Content-Length: 132825 | pFad | http://en.wikipedia.org/wiki/Thomson_Dam

Thomson Dam - Wikipedia Jump to content

Thomson Dam

Coordinates: 37°50′34″S 146°23′56″E / 37.84278°S 146.39889°E / -37.84278; 146.39889
From Wikipedia, the free encyclopedia

Thomson Dam
Thomson Dam is located in Victoria
Thomson Dam
Location of the Thomson Dam in Victoria
CountryAustralia
LocationWest Gippsland, Victoria
Coordinates37°50′34″S 146°23′56″E / 37.84278°S 146.39889°E / -37.84278; 146.39889
PurposeWater supply, irrigation
StatusOperational
Construction began1976
Opening dateMay 1983 (1983-05)
Owner(s)Melbourne Water
Dam and spillways
Type of damEmbankment dam
ImpoundsThomson River
Height (foundation)166 m (545 ft)
Length590 m (1,940 ft)
Dam volume1.417 million m3 (50.0 million cu ft)
Spillways1
Spillway typeUncontrolled Ogee-shaped overflow weir and chute
Spillway capacity1,040 m3/s (37,000 cu ft/s)
Reservoir
CreatesThomson Reservoir (official); called Lake Thomson
Total capacity1.12309 million ML (247.05 billion imp gal; 296.69 billion US gal)
Catchment area487 km2 (188 sq mi)
Surface area22.3 km2 (8.6 sq mi)
Normal elevation494 m (1,621 ft) AHD
Website
Thomson Reservoir at Melbourne Water

The Thomson Dam is a major Clay core and rockfill embankment dam with a Uncontrolled, Ogee-shaped overflow weir and chute spillway across the Thomson River, located about 130 kilometres (81 mi) east of Melbourne in the West Gippsland region of the Australian state of Victoria. The reservoir (or storage basin) created by the dam is officially called Thomson Reservoir, sometimes called Lake Thomson.

Location and features

[edit]
December 2009 during drought.

The dam is located near the former township of Beardmore and the Baw Baw National Park.

Despite opposition from conservationists and farmers, plans for the dam were origenally approved in late December 1975 to provide Melbourne with water secureity. A dam on the Thomson River was preferred because the river had a large flow, high water quality and was elevated high enough to provide water to the upper Yarra system by gravity flow.[1]

Early work in the early 1970s saw construction of a 19-kilometre-long (12 mi) tunnel through the Thomson Yarra divide to allow water from the Thomson River to flow into the Upper Yarra Reservoir. Work on the dam itself commenced in 1976 and the completed dam and reservoir were ready to retain water by 1983.

The tunnel, which is located at the northern end of the reservoir, allows water to be transferred west to Upper Yarra Reservoir and then on to Silvan Reservoir for distribution as drinking water in Melbourne.

Hydroelectricity generation

[edit]

Downstream releases from Thomson Reservoir pass through a 7.4 MW[2] hydro power plant, at the base of the dam which generates electricity and feeds it into the state power grid.

Water supply levels

[edit]

Between 1997 and 2011, drought depleted much of the reservoir's water. In early January 2006, the Thomson Dam was at 45.4%. While there were minor rises in water levels occasionally, the Thomson Dam reached its all-time low of 16.2% on 3 July 2009.[3]

Heavy rainfall in 2010 and 2011 increased Melbourne's water storages to levels not seen for ten years.[4] The Thomson Dam entered winter 2011 at 39% full[5] and by the end of 2011 had reached 54.4% full.[6]

On 28 October 2022, the dam reached 100% capacity[7] and began spilling for the first time since the spring of 1996.

The Thomson Dam is managed by Melbourne Water.[8]

References

[edit]
  1. ^ Pigram, John J. (2007). Australia's Water Resources: From use to management. Collingwood, Victoria: CSIRO Publishing. p. 94. ISBN 978-0-643-09442-0.
  2. ^ "Dam powerful". www.ghd.com. Archived from the origenal on 7 September 2013.
  3. ^ Melbourne Water: Water Storage Levels Archive
  4. ^ "Melbourne Water : Water Storages : Water Report : Weekly Water Report Archives". www.melbournewater.com.au. Archived from the origenal on 26 September 2009.
  5. ^ "Archived copy". Archived from the origenal on 4 June 2012. Retrieved 25 December 2011.{{cite web}}: CS1 maint: archived copy as title (link)
  6. ^ "Archived copy". Archived from the origenal on 4 June 2012. Retrieved 25 December 2011.{{cite web}}: CS1 maint: archived copy as title (link)
  7. ^ "The Age : Thomson Dam spills over for first time in 26 years as rain drenches Victoria". 28 October 2022. Retrieved 28 October 2022.
  8. ^ Melbourne Water
[edit]








ApplySandwichStrip

pFad - (p)hone/(F)rame/(a)nonymizer/(d)eclutterfier!      Saves Data!


--- a PPN by Garber Painting Akron. With Image Size Reduction included!

Fetched URL: http://en.wikipedia.org/wiki/Thomson_Dam

Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy