diff --git a/.commitlintrc.yml b/.commitlintrc.yml new file mode 100644 index 00000000..3e08fa81 --- /dev/null +++ b/.commitlintrc.yml @@ -0,0 +1,38 @@ +--- +extends: '@commitlint/config-conventional' + +rules: + # See: https://commitlint.js.org/reference/rules.html + # + # Rules are made up by a name and a configuration array. The configuration + # array contains: + # + # * Severity [0..2]: 0 disable rule, 1 warning if violated, or 2 error if + # violated + # * Applicability [always|never]: never inverts the rule + # * Value: value to use for this rule (if applicable) + # + # Run `npx commitlint --print-config` to see the current setting for all + # rules. + # + header-max-length: [2, always, 100] # Header can not exceed 100 chars + + type-case: [2, always, lower-case] # Type must be lower case + type-empty: [2, never] # Type must not be empty + + # Supported conventional commit types + type-enum: [2, always, [build, ci, chore, docs, feat, fix, perf, refactor, revert, style, test]] + + scope-case: [2, always, lower-case] # Scope must be lower case + + # Error if subject is one of these cases (encourages lower-case) + subject-case: [2, never, [sentence-case, start-case, pascal-case, upper-case]] + subject-empty: [2, never] # Subject must not be empty + subject-full-stop: [2, never, "."] # Subject must not end with a period + + body-leading-blank: [2, always] # Body must have a blank line before it + body-max-line-length: [2, always, 100] # Body lines can not exceed 100 chars + + footer-leading-blank: [2, always] # Footer must have a blank line before it + footer-max-line-length: [2, always, 100] # Footer lines can not exceed 100 chars + \ No newline at end of file diff --git a/.github/workflows/enforce_conventional_commits.yml b/.github/workflows/enforce_conventional_commits.yml new file mode 100644 index 00000000..8aaa93f8 --- /dev/null +++ b/.github/workflows/enforce_conventional_commits.yml @@ -0,0 +1,28 @@ +--- +name: Conventional Commits + +permissions: + contents: read + +on: + pull_request: + branches: + - master + +jobs: + commit-lint: + name: Verify Conventional Commits + + # Skip this job if this is a release PR + if: (github.event_name == 'pull_request' && !startsWith(github.event.pull_request.head.ref, 'release-please--')) + + runs-on: ubuntu-latest + + steps: + - name: Checkout + uses: actions/checkout@v4 + with: { fetch-depth: 0 } + + - name: Check Commit Messages + uses: wagoid/commitlint-github-action@v6 + with: { configFile: .commitlintrc.yml } diff --git a/.github/workflows/release.yml b/.github/workflows/release.yml new file mode 100644 index 00000000..eaea43f1 --- /dev/null +++ b/.github/workflows/release.yml @@ -0,0 +1,52 @@ +--- +name: Release Gem + +description: | + This workflow creates a new release on GitHub and publishes the gem to + RubyGems.org. + + The workflow uses the `googleapis/release-please-action` to handle the + release creation process and the `rubygems/release-gem` action to publish + the gem to rubygems.org + +on: + push: + branches: ["master"] + + workflow_dispatch: + +jobs: + release: + runs-on: ubuntu-latest + + environment: + name: RubyGems + url: https://rubygems.org/gems/git + + permissions: + contents: write + pull-requests: write + id-token: write + + steps: + - name: Checkout project + uses: actions/checkout@v4 + + - name: Create release + uses: googleapis/release-please-action@v4 + id: release + with: + token: ${{ secrets.AUTO_RELEASE_TOKEN }} + config-file: release-please-config.json + manifest-file: .release-please-manifest.json + + - name: Setup ruby + uses: ruby/setup-ruby@v1 + if: ${{ steps.release.outputs.release_created }} + with: + bundler-cache: true + ruby-version: ruby + + - name: Push to RubyGems.org + uses: rubygems/release-gem@v1 + if: ${{ steps.release.outputs.release_created }} diff --git a/.gitignore b/.gitignore index 611ed70c..13dcea11 100644 --- a/.gitignore +++ b/.gitignore @@ -8,3 +8,5 @@ doc pkg rdoc Gemfile.lock +node_modules +package-lock.json \ No newline at end of file diff --git a/.husky/commit-msg b/.husky/commit-msg new file mode 100644 index 00000000..70bd3dd2 --- /dev/null +++ b/.husky/commit-msg @@ -0,0 +1 @@ +npx --no-install commitlint --edit "$1" diff --git a/.release-please-manifest.json b/.release-please-manifest.json new file mode 100644 index 00000000..e28eff59 --- /dev/null +++ b/.release-please-manifest.json @@ -0,0 +1,3 @@ +{ + ".": "3.0.2" +} diff --git a/.yardopts b/.yardopts index ce1aff3c..105b79a9 100644 --- a/.yardopts +++ b/.yardopts @@ -7,5 +7,4 @@ README.md CHANGELOG.md CONTRIBUTING.md -RELEASING.md MAINTAINERS.md diff --git a/CHANGELOG.md b/CHANGELOG.md index b31fed33..0fec2948 100644 --- a/CHANGELOG.md +++ b/CHANGELOG.md @@ -5,6 +5,20 @@ # Change Log +## [3.0.2](https://github.com/ruby-git/ruby-git/compare/v3.0.1...v3.0.2) (2025-05-15) + + +### Bug Fixes + +* Trigger the release workflow on a change to 'master' insetad of 'main' ([c8611f1](https://github.com/ruby-git/ruby-git/commit/c8611f1e68e73825fd16bd475752a40b0088d4ae)) + + +### Other Changes + +* Automate continuous delivery workflow ([06480e6](https://github.com/ruby-git/ruby-git/commit/06480e65e2441348230ef10e05cc1c563d0e7ea8)) +* Enforce conventional commit messages with a GitHub action ([1da4c44](https://github.com/ruby-git/ruby-git/commit/1da4c44620a3264d4e837befd3f40416c5d8f1d8)) +* Enforce conventional commit messages with husky and commitlint ([7ebe0f8](https://github.com/ruby-git/ruby-git/commit/7ebe0f8626ecb2f0da023b903b82f7332d8afaf6)) + ## v3.0.1 (2025-05-14) [Full Changelog](https://github.com/ruby-git/ruby-git/compare/v3.0.0..v3.0.1) diff --git a/CONTRIBUTING.md b/CONTRIBUTING.md index 10793a4a..9a7a4e35 100644 --- a/CONTRIBUTING.md +++ b/CONTRIBUTING.md @@ -5,28 +5,28 @@ # Contributing to the git gem -* [Summary](#summary) -* [How to contribute](#how-to-contribute) -* [How to report an issue or request a feature](#how-to-report-an-issue-or-request-a-feature) -* [How to submit a code or documentation change](#how-to-submit-a-code-or-documentation-change) - * [Commit your changes to a fork of `ruby-git`](#commit-your-changes-to-a-fork-of-ruby-git) - * [Create a pull request](#create-a-pull-request) - * [Get your pull request reviewed](#get-your-pull-request-reviewed) -* [Design philosophy](#design-philosophy) - * [Direct mapping to git commands](#direct-mapping-to-git-commands) - * [Parameter naming](#parameter-naming) - * [Output processing](#output-processing) -* [Coding standards](#coding-standards) - * [1 PR = 1 Commit](#1-pr--1-commit) - * [Unit tests](#unit-tests) - * [Continuous integration](#continuous-integration) - * [Documentation](#documentation) -* [Building a specific version of the Git command-line](#building-a-specific-version-of-the-git-command-line) - * [Install pre-requisites](#install-pre-requisites) - * [Obtain Git source code](#obtain-git-source-code) - * [Build git](#build-git) - * [Use the new Git version](#use-the-new-git-version) -* [Licensing](#licensing) +- [Summary](#summary) +- [How to contribute](#how-to-contribute) +- [How to report an issue or request a feature](#how-to-report-an-issue-or-request-a-feature) +- [How to submit a code or documentation change](#how-to-submit-a-code-or-documentation-change) + - [Commit your changes to a fork of `ruby-git`](#commit-your-changes-to-a-fork-of-ruby-git) + - [Create a pull request](#create-a-pull-request) + - [Get your pull request reviewed](#get-your-pull-request-reviewed) +- [Design philosophy](#design-philosophy) + - [Direct mapping to git commands](#direct-mapping-to-git-commands) + - [Parameter naming](#parameter-naming) + - [Output processing](#output-processing) +- [Coding standards](#coding-standards) + - [Commit message guidelines](#commit-message-guidelines) + - [Unit tests](#unit-tests) + - [Continuous integration](#continuous-integration) + - [Documentation](#documentation) +- [Building a specific version of the Git command-line](#building-a-specific-version-of-the-git-command-line) + - [Install pre-requisites](#install-pre-requisites) + - [Obtain Git source code](#obtain-git-source-code) + - [Build git](#build-git) + - [Use the new Git version](#use-the-new-git-version) +- [Licensing](#licensing) ## Summary @@ -153,18 +153,30 @@ behavior. To ensure high-quality contributions, all pull requests must meet the following requirements: -### 1 PR = 1 Commit +### Commit message guidelines -* All commits for a PR must be squashed into a single commit. -* To avoid an extra merge commit, the PR must be able to be merged as [a fast-forward - merge](https://git-scm.com/book/en/v2/Git-Branching-Basic-Branching-and-Merging). -* The easiest way to ensure a fast-forward merge is to rebase your local branch to - the `ruby-git` master branch. +All commit messages must follow the [Conventional Commits +standard](https://www.conventionalcommits.org/en/v1.0.0/). This helps us maintain a +clear and structured commit history, automate versioning, and generate changelogs +effectively. + +To ensure compliance, this project includes: + +- A git commit-msg hook that validates your commit messages before they are accepted. + + To activate the hook, you must have node installed and run `bin/setup` or + `npm install`. + +- A GitHub Actions workflow that will enforce the Conventional Commit standard as + part of the continuous integration pipeline. + + Any commit message that does not conform to the Conventional Commits standard will + cause the workflow to fail and not allow the PR to be merged. ### Unit tests -* All changes must be accompanied by new or modified unit tests. -* The entire test suite must pass when `bundle exec rake default` is run from the +- All changes must be accompanied by new or modified unit tests. +- The entire test suite must pass when `bundle exec rake default` is run from the project's local working copy. While working on specific features, you can run individual test files or a group of diff --git a/RELEASING.md b/RELEASING.md deleted file mode 100644 index ead6293a..00000000 --- a/RELEASING.md +++ /dev/null @@ -1,85 +0,0 @@ - - -# How to release a new git.gem - -Releasing a new version of the `git` gem requires these steps: - -* [Install Prerequisites](#install-prerequisites) -* [Determine the SemVer release type](#determine-the-semver-release-type) -* [Create the release](#create-the-release) -* [Review the CHANGELOG and release PR](#review-the-changelog-and-release-pr) -* [Manually merge the release PR](#manually-merge-the-release-pr) -* [Publish the git gem to RubyGems.org](#publish-the-git-gem-to-rubygemsorg) - -## Install Prerequisites - -The following tools need to be installed in order to create the release: - -* [create_githhub_release](https://github.com/main-branch/create_github_release) is used to create the release -* [git](https://git-scm.com) is used by `create-github-release` to interact with the local and remote repositories -* [gh](https://cli.github.com) is used by `create-github-release` to create the release and PR in GitHub - -On a Mac, these tools can be installed using [gem](https://guides.rubygems.org/rubygems-basics/) and [brew](https://brew.sh): - -```shell -$ gem install create_github_release -... -$ brew install git -... -$ brew install gh -... -$ -``` - -## Determine the SemVer release type - -Determine the SemVer version increment that should be applied for the new release: - -* `major`: when the release includes incompatible API or functional changes. -* `minor`: when the release adds functionality in a backward-compatible manner -* `patch`: when the release includes small user-facing changes that are - backward-compatible and do not introduce new functionality. - -## Create the release - -Create the release using the `create-github-release` command. If the release type -is `major`, the command is: - -```shell -create-github-release major -``` - -Follow the directions given by the `create-github-release` command to finish the -release. Where the instructions given by the command differ than the instructions -below, follow the instructions given by the command. - -## Review the CHANGELOG and release PR - -The `create-github-release` command will output a link to the CHANGELOG and the PR -it created for the release. Review the CHANGELOG and have someone review and approve -the release PR. - -## Manually merge the release PR - -It is important to manually merge the PR so a separate merge commit can be avoided. -Use the commands output by the `create-github-release` which will looks like this -if you are creating a 2.0.0 release: - -```shell -git checkout master -git merge --ff-only release-v2.0.0 -git push -``` - -This will automatically close the release PR. - -## Publish the git gem to RubyGems.org - -Finally, publish the git gem to RubyGems.org using the following command: - -```shell -rake release:rubygem_push -``` diff --git a/Rakefile b/Rakefile index e2d8ef2a..72b93352 100644 --- a/Rakefile +++ b/Rakefile @@ -58,3 +58,10 @@ task :'test:gem' => :install do puts 'Gem Test Succeeded' end + +# Make it so that calling `rake release` just calls `rake release:rubygem_push` to +# avoid creating and pushing a new tag. + +Rake::Task['release'].clear +desc 'Customized release task to avoid creating a new tag' +task release: 'release:rubygem_push' diff --git a/bin/setup b/bin/setup index dce67d86..f16ff654 100755 --- a/bin/setup +++ b/bin/setup @@ -5,4 +5,9 @@ set -vx bundle install -# Do any other automated setup that you need to do here +if [ -x "$(command -v npm)" ]; then + npm install +else + echo "npm is not installed" + echo "Install npm then re-run this script to enable the conventional commit git hook." +fi diff --git a/lib/git/version.rb b/lib/git/version.rb index eb507c85..6831d2c1 100644 --- a/lib/git/version.rb +++ b/lib/git/version.rb @@ -3,5 +3,5 @@ module Git # The current gem version # @return [String] the current gem version. - VERSION='3.0.1' + VERSION='3.0.2' end diff --git a/package.json b/package.json new file mode 100644 index 00000000..2924004f --- /dev/null +++ b/package.json @@ -0,0 +1,10 @@ +{ + "devDependencies": { + "@commitlint/cli": "^19.8.0", + "@commitlint/config-conventional": "^19.8.0", + "husky": "^9.1.7" + }, + "scripts": { + "prepare": "husky" + } +} diff --git a/release-please-config.json b/release-please-config.json new file mode 100644 index 00000000..b0c93860 --- /dev/null +++ b/release-please-config.json @@ -0,0 +1,36 @@ +{ + "bootstrap-sha": "31374263eafea4e23352494ef4f6bea3ce62c1b5", + "packages": { + ".": { + "release-type": "ruby", + "package-name": "git", + "changelog-path": "CHANGELOG.md", + "version-file": "lib/git/version.rb", + "bump-minor-pre-major": true, + "bump-patch-for-minor-pre-major": true, + "draft": false, + "prerelease": false, + "include-component-in-tag": false, + "pull-request-title-pattern": "chore: release v${version}", + "changelog-sections": [ + { "type": "feat", "section": "Features", "hidden": false }, + { "type": "fix", "section": "Bug Fixes", "hidden": false }, + { "type": "build", "section": "Other Changes", "hidden": false }, + { "type": "chore", "section": "Other Changes", "hidden": false }, + { "type": "ci", "section": "Other Changes", "hidden": false }, + { "type": "docs", "section": "Other Changes", "hidden": false }, + { "type": "perf", "section": "Other Changes", "hidden": false }, + { "type": "refactor", "section": "Other Changes", "hidden": false }, + { "type": "revert", "section": "Other Changes", "hidden": false }, + { "type": "style", "section": "Other Changes", "hidden": false }, + { "type": "test", "section": "Other Changes", "hidden": false } + ] + } + }, + "plugins": [ + { + "type": "sentence-case" + } + ], + "$schema": "https://raw.githubusercontent.com/googleapis/release-please/main/schemas/config.json" +} pFad - Phonifier reborn

Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.

Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.


Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy