fix: typos raised by new codespell version

fpistm · fpistm · commit c9a750970ec5 · 2023-03-09T14:39:43.000+01:00
Signed-off-by: Frederic Pillon &lt;frederic.pillon@st.com&gt;
diff --git a/libraries/CMSIS_DSP/examples/arm_sin_cos_example_f32/arm_sin_cos_example_f32.ino b/libraries/CMSIS_DSP/examples/arm_sin_cos_example_f32/arm_sin_cos_example_f32.ino
@@ -47,12 +47,12 @@
 
    \par Description:
    \par
-   Demonstrates the Pythagorean trignometric identity with the use of Cosine, Sine, Vector
+   Demonstrates the Pythagorean trigonometric identity with the use of Cosine, Sine, Vector
    Multiplication, and Vector Addition functions.
 
    \par Algorithm:
    \par
-   Mathematically, the Pythagorean trignometric identity is defined by the following equation:
+   Mathematically, the Pythagorean trigonometric identity is defined by the following equation:
     <pre>sin(x) * sin(x) + cos(x) * cos(x) = 1</pre>
    where \c x is the angle in radians.
 
diff --git a/libraries/SoftwareSerial/src/SoftwareSerial.cpp b/libraries/SoftwareSerial/src/SoftwareSerial.cpp
@@ -283,7 +283,7 @@ inline void SoftwareSerial::recv()
       if (inbit) {
         rx_buffer |= 0x80;
       }
-      rx_bit_cnt++; // Preprare for next bit
+      rx_bit_cnt++; // Prepare for next bit
       rx_tick_cnt = OVERSAMPLE; // Wait OVERSAMPLE ticks before sampling next bit
     }
   }
diff --git a/libraries/SrcWrapper/src/stm32/uart.c b/libraries/SrcWrapper/src/stm32/uart.c
@@ -36,7 +36,7 @@ extern "C" {
 #define DEBUG_UART_BAUDRATE 9600
 #endif
 
-/* @brief uart caracteristics */
+/* @brief uart characteristics */
 typedef enum {
 #if defined(USART1_BASE)
   UART1_INDEX,
diff --git a/libraries/Wire/examples/i2c_scanner/i2c_scanner.ino b/libraries/Wire/examples/i2c_scanner/i2c_scanner.ino
@@ -6,7 +6,7 @@
 //    can be found in many places.
 //    For example on the Arduino.cc forum.
 //    The original author is not know.
-// Version 2, Juni 2012, Using Arduino 1.0.1
+// Version 2, Jun 2012, Using Arduino 1.0.1
 //     Adapted to be as simple as possible by Arduino.cc user Krodal
 // Version 3, Feb 26  2013
 //    V3 by louarnold
@@ -47,7 +47,7 @@
  If you want to use the two I2Cs simultaneously, create a new instance for the second I2C
   TwoWire Wire2(PB11,PB10);
   Wire2.begin();
- 
+
 */
 
 
@@ -76,21 +76,21 @@ void loop() {
 
     Wire.beginTransmission(address);
     error = Wire.endTransmission();
-    
+
     if (error == 0) {
       Serial.print("I2C device found at address 0x");
-      if (address < 16) 
+      if (address < 16)
         Serial.print("0");
       Serial.println(address, HEX);
 
       nDevices++;
     }
     else if (error == 4) {
       Serial.print("Unknown error at address 0x");
-      if (address < 16) 
+      if (address < 16)
         Serial.print("0");
       Serial.println(address, HEX);
-    }    
+    }
   }
   if (nDevices == 0)
     Serial.println("No I2C devices found");

Original file line number	Diff line number	Diff line change
`@@ -283,7 +283,7 @@ inline void SoftwareSerial::recv()`
`283`	`283`	`if (inbit) {`
`284`	`284`	`rx_buffer \|= 0x80;`
`285`	`285`	`}`
`286`		`- rx_bit_cnt++; // Preprare for next bit`
	`286`	`+ rx_bit_cnt++; // Prepare for next bit`
`287`	`287`	`rx_tick_cnt = OVERSAMPLE; // Wait OVERSAMPLE ticks before sampling next bit`
`288`	`288`	`}`
`289`	`289`	`}`