SparkFun License Information

SparkFun uses two different licenses for our files — one for hardware and one for code.

Hardware

**SparkFun hardware is released under [Creative Commons Share-alike 4.0 International](http://creativecommons.org/licenses/by-sa/4.0/).**

Note: This is a human-readable summary of (and not a substitute for) the [license](http://creativecommons.org/licenses/by-sa/4.0/legalcode).

You are free to:

Share — copy and redistribute the material in any medium or format

Adapt — remix, transform, and build upon the material

for any purpose, even commercially.

The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.

No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

Code

**SparkFun code, firmware, and software is released under the MIT License(http://opensource.org/licenses/MIT).**

The MIT License (MIT)

Copyright (c) 2015 SparkFun Electronics

Permission is hereby granted, free of charge, to any person obtaining a copy

of this software and associated documentation files (the "Software"), to deal

in the Software without restriction, including without limitation the rights

to use, copy, modify, merge, publish, distribute, sublicense, and/or sell

copies of the Software, and to permit persons to whom the Software is

furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all

copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE

AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

SOFTWARE.

Tiny AVR Programmer


[*Tiny AVR Programmer (PGM-11801)*](https://www.sparkfun.com/products/11801)

This was a collaboration with David Mellis and the MIT High Low Tech lab.

See [Programming an ATtiny with Arduino 1.0](http://hlt.media.mit.edu/?p=1695)

and [Using the TinyProgrammer](http://hlt.media.mit.edu/?p=1801) for more drivers and additional information.

Repository Contents

* **/Drivers** - Signed drivers for the Tiny AVR Programmer

* **/Hardware** - Eagle design files (.brd, .sch)

* **/Production** - Production panel files (.brd)

Documentation

* **[Hookup Guide](https://learn.sparkfun.com/tutorials/tiny-avr-programmer-hookup-guide/)** - Basic hookup guide for the Programmer.

* **[SparkFun Fritzing repo](https://github.com/sparkfun/Fritzing_Parts)** - Fritzing diagrams for SparkFun products.

* **[SparkFun 3D Model repo](https://github.com/sparkfun/3D_Models)** - 3D models of SparkFun products.

License Information

This product is _**open source**_!

Please review the LICENSE.md file for license information.

If you have any questions or concerns on licensing, please contact techsupport@sparkfun.com.

Distributed as-is; no warranty is given.

- Your friends at SparkFun.