Abstract
Low-power technologies, which have taken over the electronics sector, are being studied in this scientific literature. Power dissipation is an important design parameter in VLSI circuits because it predicts the performance of battery-operated devices, which is important in biomedical and communication applications. It gets more difficult to construct high-performance, low-power systems on a chip, as chip size reduces and device density and complexity rise. Furthermore, due to increased design complexity below the 100 nm node, total power management on a device is becoming a severe concern. Leakage current is also important in the power management of low-power VLSI devices. Because leakage and dynamic power consumption account for a large portion of overall power consumption in micro and nanotechnologies, they are becoming more relevant design factors. In order to increase the battery life of portable devices, VLSI circuit design focuses on reducing leakage and dynamic power. The numerous approaches, tactics and power management techniques that may be employed to construct low-power circuit-based systems are addressed in this scientific literature review.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Chandrakasan AP, Sheng S, Brodersen RW (1992) Low-power CMOS digital design. IEEE J Solid-State Circuits 27:473–484
Rabaey J, Pedram M (1996) Introduction. In: Low power design methodologies, 1st edn. Kluwer, New York, pp 5–16
Chandrakasan AP, Mehra R, Potkonjak M, Rabaey J, Brodersen RW (1995) Optimizing power using transformations. In: IEEE transactions On CAD, pp 13–32
Rabaey J, Pedram M (1996) Algorithm and architectural level methodologies. In: Low power design methodologies 1st edn. Kluwer, New York, pp 335–340
Zhang YX, Lu SL, Mao BQ (2004) A low-power design methodology clock-gating. Microelectron Comput 21:23–26
Yaman Çakmak I, Toms W, Navaridas J (2016) Cyclic power-gating as an alternative to voltage and frequency scaling. IEEE Comput Archit Lett 15:77–80
Shin I, Kim J-J, Shin Y (2015) Aggressive voltage scaling through fast correction of multiple errors with seamless pipeline operation. In: IEEE transactions on circuits and systems I, vol 62, Issue 2, pp 468–477
Benini L, De Micheli G, Macii E (2002) Designing low-power circuits: practical recipes. In: IEEE circuits and systems magazine, vol 1, pp 6–25
Han J, Member, IEEE, Zhang Y, Huang S, Chen M, Zeng X (2016) An area-efficient error-resilient ultra-low-power subthreshold ECG processor. In: IEEE transactions on circuits and systems-II, vol 2
Chen Z, Shott J, Plummer J (1994) CMOS technology scaling for low voltage low power applications. In: ISLPE-98: IEEE international symposium on low power electronics. San Diego, CA, pp 56–57
Bernstein K, Cavin RK, Porod W, Seabaugh A, Welser J (2010) Device and architecture outlook for beyond CMOS switches. Proc IEEE 98(12):2169–2184
Bondyopadhyay PK (2002) Moore’s law governs the silicon revolution. Proc IEEE 88:78–81
Haron NZ, Hamdioui S (2008) Why is CMOS scaling coming to an END? In: Proceedings of the 2008 3rd international design and test workshop, Monastir, Tunisia, pp 98–103
Dennard RH, Gaensslen FH, Yu H-N, Leo Rideovt V, Bassous E, Leblanc AR (2007) Design of ion-implanted MOSFET’s with very small physical dimensions. In: IEEE solid-state circuits society newsletter, vol 12, pp 38–50
International technology roadmap for semiconductors, Process integration devices and structures (PIDS) (2011) http://www.itrs.net/Links/2011ITRS/Home2011.htm
Lent CS, Tougaw PD, Porod W, Bernstein GH (1993) Quantum cellular automata. Nanotechnology 4(1):49–57
Snider GL, Orlov AO, Amlani I et al (1999) Quantum-dot cellular automata: review and recent experiments (invited). J Appl Phys 85(8):4283–4285
Kim SW, Swartzlander EE (2009) Parallel multipliers for quantum-dot cellular automata. In: Proceedings of the 2009 IEEE nanotechnology materials and devices conference, Traverse City, MI, USA, pp 68–72
Kim SW, Swartzlander EE (2010) Multipliers with coplanar crossings for quantum-dot cellular automata. In: Proceedings of the 10th IEEE international conference on nanotechnology, Seoul, Republic of Korea, pp 953–957
Balali M, Rezai A, Balali H, Rabiei F, Emadi S (2017) Towards coplanar quantum-dot cellular automata adders based on efficient three-input XOR gate. Results Phys 7:1989–1995
Sasamal TN, Singh, AK, Mohan A (2016) Efficient design of reversible ALU in quantum-dot cellular automata. Optik 127(15):6172–6182
Sasamal TN, Singh AK, Ghanekar U (2016) Design of non-restoring binary array divider in majority logic-based QCA. Electron Lett 52(24):2001–2003
Kianpour M, Nadooshan RS (2011) A novel modular decoder implementation in quantum-dot cellular automata (QCA). In: Proceedings of the 2011 international conference on nanoscience, technology and societal implications (NSTSI), Bhubaneswar, India, pp 1–5
Kianpour M, Nadooshan RS (2016) A novel quantum dot cellular automata X-bit × 32-bit SRAM. IEEE Trans Very Large Scale Integr (VLSI) Syst 24(3):827–836
Chougule PP, Sen B, Dongale TD (2017) Realization of processing in-memory computing architecture using quantum dot cellular automata. Microprocess Microsyst 52:49–58
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Chauhan, P., Gupta, S. (2023). Challenges and Future Perspectives of Low-Power VLSI Circuits: A Study. In: Agrawal, R., Kishore Singh, C., Goyal, A., Singh, D.K. (eds) Modern Electronics Devices and Communication Systems. Lecture Notes in Electrical Engineering, vol 948. Springer, Singapore. https://doi.org/10.1007/978-981-19-6383-4_46
Download citation
DOI: https://doi.org/10.1007/978-981-19-6383-4_46
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-19-6382-7
Online ISBN: 978-981-19-6383-4
eBook Packages: EngineeringEngineering (R0)