diff --git a/stm32CubeProg.sh b/stm32CubeProg.sh
index e79ef71dd..ed5e00c03 100644
--- a/stm32CubeProg.sh
+++ b/stm32CubeProg.sh
@@ -1,5 +1,6 @@
 #!/bin/sh -
 set -o nounset # Treat unset variables as an error
+# set -o xtrace # Print command traces before executing command.
 
 STM32CP_CLI=
 ADDRESS=0x8000000
@@ -13,7 +14,7 @@ OPTS=""
 usage() {
   echo "############################################################"
   echo "##"
-  echo "## $(basename "$0") <protocol> <file_path> [OPTIONS]"
+  echo "## $(basename "$0") <protocol> <file_path> <offset> [OPTIONS]"
   echo "##"
   echo "## protocol:"
   echo "##   0: SWD"
@@ -22,16 +23,15 @@ usage() {
   echo "##   Note: prefix it by 1 to erase all sectors."
   echo "##         Ex: 10 erase all sectors using SWD interface."
   echo "## file_path: file path name to be downloaded: (bin, hex)"
+  echo "## offset: offset to add to $ADDRESS"
   echo "## Options:"
   echo "##   For SWD and DFU: no mandatory options"
   echo "##   For Serial: <com_port>"
   echo "##     com_port: serial identifier (mandatory). Ex: /dev/ttyS0 or COM1"
   echo "##"
   echo "## Note: all trailing arguments will be passed to the $STM32CP_CLI"
-  echo "##   They have to be valid commands for STM32 MCU"
-  echo "##   Ex: -g: Run the code at the specified address"
-  echo "##       -rst: Reset system"
-  echo "##       -s: start automatically (optional)"
+  echo "##   They have to be valid commands for STM32CubeProgrammer cli"
+  echo "##   Ex: -rst: Reset system"
   echo "############################################################"
   exit "$1"
 }
@@ -40,13 +40,13 @@ UNAME_OS="$(uname -s)"
 case "${UNAME_OS}" in
   Linux*)
     STM32CP_CLI=STM32_Programmer.sh
-    if ! command -v $STM32CP_CLI >/dev/null 2>&1; then
+    if ! command -v $STM32CP_CLI > /dev/null 2>&1; then
       export PATH="$HOME/STMicroelectronics/STM32Cube/STM32CubeProgrammer/bin":"$PATH"
     fi
-    if ! command -v $STM32CP_CLI >/dev/null 2>&1; then
+    if ! command -v $STM32CP_CLI > /dev/null 2>&1; then
       export PATH="/opt/stm32cubeprog/bin":"$PATH"
     fi
-    if ! command -v $STM32CP_CLI >/dev/null 2>&1; then
+    if ! command -v $STM32CP_CLI > /dev/null 2>&1; then
       echo "STM32CubeProgrammer not found ($STM32CP_CLI)."
       echo "Please install it or add '<STM32CubeProgrammer path>/bin' to your PATH environment:"
       echo "https://www.st.com/en/development-tools/stm32cubeprog.html"
@@ -56,10 +56,10 @@ case "${UNAME_OS}" in
     ;;
   Darwin*)
     STM32CP_CLI=STM32_Programmer_CLI
-    if ! command -v $STM32CP_CLI >/dev/null 2>&1; then
+    if ! command -v $STM32CP_CLI > /dev/null 2>&1; then
       export PATH="/Applications/STMicroelectronics/STM32Cube/STM32CubeProgrammer/STM32CubeProgrammer.app/Contents/MacOs/bin":"$PATH"
     fi
-    if ! command -v $STM32CP_CLI >/dev/null 2>&1; then
+    if ! command -v $STM32CP_CLI > /dev/null 2>&1; then
       echo "STM32CubeProgrammer not found ($STM32CP_CLI)."
       echo "Please install it or add '<STM32CubeProgrammer path>/bin' to your PATH environment:"
       echo "https://www.st.com/en/development-tools/stm32cubeprog.html"
@@ -69,7 +69,7 @@ case "${UNAME_OS}" in
     ;;
   Windows*)
     STM32CP_CLI=STM32_Programmer_CLI.exe
-    if ! command -v $STM32CP_CLI >/dev/null 2>&1; then
+    if ! command -v $STM32CP_CLI > /dev/null 2>&1; then
       if [ -n "${PROGRAMFILES+x}" ]; then
         STM32CP86=${PROGRAMFILES}/STMicroelectronics/STM32Cube/STM32CubeProgrammer/bin
         export PATH="${STM32CP86}":"$PATH"
@@ -78,7 +78,7 @@ case "${UNAME_OS}" in
         STM32CP=${PROGRAMW6432}/STMicroelectronics/STM32Cube/STM32CubeProgrammer/bin
         export PATH="${STM32CP}":"$PATH"
       fi
-      if ! command -v $STM32CP_CLI >/dev/null 2>&1; then
+      if ! command -v $STM32CP_CLI > /dev/null 2>&1; then
         echo "STM32CubeProgrammer not found ($STM32CP_CLI)."
         echo "Please install it or add '<STM32CubeProgrammer path>\bin' to your PATH environment:"
         echo "https://www.st.com/en/development-tools/stm32cubeprog.html"
@@ -92,7 +92,7 @@ case "${UNAME_OS}" in
     ;;
 esac
 
-if [ $# -lt 2 ]; then
+if [ $# -lt 3 ]; then
   echo "Not enough arguments!"
   usage 2
 fi
@@ -100,6 +100,9 @@ fi
 # Parse options
 PROTOCOL=$1
 FILEPATH=$2
+OFFSET=$3
+ADDRESS=$(printf "0x%x" $((ADDRESS + OFFSET)))
+
 # Protocol $1
 # 1x: Erase all sectors
 if [ "$1" -ge 10 ]; then
@@ -114,19 +117,19 @@ case $PROTOCOL in
   0)
     PORT="SWD"
     MODE="mode=UR"
-    shift 2
+    shift 3
     ;;
   1)
-    if [ $# -lt 3 ]; then
+    if [ $# -lt 4 ]; then
       usage 3
     else
-      PORT=$3
-      shift 3
+      PORT=$4
+      shift 4
     fi
     ;;
   2)
     PORT="USB1"
-    shift 2
+    shift 3
     ;;
   *)
     echo "Protocol unknown!"
@@ -138,6 +141,6 @@ if [ $# -gt 0 ]; then
   OPTS="$*"
 fi
 
-${STM32CP_CLI} -c port=${PORT} ${MODE} ${ERASE:+"-e all"} -q -d "${FILEPATH}" ${ADDRESS} "${OPTS}"
+${STM32CP_CLI} -c port=${PORT} ${MODE} ${ERASE:+"-e all"} -q -d "${FILEPATH}" "${ADDRESS}" -s "${ADDRESS}" "${OPTS}"
 
 exit $?

<!DOCTYPE html PUBLIC '-//W3C//DTD XHTML 1.0 Transitional//EN' 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd'>
<html xmlns='http://www.w3.org/1999/xhtml'>
<head>
<title>pFad - Phonifier reborn</title>
<meta http-equiv='Content-Type' content='text/html; charset=utf-8' />
</head>
<body>
<h1>Pfad - The Proxy pFad of &#169; 2024 Garber Painting. All rights reserved.</h1>


<!-- Disclaimer -->
<p>Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.</p>
<br>
<p>Alternative Proxies:</p><p><a href="http://rainy.clevelandohioweatherforecast.com/php-proxy/index.php?q=https://patch-diff.githubusercontent.com/raw/stm32duino/Arduino_Tools/pull/90.diff" target="_blank">Alternative Proxy</a></p><p><a href="http://rainy.clevelandohioweatherforecast.com/pFad/index.php?u=https://patch-diff.githubusercontent.com/raw/stm32duino/Arduino_Tools/pull/90.diff" target="_blank">pFad Proxy</a></p><p><a href="http://rainy.clevelandohioweatherforecast.com/pFad/v3index.php?u=https://patch-diff.githubusercontent.com/raw/stm32duino/Arduino_Tools/pull/90.diff" target="_blank">pFad v3 Proxy</a></p><p><a href="http://rainy.clevelandohioweatherforecast.com/pFad/v4index.php?u=https://patch-diff.githubusercontent.com/raw/stm32duino/Arduino_Tools/pull/90.diff" target="_blank">pFad v4 Proxy</a></p></body>
</html>