Jump to content

Sodium tetrachloroaurate

From Wikipedia, the free encyclopedia
Sodium tetrachloroaurate

__ Na+      __ Au3+      __ Cl
Names
IUPAC name
Sodium tetrachloroaurate (III)
Other names
Sodium gold chloride, yellow gold chloride
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.035.659 Edit this at Wikidata
EC Number
  • 239-241-3
UNII
  • InChI=1S/Au.4ClH.Na/h;4*1H;/q+3;;;;;+1/p-4
  • [Na+].Cl[Au-](Cl)(Cl)Cl
Properties
NaAuCl4
Molar mass 361.756 g/mol
Appearance Orange powder
Density 3.81 g cm−3[2]
anhydrous: 139g/100ml (10°C) 151g/100ml (20°C) 900g/100ml (60°C)[3]
Solubility Sparingly soluble in diethyl ether,[4] soluble in alcohol, ether[3]
Hazards[5]
GHS labelling:
GHS05: CorrosiveGHS07: Exclamation mark
Danger
H315, H319, H335
P261, P264, P271, P280, P302+P352, P304+P340, P305+P351+P338, P312, P330, P332+P313, P333+P313, P337+P313, P363, P403+P233, P405, P501
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Sodium tetrachloroaurate is an inorganic compound with the chemical formula NaAuCl4. It is composed of the ions Na+ and AuCl4. It exists in the anhydrous and dihydrate states. At room temperature, it exists as a golden-orange solid. The anhydrous and dihydrate forms are available commercially.[1]

Preparation

[edit]

The conventional method of preparation of sodium tetrachloroaurate involves the addition of tetrachloroauric acid solution to sodium chloride or sodium carbonate to form a mixture. The mixture is stirred at 100 °C, and then subjected to evaporation, cooling, crystallization, and drying to obtain the orange crystals of sodium tetrachloroaurate.[4][6]

H[AuCl4] + NaCl → Na[AuCl4] + HCl
2 H[AuCl4] + Na2CO3 → 2 Na[AuCl4] + H2O + CO2

However, more efficient preparation methods have been discovered recently. These are the addition of gold with sodium oxy-halogen salts and hydrochloric acid.[6]

Uses

[edit]

It is used in a wide range of applications. For example, it is used as a catalyst for the hydrochlorination of acetylene, or the oxidation of sulfides.[4]

References

[edit]
  1. ^ a b PubChem. "Sodium tetrachloroaurate". pubchem.ncbi.nlm.nih.gov. Retrieved 2019-05-19.
  2. ^ Jones, P. G.; Hohbein, R.; Schwarzmann, E. (1988-07-15). "Anhydrous sodium tetrachloroaurate(III)". Acta Crystallographica Section C Crystal Structure Communications. 44 (7). International Union of Crystallography (IUCr): 1164–1166. Bibcode:1988AcCrC..44.1164J. doi:10.1107/s0108270188002756. ISSN 0108-2701.
  3. ^ a b Perry, Dale L. (2011). Handbook of Inorganic Compounds. CRC Press; 2 edition (May 18, 2011). p. 380. ISBN 9781439814611.
  4. ^ a b c Westcott, Stephen A. (2001), "Sodium Tetrachloroaurate(III)", Encyclopedia of Reagents for Organic Synthesis, American Cancer Society, doi:10.1002/047084289x.rs108, ISBN 9780470842898
  5. ^ "Sodium Tetrachloroaurate". www.espimetals.com. Retrieved 2019-05-20.
  6. ^ a b US 10046976, Lu, Lin; Wang, Chen-Hsiang & Fan, Kuei-Sheng et al., "Method of making inorganic gold compound", published 2018-08-14, assigned to Tripod Technology Corp. 
pFad - Phonifier reborn

Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.

Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.


Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy