ports/rp2: Update Thing Plus RP2350 radio definitions

sfe-SparkFro · sfe-SparkFro · commit 6f032bec00f7 · 2025-01-14T16:35:06.000-07:00
No longer depends on micropython#16057
diff --git a/ports/rp2/boards/SPARKFUN_THINGPLUS_RP2350/mpconfigboard.cmake b/ports/rp2/boards/SPARKFUN_THINGPLUS_RP2350/mpconfigboard.cmake
@@ -3,7 +3,13 @@
 set(PICO_BOARD "sparkfun_thingplus_rp2350")
 set(PICO_PLATFORM "rp2350")
 
-include(enable_cyw43.cmake)
+set(MICROPY_PY_LWIP ON)
+set(MICROPY_PY_NETWORK_CYW43 ON)
+
+# Bluetooth
+set(MICROPY_PY_BLUETOOTH ON)
+set(MICROPY_BLUETOOTH_BTSTACK ON)
+set(MICROPY_PY_BLUETOOTH_CYW43 ON)
 
 # Board specific version of the frozen manifest
-set(MICROPY_FROZEN_MANIFEST ${MICROPY_BOARD_DIR}/manifest.py)
+set(MICROPY_FROZEN_MANIFEST ${MICROPY_BOARD_DIR}/manifest.py)
diff --git a/ports/rp2/boards/SPARKFUN_THINGPLUS_RP2350/mpconfigboard.h b/ports/rp2/boards/SPARKFUN_THINGPLUS_RP2350/mpconfigboard.h
@@ -2,8 +2,21 @@
 #define MICROPY_HW_BOARD_NAME          "SparkFun Thing Plus RP2350"
 #define MICROPY_HW_FLASH_STORAGE_BYTES (14 * 1024 * 1024)
 
+// Enable networking.
+#define MICROPY_PY_NETWORK 1
 #define MICROPY_PY_NETWORK_HOSTNAME_DEFAULT "ThingPlusRP2350"
 
+// CYW43 driver configuration.
+#define CYW43_USE_SPI (1)
+#define CYW43_LWIP (1)
+#define CYW43_GPIO (1)
+#define CYW43_SPI_PIO (1)
+
+#define MICROPY_HW_PIN_EXT_COUNT    CYW43_WL_GPIO_COUNT
+
+int mp_hal_is_pin_reserved(int n);
+#define MICROPY_HW_PIN_RESERVED(i) mp_hal_is_pin_reserved(i)
+
 #define MICROPY_HW_USB_VID (0x1B4F)
 #define MICROPY_HW_USB_PID (0x0038)
 
@@ -33,5 +46,3 @@
 
 #define MICROPY_HW_PSRAM_CS_PIN (8)
 #define MICROPY_HW_ENABLE_PSRAM (1)
-
-#include "enable_cyw43.h"
