Skip to content

Commit aed76aa

Browse files
fpistmfpistm
committed
variant(WL): add LoRa-E5 mini
Signed-off-by: Frederic Pillon <frederic.pillon@st.com>
1 parent 6e3f991 commit aed76aa

File tree

5 files changed

+577
-0
lines changed

5 files changed

+577
-0
lines changed

‎README.md

Lines changed: 1 addition & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -748,6 +748,7 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d
748748
| :----: | :-------: | ---- | :-----: | :---- |
749749
| :green_heart: | STM32L073RZ | [AcSIP S76S](https://www.acsip.com.tw) | *2.3.0* | |
750750
| :green_heart: | STM32F072C8<br>STM32F072CB | [Elektor LoRa Node](https://github.com/ElektorLabs/180516-Elektor_LoRa_Node) | *1.8.0* | [More info](https://www.elektormagazine.com/labs/lorawan-node-experimental-platform) |
751+
| :yellow_heart: | STM32WLE5JC | [LoRa-E5 mini](https://wiki.seeedstudio.com/LoRa_E5_mini/) | **2.6.0** | |
751752
| :green_heart: | STM32L151CB | [RAK811 LoRa Tracker](https://www.rakwireless.com/en/) | *1.4.0* | [Wiki](https://github.com/stm32duino/Arduino_Core_STM32/wiki/Connectivities#lora) |
752753
| :green_heart: | STM32L051C8 | [RHF76-052](https://lora-alliance.org/lora_products/rhf76-052/) | *1.7.0* | Basic support |
753754

‎boards.txt

Lines changed: 14 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -10465,6 +10465,20 @@ LoRa.menu.pnum.ACSIP_S76S.build.peripheral_pins=-DCUSTOM_PERIPHERAL_PINS
1046510465
LoRa.menu.pnum.ACSIP_S76S.build.cmsis_lib_gcc=arm_cortexM0l_math
1046610466
LoRa.menu.pnum.ACSIP_S76S.build.st_extra_flags=-D{build.product_line} {build.enable_usb} {build.xSerial} -D__CORTEX_SC=0
1046710467

10468+
# LORA_E5_MINI board
10469+
LoRa.menu.pnum.LORA_E5_MINI=LoRa-E5 mini
10470+
LoRa.menu.pnum.LORA_E5_MINI.upload.maximum_size=262144
10471+
LoRa.menu.pnum.LORA_E5_MINI.upload.maximum_data_size=65536
10472+
LoRa.menu.pnum.LORA_E5_MINI.build.mcu=cortex-m4
10473+
LoRa.menu.pnum.LORA_E5_MINI.build.board=LORA_E5_MINI
10474+
LoRa.menu.pnum.LORA_E5_MINI.build.series=STM32WLxx
10475+
LoRa.menu.pnum.LORA_E5_MINI.build.product_line=STM32WLE5xx
10476+
LoRa.menu.pnum.LORA_E5_MINI.build.variant=STM32WLxx/WL54JCI_WL55JCI_WLE4J(8-B-C)I_WLE5J(8-B-C)I
10477+
LoRa.menu.pnum.LORA_E5_MINI.build.peripheral_pins=-DCUSTOM_PERIPHERAL_PINS
10478+
LoRa.menu.pnum.LORA_E5_MINI.build.variant_h=variant_LORA_E5_MINI.h
10479+
LoRa.menu.pnum.LORA_E5_MINI.build.cmsis_lib_gcc=arm_cortexM4l_math
10480+
10481+
1046810482
# RAK811_TRACKER board
1046910483
LoRa.menu.pnum.RAK811_TRACKER=RAK811 LoRa Tracker (16kb RAM)
1047010484
LoRa.menu.pnum.RAK811_TRACKER.upload.maximum_size=131072

‎variants/STM32WLxx/WL54JCI_WL55JCI_WLE4J(8-B-C)I_WLE5J(8-B-C)I/PeripheralPins_LORA_E5_MINI.c

Lines changed: 244 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,244 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2023, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
/*
14+
* Automatically generated from STM32WL54JCIx.xml, STM32WL55JCIx.xml
15+
* STM32WLE4J8Ix.xml, STM32WLE4JBIx.xml
16+
* STM32WLE4JCIx.xml, STM32WLE5J8Ix.xml
17+
* STM32WLE5JBIx.xml, STM32WLE5JCIx.xml
18+
* CubeMX DB release 6.0.80
19+
*/
20+
#if defined(ARDUINO_LORA_E5_MINI)
21+
#include "Arduino.h"
22+
#include "PeripheralPins.h"
23+
24+
/* =====
25+
* Notes:
26+
* - The pins mentioned Px_y_ALTz are alternative possibilities which use other
27+
* HW peripheral instances. You can use them the same way as any other "normal"
28+
* pin (i.e. analogWrite(PA7_ALT1, 128);).
29+
*
30+
* - Commented lines are alternative possibilities which are not used per default.
31+
* If you change them, you will have to know what you do
32+
* =====
33+
*/
34+
35+
//*** ADC ***
36+
37+
#ifdef HAL_ADC_MODULE_ENABLED
38+
WEAK const PinMap PinMap_ADC[] = {
39+
{PA_10, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6
40+
// {PA_11, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7
41+
// {PA_12, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8
42+
{PA_13, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9
43+
{PA_14, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC_IN10
44+
{PA_15, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC_IN11
45+
// {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5
46+
// {PB_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4
47+
{PB_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2
48+
{PB_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3
49+
{PB_13, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0
50+
{PB_14, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1
51+
{NC, NP, 0}
52+
};
53+
#endif
54+
55+
//*** DAC ***
56+
57+
#ifdef HAL_DAC_MODULE_ENABLED
58+
WEAK const PinMap PinMap_DAC[] = {
59+
{PA_10, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1
60+
{NC, NP, 0}
61+
};
62+
#endif
63+
64+
//*** I2C ***
65+
66+
#ifdef HAL_I2C_MODULE_ENABLED
67+
WEAK const PinMap PinMap_I2C_SDA[] = {
68+
{PA_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
69+
// {PA_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
70+
{PA_15, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
71+
{PB_4, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
72+
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
73+
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
74+
// {PB_11, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
75+
{PB_14, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
76+
{PC_1, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
77+
{NC, NP, 0}
78+
};
79+
#endif
80+
81+
#ifdef HAL_I2C_MODULE_ENABLED
82+
WEAK const PinMap PinMap_I2C_SCL[] = {
83+
// {PA_7, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
84+
{PA_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
85+
// {PA_12, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
86+
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
87+
// {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
88+
{PB_10, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
89+
{PB_13, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
90+
{PB_15, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
91+
{PC_0, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
92+
{NC, NP, 0}
93+
};
94+
#endif
95+
96+
//*** TIM ***
97+
98+
#ifdef HAL_TIM_MODULE_ENABLED
99+
WEAK const PinMap PinMap_TIM[] = {
100+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
101+
// {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
102+
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
103+
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
104+
// {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
105+
// {PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1
106+
// {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
107+
// {PA_7_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)}, // TIM17_CH1
108+
// {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
109+
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
110+
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
111+
// {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
112+
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
113+
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
114+
{PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 1)}, // TIM16_CH1N
115+
{PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 1)}, // TIM17_CH1N
116+
// {PB_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
117+
// {PB_8_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1
118+
{PB_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
119+
{PB_9_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)}, // TIM17_CH1
120+
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
121+
// {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
122+
{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
123+
{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
124+
{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
125+
{NC, NP, 0}
126+
};
127+
#endif
128+
129+
//*** UART ***
130+
131+
#ifdef HAL_UART_MODULE_ENABLED
132+
WEAK const PinMap PinMap_UART_TX[] = {
133+
{PA_2, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
134+
{PA_2_ALT1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
135+
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
136+
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
137+
// {PB_11, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
138+
{PC_1, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
139+
{NC, NP, 0}
140+
};
141+
#endif
142+
143+
#ifdef HAL_UART_MODULE_ENABLED
144+
WEAK const PinMap PinMap_UART_RX[] = {
145+
{PA_3, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
146+
{PA_3_ALT1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
147+
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
148+
{PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
149+
{PB_10, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
150+
{PC_0, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
151+
{NC, NP, 0}
152+
};
153+
#endif
154+
155+
#ifdef HAL_UART_MODULE_ENABLED
156+
WEAK const PinMap PinMap_UART_RTS[] = {
157+
// {PA_1, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
158+
// {PA_1_ALT1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
159+
// {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
160+
// {PB_1, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
161+
{PB_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
162+
// {PB_12, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
163+
{NC, NP, 0}
164+
};
165+
#endif
166+
167+
#ifdef HAL_UART_MODULE_ENABLED
168+
WEAK const PinMap PinMap_UART_CTS[] = {
169+
// {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
170+
// {PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
171+
// {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
172+
{PB_4, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
173+
// {PB_13, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
174+
{NC, NP, 0}
175+
};
176+
#endif
177+
178+
//*** SPI ***
179+
180+
#ifdef HAL_SPI_MODULE_ENABLED
181+
WEAK const PinMap PinMap_SPI_MOSI[] = {
182+
// {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
183+
{PA_7, SUBGHZSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF13_DEBUG_SUBGHZSPI)},
184+
{PA_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
185+
// {PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
186+
// {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
187+
{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
188+
{PC_1, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI2)},
189+
// {PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
190+
{NC, NP, 0}
191+
};
192+
#endif
193+
194+
#ifdef HAL_SPI_MODULE_ENABLED
195+
WEAK const PinMap PinMap_SPI_MISO[] = {
196+
// {PA_5, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI2)},
197+
// {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
198+
{PA_6, SUBGHZSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF13_DEBUG_SUBGHZSPI)},
199+
// {PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
200+
{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
201+
{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
202+
// {PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
203+
{NC, NP, 0}
204+
};
205+
#endif
206+
207+
#ifdef HAL_SPI_MODULE_ENABLED
208+
WEAK const PinMap PinMap_SPI_SCLK[] = {
209+
// {PA_1, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
210+
// {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
211+
{PA_5, SUBGHZSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF13_DEBUG_SUBGHZSPI)},
212+
// {PA_8, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
213+
{PA_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
214+
{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
215+
{PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
216+
{PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
217+
{NC, NP, 0}
218+
};
219+
#endif
220+
221+
#ifdef HAL_SPI_MODULE_ENABLED
222+
WEAK const PinMap PinMap_SPI_SSEL[] = {
223+
// {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
224+
{PA_4, SUBGHZSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF13_DEBUG_SUBGHZSPI)},
225+
{PA_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI2)},
226+
{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
227+
// {PB_2, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
228+
{PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
229+
// {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
230+
{NC, NP, 0}
231+
};
232+
#endif
233+
234+
//*** No CAN ***
235+
236+
//*** No ETHERNET ***
237+
238+
//*** No QUADSPI ***
239+
240+
//*** No USB ***
241+
242+
//*** No SD ***
243+
244+
#endif /* ARDUINO_LORA_E5_MINI */

‎variants/STM32WLxx/WL54JCI_WL55JCI_WLE4J(8-B-C)I_WLE5J(8-B-C)I/variant_LORA_E5_MINI.cpp

Lines changed: 112 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,112 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2023, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
#if defined(ARDUINO_LORA_E5_MINI)
14+
#include "pins_arduino.h"
15+
16+
// Digital PinName array
17+
const PinName digitalPin[] = {
18+
PA_0, // D0
19+
PA_2, // D1
20+
PA_3, // D2
21+
PC_1, // D3
22+
PC_0, // D4
23+
PB_6, // D5
24+
PB_7, // D6
25+
PA_15, // D7/A0
26+
PB_15, // D8
27+
PA_9, // D9
28+
PB_10, // D10
29+
PB_13, // D11/A1
30+
PB_9, // D12
31+
PB_14, // D13/A2
32+
PA_10, // D14/A5
33+
PA_14, // D15/A6
34+
PA_13, // D16/A7
35+
PB_3, // D17/A3
36+
PB_4, // D18/A4
37+
PB_5, // D19
38+
PA_4, // D20
39+
PA_5, // D21
40+
PB_0, // D22
41+
PC_15, // D23
42+
PC_14, // D24
43+
PA_7, // D25
44+
PA_6 // D26
45+
46+
};
47+
48+
// Analog (Ax) pin number array
49+
const uint32_t analogInputPin[] = {
50+
7, // A0, PA15
51+
11, // A1, PB13
52+
13, // A2, PB14
53+
17, // A3, PB3
54+
18, // A4, PB4
55+
14, // A5, PA10
56+
15, // A6, PA14
57+
16 // A7, PA13
58+
};
59+
60+
// ----------------------------------------------------------------------------
61+
#ifdef __cplusplus
62+
extern "C" {
63+
#endif
64+
65+
/**
66+
* @brief System Clock Configuration
67+
* @param None
68+
* @retval None
69+
*/
70+
WEAK void SystemClock_Config(void)
71+
{
72+
RCC_OscInitTypeDef RCC_OscInitStruct = {};
73+
RCC_ClkInitTypeDef RCC_ClkInitStruct = {};
74+
75+
/** Configure LSE Drive Capability
76+
*/
77+
HAL_PWR_EnableBkUpAccess();
78+
__HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW);
79+
/** Configure the main internal regulator output voltage
80+
*/
81+
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
82+
/** Initializes the CPU, AHB and APB busses clocks
83+
*/
84+
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_MSI;
85+
RCC_OscInitStruct.LSEState = RCC_LSE_ON;
86+
RCC_OscInitStruct.MSIState = RCC_MSI_ON;
87+
RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT;
88+
RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_11;
89+
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
90+
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
91+
Error_Handler();
92+
}
93+
/** Configure the SYSCLKSource, HCLK, PCLK1 and PCLK2 clocks dividers
94+
*/
95+
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK3 | RCC_CLOCKTYPE_HCLK
96+
| RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1
97+
| RCC_CLOCKTYPE_PCLK2;
98+
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
99+
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
100+
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
101+
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
102+
RCC_ClkInitStruct.AHBCLK3Divider = RCC_SYSCLK_DIV1;
103+
104+
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) {
105+
Error_Handler();
106+
}
107+
}
108+
109+
#ifdef __cplusplus
110+
}
111+
#endif
112+
#endif /* ARDUINO_LORA_E5_MINI */

0 commit comments

Comments
 (0)
pFad - Phonifier reborn

Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.

Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.


Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy