What's Changed

• feat(wb0): add STM32WB0x support by @fpistm in #127

Full Changelog: 1.4.0...1.5.0

What's Changed

• fix(h7): missing regulator state in STOP mode by @fpistm in #116
• feat(u3): deepSleep by @fpistm in #121
• feat: support PWR wake-up source selection by @fpistm in #120

Full Changelog: 1.3.0...1.4.0

What's Changed

• feat(WBA): add STM32WBAxx support by @fpistm in #108
• fix(example): properly end Serial when STOP2 mode is used by @fpistm in #112
• feat(u0): add STM32U0xx LowPower support by @fpistm in #113

Full Changelog: 1.2.5...1.3.0

What's Changed

• setAlarmTime : fix index in the table nb of days in a monthes by @FRASTM in #95
• doc: update RTC clock source description by @fpistm in #100
• chore: enhance shutdown mode by @fpistm in #106
• sketch using the Rtc mix mode with value in milliseconds by @FRASTM in #103

Full Changelog: 1.2.4...1.2.5

What's Changed

• Reduce flash footprint by @tshcherban in #91

New Contributors

• @tshcherban made their first contribution in #91

Full Changelog: 1.2.3...1.2.4

What's Changed

• fix(wb): HAL_PWREx_ControlVoltageScaling is not for all STM32WB by @fpistm in #86
• fix: set CPU2 low power mode for STM32WBxx by @fpistm in #87
• feat(C0): Add C0 LowPower support by @fpistm in #88

Full Changelog: 1.2.2...1.2.3

What's Changed

• fix: STM32G070 compilation issue by @ABOSTM in #84

Full Changelog: 1.2.1...1.2.2

What's Changed

• Fix LowPower Sleep Mode by @ABOSTM in #74
• fix: ExternalWakeup: assign a PinNumber to USER_BTN by @ABOSTM in #77
• fix(ExternalWakeup): customization may be needed depending on button implementation by @ABOSTM in #78
• fix: clear Wakeup Flag before entering Standby or Shutdown mode by @ABOSTM in #81

Full Changelog: 1.2.0...1.2.1

What's Changed

• Added STM32RTC as a requirement by @TTMaZa in #65
• stm32L4+ going to STOP2 lowpower mode must keep SRAM3 by @FRASTM in #66

New Contributors

• @TTMaZa made their first contribution in #65

Full Changelog: 1.1.1...1.2.0

• drivers: use register definition instead of serie name
• fix: check wakeup pin and avoid to use it uninitailized
• bsp: add support for the STM32U5xx soc