Skip to content

Commit 3874dac

Browse files
Oliv4945Oliv4945
committed
Add RAK3172 module
1 parent 31e562d commit 3874dac

File tree

4 files changed

+304
-0
lines changed

4 files changed

+304
-0
lines changed

‎README.md

Lines changed: 1 addition & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -749,6 +749,7 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d
749749
| :green_heart: | STM32L073RZ | [AcSIP S76S](https://www.acsip.com.tw) | *2.3.0* | |
750750
| :green_heart: | STM32F072C8<br>STM32F072CB | [Elektor LoRa Node](https://github.com/ElektorLabs/180516-Elektor_LoRa_Node) | *1.8.0* | [More info](https://www.elektormagazine.com/labs/lorawan-node-experimental-platform) |
751751
| :yellow_heart: | STM32WLE5JC | [LoRa-E5 mini](https://wiki.seeedstudio.com/LoRa_E5_mini/) | **2.6.0** | |
752+
| :yellow_heart: | STM32WLE5CC | [RAK3172 Module](https://github.com/RAKWireless/rakwireless-docs/tree/master/docs/Product-Categories/WisDuo/RAK3172-Module) | **2.6.0** | |
752753
| :green_heart: | STM32L151CB | [RAK811 LoRa Tracker](https://www.rakwireless.com/en/) | *1.4.0* | [Wiki](https://github.com/stm32duino/Arduino_Core_STM32/wiki/Connectivities#lora) |
753754
| :green_heart: | STM32L051C8 | [RHF76-052](https://lora-alliance.org/lora_products/rhf76-052/) | *1.7.0* | Basic support |
754755

‎boards.txt

Lines changed: 12 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -10482,6 +10482,18 @@ LoRa.menu.pnum.LORA_E5_MINI.build.peripheral_pins=-DCUSTOM_PERIPHERAL_PINS
1048210482
LoRa.menu.pnum.LORA_E5_MINI.build.variant_h=variant_LORA_E5_MINI.h
1048310483
LoRa.menu.pnum.LORA_E5_MINI.build.cmsis_lib_gcc=arm_cortexM4l_math
1048410484

10485+
# RAK3172 module
10486+
LoRa.menu.pnum.RAK3172_MODULE=RAK3172 Module
10487+
LoRa.menu.pnum.RAK3172_MODULE.upload.maximum_size=262144
10488+
LoRa.menu.pnum.RAK3172_MODULE.upload.maximum_data_size=65536
10489+
LoRa.menu.pnum.RAK3172_MODULE.build.mcu=cortex-m4
10490+
LoRa.menu.pnum.RAK3172_MODULE.build.board=RAK3172_MODULE
10491+
LoRa.menu.pnum.RAK3172_MODULE.build.series=STM32WLxx
10492+
LoRa.menu.pnum.RAK3172_MODULE.build.product_line=STM32WLE5xx
10493+
LoRa.menu.pnum.RAK3172_MODULE.build.variant=STM32WLxx/WL54CCU_WL55CCU_WLE4C(8-B-C)U_WLE5C(8-B-C)U
10494+
LoRa.menu.pnum.RAK3172_MODULE.build.variant_h=variant_RAK3172_MODULE.h
10495+
LoRa.menu.pnum.RAK3172_MODULE.build.cmsis_lib_gcc=arm_cortexM4l_math
10496+
1048510497
# RAK811_TRACKER board
1048610498
LoRa.menu.pnum.RAK811_TRACKER=RAK811 LoRa Tracker (16kb RAM)
1048710499
LoRa.menu.pnum.RAK811_TRACKER.upload.maximum_size=131072

‎variants/STM32WLxx/WL54CCU_WL55CCU_WLE4C(8-B-C)U_WLE5C(8-B-C)U/variant_RAK3172_MODULE.cpp

Lines changed: 107 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,107 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2020, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
#if defined(ARDUINO_RAK3172_MODULE)
14+
#include "pins_arduino.h"
15+
16+
// Digital PinName array
17+
const PinName digitalPin[] = {
18+
PA_0, // D0
19+
PA_1, // D1
20+
PA_2, // D2 - USART2/LPUART1 TX
21+
PA_3, // D3 - USART2/LPUART1 RX
22+
PA_4, // D4 - SPI_NSS
23+
PA_5, // D5 - SPI_SCK
24+
PA_6, // D6 - SPI_MISO
25+
PA_7, // D7 - SPI_MOSI
26+
PA_8, // D8
27+
PA_9, // D9
28+
PA_10, // D10/A3
29+
PA_11, // D11/A7 - I2C_SDA
30+
PA_12, // D12/A8 - I2C_SCL
31+
PA_13, // D13/A5 - SWDIO
32+
PA_14, // D14/A6 - SWCLK
33+
PA_15, // D15/A4
34+
PB_2, // D16/A2
35+
PB_3, // D17/A0
36+
PB_4, // D18/A1
37+
PB_5, // D19
38+
PB_6, // D20 - USART1_TX
39+
PB_7, // D21 - USAR1_RX
40+
PB_8, // D22
41+
PB_12, // D23
42+
PC_13, // D24
43+
PH_3 // D25 - BOOT0
44+
};
45+
46+
// Analog (Ax) pin number array
47+
const uint32_t analogInputPin[] = {
48+
17, // A0, PB3
49+
18, // A1, PB4
50+
16, // A2, PB2
51+
10, // A3, PA10
52+
15, // A4, PA15
53+
13, // A5, PA13
54+
14, // A6, PA14
55+
11, // A7, PA11
56+
12 // A8, PA12
57+
};
58+
59+
// ----------------------------------------------------------------------------
60+
#ifdef __cplusplus
61+
extern "C" {
62+
#endif
63+
64+
/**
65+
* @brief System Clock Configuration
66+
* @param None
67+
* @retval None
68+
*/
69+
WEAK void SystemClock_Config(void)
70+
{
71+
RCC_OscInitTypeDef RCC_OscInitStruct = {};
72+
RCC_ClkInitTypeDef RCC_ClkInitStruct = {};
73+
74+
/** Configure the main internal regulator output voltage
75+
*/
76+
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
77+
/** Initializes the CPU, AHB and APB busses clocks
78+
*/
79+
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
80+
RCC_OscInitStruct.MSIState = RCC_MSI_ON;
81+
RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT;
82+
RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_11;
83+
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
84+
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
85+
Error_Handler();
86+
}
87+
/** Configure the SYSCLKSource, HCLK, PCLK1 and PCLK2 clocks dividers
88+
*/
89+
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK3 | RCC_CLOCKTYPE_HCLK
90+
| RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1
91+
| RCC_CLOCKTYPE_PCLK2;
92+
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
93+
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
94+
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
95+
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
96+
RCC_ClkInitStruct.AHBCLK3Divider = RCC_SYSCLK_DIV1;
97+
98+
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) {
99+
Error_Handler();
100+
}
101+
}
102+
103+
#ifdef __cplusplus
104+
}
105+
#endif
106+
107+
#endif /* ARDUINO_RAK3172_MODULE */

‎variants/STM32WLxx/WL54CCU_WL55CCU_WLE4C(8-B-C)U_WLE5C(8-B-C)U/variant_RAK3172_MODULE.h

Lines changed: 184 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,184 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2020, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
#pragma once
14+
15+
/*----------------------------------------------------------------------------
16+
* STM32 pins number
17+
*----------------------------------------------------------------------------*/
18+
#define PA0 0
19+
#define PA1 1
20+
#define PA2 2
21+
#define PA3 3
22+
#define PA4 4
23+
#define PA5 5
24+
#define PA6 6
25+
#define PA7 7
26+
#define PA8 8
27+
#define PA9 9
28+
#define PA10 PIN_A3
29+
#define PA11 PIN_A7
30+
#define PA12 PIN_A8
31+
#define PA13 PIN_A5
32+
#define PA14 PIN_A6
33+
#define PA15 PIN_A4
34+
#define PB2 PIN_A2
35+
#define PB3 PIN_A0
36+
#define PB4 PIN_A1
37+
#define PB5 19
38+
#define PB6 20
39+
#define PB7 21
40+
#define PB8 22
41+
#define PB12 23
42+
#define PC13 24
43+
#define PH3 25
44+
45+
// Not available
46+
// PB0
47+
// PC14
48+
// PC15
49+
50+
// Alternate pins number
51+
#define PA1_ALT1 (PA1 | ALT1)
52+
#define PA2_ALT1 (PA2 | ALT1)
53+
#define PA3_ALT1 (PA3 | ALT1)
54+
#define PA4_ALT1 (PA4 | ALT1)
55+
#define PA5_ALT1 (PA5 | ALT1)
56+
#define PA6_ALT1 (PA6 | ALT1)
57+
#define PA7_ALT1 (PA7 | ALT1)
58+
#define PB8_ALT1 (PB8 | ALT1)
59+
60+
#define NUM_DIGITAL_PINS 26
61+
#define NUM_ANALOG_INPUTS 9
62+
63+
// On-board LED pin number
64+
#ifndef LED_BUILTIN
65+
#define LED_BUILTIN PNUM_NOT_DEFINED
66+
#endif
67+
68+
// On-board user button
69+
#ifndef USER_BTN
70+
#define USER_BTN PNUM_NOT_DEFINED
71+
#endif
72+
73+
// SPI definitions
74+
#ifndef PIN_SPI_SS
75+
#define PIN_SPI_SS PA4
76+
#endif
77+
#ifndef PIN_SPI_SS1
78+
#define PIN_SPI_SS1 PB2
79+
#endif
80+
#ifndef PIN_SPI_SS2
81+
#define PIN_SPI_SS2 PNUM_NOT_DEFINED
82+
#endif
83+
#ifndef PIN_SPI_SS3
84+
#define PIN_SPI_SS3 PNUM_NOT_DEFINED
85+
#endif
86+
#ifndef PIN_SPI_MOSI
87+
#define PIN_SPI_MOSI PA7
88+
#endif
89+
#ifndef PIN_SPI_MISOSPI1_SCK
90+
#define PIN_SPI_MISO PA6
91+
#endif
92+
#ifndef PIN_SPI_SCK
93+
#define PIN_SPI_SCK PA5
94+
#endif
95+
96+
// I2C definitions
97+
#ifndef PIN_WIRE_SDA
98+
#define PIN_WIRE_SDA PA11
99+
#endif
100+
#ifndef PIN_WIRE_SCL
101+
#define PIN_WIRE_SCL PA12
102+
#endif
103+
104+
// Timer Definitions
105+
// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin
106+
#ifndef TIMER_TONE
107+
#define TIMER_TONE TIM16
108+
#endif
109+
#ifndef TIMER_SERVO
110+
#define TIMER_SERVO TIM17
111+
#endif
112+
113+
// UART Definitions
114+
#ifndef SERIAL_UART_INSTANCE
115+
#define SERIAL_UART_INSTANCE 101
116+
#endif
117+
118+
// Default pin used for generic 'Serial' instance
119+
// Mandatory for Firmata
120+
#ifndef PIN_SERIAL_RX
121+
#define PIN_SERIAL_RX PA3
122+
#endif
123+
#ifndef PIN_SERIAL_TX
124+
#define PIN_SERIAL_TX PA2
125+
#endif
126+
127+
// Alias
128+
#ifndef DEBUG_SUBGHZSPI_MOSI
129+
#define DEBUG_SUBGHZSPI_MOSI PA7_ALT1
130+
#endif
131+
#ifndef DEBUG_SUBGHZSPI_MISO
132+
#define DEBUG_SUBGHZSPI_MISO PA6_ALT1
133+
#endif
134+
#ifndef DEBUG_SUBGHZSPI_SCLK
135+
#define DEBUG_SUBGHZSPI_SCLK PA5_ALT1
136+
#endif
137+
#ifndef DEBUG_SUBGHZSPI_SS
138+
#define DEBUG_SUBGHZSPI_SS PA4_ALT1
139+
#endif
140+
141+
// Extra HAL modules
142+
#if !defined(HAL_DAC_MODULE_DISABLED)
143+
#define HAL_DAC_MODULE_ENABLED
144+
#endif
145+
146+
// LoRaWAN definitions
147+
#define LORAWAN_BOARD_HAS_TCXO 0U
148+
#define LORAWAN_BOARD_HAS_DCDC 1U
149+
#define LORAWAN_TX_CONFIG RBI_CONF_RFO_HP
150+
151+
#define LORAWAN_RFSWITCH_PINS PB8, PC13
152+
#define LORAWAN_RFSWITCH_PIN_COUNT 2
153+
#define LORAWAN_RFSWITCH_OFF_VALUES LOW, LOW
154+
#define LORAWAN_RFSWITCH_RX_VALUES HIGH, LOW
155+
#define LORAWAN_RFSWITCH_RFO_LP_VALUES LOW, HIGH
156+
#define LORAWAN_RFSWITCH_RFO_HP_VALUES LOW, HIGH
157+
158+
/*----------------------------------------------------------------------------
159+
* Arduino objects - C++ only
160+
*----------------------------------------------------------------------------*/
161+
162+
#ifdef __cplusplus
163+
// These serial port names are intended to allow libraries and architecture-neutral
164+
// sketches to automatically default to the correct port name for a particular type
165+
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
166+
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
167+
//
168+
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
169+
//
170+
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
171+
//
172+
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
173+
//
174+
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
175+
//
176+
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
177+
// pins are NOT connected to anything by default.
178+
#ifndef SERIAL_PORT_MONITOR
179+
#define SERIAL_PORT_MONITOR Serial
180+
#endif
181+
#ifndef SERIAL_PORT_HARDWARE
182+
#define SERIAL_PORT_HARDWARE Serial
183+
#endif
184+
#endif

0 commit comments

Comments
 (0)
pFad - Phonifier reborn

Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.

Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.


Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy