What's Changed

• Update blocklist of unsafe commands by @JohnAZoidberg in #187

Full Changelog: v0.4.4...v0.4.5

What's Changed

• ccgx: derive Ord for AppVersion and BaseVersion by @JohnAZoidberg in #175
• Add support for EC_CMD_REBOOT_AP_ON_G3 by @JohnAZoidberg in #181
• --inputdeck: On FW16 also print sleep_l gpio state by @JohnAZoidberg in #179
• Update docs by @JohnAZoidberg in #176
• Current and charge rate limit cannot be read by @JohnAZoidberg in #182
• uefi: Fix shell args when run from a script by @JohnAZoidberg in #185
• Add --feature readonly, to build a bin without risky commands by @JohnAZoidberg in #141
• Bump to v0.4.4 by @JohnAZoidberg in #186

Full Changelog: v0.4.3...v0.4.4

Example Command

Example Commands

winget install FrameworkComputer.framework_tool

What's Changed

• gh-actions: Split UEFI build into separate action by @JohnAZoidberg in #151
• esrt: Add framework desktop GUID by @JohnAZoidberg in #152
• MEC detection: Fail if permission denied by @JohnAZoidberg in #154
• Add devenv.nix by @JohnAZoidberg in #155
• esrt: fix ESRT GUID for EFI device by @aokblast in #156
• --versions: Show any number of PD versions by @JohnAZoidberg in #157
• Fix formatting by @JohnAZoidberg in #158
• ec_binary: Make it less misleading if legacy cookie not found by @JohnAZoidberg in #159
• EXAMPLES: Add intel core ultra by @JohnAZoidberg in #161
• README: Explain how to install with winget by @JohnAZoidberg in #162
• chromium_ec: Erase EC in sections by @JohnAZoidberg in #160
• EXAMPLES: Document fingerprint reader brightness by @JohnAZoidberg in #164
• Show ALS sensor on unknown systems by @JohnAZoidberg in #163
• Add support for dynamic number of PDs by @JohnAZoidberg in #166
• Add debug commands to disable/enable and reset PD controller by @JohnAZoidberg in #165
• README: Add nix-shell by @JohnAZoidberg in #168
• portio_mec: Don't print init by @JohnAZoidberg in #169
• Correctly identify right and left PD controllers by @JohnAZoidberg in #170
• framework_tool: Add copyright into .exe properties by @JohnAZoidberg in #172
• Fix remap key docstring by @jodavaho in #173
• fw16: add command to write and read expansion bay eeprom by @kiram9 in #171
• Bump version to 0.4.3 by @JohnAZoidberg in #167

New Contributors

• @aokblast made their first contribution in #156
• @jodavaho made their first contribution in #173

Full Changelog: v0.4.2...v0.4.3

What's Changed

• --expansion-bay: Print PCIe config by @JohnAZoidberg in #138
• --get-gpio: Return all GPIOs if no name was passed by @JohnAZoidberg in #142
• --sensors: Get information about sensors by @JohnAZoidberg in #143
• Add --ps2-enable to control ps2 emulation by @JohnAZoidberg in #139
• Cleanup --versions command to hide unnecessary details by @JohnAZoidberg in #146
• Allow keyboard remapping by @JohnAZoidberg in #145
• Build Rufus compatible ISO by @JohnAZoidberg in #149
• Allow installing with cargo install by @JohnAZoidberg in #147
• Allow flashing EC RW region by @JohnAZoidberg in #150

Full Changelog: v0.4.1...v0.4.2

What's Changed

• Fix charge limit based on battery charge by @JohnAZoidberg in #123
• Split I2C tunneling out of ccgx module by @JohnAZoidberg in #112
• chromium_ec: Use portio if /dev/cros_ec does not exist by @JohnAZoidberg in #124
• chromioum_ec: Autodetect Microchip EC when using portio by @JohnAZoidberg in #125
• --version: Add revision of mainboard by @JohnAZoidberg in #127
• --inputdeck: Fix Chassis Closed status by @JohnAZoidberg in #130
• Don't require PD config if platform isn't detected by @JohnAZoidberg in #129
• Simplify features and detect based on OS by @JohnAZoidberg in #126
• windows: Run --versions command if double-clicked by @JohnAZoidberg in #132
• --thermal: Add Framework 12 charger IC temp and unknown sensors by @JohnAZoidberg in #135
• windows: Fix --console follow by @JohnAZoidberg in #136
• Bump version to 0.4.1 by @JohnAZoidberg in #133
• More examples by @JohnAZoidberg in #137

Full Changelog: v0.4.0...v0.4.1

Find examples for how to use here

What's Changed

• framework_uefi: Document how to build on Windows by @JohnAZoidberg in #102
• Don't show retimer as unknown if none present by @JohnAZoidberg in #103
• gh-actions: Disable FreeBSD builds by @JohnAZoidberg in #105
• chromium_ec: Add adc_read by @JohnAZoidberg in #108
• freebsd: Remove warning by @JohnAZoidberg in #110
• chromium_ec: Fix reading EC console by @JohnAZoidberg in #106
• Fix windows clippy lint by @JohnAZoidberg in #111
• power: Detect number of fans and report all of them by @JohnAZoidberg in #113
• Revert "gh-actions: Disable FreeBSD builds" by @JohnAZoidberg in #115
• Allow custom fan speed control by @JohnAZoidberg in #114
• Show firmware version of Framework 16 Inputmodules by @JohnAZoidberg in #104
• Add more EXAMPLES by @JohnAZoidberg in #116
• Add --expansion-bay command to print info by @JohnAZoidberg in #107
• --input-deck: Print Framework12 and Framework 13 input deck status by @JohnAZoidberg in #109
• touchscreen_win: Find the right path with hidapi by @JohnAZoidberg in #119
• Chargerate by @JohnAZoidberg in #117
• Improve commandline output by @JohnAZoidberg in #121
• Get information from USI Stylus by @JohnAZoidberg in #118
• Add command to set EC hibernation delay by @JohnAZoidberg in #122
• Bump version to 0.4.0 by @JohnAZoidberg in #120

Full Changelog: v0.3.0...v0.4.0

What's Changed

• Add export and Debug deriving by @JohnAZoidberg in #78
• Update dependencies by @JohnAZoidberg in #79
• Add support for Framework 2nd Gen Event platforms by @JohnAZoidberg in #81
• Add command to toggle tablet mode by @JohnAZoidberg in #82
• fp-brightness: Add support for V1 host command by @JohnAZoidberg in #85
• framework_lib: Add ultra-low powerbutton brightness by @JohnAZoidberg in #83
• Add accelerometer support by @JohnAZoidberg in #86
• chromium: Add device_complete to diags by @JohnAZoidberg in #87
• Add support for RGB command by @JohnAZoidberg in #84
• freebsd: Build with latest stable on gh actions by @JohnAZoidberg in #89
• camera: Print firmware version of camera by @JohnAZoidberg in #88
• camera: Don't crash if something's wrong by @JohnAZoidberg in #93
• touchpad: Show IC type and firmware version by @JohnAZoidberg in #94
• Fix H2O capsule analysis by @JohnAZoidberg in #92
• windows: Upload release binary by @JohnAZoidberg in #99
• windows: Don't panic if driver not installed by @JohnAZoidberg in #100
• framework12: Support reading touchpad version by @JohnAZoidberg in #97
• touchscreen: Dump firmware version and protocol by @JohnAZoidberg in #90
• add commands to read/write gpu serial by @kiram9 in #98
• Add completions for ZSH and Bash by @bsdlme in #96

New Contributors

• @bsdlme made their first contribution in #96

Full Changelog: v0.2.1...v0.3.0

What's Changed

• ccgx: Format PD version as decimal on 11th Gen by @JohnAZoidberg in #75
• Bump to v0.2.1 by @JohnAZoidberg in #77

Full Changelog: v0.2.0...v0.2.1

This is a Linux (and Windows) tool to update the firmware. Should be used in conjunction with our guide at: HDMI Expansion Card power saving rework
The tools here replace the proprietary windows tools linked in the guide.
**NOTE: ** HDMI firmware MUST only be updated if you have done the rework!

The DP and HDMI Expansion cards have a CCG3 PD controller with firmware.
The firmware has two sides so that it can never be bricked. Only one side is active at a time.

Firmware Versions

Check Version

dp_hdmi_version displays the current firmware version.
Example:

> ./dp_hdmi_version 
HDMI Expansion Card
  Serial Number:        11AD1D00B21A3F05471C0B00
  Active Firmware:      104 (3.0.16.104)
  Inactive Firmware:    105 (3.0.16.105)
  Operating Mode:       MainFw (#2)
DisplayPort Expansion Card
  Serial Number:        11AD1D0030123F17142C0B00
  Active Firmware:      101 (3.0.17.101)
  Inactive Firmware:    008 (3.0.17.8)
  Operating Mode:       MainFw (#2)

Update Version

To update a card to a particular version, use the corresponding binary.
It will update all compatible connected cards.
For example:

> ./hdmi_update_105
File Firmware:
  HDMI Expansion Card
  3.0.16.105

Updating HDMI Expansion Card with SN: "11AD1D00B21A3F05471C0B00"
Before Updating
  Active Firmware:      5 (3.0.16.5)
  Inactive Firmware:    5 (3.0.16.5)
  Operating Mode:       BackupFw (#1)
Updating...
  Updating Firmware Image 2
  Firmware Update done.
  Waiting for Expansion Card to restart
After Updating
  Active Firmware:      105 (3.0.16.105)
  Inactive Firmware:    105 (3.0.16.5)
  Operating Mode:       MainFw (#2)