventGeneratedByFutureTick()
-    {
-        $stream = $this->createStream();
-
-        $this->loop->futureTick(
-            function () {
-                $this->loop->nextTick(
-                    function () {
-                        echo 'next-tick' . PHP_EOL;
-                    }
-                );
-            }
-        );
 
-        $this->expectOutputString('next-tick' . PHP_EOL);
-
-        $this->loop->run();
+        $this->assertTrue($called);
     }
 
-    public function testNextTickEventGeneratedByTimer()
+    public function testFutureTickEventGeneratedByFutureTick()
     {
-        $this->loop->addTimer(
-            0.001,
+        $this->loop->futureTick(
             function () {
-                $this->loop->nextTick(
+                $this->loop->futureTick(
                     function () {
-                        echo 'next-tick' . PHP_EOL;
+                        echo 'future-tick' . PHP_EOL;
                     }
                 );
             }
         );
 
-        $this->expectOutputString('next-tick' . PHP_EOL);
+        $this->expectOutputString('future-tick' . PHP_EOL);
 
         $this->loop->run();
     }
@@ -366,8 +516,7 @@ public function testFutureTick()
     {
         $called = false;
 
-        $callback = function ($loop) use (&$called) {
-            $this->assertSame($this->loop, $loop);
+        $callback = function () use (&$called) {
             $called = true;
         };
 
@@ -375,14 +524,18 @@ public function testFutureTick()
 
         $this->assertFalse($called);
 
-        $this->loop->tick();
+        $this->tickLoop($this->loop);
 
         $this->assertTrue($called);
     }
 
     public function testFutureTickFiresBeforeIO()
     {
-        $stream = $this->createStream();
+        if ($this->loop instanceof ExtUvLoop && DIRECTORY_SEPARATOR === '\\') {
+            $this->markTestIncomplete('Ticking ExtUvLoop not supported on Windows');
+        }
+
+        list ($stream) = $this->createSocketPair();
 
         $this->loop->addWriteStream(
             $stream,
@@ -399,12 +552,15 @@ function () {
 
         $this->expectOutputString('future-tick' . PHP_EOL . 'stream' . PHP_EOL);
 
-        $this->loop->tick();
+        $this->tickLoop($this->loop);
     }
 
+    /**
+     * @depends testFutureTickFiresBeforeIO
+     */
     public function testRecursiveFutureTick()
     {
-        $stream = $this->createStream();
+        list ($stream) = $this->createSocketPair();
 
         $this->loop->addWriteStream(
             $stream,
@@ -432,12 +588,12 @@ function () {
 
     public function testRunWaitsForFutureTickEvents()
     {
-        $stream = $this->createStream();
+        list ($stream) = $this->createSocketPair();
 
         $this->loop->addWriteStream(
             $stream,
             function () use ($stream) {
-                $this->loop->removeStream($stream);
+                $this->loop->removeWriteStream($stream);
                 $this->loop->futureTick(
                     function () {
                         echo 'future-tick' . PHP_EOL;
@@ -451,11 +607,10 @@ function () {
         $this->loop->run();
     }
 
-    public function testFutureTickEventGeneratedByNextTick()
+    public function testFutureTickEventGeneratedByTimer()
     {
-        $stream = $this->createStream();
-
-        $this->loop->nextTick(
+        $this->loop->addTimer(
+            0.001,
             function () {
                 $this->loop->futureTick(
                     function () {
@@ -470,22 +625,140 @@ function () {
         $this->loop->run();
     }
 
-    public function testFutureTickEventGeneratedByTimer()
+    public function testRemoveSignalNotRegisteredIsNoOp()
     {
-        $this->loop->addTimer(
-            0.001,
-            function () {
-                $this->loop->futureTick(
-                    function () {
-                        echo 'future-tick' . PHP_EOL;
-                    }
-                );
-            }
-        );
+        $this->loop->removeSignal(2, function () { });
+        $this->assertTrue(true);
+    }
 
-        $this->expectOutputString('future-tick' . PHP_EOL);
+    /**
+     * @requires extension pcntl
+     * @requires function posix_kill()
+     * @requires function posix_getpid()
+     */
+    public function testSignal()
+    {
+        if ($this->loop instanceof StreamSelectLoop && !(\function_exists('pcntl_signal') && \function_exists('pcntl_signal_dispatch'))) {
+            $this->markTestSkipped('Signal handling with StreamSelectLoop requires pcntl_signal() and pcntl_signal_dispatch(), see also disable_functions');
+        }
+
+        $called = false;
+        $calledShouldNot = true;
+
+        $timer = $this->loop->addPeriodicTimer(1, function () {});
+
+        $this->loop->addSignal(SIGUSR2, $func2 = function () use (&$calledShouldNot) {
+            $calledShouldNot = false;
+        });
+
+        $this->loop->addSignal(SIGUSR1, $func1 = function () use (&$func1, &$func2, &$called, $timer) {
+            $called = true;
+            $this->loop->removeSignal(SIGUSR1, $func1);
+            $this->loop->removeSignal(SIGUSR2, $func2);
+            $this->loop->cancelTimer($timer);
+        });
+
+        $this->loop->futureTick(function () {
+            posix_kill(posix_getpid(), SIGUSR1);
+        });
+
+        $this->loop->run();
+
+        $this->assertTrue($called);
+        $this->assertTrue($calledShouldNot);
+    }
+
+    /**
+     * @requires extension pcntl
+     */
+    public function testSignalMultipleUsagesForTheSameListener()
+    {
+        if ($this->loop instanceof StreamSelectLoop && !(\function_exists('pcntl_signal') && \function_exists('pcntl_signal_dispatch'))) {
+            $this->markTestSkipped('Signal handling with StreamSelectLoop requires pcntl_signal() and pcntl_signal_dispatch(), see also disable_functions');
+        }
+
+        $funcCallCount = 0;
+        $func = function () use (&$funcCallCount) {
+            $funcCallCount++;
+        };
+        $this->loop->addTimer(1, function () {});
+
+        $this->loop->addSignal(SIGUSR1, $func);
+        $this->loop->addSignal(SIGUSR1, $func);
+
+        $this->loop->addTimer(0.4, function () {
+            posix_kill(posix_getpid(), SIGUSR1);
+        });
+        $this->loop->addTimer(0.9, function () use (&$func) {
+            $this->loop->removeSignal(SIGUSR1, $func);
+        });
+
+        $this->loop->run();
+
+        $this->assertSame(1, $funcCallCount);
+    }
+
+    /**
+     * @requires extension pcntl
+     */
+    public function testSignalsKeepTheLoopRunning()
+    {
+        if ($this->loop instanceof StreamSelectLoop && !(\function_exists('pcntl_signal') && \function_exists('pcntl_signal_dispatch'))) {
+            $this->markTestSkipped('Signal handling with StreamSelectLoop requires pcntl_signal() and pcntl_signal_dispatch(), see also disable_functions');
+        }
+
+        $function = function () {};
+        $this->loop->addSignal(SIGUSR1, $function);
+        $this->loop->addTimer(1.5, function () use ($function) {
+            $this->loop->removeSignal(SIGUSR1, $function);
+            $this->loop->stop();
+        });
+
+        $this->assertRunSlowerThan(1.4);
+    }
+
+    /**
+     * @requires extension pcntl
+     */
+    public function testSignalsKeepTheLoopRunningAndRemovingItStopsTheLoop()
+    {
+        if ($this->loop instanceof StreamSelectLoop && !(\function_exists('pcntl_signal') && \function_exists('pcntl_signal_dispatch'))) {
+            $this->markTestSkipped('Signal handling with StreamSelectLoop requires pcntl_signal() and pcntl_signal_dispatch(), see also disable_functions');
+        }
+
+        $function = function () {};
+        $this->loop->addSignal(SIGUSR1, $function);
+        $this->loop->addTimer(1.5, function () use ($function) {
+            $this->loop->removeSignal(SIGUSR1, $function);
+        });
+
+        $this->assertRunFasterThan(1.6);
+    }
+
+    public function testTimerIntervalCanBeFarInFuture()
+    {
+        // Maximum interval for ExtUvLoop implementation
+        $interval = ((int) (PHP_INT_MAX / 1000)) - 1;
+        // start a timer very far in the future
+        $timer = $this->loop->addTimer($interval, function () { });
+
+        $this->loop->futureTick(function () use ($timer) {
+            $this->loop->cancelTimer($timer);
+        });
+
+        $this->assertRunFasterThan($this->tickTimeout);
+    }
+
+    private function assertRunSlowerThan($minInterval)
+    {
+        $start = microtime(true);
 
         $this->loop->run();
+
+        $end = microtime(true);
+        $interval = $end - $start;
+
+        $this->assertLessThan($interval, $minInterval);
     }
 
     private function assertRunFasterThan($maxInterval)
diff --git a/tests/BinTest.php b/tests/BinTest.php
new file mode 100644
index 00000000..ebbad5e5
--- /dev/null
+++ b/tests/BinTest.php
@@ -0,0 +1,71 @@
+<?php
+
+namespace React\Tests\EventLoop;
+
+class BinTest extends TestCase
+{
+    /**
+     * @before
+     */
+    public function setUpBin()
+    {
+        chdir(__DIR__ . '/bin/');
+    }
+
+    public function testExecuteExampleWithoutLoopRunRunsLoopAndExecutesTicks()
+    {
+        $output = exec(escapeshellarg(PHP_BINARY) . ' 01-ticks-loop-class.php');
+
+        $this->assertEquals('abc', $output);
+    }
+
+    public function testExecuteExampleWithExplicitLoopRunRunsLoopAndExecutesTicks()
+    {
+        $output = exec(escapeshellarg(PHP_BINARY) . ' 02-ticks-loop-instance.php');
+
+        $this->assertEquals('abc', $output);
+    }
+
+    public function testExecuteExampleWithExplicitLoopRunAndStopRunsLoopAndExecutesTicksUntilStopped()
+    {
+        $output = exec(escapeshellarg(PHP_BINARY) . ' 03-ticks-loop-stop.php');
+
+        $this->assertEquals('abc', $output);
+    }
+
+    public function testExecuteExampleWithUncaughtExceptionShouldNotRunLoop()
+    {
+        $time = microtime(true);
+        exec(escapeshellarg(PHP_BINARY) . ' 11-uncaught.php 2>/dev/null');
+        $time = microtime(true) - $time;
+
+        $this->assertLessThan(1.0, $time);
+    }
+
+    public function testExecuteExampleWithUndefinedVariableShouldNotRunLoop()
+    {
+        $time = microtime(true);
+        exec(escapeshellarg(PHP_BINARY) . ' 12-undefined.php 2>/dev/null');
+        $time = microtime(true) - $time;
+
+        $this->assertLessThan(1.0, $time);
+    }
+
+    public function testExecuteExampleWithExplicitStopShouldNotRunLoop()
+    {
+        $time = microtime(true);
+        exec(escapeshellarg(PHP_BINARY) . ' 21-stop.php 2>/dev/null');
+        $time = microtime(true) - $time;
+
+        $this->assertLessThan(1.0, $time);
+    }
+
+    public function testExecuteExampleWithExplicitStopInExceptionHandlerShouldNotRunLoop()
+    {
+        $time = microtime(true);
+        exec(escapeshellarg(PHP_BINARY) . ' 22-uncaught-stop.php 2>/dev/null');
+        $time = microtime(true) - $time;
+
+        $this->assertLessThan(1.0, $time);
+    }
+}
diff --git a/tests/CallableStub.php b/tests/CallableStub.php
deleted file mode 100644
index 913d403a..00000000
--- a/tests/CallableStub.php
+++ /dev/null
@@ -1,10 +0,0 @@
-<?php
-
-namespace React\Tests\EventLoop;
-
-class CallableStub
-{
-    public function __invoke()
-    {
-    }
-}
diff --git a/tests/ExtEvLoopTest.php b/tests/ExtEvLoopTest.php
new file mode 100644
index 00000000..ab41c9f3
--- /dev/null
+++ b/tests/ExtEvLoopTest.php
@@ -0,0 +1,17 @@
+<?php
+
+namespace React\Tests\EventLoop;
+
+use React\EventLoop\ExtEvLoop;
+
+class ExtEvLoopTest extends AbstractLoopTest
+{
+    public function createLoop()
+    {
+        if (!class_exists('EvLoop')) {
+            $this->markTestSkipped('ExtEvLoop tests skipped because ext-ev extension is not installed.');
+        }
+
+        return new ExtEvLoop();
+    }
+}
diff --git a/tests/ExtEventLoopTest.php b/tests/ExtEventLoopTest.php
index 71f798c1..ce40ba58 100644
--- a/tests/ExtEventLoopTest.php
+++ b/tests/ExtEventLoopTest.php
@@ -6,6 +6,9 @@
 
 class ExtEventLoopTest extends AbstractLoopTest
 {
+    /** @var ?string */
+    private $fifoPath;
+
     public function createLoop($readStreamCompatible = false)
     {
         if ('Linux' === PHP_OS && !extension_loaded('posix')) {
@@ -16,13 +19,17 @@ public function createLoop($readStreamCompatible = false)
             $this->markTestSkipped('ext-event tests skipped because ext-event is not installed.');
         }
 
-        $cfg = null;
-        if ($readStreamCompatible) {
-            $cfg = new \EventConfig();
-            $cfg->requireFeatures(\EventConfig::FEATURE_FDS);
-        }
+        return new ExtEventLoop();
+    }
 
-        return new ExtEventLoop($cfg);
+    /**
+     * @after
+     */
+    public function tearDownFile()
+    {
+        if ($this->fifoPath !== null && file_exists($this->fifoPath)) {
+            unlink($this->fifoPath);
+        }
     }
 
     public function createStream()
@@ -31,6 +38,7 @@ public function createStream()
         // descriptors when using the EPOLL back-end.
         if ('Linux' === PHP_OS) {
             $this->fifoPath = tempnam(sys_get_temp_dir(), 'react-');
+            assert(is_string($this->fifoPath));
 
             unlink($this->fifoPath);
 
@@ -62,29 +70,4 @@ public function writeToStream($stream, $content)
 
         fwrite($stream, $content);
     }
-
-    /**
-     * @group epoll-readable-error
-     */
-    public function testCanUseReadableStreamWithFeatureFds()
-    {
-        if (PHP_VERSION_ID > 70000) {
-            $this->markTestSkipped('Memory stream not supported');
-        }
-
-        $this->loop = $this->createLoop(true);
-
-        $input = fopen('php://temp/maxmemory:0', 'r+');
-
-        fwrite($input, 'x');
-        ftruncate($input, 0);
-
-        $this->loop->addReadStream($input, $this->expectCallableExactly(2));
-
-        $this->writeToStream($input, "foo\n");
-        $this->loop->tick();
-
-        $this->writeToStream($input, "bar\n");
-        $this->loop->tick();
-    }
 }
diff --git a/tests/ExtUvLoopTest.php b/tests/ExtUvLoopTest.php
new file mode 100644
index 00000000..45b251ef
--- /dev/null
+++ b/tests/ExtUvLoopTest.php
@@ -0,0 +1,93 @@
+<?php
+
+namespace React\Tests\EventLoop;
+
+use React\EventLoop\ExtUvLoop;
+
+class ExtUvLoopTest extends AbstractLoopTest
+{
+    public function createLoop()
+    {
+        if (!function_exists('uv_loop_new')) {
+            $this->markTestSkipped('uv tests skipped because ext-uv is not installed.');
+        }
+
+        return new ExtUvLoop();
+    }
+
+    /** @dataProvider intervalProvider */
+    public function testTimerInterval($interval, $expectedExceptionMessage)
+    {
+        $this->expectException('InvalidArgumentException');
+        $this->expectExceptionMessage($expectedExceptionMessage);
+
+        $this->loop
+            ->addTimer(
+                $interval,
+                function () {
+                    return 0;
+                }
+            );
+    }
+
+    public function intervalProvider()
+    {
+        $oversizeInterval = PHP_INT_MAX / 1000;
+        $maxValue = (int) (PHP_INT_MAX / 1000);
+        $oneMaxValue = $maxValue + 1;
+        $tenMaxValue = $maxValue + 10;
+        $tenMillionsMaxValue = $maxValue + 10000000;
+        $intMax = PHP_INT_MAX;
+        $oneIntMax = PHP_INT_MAX + 1;
+        $tenIntMax = PHP_INT_MAX + 10;
+        $oneHundredIntMax = PHP_INT_MAX + 100;
+        $oneThousandIntMax = PHP_INT_MAX + 1000;
+        $tenMillionsIntMax = PHP_INT_MAX + 10000000;
+        $tenThousandsTimesIntMax = PHP_INT_MAX * 1000;
+
+        yield [
+            $oversizeInterval,
+            "Interval overflow, value must be lower than '{$maxValue}', but '{$oversizeInterval}' passed."
+        ];
+        yield [
+            $oneMaxValue,
+            "Interval overflow, value must be lower than '{$maxValue}', but '{$oneMaxValue}' passed.",
+        ];
+        yield [
+            $tenMaxValue,
+            "Interval overflow, value must be lower than '{$maxValue}', but '{$tenMaxValue}' passed.",
+        ];
+        yield [
+            $tenMillionsMaxValue,
+            "Interval overflow, value must be lower than '{$maxValue}', but '{$tenMillionsMaxValue}' passed.",
+        ];
+        yield [
+            $intMax,
+            "Interval overflow, value must be lower than '{$maxValue}', but '{$intMax}' passed.",
+        ];
+        yield [
+            $oneIntMax,
+            "Interval overflow, value must be lower than '{$maxValue}', but '{$oneIntMax}' passed.",
+        ];
+        yield [
+            $tenIntMax,
+            "Interval overflow, value must be lower than '{$maxValue}', but '{$tenIntMax}' passed.",
+        ];
+        yield [
+            $oneHundredIntMax,
+            "Interval overflow, value must be lower than '{$maxValue}', but '{$oneHundredIntMax}' passed.",
+        ];
+        yield [
+            $oneThousandIntMax,
+            "Interval overflow, value must be lower than '{$maxValue}', but '{$oneThousandIntMax}' passed.",
+        ];
+        yield [
+            $tenMillionsIntMax,
+            "Interval overflow, value must be lower than '{$maxValue}', but '{$tenMillionsIntMax}' passed.",
+        ];
+        yield [
+            $tenThousandsTimesIntMax,
+            "Interval overflow, value must be lower than '{$maxValue}', but '{$tenThousandsTimesIntMax}' passed.",
+        ];
+    }
+}
diff --git a/tests/LibEvLoopTest.php b/tests/LibEvLoopTest.php
deleted file mode 100644
index 5ea98e30..00000000
--- a/tests/LibEvLoopTest.php
+++ /dev/null
@@ -1,22 +0,0 @@
-<?php
-
-namespace React\Tests\EventLoop;
-
-use React\EventLoop\LibEvLoop;
-
-class LibEvLoopTest extends AbstractLoopTest
-{
-    public function createLoop()
-    {
-        if (!class_exists('libev\EventLoop')) {
-            $this->markTestSkipped('libev tests skipped because ext-libev is not installed.');
-        }
-
-        return new LibEvLoop();
-    }
-
-    public function testLibEvConstructor()
-    {
-        $loop = new LibEvLoop();
-    }
-}
diff --git a/tests/LibEventLoopTest.php b/tests/LibEventLoopTest.php
deleted file mode 100644
index 920b33cc..00000000
--- a/tests/LibEventLoopTest.php
+++ /dev/null
@@ -1,58 +0,0 @@
-<?php
-
-namespace React\Tests\EventLoop;
-
-use React\EventLoop\LibEventLoop;
-
-class LibEventLoopTest extends AbstractLoopTest
-{
-    private $fifoPath;
-
-    public function createLoop()
-    {
-        if ('Linux' === PHP_OS && !extension_loaded('posix')) {
-            $this->markTestSkipped('libevent tests skipped on linux due to linux epoll issues.');
-        }
-
-        if (!function_exists('event_base_new')) {
-            $this->markTestSkipped('libevent tests skipped because ext-libevent is not installed.');
-        }
-
-        return new LibEventLoop();
-    }
-
-    public function tearDown()
-    {
-        if (file_exists($this->fifoPath)) {
-            unlink($this->fifoPath);
-        }
-    }
-
-    public function createStream()
-    {
-        if ('Linux' !== PHP_OS) {
-            return parent::createStream();
-        }
-
-        $this->fifoPath = tempnam(sys_get_temp_dir(), 'react-');
-
-        unlink($this->fifoPath);
-
-        // Use a FIFO on linux to get around lack of support for disk-based file
-        // descriptors when using the EPOLL back-end.
-        posix_mkfifo($this->fifoPath, 0600);
-
-        $stream = fopen($this->fifoPath, 'r+');
-
-        return $stream;
-    }
-
-    public function writeToStream($stream, $content)
-    {
-        if ('Linux' !== PHP_OS) {
-            return parent::writeToStream($stream, $content);
-        }
-
-        fwrite($stream, $content);
-    }
-}
diff --git a/tests/LoopTest.php b/tests/LoopTest.php
new file mode 100644
index 00000000..08e2107e
--- /dev/null
+++ b/tests/LoopTest.php
@@ -0,0 +1,350 @@
+<?php
+
+namespace React\Tests\EventLoop;
+
+use React\EventLoop\Loop;
+use React\EventLoop\LoopInterface;
+use React\EventLoop\TimerInterface;
+
+final class LoopTest extends TestCase
+{
+    /**
+     * @dataProvider numberOfTests
+     */
+    public function testCallingLoopGetShouldAlwaysReturnTheSameEventLoop()
+    {
+        self::assertSame(Loop::get(), Loop::get());
+    }
+
+    /**
+     * Run several tests several times to ensure we reset the loop between tests and code is still behavior as expected.
+     *
+     * @return array<array>
+     */
+    public function numberOfTests()
+    {
+        return [[], [], []];
+    }
+
+    public function testStaticAddReadStreamCallsAddReadStreamOnLoopInstance()
+    {
+        $stream = tmpfile();
+        $listener = function () { };
+
+        $loop = $this->createMock(LoopInterface::class);
+        $loop->expects($this->once())->method('addReadStream')->with($stream, $listener);
+
+        Loop::set($loop);
+
+        Loop::addReadStream($stream, $listener);
+    }
+
+    public function testStaticAddReadStreamWithNoDefaultLoopCallsAddReadStreamOnNewLoopInstance()
+    {
+        $ref = new \ReflectionProperty(Loop::class, 'instance');
+        $ref->setAccessible(true);
+        $ref->setValue(null, null);
+
+        $stream = stream_socket_server('127.0.0.1:0');
+        $listener = function () { };
+        Loop::addReadStream($stream, $listener);
+
+        $this->assertInstanceOf(LoopInterface::class, $ref->getValue());
+    }
+
+    public function testStaticAddWriteStreamCallsAddWriteStreamOnLoopInstance()
+    {
+        $stream = tmpfile();
+        $listener = function () { };
+
+        $loop = $this->createMock(LoopInterface::class);
+        $loop->expects($this->once())->method('addWriteStream')->with($stream, $listener);
+
+        Loop::set($loop);
+
+        Loop::addWriteStream($stream, $listener);
+    }
+
+    public function testStaticAddWriteStreamWithNoDefaultLoopCallsAddWriteStreamOnNewLoopInstance()
+    {
+        $ref = new \ReflectionProperty(Loop::class, 'instance');
+        $ref->setAccessible(true);
+        $ref->setValue(null, null);
+
+        $stream = stream_socket_server('127.0.0.1:0');
+        $listener = function () { };
+        Loop::addWriteStream($stream, $listener);
+
+        $this->assertInstanceOf(LoopInterface::class, $ref->getValue());
+    }
+
+    public function testStaticRemoveReadStreamCallsRemoveReadStreamOnLoopInstance()
+    {
+        $stream = tmpfile();
+
+        $loop = $this->createMock(LoopInterface::class);
+        $loop->expects($this->once())->method('removeReadStream')->with($stream);
+
+        Loop::set($loop);
+
+        Loop::removeReadStream($stream);
+    }
+
+    public function testStaticRemoveReadStreamWithNoDefaultLoopIsNoOp()
+    {
+        $ref = new \ReflectionProperty(Loop::class, 'instance');
+        $ref->setAccessible(true);
+        $ref->setValue(null, null);
+
+        $stream = tmpfile();
+        Loop::removeReadStream($stream);
+
+        $this->assertNull($ref->getValue());
+    }
+
+    public function testStaticRemoveWriteStreamCallsRemoveWriteStreamOnLoopInstance()
+    {
+        $stream = tmpfile();
+
+        $loop = $this->createMock(LoopInterface::class);
+        $loop->expects($this->once())->method('removeWriteStream')->with($stream);
+
+        Loop::set($loop);
+
+        Loop::removeWriteStream($stream);
+    }
+
+    public function testStaticRemoveWriteStreamWithNoDefaultLoopIsNoOp()
+    {
+        $ref = new \ReflectionProperty(Loop::class, 'instance');
+        $ref->setAccessible(true);
+        $ref->setValue(null, null);
+
+        $stream = tmpfile();
+        Loop::removeWriteStream($stream);
+
+        $this->assertNull($ref->getValue());
+    }
+
+    public function testStaticAddTimerCallsAddTimerOnLoopInstanceAndReturnsTimerInstance()
+    {
+        $interval = 1.0;
+        $callback = function () { };
+        $timer = $this->createMock(TimerInterface::class);
+
+        $loop = $this->createMock(LoopInterface::class);
+        $loop->expects($this->once())->method('addTimer')->with($interval, $callback)->willReturn($timer);
+
+        Loop::set($loop);
+
+        $ret = Loop::addTimer($interval, $callback);
+
+        $this->assertSame($timer, $ret);
+    }
+
+    public function testStaticAddTimerWithNoDefaultLoopCallsAddTimerOnNewLoopInstance()
+    {
+        $ref = new \ReflectionProperty(Loop::class, 'instance');
+        $ref->setAccessible(true);
+        $ref->setValue(null, null);
+
+        $interval = 1.0;
+        $callback = function () { };
+        $ret = Loop::addTimer($interval, $callback);
+
+        $this->assertInstanceOf(TimerInterface::class, $ret);
+        $this->assertInstanceOf(LoopInterface::class, $ref->getValue());
+    }
+
+    public function testStaticAddPeriodicTimerCallsAddPeriodicTimerOnLoopInstanceAndReturnsTimerInstance()
+    {
+        $interval = 1.0;
+        $callback = function () { };
+        $timer = $this->createMock(TimerInterface::class);
+
+        $loop = $this->createMock(LoopInterface::class);
+        $loop->expects($this->once())->method('addPeriodicTimer')->with($interval, $callback)->willReturn($timer);
+
+        Loop::set($loop);
+
+        $ret = Loop::addPeriodicTimer($interval, $callback);
+
+        $this->assertSame($timer, $ret);
+    }
+
+    public function testStaticAddPeriodicTimerWithNoDefaultLoopCallsAddPeriodicTimerOnNewLoopInstance()
+    {
+        $ref = new \ReflectionProperty(Loop::class, 'instance');
+        $ref->setAccessible(true);
+        $ref->setValue(null, null);
+
+        $interval = 1.0;
+        $callback = function () { };
+        $ret = Loop::addPeriodicTimer($interval, $callback);
+
+        $this->assertInstanceOf(TimerInterface::class, $ret);
+        $this->assertInstanceOf(LoopInterface::class, $ref->getValue());
+    }
+
+
+    public function testStaticCancelTimerCallsCancelTimerOnLoopInstance()
+    {
+        $timer = $this->createMock(TimerInterface::class);
+
+        $loop = $this->createMock(LoopInterface::class);
+        $loop->expects($this->once())->method('cancelTimer')->with($timer);
+
+        Loop::set($loop);
+
+        Loop::cancelTimer($timer);
+    }
+
+    public function testStaticCancelTimerWithNoDefaultLoopIsNoOp()
+    {
+        $ref = new \ReflectionProperty(Loop::class, 'instance');
+        $ref->setAccessible(true);
+        $ref->setValue(null, null);
+
+        $timer = $this->createMock(TimerInterface::class);
+        Loop::cancelTimer($timer);
+
+        $this->assertNull($ref->getValue());
+    }
+
+    public function testStaticFutureTickCallsFutureTickOnLoopInstance()
+    {
+        $listener = function () { };
+
+        $loop = $this->createMock(LoopInterface::class);
+        $loop->expects($this->once())->method('futureTick')->with($listener);
+
+        Loop::set($loop);
+
+        Loop::futureTick($listener);
+    }
+
+    public function testStaticFutureTickWithNoDefaultLoopCallsFutureTickOnNewLoopInstance()
+    {
+        $ref = new \ReflectionProperty(Loop::class, 'instance');
+        $ref->setAccessible(true);
+        $ref->setValue(null, null);
+
+        $listener = function () { };
+        Loop::futureTick($listener);
+
+        $this->assertInstanceOf(LoopInterface::class, $ref->getValue());
+    }
+
+    public function testStaticAddSignalCallsAddSignalOnLoopInstance()
+    {
+        $signal = 1;
+        $listener = function () { };
+
+        $loop = $this->createMock(LoopInterface::class);
+        $loop->expects($this->once())->method('addSignal')->with($signal, $listener);
+
+        Loop::set($loop);
+
+        Loop::addSignal($signal, $listener);
+    }
+
+    public function testStaticAddSignalWithNoDefaultLoopCallsAddSignalOnNewLoopInstance()
+    {
+        if (DIRECTORY_SEPARATOR === '\\') {
+            $this->markTestSkipped('Not supported on Windows');
+        }
+
+        $ref = new \ReflectionProperty(Loop::class, 'instance');
+        $ref->setAccessible(true);
+        $ref->setValue(null, null);
+
+        $signal = 1;
+        $listener = function () { };
+        try {
+            Loop::addSignal($signal, $listener);
+        } catch (\BadMethodCallException $e) {
+            $this->markTestSkipped('Skipped: ' . $e->getMessage());
+        }
+
+        $this->assertInstanceOf(LoopInterface::class, $ref->getValue());
+    }
+
+    public function testStaticRemoveSignalCallsRemoveSignalOnLoopInstance()
+    {
+        $signal = 1;
+        $listener = function () { };
+
+        $loop = $this->createMock(LoopInterface::class);
+        $loop->expects($this->once())->method('removeSignal')->with($signal, $listener);
+
+        Loop::set($loop);
+
+        Loop::removeSignal($signal, $listener);
+    }
+
+    public function testStaticRemoveSignalWithNoDefaultLoopIsNoOp()
+    {
+        $ref = new \ReflectionProperty(Loop::class, 'instance');
+        $ref->setAccessible(true);
+        $ref->setValue(null, null);
+
+        $signal = 1;
+        $listener = function () { };
+        Loop::removeSignal($signal, $listener);
+
+        $this->assertNull($ref->getValue());
+    }
+
+    public function testStaticRunCallsRunOnLoopInstance()
+    {
+        $loop = $this->createMock(LoopInterface::class);
+        $loop->expects($this->once())->method('run')->with();
+
+        Loop::set($loop);
+
+        Loop::run();
+    }
+
+    public function testStaticRunWithNoDefaultLoopCallsRunsOnNewLoopInstance()
+    {
+        $ref = new \ReflectionProperty(Loop::class, 'instance');
+        $ref->setAccessible(true);
+        $ref->setValue(null, null);
+
+        Loop::run();
+
+        $this->assertInstanceOf(LoopInterface::class, $ref->getValue());
+    }
+
+    public function testStaticStopCallsStopOnLoopInstance()
+    {
+        $loop = $this->createMock(LoopInterface::class);
+        $loop->expects($this->once())->method('stop')->with();
+
+        Loop::set($loop);
+
+        Loop::stop();
+    }
+
+    public function testStaticStopCallWithNoDefaultLoopIsNoOp()
+    {
+        $ref = new \ReflectionProperty(Loop::class, 'instance');
+        $ref->setAccessible(true);
+        $ref->setValue(null, null);
+
+        Loop::stop();
+
+        $this->assertNull($ref->getValue());
+    }
+
+    /**
+     * @after
+     * @before
+     */
+    public function unsetLoopFromLoopAccessor()
+    {
+        $ref = new \ReflectionProperty(Loop::class, 'instance');
+        $ref->setAccessible(true);
+        $ref->setValue(null, null);
+    }
+}
diff --git a/tests/SignalsHandlerTest.php b/tests/SignalsHandlerTest.php
new file mode 100644
index 00000000..a8cc4221
--- /dev/null
+++ b/tests/SignalsHandlerTest.php
@@ -0,0 +1,58 @@
+<?php
+
+namespace React\Tests\EventLoop;
+
+use React\EventLoop\SignalsHandler;
+
+final class SignalsHandlerTest extends TestCase
+{
+    /**
+     * @requires extension pcntl
+     */
+    public function testEmittedEventsAndCallHandling()
+    {
+        $callCount = 0;
+        $func = function () use (&$callCount) {
+            $callCount++;
+        };
+        $signals = new SignalsHandler();
+
+        $this->assertSame(0, $callCount);
+
+        $signals->add(SIGUSR1, $func);
+        $this->assertSame(0, $callCount);
+
+        $signals->add(SIGUSR1, $func);
+        $this->assertSame(0, $callCount);
+
+        $signals->add(SIGUSR1, $func);
+        $this->assertSame(0, $callCount);
+
+        $signals->call(SIGUSR1);
+        $this->assertSame(1, $callCount);
+
+        $signals->add(SIGUSR2, $func);
+        $this->assertSame(1, $callCount);
+
+        $signals->add(SIGUSR2, $func);
+        $this->assertSame(1, $callCount);
+
+        $signals->call(SIGUSR2);
+        $this->assertSame(2, $callCount);
+
+        $signals->remove(SIGUSR2, $func);
+        $this->assertSame(2, $callCount);
+
+        $signals->remove(SIGUSR2, $func);
+        $this->assertSame(2, $callCount);
+
+        $signals->call(SIGUSR2);
+        $this->assertSame(2, $callCount);
+
+        $signals->remove(SIGUSR1, $func);
+        $this->assertSame(2, $callCount);
+
+        $signals->call(SIGUSR1);
+        $this->assertSame(2, $callCount);
+    }
+}
diff --git a/tests/StreamSelectLoopTest.php b/tests/StreamSelectLoopTest.php
index 61b059c1..b2672d4e 100644
--- a/tests/StreamSelectLoopTest.php
+++ b/tests/StreamSelectLoopTest.php
@@ -7,7 +7,10 @@
 
 class StreamSelectLoopTest extends AbstractLoopTest
 {
-    protected function tearDown()
+    /**
+     * @after
+     */
+    protected function tearDownSignalHandlers()
     {
         parent::tearDown();
         if (strncmp($this->getName(false), 'testSignal', 10) === 0 && extension_loaded('pcntl')) {
@@ -37,86 +40,149 @@ public function testStreamSelectTimeoutEmulation()
         $this->assertGreaterThan(0.04, $interval);
     }
 
-    public function signalProvider()
+    public function testStreamSelectReportsWarningForStreamWithFilter()
     {
-        return [
-            ['SIGUSR1', SIGUSR1],
-            ['SIGHUP', SIGHUP],
-            ['SIGTERM', SIGTERM],
-        ];
+        $stream = tmpfile();
+        stream_filter_append($stream, 'string.rot13');
+
+        $this->loop->addReadStream($stream, $this->expectCallableNever());
+
+        $this->loop->futureTick(function () use ($stream) {
+            $this->loop->futureTick(function () use ($stream) {
+                $this->loop->removeReadStream($stream);
+            });
+        });
+
+        $error = null;
+        $previous = set_error_handler(function ($_, $errstr) use (&$error) {
+            $error = $errstr;
+        });
+
+        try {
+            $this->loop->run();
+        } catch (\ValueError $e) {
+            // ignore ValueError for PHP 8+ due to empty stream array
+        }
+
+        restore_error_handler();
+
+        $this->assertNotNull($error);
+
+        $now = set_error_handler(function () { });
+        restore_error_handler();
+        $this->assertEquals($previous, $now);
+    }
+
+    public function testStreamSelectThrowsWhenCustomErrorHandlerThrowsForStreamWithFilter()
+    {
+        $stream = tmpfile();
+        stream_filter_append($stream, 'string.rot13');
+
+        $this->loop->addReadStream($stream, $this->expectCallableNever());
+
+        $this->loop->futureTick(function () use ($stream) {
+            $this->loop->futureTick(function () use ($stream) {
+                $this->loop->removeReadStream($stream);
+            });
+        });
+
+        $previous = set_error_handler(function ($_, $errstr) {
+            throw new \RuntimeException($errstr);
+        });
+
+        $e = null;
+        try {
+            $this->loop->run();
+            restore_error_handler();
+            $this->fail();
+        } catch (\RuntimeException $e) {
+            restore_error_handler();
+        } catch (\ValueError $e) {
+            restore_error_handler(); // PHP 8+
+            $e = $e->getPrevious();
+        }
+
+        $this->assertInstanceOf(\RuntimeException::class, $e);
+
+        $now = set_error_handler(function () { });
+        restore_error_handler();
+        $this->assertEquals($previous, $now);
     }
 
-    private $_signalHandled = false;
+    public function signalProvider()
+    {
+        yield ['SIGUSR1'];
+        yield ['SIGHUP'];
+        yield ['SIGTERM'];
+    }
 
     /**
      * Test signal interrupt when no stream is attached to the loop
      * @dataProvider signalProvider
+     * @requires extension pcntl
+     * @requires function pcntl_signal()
+     * @requires function pcntl_signal_dispatch()
      */
-    public function testSignalInterruptNoStream($sigName, $signal)
+    public function testSignalInterruptNoStream($signal)
     {
-        if (!extension_loaded('pcntl')) {
-            $this->markTestSkipped('"pcntl" extension is required to run this test.');
-        }
-
-        // dispatch signal handler once before signal is sent and once after
-        $this->loop->addTimer(0.01, function() { pcntl_signal_dispatch(); });
-        $this->loop->addTimer(0.03, function() { pcntl_signal_dispatch(); });
-        if (defined('HHVM_VERSION')) {
-            // hhvm startup is slow so we need to add another handler much later
-            $this->loop->addTimer(0.5, function() { pcntl_signal_dispatch(); });
-        }
+        // dispatch signal handler every 10ms for 0.1s
+        $check = $this->loop->addPeriodicTimer(0.01, function() {
+            pcntl_signal_dispatch();
+        });
+        $this->loop->addTimer(0.1, function () use ($check) {
+            $this->loop->cancelTimer($check);
+        });
 
-        $this->setUpSignalHandler($signal);
+        $handled = false;
+        $this->assertTrue(pcntl_signal(constant($signal), function () use (&$handled) {
+            $handled = true;
+        }));
 
         // spawn external process to send signal to current process id
         $this->forkSendSignal($signal);
+
         $this->loop->run();
-        $this->assertTrue($this->_signalHandled);
+        $this->assertTrue($handled);
     }
 
     /**
      * Test signal interrupt when a stream is attached to the loop
      * @dataProvider signalProvider
+     * @requires extension pcntl
+     * @requires function pcntl_signal()
+     * @requires function pcntl_signal_dispatch()
      */
-    public function testSignalInterruptWithStream($sigName, $signal)
+    public function testSignalInterruptWithStream($signal)
     {
-        if (!extension_loaded('pcntl')) {
-            $this->markTestSkipped('"pcntl" extension is required to run this test.');
-        }
-
         // dispatch signal handler every 10ms
-        $this->loop->addPeriodicTimer(0.01, function() { pcntl_signal_dispatch(); });
+        $this->loop->addPeriodicTimer(0.01, function() {
+            pcntl_signal_dispatch();
+        });
 
         // add stream to the loop
-        list($writeStream, $readStream) = stream_socket_pair(STREAM_PF_UNIX, STREAM_SOCK_STREAM, STREAM_IPPROTO_IP);
-        $this->loop->addReadStream($readStream, function($stream, $loop) {
+        list($writeStream, $readStream) = $this->createSocketPair();
+        $this->loop->addReadStream($readStream, function ($stream) {
             /** @var $loop LoopInterface */
             $read = fgets($stream);
             if ($read === "end loop\n") {
-                $loop->stop();
+                $this->loop->stop();
             }
         });
-        $this->loop->addTimer(0.05, function() use ($writeStream) {
+        $this->loop->addTimer(0.1, function() use ($writeStream) {
             fwrite($writeStream, "end loop\n");
         });
 
-        $this->setUpSignalHandler($signal);
+        $handled = false;
+        $this->assertTrue(pcntl_signal(constant($signal), function () use (&$handled) {
+            $handled = true;
+        }));
 
         // spawn external process to send signal to current process id
         $this->forkSendSignal($signal);
 
         $this->loop->run();
 
-        $this->assertTrue($this->_signalHandled);
-    }
-
-    /**
-     * add signal handler for signal
-     */
-    protected function setUpSignalHandler($signal)
-    {
-        $this->_signalHandled = false;
-        $this->assertTrue(pcntl_signal($signal, function() { $this->_signalHandled = true; }));
+        $this->assertTrue($handled);
     }
 
     /**
@@ -125,7 +191,7 @@ protected function setUpSignalHandler($signal)
     protected function resetSignalHandlers()
     {
         foreach($this->signalProvider() as $signal) {
-            pcntl_signal($signal[1], SIG_DFL);
+            pcntl_signal(constant($signal[0]), SIG_DFL);
         }
     }
 
@@ -141,7 +207,7 @@ protected function forkSendSignal($signal)
         } else if ($childPid === 0) {
             // this is executed in the child process
             usleep(20000);
-            posix_kill($currentPid, $signal);
+            posix_kill($currentPid, constant($signal));
             die();
         }
     }
diff --git a/tests/TestCase.php b/tests/TestCase.php
index 5114f4e0..55f04cf3 100644
--- a/tests/TestCase.php
+++ b/tests/TestCase.php
@@ -2,7 +2,10 @@
 
 namespace React\Tests\EventLoop;
 
-class TestCase extends \PHPUnit_Framework_TestCase
+use PHPUnit\Framework\TestCase as BaseTestCase;
+use React\EventLoop\LoopInterface;
+
+class TestCase extends BaseTestCase
 {
     protected function expectCallableExactly($amount)
     {
@@ -36,6 +39,22 @@ protected function expectCallableNever()
 
     protected function createCallableMock()
     {
-        return $this->getMockBuilder('React\Tests\EventLoop\CallableStub')->getMock();
+        $builder = $this->getMockBuilder(\stdClass::class);
+        if (method_exists($builder, 'addMethods')) {
+            // PHPUnit 9+
+            return $builder->addMethods(['__invoke'])->getMock();
+        } else {
+            // legacy PHPUnit
+            return $builder->setMethods(['__invoke'])->getMock();
+        }
+    }
+
+    protected function tickLoop(LoopInterface $loop)
+    {
+        $loop->futureTick(function () use ($loop) {
+            $loop->stop();
+        });
+
+        $loop->run();
     }
 }
diff --git a/tests/Timer/AbstractTimerTest.php b/tests/Timer/AbstractTimerTest.php
index 57689658..81099ff9 100644
--- a/tests/Timer/AbstractTimerTest.php
+++ b/tests/Timer/AbstractTimerTest.php
@@ -2,96 +2,161 @@
 
 namespace React\Tests\EventLoop\Timer;
 
+use React\EventLoop\LoopInterface;
+use React\EventLoop\TimerInterface;
 use React\Tests\EventLoop\TestCase;
 
 abstract class AbstractTimerTest extends TestCase
 {
+    /**
+     * @return LoopInterface
+     */
     abstract public function createLoop();
 
-    public function testAddTimer()
+    public function testAddTimerReturnsNonPeriodicTimerInstance()
     {
-        // usleep is intentionally high
-
         $loop = $this->createLoop();
 
-        $loop->addTimer(0.001, $this->expectCallableOnce());
-        usleep(1000);
-        $loop->tick();
+        $timer = $loop->addTimer(0.001, $this->expectCallableNever());
+
+        $this->assertInstanceOf(TimerInterface::class, $timer);
+        $this->assertFalse($timer->isPeriodic());
     }
 
-    public function testAddPeriodicTimer()
+    public function testAddTimerWillBeInvokedOnceAndBlocksLoopWhenRunning()
     {
         $loop = $this->createLoop();
 
-        $loop->addPeriodicTimer(0.001, $this->expectCallableExactly(3));
-        usleep(1000);
-        $loop->tick();
-        usleep(1000);
-        $loop->tick();
-        usleep(1000);
-        $loop->tick();
+        $loop->addTimer(0.005, $this->expectCallableOnce());
+
+        $start = microtime(true);
+        $loop->run();
+        $end = microtime(true);
+
+        // 1 invocation should take 5ms (± a few milliseconds due to timer inaccuracies)
+        // make no strict assumptions about time interval, must at least take 1ms
+        // and should not take longer than 0.1s for slower loops.
+        $this->assertGreaterThanOrEqual(0.001, $end - $start);
+        $this->assertLessThan(0.1, $end - $start);
     }
 
-    public function testAddPeriodicTimerWithCancel()
+    public function testAddPeriodicTimerReturnsPeriodicTimerInstance()
     {
         $loop = $this->createLoop();
 
-        $timer = $loop->addPeriodicTimer(0.001, $this->expectCallableExactly(2));
+        $periodic = $loop->addPeriodicTimer(0.1, $this->expectCallableNever());
+
+        $this->assertInstanceOf(TimerInterface::class, $periodic);
+        $this->assertTrue($periodic->isPeriodic());
+    }
 
-        usleep(1000);
-        $loop->tick();
-        usleep(1000);
-        $loop->tick();
+    public function testAddPeriodicTimerWillBeInvokedUntilItIsCancelled()
+    {
+        $loop = $this->createLoop();
 
-        $timer->cancel();
+        $periodic = $loop->addPeriodicTimer(0.1, $this->expectCallableExactly(3));
+
+        // make no strict assumptions about actual time interval.
+        // leave some room to ensure this ticks exactly 3 times.
+        $loop->addTimer(0.350, function () use ($loop, $periodic) {
+            $loop->cancelTimer($periodic);
+        });
 
-        usleep(1000);
-        $loop->tick();
+        $loop->run();
     }
 
-    public function testAddPeriodicTimerCancelsItself()
+    public function testAddPeriodicTimerWillBeInvokedWithMaximumAccuracyUntilItIsCancelled()
     {
+        $loop = $this->createLoop();
+
         $i = 0;
+        $periodic = $loop->addPeriodicTimer(0.001, function () use (&$i) {
+            ++$i;
+        });
+
+        $loop->addTimer(0.1, function () use ($loop, $periodic) {
+            $loop->cancelTimer($periodic);
+        });
+
+        $loop->run();
 
+        // make no strict assumptions about number of invocations.
+        // we know it must be no more than 100 times and should at least be
+        // invoked 4 times for really slow loops
+        $this->assertLessThanOrEqual(100, $i);
+        $this->assertGreaterThanOrEqual(4, $i);
+    }
+
+    public function testAddPeriodicTimerCancelsItself()
+    {
         $loop = $this->createLoop();
 
-        $loop->addPeriodicTimer(0.001, function ($timer) use (&$i) {
+        $i = 0;
+        $loop->addPeriodicTimer(0.001, function ($timer) use (&$i, $loop) {
             $i++;
 
-            if ($i == 2) {
-                $timer->cancel();
+            if ($i === 5) {
+                $loop->cancelTimer($timer);
             }
         });
 
-        usleep(1000);
-        $loop->tick();
-        usleep(1000);
-        $loop->tick();
-        usleep(1000);
-        $loop->tick();
+        $start = microtime(true);
+        $loop->run();
+        $end = microtime(true);
+
+        $this->assertEquals(5, $i);
 
-        $this->assertSame(2, $i);
+        // 5 invocations should take 5ms (± 1ms due to timer inaccuracies)
+        // make no strict assumptions about time interval, must at least take 4ms
+        // and should not take longer than 0.2s for slower loops.
+        $this->assertGreaterThanOrEqual(0.004, $end - $start);
+        $this->assertLessThan(0.2, $end - $start);
     }
 
-    public function testIsTimerActive()
+    public function testMinimumIntervalOneMicrosecond()
     {
         $loop = $this->createLoop();
 
-        $timer = $loop->addPeriodicTimer(0.001, function () {});
+        $timer = $loop->addTimer(0, function () {});
+
+        $this->assertEquals(0.000001, $timer->getInterval());
+    }
 
-        $this->assertTrue($loop->isTimerActive($timer));
+    public function testAddPeriodicTimerWithZeroIntervalWillExecuteCallbackFunctionAtLeastTwice()
+    {
+        $loop = $this->createLoop();
 
-        $timer->cancel();
+        $timeout = $loop->addTimer(2, $this->expectCallableNever()); //Timeout the test after two seconds if the periodic timer hasn't fired twice
 
-        $this->assertFalse($loop->isTimerActive($timer));
+        $i = 0;
+        $loop->addPeriodicTimer(0, function ($timer) use (&$i, $loop, $timeout) {
+            ++$i;
+            if ($i === 2) {
+                $loop->cancelTimer($timer);
+                $loop->cancelTimer($timeout);
+            }
+        });
+
+        $loop->run();
+
+        $this->assertEquals(2, $i);
     }
 
-    public function testMinimumIntervalOneMicrosecond()
+    public function testTimerIntervalBelowZeroRunsImmediately()
     {
         $loop = $this->createLoop();
+        $start = 0;
+        $loop->addTimer(
+            -1,
+            function () use (&$start) {
+                $start = \microtime(true);
+            }
+        );
 
-        $timer = $loop->addTimer(0, function () {});
+        $loop->run();
+        $end = \microtime(true);
 
-        $this->assertEquals(0.000001, $timer->getInterval());
+        // 1ms should be enough even on slow machines (± 1ms due to timer inaccuracies)
+        $this->assertLessThan(0.002, $end - $start);
     }
 }
diff --git a/tests/Timer/ExtEvTimerTest.php b/tests/Timer/ExtEvTimerTest.php
new file mode 100644
index 00000000..bfa91861
--- /dev/null
+++ b/tests/Timer/ExtEvTimerTest.php
@@ -0,0 +1,17 @@
+<?php
+
+namespace React\Tests\EventLoop\Timer;
+
+use React\EventLoop\ExtEvLoop;
+
+class ExtEvTimerTest extends AbstractTimerTest
+{
+    public function createLoop()
+    {
+        if (!class_exists('EvLoop')) {
+            $this->markTestSkipped('ExtEvLoop tests skipped because ext-ev extension is not installed.');
+        }
+
+        return new ExtEvLoop();
+    }
+}
diff --git a/tests/Timer/ExtUvTimerTest.php b/tests/Timer/ExtUvTimerTest.php
new file mode 100644
index 00000000..e0c70233
--- /dev/null
+++ b/tests/Timer/ExtUvTimerTest.php
@@ -0,0 +1,17 @@
+<?php
+
+namespace React\Tests\EventLoop\Timer;
+
+use React\EventLoop\ExtUvLoop;
+
+class ExtUvTimerTest extends AbstractTimerTest
+{
+    public function createLoop()
+    {
+        if (!function_exists('uv_loop_new')) {
+            $this->markTestSkipped('uv tests skipped because ext-uv is not installed.');
+        }
+
+        return new ExtUvLoop();
+    }
+}
diff --git a/tests/Timer/LibEvTimerTest.php b/tests/Timer/LibEvTimerTest.php
deleted file mode 100644
index 73abe8ed..00000000
--- a/tests/Timer/LibEvTimerTest.php
+++ /dev/null
@@ -1,17 +0,0 @@
-<?php
-
-namespace React\Tests\EventLoop\Timer;
-
-use React\EventLoop\LibEvLoop;
-
-class LibEvTimerTest extends AbstractTimerTest
-{
-    public function createLoop()
-    {
-        if (!class_exists('libev\EventLoop')) {
-            $this->markTestSkipped('libev tests skipped because ext-libev is not installed.');
-        }
-
-        return new LibEvLoop();
-    }
-}
diff --git a/tests/Timer/LibEventTimerTest.php b/tests/Timer/LibEventTimerTest.php
deleted file mode 100644
index 3db20350..00000000
--- a/tests/Timer/LibEventTimerTest.php
+++ /dev/null
@@ -1,17 +0,0 @@
-<?php
-
-namespace React\Tests\EventLoop\Timer;
-
-use React\EventLoop\LibEventLoop;
-
-class LibEventTimerTest extends AbstractTimerTest
-{
-    public function createLoop()
-    {
-        if (!function_exists('event_base_new')) {
-            $this->markTestSkipped('libevent tests skipped because ext-libevent is not installed.');
-        }
-
-        return new LibEventLoop();
-    }
-}
diff --git a/tests/Timer/TimersTest.php b/tests/Timer/TimersTest.php
index 0ca87e16..e7681c96 100644
--- a/tests/Timer/TimersTest.php
+++ b/tests/Timer/TimersTest.php
@@ -10,20 +10,31 @@ class TimersTest extends TestCase
 {
     public function testBlockedTimer()
     {
-        $loop = $this
-            ->getMockBuilder('React\EventLoop\LoopInterface')
-            ->getMock();
-        
         $timers = new Timers();
         $timers->tick();
-        
+
         // simulate a bunch of processing on stream events,
         // part of which schedules a future timer...
         sleep(1);
-        $timers->add(new Timer($loop, 0.5, function () {
+        $timers->add(new Timer(0.5, function () {
             $this->fail("Timer shouldn't be called");
         }));
 
         $timers->tick();
+
+        $this->assertTrue(true);
+    }
+
+    public function testContains()
+    {
+        $timers = new Timers();
+
+        $timer1 = new Timer(0.1, function () {});
+        $timer2 = new Timer(0.1, function () {});
+
+        $timers->add($timer1);
+
+        self::assertTrue($timers->contains($timer1));
+        self::assertFalse($timers->contains($timer2));
     }
 }
diff --git a/tests/bin/01-ticks-loop-class.php b/tests/bin/01-ticks-loop-class.php
new file mode 100644
index 00000000..5d499f92
--- /dev/null
+++ b/tests/bin/01-ticks-loop-class.php
@@ -0,0 +1,14 @@
+<?php
+
+use React\EventLoop\Loop;
+
+// autoload for local project development or project installed as dependency for reactphp/reactphp
+(@include __DIR__ . '/../../vendor/autoload.php') || require __DIR__ . '/../../../../autoload.php';
+
+Loop::futureTick(function () {
+    echo 'b';
+});
+Loop::futureTick(function () {
+    echo 'c';
+});
+echo 'a';
diff --git a/tests/bin/02-ticks-loop-instance.php b/tests/bin/02-ticks-loop-instance.php
new file mode 100644
index 00000000..5aeead84
--- /dev/null
+++ b/tests/bin/02-ticks-loop-instance.php
@@ -0,0 +1,20 @@
+<?php
+
+use React\EventLoop\Loop;
+
+// autoload for local project development or project installed as dependency for reactphp/reactphp
+(@include __DIR__ . '/../../vendor/autoload.php') || require __DIR__ . '/../../../../autoload.php';
+
+$loop = Loop::get();
+
+$loop->futureTick(function () {
+    echo 'b';
+});
+
+$loop->futureTick(function () {
+    echo 'c';
+});
+
+echo 'a';
+
+$loop->run();
diff --git a/tests/bin/03-ticks-loop-stop.php b/tests/bin/03-ticks-loop-stop.php
new file mode 100644
index 00000000..87317563
--- /dev/null
+++ b/tests/bin/03-ticks-loop-stop.php
@@ -0,0 +1,24 @@
+<?php
+
+use React\EventLoop\Loop;
+
+// autoload for local project development or project installed as dependency for reactphp/reactphp
+(@include __DIR__ . '/../../vendor/autoload.php') || require __DIR__ . '/../../../../autoload.php';
+
+$loop = Loop::get();
+
+$loop->futureTick(function () use ($loop) {
+    echo 'b';
+
+    $loop->stop();
+
+    $loop->futureTick(function () {
+        echo 'never';
+    });
+});
+
+echo 'a';
+
+$loop->run();
+
+echo 'c';
diff --git a/tests/bin/11-uncaught.php b/tests/bin/11-uncaught.php
new file mode 100644
index 00000000..c5bf8c70
--- /dev/null
+++ b/tests/bin/11-uncaught.php
@@ -0,0 +1,12 @@
+<?php
+
+use React\EventLoop\Loop;
+
+// autoload for local project development or project installed as dependency for reactphp/reactphp
+(@include __DIR__ . '/../../vendor/autoload.php') || require __DIR__ . '/../../../../autoload.php';
+
+Loop::addTimer(10.0, function () {
+    echo 'never';
+});
+
+throw new RuntimeException();
diff --git a/tests/bin/12-undefined.php b/tests/bin/12-undefined.php
new file mode 100644
index 00000000..c45cc0f4
--- /dev/null
+++ b/tests/bin/12-undefined.php
@@ -0,0 +1,12 @@
+<?php
+
+use React\EventLoop\Loop;
+
+// autoload for local project development or project installed as dependency for reactphp/reactphp
+(@include __DIR__ . '/../../vendor/autoload.php') || require __DIR__ . '/../../../../autoload.php';
+
+Loop::get()->addTimer(10.0, function () {
+    echo 'never';
+});
+
+$undefined->foo('bar');
diff --git a/tests/bin/21-stop.php b/tests/bin/21-stop.php
new file mode 100644
index 00000000..182ee016
--- /dev/null
+++ b/tests/bin/21-stop.php
@@ -0,0 +1,12 @@
+<?php
+
+use React\EventLoop\Loop;
+
+// autoload for local project development or project installed as dependency for reactphp/reactphp
+(@include __DIR__ . '/../../vendor/autoload.php') || require __DIR__ . '/../../../../autoload.php';
+
+Loop::addTimer(10.0, function () {
+    echo 'never';
+});
+
+Loop::stop();
diff --git a/tests/bin/22-stop-uncaught.php b/tests/bin/22-stop-uncaught.php
new file mode 100644
index 00000000..5b6142ed
--- /dev/null
+++ b/tests/bin/22-stop-uncaught.php
@@ -0,0 +1,17 @@
+<?php
+
+use React\EventLoop\Loop;
+
+// autoload for local project development or project installed as dependency for reactphp/reactphp
+(@include __DIR__ . '/../../vendor/autoload.php') || require __DIR__ . '/../../../../autoload.php';
+
+Loop::addTimer(10.0, function () {
+    echo 'never';
+});
+
+set_exception_handler(function (Exception $e) {
+    echo 'Uncaught error occured' . PHP_EOL;
+    Loop::stop();
+});
+
+throw new RuntimeException();
diff --git a/tests/bootstrap.php b/tests/bootstrap.php
deleted file mode 100644
index d97d8b77..00000000
--- a/tests/bootstrap.php
+++ /dev/null
@@ -1,7 +0,0 @@
-<?php
-
-$loader = @include __DIR__ . '/../vendor/autoload.php';
-if (!$loader) {
-    $loader = require __DIR__ . '/../../../../vendor/autoload.php';
-}
-$loader->addPsr4('React\\Tests\\EventLoop\\', __DIR__);
diff --git a/travis-init.sh b/travis-init.sh
deleted file mode 100755
index 07b1d2a8..00000000
--- a/travis-init.sh
+++ /dev/null
@@ -1,40 +0,0 @@
-#!/bin/bash
-set -e
-set -o pipefail
-
-if [[ "$TRAVIS_PHP_VERSION" != "hhvm" &&
-      "$TRAVIS_PHP_VERSION" != "hhvm-nightly" ]]; then
-
-    # install "libevent" (used by 'event' and 'libevent' PHP extensions)
-    sudo apt-get install -y libevent-dev
-
-    # install 'event' PHP extension
-    echo "yes" | pecl install event
-
-    # install 'libevent' PHP extension (does not support php 7)
-    if [[ "$TRAVIS_PHP_VERSION" != "7.0" ]]; then
-        curl http://pecl.php.net/get/libevent-0.1.0.tgz | tar -xz
-        pushd libevent-0.1.0
-        phpize
-       ./configure
-       make
-       make install
-       popd
-       echo "extension=libevent.so" >> "$(php -r 'echo php_ini_loaded_file();')"
-    fi
-
-    # install 'libev' PHP extension (does not support php 7)
-    if [[ "$TRAVIS_PHP_VERSION" != "7.0" ]]; then
-        git clone --recursive https://github.com/m4rw3r/php-libev
-        pushd php-libev
-        phpize
-        ./configure --with-libev
-        make
-        make install
-        popd
-        echo "extension=libev.so" >> "$(php -r 'echo php_ini_loaded_file();')"
-    fi
-
-fi
-
-composer install --dev --prefer-source

<!DOCTYPE html PUBLIC '-//W3C//DTD XHTML 1.0 Transitional//EN' 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd'>
<html xmlns='http://www.w3.org/1999/xhtml'>
<head>
<title>pFad - Phonifier reborn</title>
<meta http-equiv='Content-Type' content='text/html; charset=utf-8' />
</head>
<body>
<h1>Pfad - The Proxy pFad of &#169; 2024 Garber Painting. All rights reserved.</h1>


<!-- Disclaimer -->
<p>Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.</p>
<br>
<p>Alternative Proxies:</p><p><a href="http://rainy.clevelandohioweatherforecast.com/php-proxy/index.php?q=https://github.com/reactphp/event-loop/compare/reactphp:8bde034...reactphp:2a20bf3.diff" target="_blank">Alternative Proxy</a></p><p><a href="http://rainy.clevelandohioweatherforecast.com/pFad/index.php?u=https://github.com/reactphp/event-loop/compare/reactphp:8bde034...reactphp:2a20bf3.diff" target="_blank">pFad Proxy</a></p><p><a href="http://rainy.clevelandohioweatherforecast.com/pFad/v3index.php?u=https://github.com/reactphp/event-loop/compare/reactphp:8bde034...reactphp:2a20bf3.diff" target="_blank">pFad v3 Proxy</a></p><p><a href="http://rainy.clevelandohioweatherforecast.com/pFad/v4index.php?u=https://github.com/reactphp/event-loop/compare/reactphp:8bde034...reactphp:2a20bf3.diff" target="_blank">pFad v4 Proxy</a></p></body>
</html>