diff --git a/README.md b/README.md
index 0b757297c6..6eed49393d 100644
--- a/README.md
+++ b/README.md
@@ -189,7 +189,10 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d
 
 | Status | Device(s) | Name | Release | Notes |
 | :----: | :-------: | ---- | :-----: | :---- |
+| :yellow_heart: | STM32C011D6 | Generic Board | **2.6.0** |  |
+| :yellow_heart: | STM32C011F4<br>STM32C011F6 | Generic Board | **2.6.0** |  |
 | :green_heart: | STM32C031C4<br>STM32C031C6 | Generic Board | *2.5.0* |  |
+| :yellow_heart: | STM32C031F4<br>STM32C031F6 | Generic Board | **2.6.0** |  |
 
 ### Generic STM32F0 boards
 
diff --git a/boards.txt b/boards.txt
index 9567cb654d..575990b107 100644
--- a/boards.txt
+++ b/boards.txt
@@ -1207,6 +1207,46 @@ GenC0.build.flash_offset=0x0
 GenC0.upload.maximum_size=0
 GenC0.upload.maximum_data_size=0
 
+# Generic C011D6Yx
+GenC0.menu.pnum.GENERIC_C011D6YX=Generic C011D6Yx
+GenC0.menu.pnum.GENERIC_C011D6YX.upload.maximum_size=32768
+GenC0.menu.pnum.GENERIC_C011D6YX.upload.maximum_data_size=6144
+GenC0.menu.pnum.GENERIC_C011D6YX.build.board=GENERIC_C011D6YX
+GenC0.menu.pnum.GENERIC_C011D6YX.build.product_line=STM32C011xx
+GenC0.menu.pnum.GENERIC_C011D6YX.build.variant=STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P
+
+# Generic C011F4Px
+GenC0.menu.pnum.GENERIC_C011F4PX=Generic C011F4Px
+GenC0.menu.pnum.GENERIC_C011F4PX.upload.maximum_size=16384
+GenC0.menu.pnum.GENERIC_C011F4PX.upload.maximum_data_size=6144
+GenC0.menu.pnum.GENERIC_C011F4PX.build.board=GENERIC_C011F4PX
+GenC0.menu.pnum.GENERIC_C011F4PX.build.product_line=STM32C011xx
+GenC0.menu.pnum.GENERIC_C011F4PX.build.variant=STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P
+
+# Generic C011F6Px
+GenC0.menu.pnum.GENERIC_C011F6PX=Generic C011F6Px
+GenC0.menu.pnum.GENERIC_C011F6PX.upload.maximum_size=32768
+GenC0.menu.pnum.GENERIC_C011F6PX.upload.maximum_data_size=6144
+GenC0.menu.pnum.GENERIC_C011F6PX.build.board=GENERIC_C011F6PX
+GenC0.menu.pnum.GENERIC_C011F6PX.build.product_line=STM32C011xx
+GenC0.menu.pnum.GENERIC_C011F6PX.build.variant=STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P
+
+# Generic C011F4Ux
+GenC0.menu.pnum.GENERIC_C011F4UX=Generic C011F4Ux
+GenC0.menu.pnum.GENERIC_C011F4UX.upload.maximum_size=16384
+GenC0.menu.pnum.GENERIC_C011F4UX.upload.maximum_data_size=6144
+GenC0.menu.pnum.GENERIC_C011F4UX.build.board=GENERIC_C011F4UX
+GenC0.menu.pnum.GENERIC_C011F4UX.build.product_line=STM32C011xx
+GenC0.menu.pnum.GENERIC_C011F4UX.build.variant=STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P
+
+# Generic C011F6Ux
+GenC0.menu.pnum.GENERIC_C011F6UX=Generic C011F6Ux
+GenC0.menu.pnum.GENERIC_C011F6UX.upload.maximum_size=32768
+GenC0.menu.pnum.GENERIC_C011F6UX.upload.maximum_data_size=6144
+GenC0.menu.pnum.GENERIC_C011F6UX.build.board=GENERIC_C011F6UX
+GenC0.menu.pnum.GENERIC_C011F6UX.build.product_line=STM32C011xx
+GenC0.menu.pnum.GENERIC_C011F6UX.build.variant=STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P
+
 # Generic C031C4Tx
 GenC0.menu.pnum.GENERIC_C031C4TX=Generic C031C4Tx
 GenC0.menu.pnum.GENERIC_C031C4TX.upload.maximum_size=16384
@@ -1239,6 +1279,22 @@ GenC0.menu.pnum.GENERIC_C031C6UX.build.board=GENERIC_C031C6UX
 GenC0.menu.pnum.GENERIC_C031C6UX.build.product_line=STM32C031xx
 GenC0.menu.pnum.GENERIC_C031C6UX.build.variant=STM32C0xx/C031C(4-6)(T-U)
 
+# Generic C031F4Px
+GenC0.menu.pnum.GENERIC_C031F4PX=Generic C031F4Px
+GenC0.menu.pnum.GENERIC_C031F4PX.upload.maximum_size=16384
+GenC0.menu.pnum.GENERIC_C031F4PX.upload.maximum_data_size=12288
+GenC0.menu.pnum.GENERIC_C031F4PX.build.board=GENERIC_C031F4PX
+GenC0.menu.pnum.GENERIC_C031F4PX.build.product_line=STM32C031xx
+GenC0.menu.pnum.GENERIC_C031F4PX.build.variant=STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P
+
+# Generic C031F6Px
+GenC0.menu.pnum.GENERIC_C031F6PX=Generic C031F6Px
+GenC0.menu.pnum.GENERIC_C031F6PX.upload.maximum_size=32768
+GenC0.menu.pnum.GENERIC_C031F6PX.upload.maximum_data_size=12288
+GenC0.menu.pnum.GENERIC_C031F6PX.build.board=GENERIC_C031F6PX
+GenC0.menu.pnum.GENERIC_C031F6PX.build.product_line=STM32C031xx
+GenC0.menu.pnum.GENERIC_C031F6PX.build.variant=STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P
+
 # Upload menu
 GenC0.menu.upload_method.swdMethod=STM32CubeProgrammer (SWD)
 GenC0.menu.upload_method.swdMethod.upload.protocol=0
diff --git a/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/generic_clock.c b/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/generic_clock.c
index 93cb896aa0..70d1709d5d 100644
--- a/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/generic_clock.c
+++ b/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/generic_clock.c
@@ -23,8 +23,32 @@
   */
 WEAK void SystemClock_Config(void)
 {
-  /* SystemClock_Config can be generated by STM32CubeMX */
-#warning "SystemClock_Config() is empty. Default clock at reset is used."
+  LL_FLASH_SetLatency(LL_FLASH_LATENCY_1);
+
+  /* HSI configuration and activation */
+  LL_RCC_HSI_Enable();
+  while (LL_RCC_HSI_IsReady() != 1) {
+  }
+
+  LL_RCC_HSI_SetCalibTrimming(64);
+  LL_RCC_SetHSIDiv(LL_RCC_HSI_DIV_1);
+  /* Set AHB prescaler*/
+  LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+
+  /* Sysclk activation on the HSI */
+  LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_HSI);
+  while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_HSI) {
+  }
+
+  /* Set APB1 prescaler*/
+  LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
+  /* Update CMSIS variable (which can be updated also through SystemCoreClockUpdate function) */
+  LL_SetSystemCoreClock(48000000);
+
+  /* Update the time base */
+  if (HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK) {
+    Error_Handler();
+  }
 }
 
 #endif /* ARDUINO_GENERIC_* */
diff --git a/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/ldscript.ld b/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/ldscript.ld
new file mode 100644
index 0000000000..5017497853
--- /dev/null
+++ b/variants/STM32C0xx/C011D6Y_C011F(4-6)(P-U)_C031F(4-6)P/ldscript.ld
@@ -0,0 +1,185 @@
+/*
+******************************************************************************
+**
+** @file        : LinkerScript.ld
+**
+** @author      : Auto-generated by STM32CubeIDE
+**
+** @brief       : Linker script for STM32C011F6Ux Device from STM32C0 series
+**                      32Kbytes FLASH
+**                      6Kbytes RAM
+**
+**                Set heap size, stack size and stack location according
+**                to application requirements.
+**
+**                Set memory bank area and size if external memory is used
+**
+**  Target      : STMicroelectronics STM32
+**
+**  Distribution: The file is distributed as is, without any warranty
+**                of any kind.
+**
+******************************************************************************
+** @attention
+**
+** Copyright (c) 2023 STMicroelectronics.
+** All rights reserved.
+**
+** This software is licensed under terms that can be found in the LICENSE file
+** in the root directory of this software component.
+** If no LICENSE file comes with this software, it is provided AS-IS.
+**
+******************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */
+
+_Min_Heap_Size = 0x200; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Memories definition */
+MEMORY
+{
+  RAM    (xrw)    : ORIGIN = 0x20000000,   LENGTH = LD_MAX_DATA_SIZE
+  FLASH    (rx)    : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET
+}
+
+/* Sections */
+SECTIONS
+{
+  /* The startup code into "FLASH" Rom type memory */
+  .isr_vector :
+  {
+    . = ALIGN(4);
+    KEEP(*(.isr_vector)) /* Startup code */
+    . = ALIGN(4);
+  } >FLASH
+
+  /* The program code and other data into "FLASH" Rom type memory */
+  .text :
+  {
+    . = ALIGN(4);
+    *(.text)           /* .text sections (code) */
+    *(.text*)          /* .text* sections (code) */
+    *(.glue_7)         /* glue arm to thumb code */
+    *(.glue_7t)        /* glue thumb to arm code */
+    *(.eh_frame)
+
+    KEEP (*(.init))
+    KEEP (*(.fini))
+
+    . = ALIGN(4);
+    _etext = .;        /* define a global symbols at end of code */
+  } >FLASH
+
+  /* Constant data into "FLASH" Rom type memory */
+  .rodata :
+  {
+    . = ALIGN(4);
+    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
+    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
+    . = ALIGN(4);
+  } >FLASH
+
+  .ARM.extab   : {
+    . = ALIGN(4);
+    *(.ARM.extab* .gnu.linkonce.armextab.*)
+    . = ALIGN(4);
+  } >FLASH
+
+  .ARM : {
+    . = ALIGN(4);
+    __exidx_start = .;
+    *(.ARM.exidx*)
+    __exidx_end = .;
+    . = ALIGN(4);
+  } >FLASH
+
+  .preinit_array     :
+  {
+    . = ALIGN(4);
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array*))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+    . = ALIGN(4);
+  } >FLASH
+
+  .init_array :
+  {
+    . = ALIGN(4);
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT(.init_array.*)))
+    KEEP (*(.init_array*))
+    PROVIDE_HIDDEN (__init_array_end = .);
+    . = ALIGN(4);
+  } >FLASH
+
+  .fini_array :
+  {
+    . = ALIGN(4);
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT(.fini_array.*)))
+    KEEP (*(.fini_array*))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+    . = ALIGN(4);
+  } >FLASH
+
+  /* Used by the startup to initialize data */
+  _sidata = LOADADDR(.data);
+
+  /* Initialized data sections into "RAM" Ram type memory */
+  .data :
+  {
+    . = ALIGN(4);
+    _sdata = .;        /* create a global symbol at data start */
+    *(.data)           /* .data sections */
+    *(.data*)          /* .data* sections */
+    *(.RamFunc)        /* .RamFunc sections */
+    *(.RamFunc*)       /* .RamFunc* sections */
+
+    . = ALIGN(4);
+    _edata = .;        /* define a global symbol at data end */
+
+  } >RAM AT> FLASH
+
+  /* Uninitialized data section into "RAM" Ram type memory */
+  . = ALIGN(4);
+  .bss :
+  {
+    /* This is used by the startup in order to initialize the .bss section */
+    _sbss = .;         /* define a global symbol at bss start */
+    __bss_start__ = _sbss;
+    *(.bss)
+    *(.bss*)
+    *(COMMON)
+
+    . = ALIGN(4);
+    _ebss = .;         /* define a global symbol at bss end */
+    __bss_end__ = _ebss;
+  } >RAM
+
+  /* User_heap_stack section, used to check that there is enough "RAM" Ram  type memory left */
+  ._user_heap_stack :
+  {
+    . = ALIGN(8);
+    PROVIDE ( end = . );
+    PROVIDE ( _end = . );
+    . = . + _Min_Heap_Size;
+    . = . + _Min_Stack_Size;
+    . = ALIGN(8);
+  } >RAM
+
+  /* Remove information from the compiler libraries */
+  /DISCARD/ :
+  {
+    libc.a ( * )
+    libm.a ( * )
+    libgcc.a ( * )
+  }
+
+  .ARM.attributes 0 : { *(.ARM.attributes) }
+}

<!DOCTYPE html PUBLIC '-//W3C//DTD XHTML 1.0 Transitional//EN' 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd'>
<html xmlns='http://www.w3.org/1999/xhtml'>
<head>
<title>pFad - Phonifier reborn</title>
<meta http-equiv='Content-Type' content='text/html; charset=utf-8' />
</head>
<body>
<h1>Pfad - The Proxy pFad of &#169; 2024 Garber Painting. All rights reserved.</h1>


<!-- Disclaimer -->
<p>Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.</p>
<br>
<p>Alternative Proxies:</p><p><a href="http://rainy.clevelandohioweatherforecast.com/php-proxy/index.php?q=https://patch-diff.githubusercontent.com/raw/stm32duino/Arduino_Core_STM32/pull/2048.diff" target="_blank">Alternative Proxy</a></p><p><a href="http://rainy.clevelandohioweatherforecast.com/pFad/index.php?u=https://patch-diff.githubusercontent.com/raw/stm32duino/Arduino_Core_STM32/pull/2048.diff" target="_blank">pFad Proxy</a></p><p><a href="http://rainy.clevelandohioweatherforecast.com/pFad/v3index.php?u=https://patch-diff.githubusercontent.com/raw/stm32duino/Arduino_Core_STM32/pull/2048.diff" target="_blank">pFad v3 Proxy</a></p><p><a href="http://rainy.clevelandohioweatherforecast.com/pFad/v4index.php?u=https://patch-diff.githubusercontent.com/raw/stm32duino/Arduino_Core_STM32/pull/2048.diff" target="_blank">pFad v4 Proxy</a></p></body>
</html>