Blynk and WiFiManager Library for configuring/auto(re)connecting ESP8266/ESP32 modules to the best or available MultiWiFi APs and MultiBlynk servers at runtime, with or without SSL. Configuration data saved in either SPIFFS or EEPROM.

Simple GSM shield Manager for Blynk and ESP32 / ESP8266 boards, with or without SSL, configuration data saved in SPIFFS / EEPROM. This library enables user to include both Blynk GSM/GPRS and WiFi libraries in one sketch, run both WiFi and GSM/GPRS simultaneously, or select one to use at runtime after reboot.

Blynk flow sensor water meter to measure water consumption using Blynk, NodeMCU and Water Flow Sensor (I used YF-S201B).

Simple WiFiManager for Blynk and ESP8266/ESP32 (including ESP32-S2, ESP32-C3) with or without SSL, configuration data saved in either LittleFS, SPIFFS or EEPROM. This library, using AsyncWebServer instead of (ESP8266)WebServer, for configuring/auto(re)connecting ESP8266/ESP32 modules to best or available MultiWiFi APs and MultiBlynk servers at r…

Enable inclusion of both ESP32 Blynk BT / BLE and WiFi libraries. Then run both WiFi and BT/BLE simultaneously, or select one to use at runtime after reboot. Eliminate hardcoding your Wifi and Blynk credentials and configuration data saved in either SPIFFS or EEPROM.

💡 This project proposes an IoT based fall detection and rescue system. The main objective here is to alert the user as well as a guardian/ doctor if there is a possibility of fall.

A project that logs data from sofar solar inverter and sends the data to blynk server using RS485 modbus interface.

Tools for working with Blynk IoT Platform

This repository focuses on the IDEA LAB for 1st and 2nd semester students using SST-IoT-Board. Feel free to open PR's

Blynk ESP8266 (NodeMCU) Program for PZEM 004T v3.0 Power Meter.

Controlling the lights in your house using your voice is a great way to dip your toes into the smart homeworld. And if you already have a smartphone you can build your own smart switch using a few bucks.

Платформа с приложением для iOS и Android для управления Arduino, ESP8266, Raspberry Pi и других плат микроконтроллеров через Интернет.

Here are the Programs that can be done on a SST IoT Node MCU ESP8266 Board.

Basic sensor alarm system made with ESP8266 and HC-SR04.

Wemos D1mini and DHT22 control relay for Bathroom ventilator

This repository focuses on Programs that can be achieved using SST IoT Development Board which is an ESP32 Development Kit

Blynk PZEM 004T 3 Phase failure motor automation.

Install the Blynk server on Raspberry Pi