diff --git a/performance.rst b/performance.rst index 22b918c1852..fbf5ea980e9 100644 --- a/performance.rst +++ b/performance.rst @@ -1,205 +1,210 @@ .. index:: - single: Tests + single: Performance; Byte code cache; OPcache; APC Performance =========== -Symfony is fast, right out of the box. Of course, if you really need speed, -there are many ways that you can make Symfony even faster. In this article, -you'll explore some of the ways to make your Symfony application even faster. +Symfony is fast, right out of the box. However, you can make it faster if you +optimize your servers and your applications as explained in the following +performance checklists. -.. index:: - single: Performance; Byte code cache +Symfony Application Checklist +----------------------------- + +#. :ref:`Install APCu Polyfill if your server uses APC ` +#. :ref:`Enable APC Caching for the Autoloader ` +#. :ref:`Use Bootstrap Files ` + +Production Server Checklist +--------------------------- -Use a Byte Code Cache (e.g. OPcache) ------------------------------------- +#. :ref:`Use the OPcache byte code cache ` +#. :ref:`Configure OPcache for maximum performance ` +#. :ref:`Don't check PHP files timestamps ` +#. :ref:`Configure the PHP realpath Cache ` +#. :ref:`Optimize Composer Autoloader ` -The first thing that you should do to improve your performance is to use a -"byte code cache". These caches store the compiled PHP files to avoid having -to recompile them for every request. +.. _performance-install-apcu-polyfill: -There are a number of `byte code caches`_ available, some of which are open -source. As of PHP 5.5, PHP comes with `OPcache`_ built-in. For older versions, -the most widely used byte code cache is `APC`_. +Install APCu Polyfill if your Server Uses APC +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -.. tip:: +If your production server still uses the legacy APC PHP extension instead of +OPcache, install the `APCu Polyfill component`_ in your application to enable +compatibility with `APCu PHP functions`_ and unlock support for advanced Symfony +features, such as the APCu Cache adapter. - If your server still uses the legacy APC PHP extension, install the - `APCu Polyfill component`_ in your application to enable compatibility with - `APCu PHP functions`_ and unlock support for advanced Symfony features, such - as the APCu Cache adapter. +.. _performance-autoloader-apc-cache: -Using a byte code cache really has no downside, and Symfony has been designed -to perform really well in this type of environment. +Enable APC Caching for the Autoloader +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -Monitoring Source File Changes -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The class autoloading mechanism is one of the slowest parts in PHP applications +that make use of lots of classes, such as Symfony. A simple way to improve its +performance is to use the :class:`Symfony\\Component\\ClassLoader\\ApcClassLoader`, +which caches the location of each class after it's located the first time. -Most byte code caches monitor the source files for changes. This ensures that if -the source of a file changes, the byte code is recompiled automatically. -This is really convenient, but it adds overhead. +To use it, adapt your front controller file like this:: -For this reason, some byte code caches offer an option to disable these checks. -For example, to disable these checks in APC, simply add ``apc.stat=0`` to your -``php.ini`` configuration. + // app.php + // ... -When disabling these checks, it will be up to the server administrators to -ensure that the cache is cleared whenever any source files change. Otherwise, -the updates you've made in the application won't be seen. + $loader = require_once __DIR__.'/../app/bootstrap.php.cache'; -For the same reasons, the byte code cache must also be cleared when deploying -the application (for example by calling ``apc_clear_cache()`` PHP function when -using APC and ``opcache_reset()`` when using OPcache). + // Change 'sf' by something unique to this app to prevent + // conflicts with other applications running in the same server + $loader = new ApcClassLoader('sf', $loader); + $loader->register(true); + + // ... + +For more details, see :doc:`/components/class_loader/cache_class_loader`. .. note:: - In PHP, the CLI and the web processes don't share the same OPcache. This - means that you cannot clear the web server OPcache by executing some command - in your terminal. These are some of the possible solutions: + When using the APC autoloader, if you add new classes, they will be found + automatically and everything will work the same as before (i.e. no + reason to "clear" the cache). However, if you change the location of a + particular namespace or prefix, you'll need to flush your APC cache. Otherwise, + the autoloader will still be looking at the old location for all classes + inside that namespace. - #. Restart the web server; - #. Call the :phpfunction:`apc_clear_cache` or :phpfunction:`opcache_reset` - functions via the web server (i.e. by having these in a script that - you execute over the web); - #. Use the `cachetool`_ utility to control APC and OPcache from the CLI. +.. _performance-use-bootstrap-files: -Optimizing all the Files Used by Symfony -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Use Bootstrap Files +~~~~~~~~~~~~~~~~~~~ -By default, PHP's OPcache saves up to 2,000 files in the byte code cache. This -number is too low for the typical Symfony application, so you should set a -higher limit with the `opcache.max_accelerated_files`_ configuration option: +.. caution:: -.. code-block:: ini + Thanks to the optimizations introduced in PHP 7, bootstrap files are no + longer necessary when running your Symfony applications with PHP 7 or a + newer PHP version. - ; php.ini - opcache.max_accelerated_files = 20000 +The Symfony Standard Edition includes a script to generate a so-called +`bootstrap file`_, which is a large file containing the code of the most +commonly used classes. This saves a lot of IO operations because Symfony no +longer needs to look for and read those files. -Configure the PHP realpath Cache --------------------------------- +If you're using the Symfony Standard Edition, then you're probably already +using the bootstrap file. To be sure, open your front controller (usually +``app.php``) and check to make sure that the following line exists:: -PHP uses an internal cache to store the result of mapping file paths to their -real and absolute file system paths. This increases the performance for -applications like Symfony that open many PHP files, especially on Windows -systems. + require_once __DIR__.'/../app/bootstrap.php.cache'; -Consider increasing the ``realpath_cache_size`` and ``realpath_cache_ttl``: +Note that there are two disadvantages when using a bootstrap file: -.. code-block:: ini +* the file needs to be regenerated whenever any of the original sources change + (i.e. when you update the Symfony source or vendor libraries); - ; php.ini - ; 4096k is the default value in PHP 7.2 - realpath_cache_size=4096K - realpath_cache_ttl=600 +* when debugging, one will need to place break points inside the bootstrap file. -.. index:: - single: Performance; Autoloader +If you're using the Symfony Standard Edition, the bootstrap file is automatically +rebuilt after updating the vendor libraries via the ``composer install`` command. + +.. note:: -Use Composer's Class Map Functionality --------------------------------------- + Even when using a byte code cache, performance will improve when using a + bootstrap file since there will be fewer files to monitor for changes. Of + course, if this feature is disabled in the byte code cache (e.g. + ``apc.stat=0`` in APC), there is no longer a reason to use a bootstrap file. -By default, the Symfony Standard Edition uses Composer's autoloader -in the `autoload.php`_ file. This autoloader is easy to use, as it will -automatically find any new classes that you've placed in the registered -directories. +.. _performance-use-opcache: -Unfortunately, this comes at a cost, as the loader iterates over all configured -namespaces to find a particular file, making ``file_exists()`` calls until it -finally finds the file it's looking for. +Use the OPcache Byte Code Cache +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -The simplest solution is to tell Composer to build an optimized "class map", -which is a big array of the locations of all the classes and it's stored -in ``vendor/composer/autoload_classmap.php``. +OPcache stores the compiled PHP files to avoid having to recompile them for +every request. There are some `byte code caches`_ available, but as of PHP +5.5, PHP comes with `OPcache`_ built-in. For older versions, the most widely +used byte code cache is `APC`_. -The class map can be generated from the command line, and might become part of -your deploy process: +.. _performance-configure-opcache: -.. code-block:: bash +Configure OPcache for Maximum Performance +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - $ composer dump-autoload --optimize --no-dev --classmap-authoritative +The default OPcache configuration is not suited for Symfony applications, so +it's recommended to change these settings as follows: -``--optimize`` - Dumps every PSR-0 and PSR-4 compatible class used in your application. -``--no-dev`` - Excludes the classes that are only needed in the development environment - (e.g. tests). -``--classmap-authoritative`` - Prevents Composer from scanning the file system for classes that are not - found in the class map. +.. code-block:: ini -Caching the Autoloader with APC -------------------------------- + ; php.ini + ; maximum memory that OPcache can use to store compiled PHP files + opcache.memory_consumption=256M -Another solution is to cache the location of each class after it's located -the first time. Symfony comes with a class - :class:`Symfony\\Component\\ClassLoader\\ApcClassLoader` - -that does exactly this. To use it, just adapt your front controller file. -If you're using the Standard Distribution, this code should already be available -as comments in this file:: + ; maximum number of files that can be stored in the cache + opcache.max_accelerated_files=20000 - // app.php - // ... +.. _performance-dont-check-timestamps: - $loader = require_once __DIR__.'/../app/bootstrap.php.cache'; +Don't Check PHP Files Timestamps +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - // Use APC for autoloading to improve performance - // Change 'sf2' by the prefix you want in order - // to prevent key conflict with another application - /* - $loader = new ApcClassLoader('sf2', $loader); - $loader->register(true); - */ +In production servers, PHP files should never change, unless a new application +version is deployed. However, by default OPcache checks if cached files have +changed their contents since they were cached. This check introduces some +overhead that can be avoided as follows: - // ... +.. code-block:: ini -For more details, see :doc:`/components/class_loader/cache_class_loader`. + ; php.ini + opcache.validate_timestamps=0 -.. note:: +After each deploy, you must empty and regenerate the cache of OPcache. Otherwise +you won't see the updates made in the application. Given than in PHP, the CLI +and the web processes don't share the same OPcache, you cannot clear the web +server OPcache by executing some command in your terminal. These are some of the +possible solutions: - When using the APC autoloader, if you add new classes, they will be found - automatically and everything will work the same as before (i.e. no - reason to "clear" the cache). However, if you change the location of a - particular namespace or prefix, you'll need to flush your APC cache. Otherwise, - the autoloader will still be looking at the old location for all classes - inside that namespace. +1. Restart the web server; +2. Call the ``apc_clear_cache()`` or ``opcache_reset()`` functions via the + web server (i.e. by having these in a script that you execute over the web); +3. Use the `cachetool`_ utility to control APC and OPcache from the CLI. -.. index:: - single: Performance; Bootstrap files +.. _performance-configure-realpath-cache: -Use Bootstrap Files -------------------- +Configure the PHP realpath Cache +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -To ensure optimal flexibility and code reuse, Symfony applications leverage -a variety of classes and 3rd party components. But loading all of these classes -from separate files on each request can result in some overhead. To reduce -this overhead, the Symfony Standard Edition provides a script to generate -a so-called `bootstrap file`_, consisting of multiple classes definitions -in a single file. By including this file (which contains a copy of many of -the core classes), Symfony no longer needs to include any of the source files -containing those classes. This will reduce disc IO quite a bit. +When a relative path is transformed into its real and absolute path, PHP +caches the result to improve performance. The default config of this cache +is not suited for applications that open many PHP files, such as Symfony. +It's recommended to change these settings as follows: -If you're using the Symfony Standard Edition, then you're probably already -using the bootstrap file. To be sure, open your front controller (usually -``app.php``) and check to make sure that the following line exists:: +.. code-block:: ini - require_once __DIR__.'/../app/bootstrap.php.cache'; + ; php.ini + ; maximum memory allocated to store the results + realpath_cache_size=4096K -Note that there are two disadvantages when using a bootstrap file: + ; save the results for 10 minutes (600 seconds) + realpath_cache_ttl=600 -* the file needs to be regenerated whenever any of the original sources change - (i.e. when you update the Symfony source or vendor libraries); +.. _performance-optimize-composer-autoloader: -* when debugging, one will need to place break points inside the bootstrap file. +Optimize Composer Autoloader +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -If you're using the Symfony Standard Edition, the bootstrap file is automatically -rebuilt after updating the vendor libraries via the ``composer install`` command. +The class loader used while developing the application is optimized to find +new and changed classes. In production servers, PHP files should never change, +unless a new application version is deployed. That's why you can optimize +Composer's autoloader to scan the entire application once and build a "class map", +which is a big array of the locations of all the classes and it's stored +in ``vendor/composer/autoload_classmap.php``. + +Execute this command to generate the class map (and make it part of your +deployment process too): -Bootstrap Files and Byte Code Caches -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +.. code-block:: bash + + $ composer dump-autoload --optimize --no-dev --classmap-authoritative -Even when using a byte code cache, performance will improve when using a bootstrap -file since there will be fewer files to monitor for changes. Of course, if this -feature is disabled in the byte code cache (e.g. ``apc.stat=0`` in APC), there -is no longer a reason to use a bootstrap file. +* ``--optimize`` dumps every PSR-0 and PSR-4 compatible class used in your + application; +* ``--no-dev`` excludes the classes that are only needed in the development + environment (e.g. tests); +* ``--classmap-authoritative`` prevents Composer from scanning the file + system for classes that are not found in the class map. Learn more ---------- @@ -209,10 +214,9 @@ Learn more .. _`byte code caches`: https://en.wikipedia.org/wiki/List_of_PHP_accelerators .. _`OPcache`: http://php.net/manual/en/book.opcache.php -.. _`opcache.max_accelerated_files`: http://php.net/manual/en/opcache.configuration.php#ini.opcache.max-accelerated-files +.. _`bootstrap file`: https://github.com/sensiolabs/SensioDistributionBundle/blob/master/Composer/ScriptHandler.php +.. _`Composer's autoloader optimization`: https://getcomposer.org/doc/articles/autoloader-optimization.md .. _`APC`: http://php.net/manual/en/book.apc.php .. _`APCu Polyfill component`: https://github.com/symfony/polyfill-apcu .. _`APCu PHP functions`: http://php.net/manual/en/ref.apcu.php -.. _`autoload.php`: https://github.com/symfony/symfony-standard/blob/master/app/autoload.php -.. _`bootstrap file`: https://github.com/sensiolabs/SensioDistributionBundle/blob/master/Composer/ScriptHandler.php .. _`cachetool`: https://github.com/gordalina/cachetool pFad - Phonifier reborn

Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.

Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.


Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy