The Conroy Virtus was a proposed American large transport aircraft intended to carry the Space Shuttle. Designed, beginning in 1974, by John M. Conroy of the Turbo-Three Corporation, it was to incorporate a pair of Boeing B-52 Stratofortress fuselages to form a new craft using existing parts for cost-savings.[1][2] While the project was seriously considered, it proved impractically large and NASA chose to develop the Boeing 747–based Shuttle Carrier from surplus commercial aircraft instead.

Virtus
Artist's concept of the Virtus
Role Outsized cargo aircraft
National origin United States
Manufacturer Turbo-Three Corporation
Designer John M. Conroy
Status Canceled
Primary user NASA
Developed from Boeing B-52 Stratofortress

History

edit

The Space Shuttle was originally designed to use on-board turbofan engines for propulsion within the atmosphere on re-entry and for ferry flights between landing sites, such as Edwards Air Force Base, the White Sands Missile Range or contingency landing sites such as Easter Island, to the launch site at Kennedy Space Center at Cape Canaveral.[3] When the air-breathing engines were deleted from the Shuttle design due to cost and weight concerns, a requirement arose for a transport aircraft capable of carrying the Shuttle from landing sites back to the Kennedy Space Center.[4] One early design for a shuttle carrier aircraft was proposed by John M. Conroy, developer of the Pregnant Guppy and Super Guppy oversized cargo aircraft, in cooperation with the NASA Langley Research Center; named Virtus, a contract was issued for design and development work in 1974.[2]

Expected to cost US$12.5 million each (equivalent to $60.1 million in 2023), Virtus was a twin-fuselage design powered by four large jet engines; it was intended for these to be Pratt & Whitney JT9D turbofans.[2][4] Conroy proposed extensive use of 'off the shelf' military parts in the design to reduce costs; this included the use of fuselages from Boeing B-52 Stratofortress strategic bombers to form the aircraft's main fuselage pods, added to a new wing and tail section.[2][5] The Space Shuttle Orbiter would be carried under the center section of the Virtus aircraft's wing, between the fuselages; other large cargoes, including the Space Shuttle external tank, the Space Shuttle Solid Rocket Boosters, or dedicated cargo pods, could be alternatively carried.[4][2][5]

The Virtus design was tested in the NASA Langley wind tunnel; while the results of the wind tunnel tests were considered promising, the drawbacks of such a large design, including the cost of developing an entirely new aircraft, flight testing the design and the sheer size of the aircraft requiring the development and/or expansion of infrastructure to support it, militated against further development of Virtus.[4][5] The Lockheed Corporation, which had proposed a twin-fuselage version of its C-5 Galaxy airlifter to carry the Shuttle, also saw its proposal rejected for the same reasons.[4] A more modest conversion of existing C-5s was proposed and nearly taken up by NASA but it was determined that having aircraft continually available was preferable to being restricted by the United States Air Force on the use of C-5s and a proposal by Boeing for a conversion of the 747 airliner was selected, becoming the Shuttle Carrier Aircraft.[4] A proposed commercial version of the Virtus design, named Colossus, also failed to gain any further interest, and the Virtus design was abandoned.[6][7]

Specifications

edit

Data from Lowther 2012[5]

General characteristics

Performance

  • Cruise speed: 300 mph (480 km/h, 260 kn)
  • Range: 3,000 mi (4,800 km, 2,600 nmi)
  • Service ceiling: 35,000 ft (11,000 m)

See also

edit

Related development

Aircraft of comparable role, configuration, and era

References

edit
  1. ^ "Feasibility Study to Consider an Aircraft for the Air Launch and Air Transportation of the Space Shuttle Orbiter". 1974.
  2. ^ a b c d e "Space Shuttle Orders Giant Plane Developed". newspapers.com. The Modesto Bee. February 13, 1974. p. A17. Retrieved April 1, 2023.
  3. ^ Lowther 2012, p. 26.
  4. ^ a b c d e f Jenkins 2001, p. 195.
  5. ^ a b c d Lowther 2012, p. 28.
  6. ^ Cargo Aircraft, volume 64. R. H. Donnelley Corp., 1974.
  7. ^ Lowther 2012, p. 29.

Bibliography

edit
edit
pFad - Phonifier reborn

Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.

Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.


Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy