chore(deps): update all dependencies #43

renovate · 2025-03-29T17:42:42Z

This PR contains the following updates:

Package	Type	Update	Change
MarcoIeni/release-plz-action	action	digest	`4cd77ee` -> `8e91c71`
crate-ci/typos	action	digest	`d08e408` -> `718c4ff`
pnpm (source)	packageManager	minor	`10.6.5` -> `10.7.0`
taiki-e/install-action	action	digest	`5651179` -> `1c861c2`

Release Notes

pnpm/pnpm (pnpm)

`v10.7.0`

Compare Source

Minor Changes

pnpm config get and list also show settings set in pnpm-workspace.yaml files #9316.
It should be possible to use env variables in pnpm-workspace.yaml setting names and value.
Add an ability to patch dependencies by version ranges. Exact versions override version ranges, which in turn override name-only patches. Version range * is the same as name-only, except that patch application failure will not be ignored.

For example:
```
patchedDependencies:
  foo: patches/foo-1.patch
  foo@^2.0.0: patches/foo-2.patch
  foo@2.1.0: patches/foo-3.patch
```
The above configuration would apply patches/foo-3.patch to foo@2.1.0, patches/foo-2.patch to all foo versions which satisfy ^2.0.0 except 2.1.0, and patches/foo-1.patch to the remaining foo versions.
[!WARNING]
The version ranges should not overlap. If you want to specialize a sub range, make sure to exclude it from the other keys. For example:
```
# pnpm-workspace.yaml
patchedDependencies:
  # the specialized sub range
  'foo@2.2.0-2.8.0': patches/foo.2.2.0-2.8.0.patch
  # the more general patch, excluding the sub range above
  'foo@>=2.0.0 <2.2.0 || >2.8.0': 'patches/foo.gte2.patch
```
In most cases, however, it's sufficient to just define an exact version to override the range.
pnpm config set --location=project saves the setting to a pnpm-workspace.yaml file if no .npmrc file is present in the directory #9316.
Rename pnpm.allowNonAppliedPatches to pnpm.allowUnusedPatches. The old name is still supported but it would print a deprecation warning message.
Add pnpm.ignorePatchFailures to manage whether pnpm would ignore patch application failures.

If ignorePatchFailures is not set, pnpm would throw an error when patches with exact versions or version ranges fail to apply, and it would ignore failures from name-only patches.

If ignorePatchFailures is explicitly set to false, pnpm would throw an error when any type of patch fails to apply.

If ignorePatchFailures is explicitly set to true, pnpm would print a warning when any type of patch fails to apply.

Patch Changes

Remove dependency paths from audit output to prevent out-of-memory errors #9280.

Configuration

📅 Schedule: Branch creation - "* 0-3 1 * *" (UTC), Automerge - At any time (no schedule defined).

🚦 Automerge: Enabled.

♻ Rebasing: Whenever PR is behind base branch, or you tick the rebase/retry checkbox.

👻 Immortal: This PR will be recreated if closed unmerged. Get config help if that's undesired.

If you want to rebase/retry this PR, check this box

This PR was generated by Mend Renovate. View the repository job log.

coderabbitai · 2025-03-29T17:42:50Z

Important

Review skipped

Bot user detected.

To trigger a single review, invoke the @coderabbitai review command.

You can disable this status message by setting the reviews.review_status to false in the CodeRabbit configuration file.

Thanks for using CodeRabbit! It's free for OSS, and your support helps us grow. If you like it, consider giving us a shout-out.

❤️ Share

🪧 Tips

Chat

There are 3 ways to chat with CodeRabbit:

Review comments: Directly reply to a review comment made by CodeRabbit. Example:
- I pushed a fix in commit <commit_id>, please review it.
- Generate unit testing code for this file.
- Open a follow-up GitHub issue for this discussion.
Files and specific lines of code (under the "Files changed" tab): Tag @coderabbitai in a new review comment at the desired location with your query. Examples:
- @coderabbitai generate unit testing code for this file.
- @coderabbitai modularize this function.
PR comments: Tag @coderabbitai in a new PR comment to ask questions about the PR branch. For the best results, please provide a very specific query, as very limited context is provided in this mode. Examples:
- @coderabbitai gather interesting stats about this repository and render them as a table. Additionally, render a pie chart showing the language distribution in the codebase.
- @coderabbitai read src/utils.ts and generate unit testing code.
- @coderabbitai read the files in the src/scheduler package and generate a class diagram using mermaid and a README in the markdown format.
- @coderabbitai help me debug CodeRabbit configuration file.

Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments.

CodeRabbit Commands (Invoked using PR comments)

@coderabbitai pause to pause the reviews on a PR.
@coderabbitai resume to resume the paused reviews.
@coderabbitai review to trigger an incremental review. This is useful when automatic reviews are disabled for the repository.
@coderabbitai full review to do a full review from scratch and review all the files again.
@coderabbitai summary to regenerate the summary of the PR.
@coderabbitai generate docstrings to generate docstrings for this PR.
@coderabbitai resolve resolve all the CodeRabbit review comments.
@coderabbitai plan to trigger planning for file edits and PR creation.
@coderabbitai configuration to show the current CodeRabbit configuration for the repository.
@coderabbitai help to get help.

Other keywords and placeholders

Add @coderabbitai ignore anywhere in the PR description to prevent this PR from being reviewed.
Add @coderabbitai summary to generate the high-level summary at a specific location in the PR description.
Add @coderabbitai anywhere in the PR title to generate the title automatically.

CodeRabbit Configuration File (`.coderabbit.yaml`)

You can programmatically configure CodeRabbit by adding a .coderabbit.yaml file to the root of your repository.
Please see the configuration documentation for more information.
If your editor has YAML language server enabled, you can add the path at the top of this file to enable auto-completion and validation: # yaml-language-server: $schema=https://coderabbit.ai/integrations/schema.v2.json

Documentation and Community

Visit our Documentation for detailed information on how to use CodeRabbit.
Join our Discord Community to get help, request features, and share feedback.
Follow us on X/Twitter for updates and announcements.

chore(deps): update all dependencies

3a7d601

renovate bot enabled auto-merge (squash) March 29, 2025 17:42

renovate bot merged commit a2662ba into main Mar 29, 2025
13 checks passed

renovate bot deleted the renovate/all branch March 29, 2025 17:44

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Uh oh!

chore(deps): update all dependencies #43

chore(deps): update all dependencies #43

Uh oh!

renovate bot commented Mar 29, 2025

Uh oh!

coderabbitai bot commented Mar 29, 2025

Review skipped

Chat

CodeRabbit Commands (Invoked using PR comments)

Other keywords and placeholders

CodeRabbit Configuration File (`.coderabbit.yaml`)

Documentation and Community

Uh oh!

Uh oh!

Uh oh!

Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.

Uh oh!

chore(deps): update all dependencies #43

chore(deps): update all dependencies #43

Uh oh!

Conversation

renovate bot commented Mar 29, 2025

Release Notes

v10.7.0

Minor Changes

Patch Changes

Configuration

Uh oh!

coderabbitai bot commented Mar 29, 2025

Review skipped

Chat

CodeRabbit Commands (Invoked using PR comments)

Other keywords and placeholders

CodeRabbit Configuration File (.coderabbit.yaml)

Documentation and Community

Uh oh!

Uh oh!

Uh oh!

Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.

`v10.7.0`

CodeRabbit Configuration File (`.coderabbit.yaml`)