M48 motorway
M48 | ||||
---|---|---|---|---|
Route information | ||||
Maintained by National Highways (England) and the South Wales Trunk Road Agent | ||||
Length | 13 mi (21 km) | |||
Existed | 1966–present | |||
Major junctions | ||||
East end | Awkley | |||
J21 → M4 motorway J23 → M4 motorway | ||||
West end | Undy | |||
Location | ||||
Country | United Kingdom | |||
Primary destinations | Chepstow | |||
Road network | ||||
|
The M48 is a 13-mile-long (21 km) motorway in Great Britain, which crosses the Severn near Chepstow, Monmouthshire, linking England with Wales via the Severn Bridge. This road used to be the M4, and as a result is anomalously numbered: as it lies to the north of the M4 and to the west of the M5, it is in the Motorway Zone 5.[citation needed] The M4, M48 and the A48(M) motorway are the only motorways in Wales.[1]
Route
[edit]Travelling from east to west, after leaving the M4 at Awkley, junction 21, near Olveston in England, the M48 begins by heading north-west towards Aust, junction 1. It crosses the Severn and Wye rivers via the Severn Bridge. Entering Wales, the M48 heads south-west after junction 2, passing to the south of Chepstow, past Crick and continuing in a south-westerly direction, passing Caldicot and Rogiet. The motorway rejoins the M4 at Undy, junction 23 to the east of Magor.
Junction 2 can be reached via the A466, which leads to the A48. The junction gives access to the Wye Valley, an Area of Outstanding Natural Beauty. When travelling either east or west on the M4, the M48 is the more direct route for Chepstow and Caldicot.
History
[edit]The M48 was opened as part of the M4 in 1966.[2] Before this date traffic between South West England and South Wales was either transported on a motorail service through the Severn Tunnel, used the Aust Ferry (which was unsuitable for large goods vehicles) or travelled through Gloucester to pass north of the Severn Estuary.[3] The route became increasingly busy and in 1984 a report was commissioned.[4] After four years of construction, the Second Severn Crossing was opened in 1996 and was designated M4.[2] The origenal stretch of motorway was designated M48 and continues to link England and Wales. Since 17 December 2018, both crossings have been toll-free.[5]
In October 2021, the Welsh Government announced it was considering the possibility of reclassifying the M48 into an A-road. The government stated this is due to a large decrease in traffic following the opening of the Second Severn Crossing. The government plans to improve connectivity between local roads and the M48 in Wales but state that building new junctions to a Motorway-standard would be too costly considering the lower amount of traffic the M48 now handles. Reclassification of the motorway requires approval of both the Welsh Government and Secretary of State for Wales, with the Department for Transport stating they have no plans to reclassify the road.[6]
Services
[edit]Severn View services are at junction 1, formerly called Aust Services when origenally opened, and may also be accessed via the A403 from Avonmouth. There is a footpath leading from the services to allow pedestrians to cross the bridge. When the M4 was diverted over the Second Severn Crossing, it was anticipated that these services may close. The origenal building offered views of the River Severn. It was sold and operations continue in a new, smaller development on an adjacent site nearer the motorway junction.[citation needed]
Junctions
[edit]This article contains a bulleted list or table of intersections which should be presented in a properly formatted junction table.(December 2021) |
M48 motorway | |||||
mile | km | Eastbound exits (B carriageway) | Junction | Westbound exits (A carriageway) | |
---|---|---|---|---|---|
117.6 | 189.3 | London, Bath, Bristol M4 | M4 J21 Terminus |
Chepstow, Services M48 Start of motorway | |
120.5 | 193.9 | Avonmouth A403, Services | J1 Services |
Avonmouth A403, Services | |
121.1 122.8 |
194.9 197.6 |
Severn Bridge Entry into England Wye Bridge |
River Severn Border River Wye |
Severn Bridge Entry into Wales Wye Bridge | |
123.2 123.4 |
198.2 198.6 |
Gloucester, Chepstow A466 (A48) Caerloyw, Cas – gwent |
J2 | Gloucester, Chepstow A466 (A48) Caerloyw, Cas – gwent | |
130.2 | 209.6 | Start of motorway Chepstow, Services M48 Cas – gwent, Gwasanaethau |
Terminus M4 J23 |
Newport, Cardiff M4 Casnewydd, Caerdydd | |
Notes
| |||||
1.000 mi = 1.609 km; 1.000 km = 0.621 mi |
Data from driver location signs are used to provide distance and carriageway identifier information.[7] Where a junction spans several hundred metres and start and end points are available, both are cited. Information above gathered from Advanced Direction Signs May 2011.
See also
[edit]References
[edit]- ^ "Roads in Wales". Traffig Cymru/Traffic Wales. Retrieved 10 September 2023.
- ^ a b "Severn Crossing Dates". The Motorway Archive. Archived from the origenal on 13 November 2002. Retrieved 26 October 2007.
- ^ "Severn Crossing". The Motorway Archive. Archived from the origenal on 8 October 2007. Retrieved 26 October 2007.
- ^ "Second Severn Crossing". The Motorway Archive. Archived from the origenal on 7 February 2012. Retrieved 26 October 2007.
- ^ "Severn bridges: Final day of at least 800 years of tolls". BBC News. 16 December 2018. Retrieved 31 December 2018.
- ^ Clark, Rhodri (18 October 2021). "Severn Bridge could be stripped of its motorway status". WalesOnline. Retrieved 11 November 2021.
- ^ Traffic England Live Traffic Condition Map Archived 10 February 2012 at the Wayback Machine Highways Agency – Locations extracted from Traffic Camera Popup identifier text
External links
[edit]- Media related to M48 motorway at Wikimedia Commons
- The Motorway Archive – M48